Electronic luxury clock turn off alarm clock on. Electronic clock VST: description, instructions

It’s rare that electronics and equipment are sent to Russia from China with a memo or passport in Russian. If you find yourself in this situation, then most likely you ordered a wall or table clock on Aliexpress or became the owner of a Chinese clock from a store.

In the Aliexpress online hypermarket, there are more than half a million options for the “electronic watches” item – of all sizes, colors and shapes. There are wall and table clocks with buttons, and even floor-standing solutions with thermometers. There are plenty to choose from! But how to set it up?

Most often, the buyer has to independently guess the purpose of the buttons and, using ingenuity and intuition, configure the device.

Fortunately, the experience of numerous users of Chinese products allows us to determine a certain algorithm for trouble-free setting of any electronic clock - wall, table and even floor!

What are the buttons on a wall or table clock responsible for?

To set up Chinese electronics, you will need to figure out what the buttons on the watch mean.

It's very simple.

Workers and important buttons in electronic watches from Aliexpress usually no more than 4. All other buttons are either fake or are responsible for demonstrating a specific function.

To configure, you will need to know the markings:

MODE/MOD – selection. Responsible for switching between categories and parameters. Typically these are the functions “time”, “alarm clock”, “stopwatch”, “date”.
START/SET – input. The area of responsibility includes setting the digital indicator of the selected parameter, that is, directly programming the date or time.
In addition to MODE and SET, there is certainly a RESET key on the device body - to reset the entered data or reboot the product.

Location of the RESET button in products from Aliexpress: in table and wall clocks - usually hidden in the battery compartment or recessed into the back panel of the product.

All other elements of Chinese watch electronics serve to enable or demonstrate individual functions, but are almost never responsible for setting them up:

LIGHT – turn on the backlight;
12/24 – switching between 12-hour time format and 24-hour time format;
MIN/MAX – in products with demonstration of temperature and humidity, it is used to display the minimum and maximum data values for a certain period of time;
C/F – switching temperature indicators in Celsius or Fahrenheit;
ON SC OFF – enable voice mode to quickly activate the screen backlight when it goes into a “sleep” state;
SNZ – delayed alarm start;
ALARM – setting the alarm time;
UP – blocking the “sleep” mode when the device is operating;

Buttons on the back or top panel without markings turn off the alarm when it goes off.

Sometimes manufacturers ignore any labeling options. Then one can navigate “by touch.” Two controls are exactly MOD and SET - “select” and “enter”, one is “select” and “set” at the same time.

In the case of single control, don’t be scared, because everything is simple:

Hold, press the key – “select”.
Short presses – “setting parameters”.

VIDEO INSTRUCTIONS

Setting the date, time and alarm of the electronic wall clock

The standard version of the push-button configuration is SET, MODE, RESET. And it is this that causes the greatest difficulties for users.

In fact, setting up a 3-button digital watch is quite simple.

In them:

MODE – choice.
SET/START – input of digital data.
RESET – reboot and “help” when setting basic parameters.

The sequence of actions is as follows:

Using MODE the parameter is selected. Each function has a certain number of clicks.

For example: one press – time, two presses – date, three presses – alarm clock.

In the absence of instructions, the sequence is determined experimentally; fortunately, there is a unified electronic format for time and dates in the world, and it is quite simple to understand which function appears on the screen.

Setting, that is, switching between numerical indicators by flipping, is carried out either using SET, or using SET and RESET. In the second case SET is responsible for hours and months, RESET – in minutes and days. Although there may be other options, since Chinese products are sometimes unpredictable.
The time on the alarm clock is set in the same way: MODE – selection, other buttons – settings.

The moment of turning off the alarm clock is interesting - this often requires simultaneous pressing of two auxiliary buttons at once.

The peculiarity of Chinese watches is unpredictability. Buttons on devices have different names, are responsible for different functions, or are generally fake. But all this is not scary!

The operating principle of all models is similar and, having understood the basics of setup, you can quickly set the necessary parameters.

Today we want to talk about the alarm clock in the watch. Or rather, even about alarm clocks, because most often there are several of them in a watch [from daily to monthly]. The scope of application of an alarm clock is quite wide, but not everyone uses it to wake up on time? Any event, be it an interesting TV program, or the time of taking medication - you can program an alert for all of this. Moreover, in some Casio models this notification is not only audible, but also flickering, and even a vibration alert [such as the GD-350]. Which type to choose, how to configure and how to enable - you will find all this in our article. If after reading you still have questions, ask.

Use button C to enter alarm mode. You will see one of the indicators AL1, AL2, AL3 or AL4 on the screen.

In alarm mode, use the D button to select one of the alarms. which you want to configure.

Hold button A until the alarm time starts flashing. Release the button.
Press button C to select the option to set [hours, minutes, months, days]

When the desired setting is highlighted, press buttons D and B to adjust it.
To test the alert, hold down the D button in alarm mode.
To turn the selected alarm on or off, use the D button to select the desired alarm, and press the A button.
The alarm indicator appears on the screen

To turn on the hourly notification, in alarm mode, press the D button to select the desired option.
Press button A to turn on/off the hourly alarm.

Sequence of actions to activate the flickering alarm function.This function is not available in all Casio models, so we will describe the process using an exampleG-Shock GBA-400

In the current time mode, hold down the A button for 2 seconds.
The SET HOLD indicator will appear on the screen and the current time will flash.

Press the C button several times until you see the FLASH indicator. If the BEEP indicator is flashing, turn the crown.

Press button A to exit setting mode.

At the very beginning of the article, we mentioned a model with a vibration alarm - GD-350.

You can test the vibration operation by pressing the B button in the current time mode.

To select vibrate as the alert method, in timekeeping mode, hold down the A button for 2 seconds until the setting screen appears.

I like to understand all the intricacies of Japanese watches. I actively support the idea “real shockproof G-Shocks should be digital”, but I don’t give up on ana-digi. News, reviews, lookbooks - I contribute to the popularization of Casio watch products in the Russian-speaking segment of the Internet.

The overwhelming majority of modern watch models are produced abroad. To get a quality product, people order devices from the most famous companies. Electronic wristwatches have enormous functionality, but rarely all this functionality is localized, which leads to setup difficulties. The language barrier leads to a dead end, since not every user has knowledge of the English language. How to set up an electronic clock yourself? It's not as complicated as you might think. Now you will see this.

Settings

Most often, models are equipped with MOD and SET keys. To set the time on such a watch, you need to do the following:

Hold down the MOD key for a while. The edit field should start blinking. If several interface fields start blinking at once, press the same key once to switch to the desired field.
Use the SET button to set the desired parameters. To change the values, you need to press this button repeatedly.
Use the MOD key again and switch to other fields. Again use another button to change parameter values.
If the desired values have been set, then complete the entire procedure with the last click on MOD.

Everything seems simple, but how to set up an electronic watch with 4 buttons? This procedure looks even simpler.

Important! When you've figured out the settings, it's time to think about your harmonious look with a new accessory. Find out all about:

Four buttons on a gadget

If your gadget is equipped with four buttons, then the entire setup process will look even simpler:

You need to also click on the MOD button. When you make the numbers on the device screen blink, press SET once, and then scroll through one of the other two buttons.
The first key is responsible for increasing the value, and the second is responsible for decreasing it.
If you have set the parameters, press the MOD key again.

There are accessories that have even more keys. What should the user do in this case?

Setting up devices with even more controls

But in this case, there is no objective instruction. It is best to follow the recommendations described in the accompanying documentation. Often additional keys are responsible for calling up an electronic thermometer, calendar, timer or stopwatch.

Important! Such keys simply visualize parameters, but do not configure them in any way.

If you still don’t want to use the standard documentation, you can try making a few presses on the MOD key, scrolling through all the functions. When you find the option you want, place your finger on the SET key and set the data. Typically, almost all electronic devices are configured in this way.

Important! Bookmark useful articles for the future, the information from which will definitely be useful to you in the future:

Now you understand how to set the time on an electronic watch, but how to set an alarm on it?

Set the alarm clock

Absolutely all models of electronic devices are equipped with an alarm function. In order to start it, you need to press “MOD” again until you find the word “alarm” on the display.

Important! The alarm time is set in the same way as setting the time and date, which was described above. The “SET” control element in this field is responsible for turning this function on and off.

In fact, different devices are configured differently, so the surest way to parameterize is to type the model name into any popular search engine. On the Internet you can easily find any localized instructions for setting the time.

You can also use the services of the store where the device was purchased. Just bring the device to a consultant and ask for help.

Important! Setting the time in stores is completely free; you can ask the seller absolutely any questions about your equipment.

Video material

It doesn’t matter what country the manufacturer of your watch is: Chinese watches from Aliexpress and Juma, Casio or Montana, or Russian Vitek, whether they are manual or table and wall-mounted, they are all customizable. Now get started, because they are extremely simple and in a matter of minutes you can set the necessary settings on your accessory.

Electronic desk clock alarm clock with temperature measurement function

LCT047

GETTING STARTED

1. Open the battery compartment.

2. Insert 3 new AAA batteries according to the correct polarity.

3. Close the battery compartment.

4. Once the batteries are inserted, the LCD display will light up. The default time is 02:00.

Attention:

If the display does not light up, try changing the batteries or pressing the button RESET.

CLOCK SETTING BUTTONS

SNOOZE / LIGHT– press this button to turn off the ringing alarm. In any mode, press this button to turn on the clock backlight for 5 seconds.

MODE– press this button to switch from normal mode to alarm mode and back.

ALM ON/ OFF– In normal/alarm mode, press this button to turn on/off the alarm/alarm snooze mode.

ADJ- In normal mode, press this button to move to date/month/year. In setting mode, press this button to change the setting value.

°С/°F– press this button to select the temperature display format.

RESET– Click this button to reset all settings. If there are errors in the clock operation, you need to reset all settings and reset the clock.

CHARACTERISTICS

1. Alarm snooze/backlight button ( SNOOZE / LIGHT)

2. LCD display

3. Mode switch button ( MODE)

4. Alarm on/off button ( ALM ON/ OFF)

5. Set button ( ADJ)

6. Temperature mode format selection button °С/°F

7. Button RESET(reset)

8. Battery compartment cover

9. Stand

Arrangement of symbols on the display

Normal mode

4. Day of the week

5. Temperature

Alarm mode

1. Alarm time

2. Alarm icon

3. Alarm mode

4. Alarm snooze icon

SETTING THE TIME AND CALENDAR

1. In normal mode, press and hold the button for 3 seconds ALM ON/ OFF

2. Press the button ADJ

3. Repeat the above operation to set HOURS - MINUTES - SECONDS - 12/24 MODE - YEAR - MONTH - DATE.

SETTING THE ALARM

1. In normal mode, press the button ALM ON/ OFF once to turn on the alarm, the icon will light up « "; twice – the alarm repeat mode will turn on ( SNOOZE), the “ Zz"; three times – both the alarm clock and the snooze mode will turn on.

2. In normal mode, press the button MODE to set the alarm time.

3. Press and hold the button for 3 seconds MODE. The hour number will begin to flash.

4. Press the button ADJ to set the correct value.

5. Repeat the above operation to set the minutes.

Attention:

1. After turning on the snooze function, the alarm will ring 5 times within 60 seconds with a 5-minute break.

2. Press the button SNOOZE / LIGHT to stop the alarm from ringing and switch to snooze mode. Press the button if you want to not only stop the alarm from ringing, but also turn it off completely.

REPLACING BATTERIES

When the symbols on the display become dim, you need to replace the batteries – 3 pcs. type AAA.

ATTENTION!

Please dispose of used batteries in an environmentally friendly manner.

A unique feature of the WR-30M wristwatch is its versatility and the variety of functions performed by this watch:
1. Ultrasonic mosquito repeller;
2. Powered by batteries and solar panels;
3. Waterproof (up to 30m);
4. Digital stopwatch (6-digit display);
5. Backlight for 3 seconds;
6. Alarm clock and hourly signal;
7. Calendar;
8. Battery life – more than 1 year, 500 hours in mosquito repeller mode;
9. Adjustable strap.

WR-30M Controls
1 – MODE button
2 – SET button
3 – Mosquito repeller on/off button
4 – ADJUSTMENT/LIGHT button
5 – LCD display

Time setting WR-30M
Press button 1 (MODE) 3 times to enter time setting mode. The seconds indicator will start flashing;
Press button 4 (LIGHT/ADJUST), the seconds indicator will be reset to zero;
Press button 2 (SET), the minute indicator will flash;
Using button 4 (LIGHT/ADJUST), set the minutes;
Press button 2 (SET) again, the clock indicator will start flashing;
Using button 4 (LIGHT/ADJUST), set the hour;
Set the date, month, day of the week in the same way.

Alarm
Setting the alarm:
Press button 1 (MODE) 2 times to enter alarm time setting mode. The hour indicator will start flashing.
Use button 4 (LIGHT/ADJUST) to set the hour;
Press button 2 (SET) again, the minute indicator will start flashing;
Use button 4 (LIGHT/ADJUST) to set the minutes.
To turn on the alarm, while in CLOCK mode, simultaneously press buttons 2 and 4 (SET and LIGHT) - the “ALM” indicator will appear on the display.
If you press button 4 (LIGHT) during the alarm, the alarm will turn off, but the alarm will repeat after 5 minutes. If you press button 2 (SET), the signal will not repeat.

Hourly signal
To turn the hourly signal on/off:
While in CLOCK mode, press and hold button 2 (SET);
While holding down the SET button, press the 1 (MODE) button;
The hourly signal is turned on - segments of all days of the week are colored red.
The hourly signal is turned off - the weekday segments are transparent.