How to install a protective glass on your phone yourself. How to glue protective glass on a phone correctly? Step by step instructions

The touch screen is one of the most important parts of a modern smartphone. It is also one of the most vulnerable parts of a mobile device. To protect against scratches and other damage, you can glue glass to your phone. Earlier in the article, the features of using this accessory were discussed, and cases were also cited when the protection works as efficiently as possible. Now the material will tell you how to glass a phone at home.

Unlike film, glass can protect not only from scratches, but also more serious damage (cracks, chips). But to achieve maximum efficiency, you need to take into account the features of gluing glass to touch screens. How to stick protective glass on your phone correctly - read below.

Before you stick the protective glass on your phone, you need to do some preparation. For all manipulations you will need the following tools and means:

• A napkin that does not leave streaks.
• Medical alcohol, glass cleaner or alcohol-containing liquid (vodka, cologne, perfume).
• Thin medical gloves.
• Silicone suction cup (possible without it).

Some of these items (such as a lint-free wipe, alcohol capsule, or alcohol wipe) may come with the glass. If you don’t have them, you can buy a napkin in the hardware department of the store, and alcohol in the same place as gloves, at the pharmacy.

If you do not have gloves, you should wash your hands thoroughly with soap. It is recommended to use laundry or regular toilet soap (not liquid), as they best degrease the surface of the skin. After washing, the skin of your palms can become dry; if you want to avoid this, you can’t do without gloves. Poorly washed hands can leave greasy marks on the surface of the glass.

Gluing of protective glass should be done in a clean and well-lit room, without dust in the air. You can do this in the bathroom, where moisture “binds” dust particles, preventing them from flying freely.

How to stick glass on your phone without bubbles

Gluing glass is in many ways easier than protective film. Thanks to its rigidity, it is less susceptible to the formation of bubbles, and it is easier to position it correctly in relation to all buttons, frames and holes. However, before you stick the protective glass on your phone, you need to remember: it does not like to forgive mistakes.

If a speck of dust gets in and a bubble appears under the film, just peel off its edge and blow out the foreign particles or remove them with tweezers. You can do this several times in a row until the bubbles are completely eliminated. With glass, this option is not always feasible, since it is difficult to peel it off, sometimes it may not be possible to lift one edge, and if you peel it off and paste it several times, the sticky layer may become unusable, and the glass itself may burst.

The film gluing procedure consists of 6 stages:

1. Before sticking the protective glass on the phone, the screen needs to be degreased. For this purpose, an alcohol-containing liquid is used. Before working, you should wear medical gloves to avoid accidentally contaminating the screen and glass. Using a cloth soaked in alcohol, you need to thoroughly wipe the screen, leaving no streaks or stains.
2. The new glass should be grasped by the edges with two fingers. Do not touch the adhesive layer with your fingers (even with gloves), as this may affect its adhesive properties, impairing the reliability of adhesion. If there is a suction cup, you can grab the glass with it, then the risk of getting fingerprints is reduced to zero.
3. You need to remove the protective film from the bottom side, holding the glass at a distance of 5-10 cm from the screen. If you take a greater distance, dust particles may stick to the glass during movement.
4. Having aimed, you should slowly bring the glass to the screen. After it begins to set, you need to run a napkin over it in the middle of the screen (from the earpiece to the buttons.
5. When the center of the protective glass is stuck to the display, you need to squeeze out the air from under it, moving the napkin from the center line to the edges.
6. When the glass is completely stuck, you can remove the transport film covering the top of the glass and feel free to use your smartphone.

Not everyone can do everything “without a hitch” the first time. Sometimes it is not possible to remove all the dust, or a small speck gets in during the gluing process. It can be removed, but it should be done very carefully. After all, if there is a large bend, the glass will burst. Yes, and prying off the edge of the glass is more difficult than when gluing the film.

If trouble does happen, and the dust under the glass prevents it from sticking properly, you need to peel off the edge from the corner closest to the bubble. This can be done with a thin strip of plastic, for example, a bank or discount card. When you pry the edge, you don't need to lift it much. It is enough to leave a gap of a couple of millimeters. You can remove a speck of dust with clean tweezers or blow it out. A can of compressed air, a regular vacuum cleaner or a low-power compressor will do for this.

After the obstacle is eliminated, you can return the edge of the glass to its place. It should be smoothed with the same movements: from the center to the edges.

How to stick glass on a phone with a 2.5D screen

As mentioned in the previous article, for screens with a 2.5D glass sensor, there is little point in using protective glass. It can prevent scratches, but it can withstand impacts only mediocrely, and it doesn’t protect against falls at all. But if the “native” oleophobic coating is of poor quality or has worn off, the glass can restore its sliding properties, making the use of the touchscreen more convenient.

The procedure for gluing tempered glass onto a 2.5D screen is the same as for conventional sensors (with flat edges). More attention should be paid when purchasing an accessory. The dimensions of the protective glass should be smaller than the dimensions of the front panel of the smartphone. Otherwise, it will block the sanded edges, leaving an air gap at the edges. Such a sight spoils the appearance of the smartphone and worsens the protection.

When gluing protective glass onto a 2.5D screen, you need to pay more attention to aiming and centering the accessory. It is important not only that the holes for speakers, buttons, cameras, etc. match, but also that the edges of the glass do not overlap areas of the screen with sanded edges (see the previous paragraph). Otherwise, all rules and precautions remain in force.

Modern smartphones and phones are expensive. But you also want to save an inexpensive purchase for many years. To prevent equipment from deteriorating, protective glass is glued to the screen. This will protect your device from scratches and dirt. How to stick protective glass on your phone? This procedure is not complicated, the main thing is to do everything carefully.

Why is glass required?

When using a smartphone for a long time, chips, cracks and scratches appear on it. Moreover, this applies not only to the side parts, but also to the top, bottom ends, back and front panels. And there is almost the main element - the screen. Many people doubt whether it is worth sticking a protective glass on the phone. If you want to save your device, then this is a must.

Protective glasses are designed to preserve your phone's display. You can also use film, but it has a low level of reliability. Therefore, you need to know how to properly stick a protective glass on your phone.

What is it?

Glass looks like film. And the functions of the products are similar. But glass is considered the most reliable means, since it has a higher density compared to film. It is transparent and flexible, which is also important. Glass is also more expensive than film. But it will pay off, especially if there is a risk of mechanical damage.

Many users purchase glass if the device costs more than 10-15 thousand rubles. But it is suitable for different technologies. By purchasing such an item, the phone owner reduces the risk of damage to zero.

Advantages

Before you find out, you should familiarize yourself with the benefits of the product. It is resistant to scratches and other similar damage. Some may not believe it, but just test it to be sure. Simple keys will do. A sharp edge can be drawn across the glass without damaging it.

Another advantage is shock absorption. Many smartphones break when dropped. Safety glass eliminates this problem. It holds up tightly, especially when compared to film.

How to stick protective glass on your phone? This procedure is very simple, because it does not require special experience.

Features of the procedure

If the phone has already been used, then it needs to be prepared for use. Old accessories must be removed. How to re-stick the protective glass on your phone? You need to remove the cover and hook the protective layer onto the edge. To prevent greasy stains from appearing, you must first wash your hands and dry them. This is an important preparatory part for work. Only then is new glass glued on.

The procedure will require a horizontal surface and high-quality lighting. This could be, for example, a table. A suitable work area is essential to protect against streaks and dust. The result will be flawless if you pre-treat the screen.

Need for cleaning

When the film or glass is removed from the phone, the screen should be treated with a cotton swab or napkin soaked in alcohol. The procedure must be performed carefully to avoid contamination.

Then the device is wiped with a cloth that was included in the kit. But another one will do. Now you can put glass on your phone.

Important stage

There is a special film on the adhesive part. It should be eliminated. Then the glass is applied to the screen. It should be aligned to the edges. It should also be combined with the speaker and other elements. Please note that the protective glass is held by the edges. Only then there will be no traces after the procedure.

After adjustment, the part is lowered onto the screen. Gluing occurs independently. This completes the procedure. This method can be used for different devices.

Flaws

Like other elements, glass also has disadvantages. Many phone users believe that the main disadvantage is the complexity of the integration procedure. But in reality this is not the case.

The main disadvantage is that after this the device becomes bulky and heavy. But if this is not important, then you can safely purchase this essential element for your phone. Telephone stores offer a wide range of protective glasses. And for an additional fee they will even glue glass.

Some subtleties

Most phone owners are afraid of bubbles. Because of this, the technique does not look very neat. How to stick a protective glass on your phone so that there are no bubbles?

A dry cloth will help remove them. This process is very simple. Bubbles only need to be squeezed out from the center of the device. Doing it yourself will save you money, since salons charge money for it.

Price

Glasses are a common accessory, so many companies create them. Chinese products are considered cheaper, but they are also suitable for protecting the device. How much does it cost to put a protective glass on your phone? This service costs between 500-1000 rubles.

Products from all manufacturers differ in the level of hardening. Chinese products also protect against scratches. You can purchase glass for a price ranging from 300-1000 rubles. Although you will have to spend money on the purchase, it will preserve the appearance of the device.

Manufacturers

Gorilla Glass is a glass invented in 1960, but with the release of smartphones it began to be used in 2000. The American company produces reliable protective equipment for devices. Each subsequent product surpasses the previous one in all criteria. For example, the second version had better optical properties compared to the first.

Dragontail is also a leading company. The product has all the necessary properties to protect the device from scratches. There is high-quality Sapphire glass. The product does not damage the camera lens, as well as the entire screen. Sapphire is durable, but it is considered synthetic and is produced by crystallizing aluminum oxide at elevated temperatures.

Screen protectors are considered the best accessories for a phone, especially a smartphone. They work better than films, preserving equipment for a long time. And which product to choose depends on your desire.

Many people may drop their phone during use and carry it in their bag, where, in addition to the phone, there are also sharp objects - for example, keys.

Therefore, it is not surprising that after several months of use, scratches appear on the surface, and in some cases, chips and cracks.

However, using modern technologies, it is possible to extend the life of the device. An excellent solution is to purchase and glue protective glass.

Visually, it strongly resembles a film designed to solve similar problems.

But such glass is completely transparent and flexible, and due to its increased density it is considered more durable and reliable.

The cost of a protective screen for a phone is an order of magnitude higher compared to film, but the additional money spent is well worth the stated price.

If it is present, the likelihood of the screen suffering from damage is reduced to virtually zero.

Why do you need protective glass?

Read also:Without moisture and dust: TOP-20 protected smartphones ip68

Before you stick a protective glass on your smartphone, let's first get acquainted with its main features.

The main advantages are as follows:

• increased resistance to scratches and damage. Checking this is quite simple - you can easily rub the surface with scissors or a knife. The face covering will not receive any marks;
• absorption of impact energy. Even if the phone falls with the display down, its front part will not be damaged. Only cracks in the protective glass will remain on the surface. The structure of the material from which it is made prevents the appearance of fragments;
• reliable fixation. Compared to gluing film, safety glass is easy to glue at home, even if the owner does not have the relevant experience. A special adhesive composition guarantees a strong fixation on the front of the screen. Thus, getting rid of the protective glass will not be easy, which cannot be said about ordinary film, which can be torn off even with a smartphone case.

The use of protective glass is also characterized by a number of disadvantages:

• the device will become heavy and bulky;
• the cost of protective glass is an order of magnitude higher compared to film;
• Extreme care is required during the installation process.

The average display thickness varies from 0.2 to 0.3 mm. The product has 5 base layers:

• oleophobic coating . It is responsible for the comfortable sliding of the user’s fingers across the display, and if fingerprints appear, they can be wiped off with a regular cloth. In addition, the task of the oleophobic coating is to provide comprehensive protection against moisture penetration;
• protective coating . Its purpose is to maintain the integrity of the screen and prevent cracks/scratches;
• anti-reflective coating . Another important layer that prevents dull marks from appearing on the display when using the phone in the sun;
• containment layer . If a situation arises where the user is still able to break the display, the containment layer will prevent the appearance of fragments;
• silicone layer . Fixed on the display surface.

How to glue glass on iPhone

Read also:TOP 11 Best Chinese smartphones | Current rating 2019

If you want to familiarize yourself with the correct sequence of actions when gluing protective glass on the iPhone 6 and 7 series, you need to remember that for almost all devices the algorithm of work is the same.

Depending on the name of the glass manufacturer, the contents in the box may vary significantly. As a rule, the kit contains not only glass, but also a microfiber cloth.

In some cases, an alcohol wipe is also present. If, for example, certain materials are not available, you can use alternative means at hand.

So how to properly stick protective glass on a smartphone? The instructions are as follows.

1 If your phone already has old film or glass, you first need to get rid of the coating.

To do this, first remove the cover and then pick up the cover by the edge.

Before performing the procedure, be sure to clean your hands so that you do not leave greasy fingerprints on the surface of the glass during the work process.

If you install them and stick the protective glass on your smartphone, you will see marks every time you use the phone.

2 Prepare your work area in advance.

It can be any flat surface - a table, stool, etc.

To prevent dust and streaks from appearing during the process of gluing the protective surface, we strongly recommend turning on bright light in the room.

3 The next step is preparing the screen. Using cotton pads or an alcohol wipe, thoroughly wipe the surface of the display.

After that, take a microfiber cloth and wipe the screen so that no traces of alcohol, dirt, stains, etc. remain on its surface.

Checking for defects is very simple - just bring the phone screen closer to the light source and check the cleanliness of the coating.

If for one reason or another you cannot completely get rid of dust particles, you should try to collect them using ordinary tape.

Place the sticky side of it on the screen and pull sharply.

Please note that this must be done quickly, since slowly peeling off the tape may leave traces of glue on the surface of the display.

Once the tape is removed, wipe the display again with a dry cloth.

4 Each piece of protective glass includes two films.

First, get rid of the bottom film from the adhesive side.

Offer a protective cover for your display.

Please note that you can only hold it by the edges. Otherwise, marks will remain on the surface.

Align and carefully glue the glass along all edges. Be sure to fit it to the speaker and home button.

Then slowly release the glass - it will begin to stick to the display on its own.

Practice shows that not every person can perfectly glue a new protective glass the first time, since air bubbles may remain under it.

In this case, you can get rid of them with a dry cloth. Just press it on the display towards the edges.

After this, all the air goes outside.

If there is dust under the glass, you need to bend it on the required side and get rid of the dust with tape. Then press the protective glass back onto your smartphone's display.

Now, having read the correct instructions for gluing protective glass on the iPhone 5, 6 and 7 series, you will have the opportunity to further save on service center services and provide comprehensive screen protection yourself.

We suggest watching video instructions from specialists who talk in detail about how to perform all the steps correctly.

How to stick a protective glass on an iPhone screen

How to properly stick protective glass on a smartphone at home? Instructions for regular and 3D glass

Gluing glass with 3D rounding

Read also:TOP 10 Best budget smartphones with optimal price-quality ratio up to 15,000 rubles. | Review of current models in 2019

If you recently purchased a new iPhone, we strongly recommend that you protect it from screen damage, including chips, scratches, and so on.

This is quite easy to do. We bring to your attention an overview of special protective glass with 3D curves.

These products are designed to provide comprehensive protection to the screen surface from damage resulting from severe impact or contact with sharp objects.

The average layer thickness is only 0.23 millimeters, but thanks to the use of a polymer structure, the smartphone can easily cope with strong impacts.

During production, materials are used that are capable of creating a special barrier that quickly cracks, absorbing impact energy, but at the same time guaranteeing high-quality protection for the screen as a whole.

Compared to conventional glass, 3D curved products offer the following advantages:

• Presence of soft edges. Manufacturers use special PET materials to make the edges of the protective surface. This allows you to achieve high-quality and reliable fixation, and the edges will not crumble or crack. This is not only a convenient, but also a safe solution, since the soft edges will not scratch the owner’s hand when, for example, he takes the phone out of his pocket;
• 3D wrap effect. If, in the case of ordinary glass, only the straight part of the display is covered, gluing glass with 3D curves guarantees comprehensive protection of the entire display of the device. Thus, the extreme curved surfaces will be reliably protected;
• Increased level of hardness. Despite the small thickness, the production material has a hardness of 9H. Today, this is one of the few models that fully corresponds to this indicator;
• Minimum thickness. Using ordinary Chinese glass makes the phone more difficult to use. Branded products always have a thickness of just under a quarter of a millimeter, but this is quite enough for the device to receive high-quality and durable protection over a long period of time.

Protective glass is several times harder than the most durable film, and therefore saves the device not only from... As the manufacturers say, it can even withstand a blow from a hammer. We do not recommend conducting such experiments. But we can say: if you fall, it is the protective glass that will most likely break, and not the screen of the device.

In this case, the glass does not affect the sensitivity of the sensor and the brightness of the image.

Iphones.ru

However, glass is more expensive than film. And you can select it only for relatively popular models of smartphones and tablets.

How to stick protective glass

Step 1. Prepare the room

If dust gets under the protective glass, you will have to live with bubbles on the gadget's screen or struggle to remove them. To avoid this, wet clean the room or at least:

1. Ventilate the room.
2. Using a clean cloth, preferably with detergent, wipe the table on which you are going to glue the protective glass.
3. Wash your hands.

Step 2: Prepare your tools

In addition to the device and protective glass, you will need:

1. Display cleaning liquid, antistatic agent or regular alcohol.
2. Microfiber cloth.
3. Stationery tape.
4. Scissors.
5. Plastic card or scraper.

Step 3: Degrease the screen surface

To do this, use display cleaning fluid, antistatic agent or alcohol. Carefully remove all stains. If you just removed the old one from your phone, wipe off any remaining adhesive. Then wipe the screen dry with microfiber.

Step 4. Glue the glass

Take the protective glass in your hands. On one side it is covered with a film that needs to be removed. Now the glass must be held at the edges so as not to leave fingerprints on the surface.

Carefully, without touching the screen, place the glass 5–10 mm from the smartphone. Align the glass so that the speakers and buttons are under the corresponding holes.

The most exciting moment has arrived. When the glass is perfectly aligned with the edges, simply lower it onto the screen. Thanks to the adhesive inner coating, it will stick on its own.

If any bubbles appear, remove them with a microfiber cloth. Wipe the screen with it from the center to the edges, expelling excess air.

Step 5: Remove missed dust particles

Perhaps some speck of dust got under the glass and left an additional bubble on the screen. Unfortunately, microfiber cannot be removed. You will have to re-raise the protective covering.

This can be done using a plastic card or a scraper. In addition, we will need a strip of stationery tape. It is better to take transparent adhesive tape: white construction tape or colored varieties will leave marks on.

Grasp the edge of the glass, lift it enough so that you can get a speck of dust. Now stick a piece of tape on it and sharply tear it off along with the debris. All. All that remains is to return the protective glass to its place.

To protect your gadget from damage as much as possible, you need to know how to apply protective glass. You can do this yourself, since there is nothing complicated in this process.

Required materials and tools

Externally, the protective glass on a smartphone or telephone resembles an ordinary film made of polymer material. Externally, it is thin and flexible, but specially hardened to withstand impacts and scratches. There are no traces of damage from a knife, scissors, or keys.

Even if the blow is so strong that the glass is damaged, it will not shatter into small and dangerous fragments, but will remain in a broken but unified state.

It is clear that such protection is thicker than a film, since it consists of five components: an oleophobic coating, a protective, anti-reflective and containment layer, as well as a silicone substrate. This allows you to protect the screen from scratches and prevents the formation of streaks. The gadget becomes bulkier and heavier, which does not affect the operation of the sensor at all.

Required tools:

• Actually the glass itself.
• A special spatula for smoothing or a regular plastic card.
• Cleaning cloth. You can replace it with a cotton pad soaked in alcohol.
• Microfiber cloth.

Sometimes scissors and tape may be required. As a rule, the purchased kit contains all the necessary materials to glue the glass yourself without any problems.

Step-by-step instructions on how to stick protective glass

The main thing is to choose the right protection for the display of a particular gadget. Each protective screen is not universal, as it is produced for a specific model. Of course, you can simply contact specialists, buy suitable glass from them and ask them to glue it (for an additional fee, of course). But there is an option to do it all yourself.

To phone

It is not difficult to apply a protective glass to your phone. The main thing is that it lies flat and completely coincides with the borders of the screen.

How to do it:

1. Clean the room, wash your hands. The room should be light enough to see even the smallest specks of dust settling on the glass.
2. Prepare the necessary tools.
3. Degrease the screen with antistatic agent or alcohol. Then wipe dry.
4. Disinfect your hands, take the glass (only by the edges to avoid fingerprints), remove the film.
5. Align it and lightly lower it onto the screen. It will be immediately fixed thanks to a special adhesive coating.

If a speck of dust suddenly gets under the glass, don’t worry. You need to carefully lift it and remove the dust with a piece of tape.

On a smartphone

Sequence of actions:

1. Wash your hands to avoid accidentally getting dirt on the screen.
2. Remove the cover. Remove old coating, if any.
3. Place the gadget on the table and wipe the screen with a special napkin.
4. Remove the protective film from the glass and apply it to the screen, holding it on both sides. In this case, the edges of the protection must match exactly, and the cutouts must align with the speaker or buttons.
5. Gently lower it onto the screen and secure it with light movements by sliding your finger from top to bottom in the center.

If dust suddenly gets under the protection during work, it must be removed with tape or a dust collector, and the whole process must be repeated from the beginning.

To tablet

In the case of a tablet, the procedure is almost the same. You just need to be more careful, since the device is large, so it is difficult to accurately calculate the ideal glass installation.

There are the following tricks for this:

1. Place the device on a clean surface. They say that it is best to do this in the kitchen or bathroom, since there, due to the high moisture content in the air, there is little dust that can settle on the already prepared and cleaned screen.
2. Place the protective glass side with the protective film on the screen.
3. Check that all holes match.
4. Take a piece of tape and glue one part of it to the glass (in the center), and the second to the back panel.
5. Again, make sure that the glass fits evenly. Correct if necessary.
6. Apply tape on the right and left sides. Roughly speaking, it should look like a book with a front cover in the form of glass, and a back cover in the form of a tablet.
7. After all the preparations, clean the screen, remove the protective film from the backing and glue the glass. Scotch tape will help you do this without much difficulty, since everything is already calculated in advance.