How to install an ios beta testing profile. How to roll back to the official OS if you are not satisfied with the test version of iOS

On June 5, the first beta version of iOS 11 for developers was released. The first public version for all testers will be released later this month. Final version expected in September! But now anyone can install iOS 11 beta 1 on the following devices:

The list includes all iPhones/iPads/iPods that supported iOS 10. Not a single device was unplugged this year. Hooray!

Attention! Any beta version (and especially the first) is installed at your own peril and risk. Various types of bugs are not excluded (and even obligatory). On the beta version, your battery may hold less charge and disappear Wi-Fi signal etc. But all this may not happen. Therefore, if you do not want to lose data, then simply make a backup copy before the update operation. Rolling back from iOS 11 to iOS 10.3.2 is possible according to these instructions: iPad firmware.

How to update your device to iOS 11 beta?

Step 1. Download the beta tester profile. More precisely, we are trying to download. We definitely do this in Safari on iOS.

Step 2. After installing the iPhone, iPod, iPad will ask you to restart itself. We agree - reboot the device.

Step 3. Let's go to Settings->General->Software Update. We see that an update to iOS 11 beta has appeared.

Requirements: 2+ gigabytes free space(I suspect all 4!). Wi-Fi enabled. 50% charge (or need to be charged).

Download iOS 11 beta. After this we start the installation.

Good luck to everyone, and I’ll say it again. Such an operation is performed only at your own peril and risk!

The riskiest ones can share their first impressions! :)

For registered developers. There are two ways to install iOS 11 on iPhone and iPad. If the update cannot be delivered over the air, you can flash the device via iTunes.

It is important to remember that test builds of iOS 11 contain not only new features, but also bugs that may prevent normal operation. iPhone work and iPad. For non-software developers, installing the developer beta is not recommended. Public version expected before the end of the month.

Create a backup copy

Before installing iOS 11 on iPhone and iPad, you must create backups. It won't let you lose important files, if something goes wrong.

Step 1: Connect your iPhone or iPad to your computer.

Step 2: Open iTunes on your computer.

Step 3. Click on the device icon in the upper left corner of the window.

Step 4: Go to the Review section in the sidebar.

Step 5: Check "This PC".

Step 6. Check the “Encrypt backup” option.

Step 7: Click “Create a copy now.”

Step 8: Enter a password to encrypt the backup.

Step 9: Once the process is complete, select iTunes > Preferences at the top.

Step 10: Select the Devices tab.

Step 11. Right-click on the created backup.

Step 12: Click "Archive".

If a backup is archived, it will not be overwritten by the backup a copy of iOS 11.

How to install iOS 11 beta: method 1

Step 1: On your smartphone or tablet, open this page.

The Apple Beta Software Program lets users try out pre-release software. The feedback you provide on quality and usability helps us identify issues, fix them, and make Apple software even better. Please note that since the public beta software has not yet been commercially released by Apple, it may contain errors or inaccuracies and may not function as well as commercially released software. Be sure to back up your iOS device with iTunes and your Mac using Time Machine before installing beta software. Since Apple TV purchases and data are stored in the cloud, there’s no need to back up your Apple TV. Install the beta software only on non-production devices that are not business critical. We strongly recommend installing on a secondary system or device, or on a secondary partition on your Mac.

How do I get the public betas?

As a member of the Apple Beta Software Program, you"ll be able to enroll your iOS device, Mac, or Apple TV to access the latest public betas, as well as subsequent updates, directly from iOS Software Update, the Mac App Store or tvOS Software Update.

How do I provide my feedback to Apple?

The iOS and macOS public betas come with the built-in Feedback Assistant app, which can be opened from the Home screen on your iOS device or from the Dock on your Mac. The Feedback Assistant app is also available from the help menu of any app by selecting Send Feedback. If you're running the tvOS public beta, you can submit feedback through the Feedback Assistant app on an enrolled iOS device. When you experience an issue or something does not work as expected, send your feedback directly to Apple with Feedback Assistant.

Who can participate?

The Apple Beta Software Program is open to anyone with a valid Apple ID who accepts the Apple Beta Software Program Agreement during the sign-up process. If you have an iCloud account, that is an Apple ID and we recommend you use that. If you do not have an iCloud account or any other Apple ID, you can create one now.

Do I have to pay a fee to join the program or pay for software?

No. Both the program and software are free.

Is the public beta software confidential?

Yes, the public beta software is Apple confidential information. Don't install the public beta software on any systems you don"t directly control or that you share with others. Don't blog, post screen shots, tweet, or publicly post information about the public beta software, and don"t discuss the public beta software with or demonstrate it to others who are not in the Apple Beta Software Program. If Apple has publicly disclosed technical information about the public beta software, it is no longer considered confidential.

How does the Apple Beta Software Program contact me?

The Apple Beta Software Program uses the contact information associated with your Apple ID. You may keep your contact information up to date by visiting

In anticipation of the release of the long-awaited update, it's time to prepare your iPhone, iPad and iPod touch to switch to a new OS. Unless, of course, you plan to update your device. In this article we will tell you how to check a smartphone or tablet for compatibility with iOS 10, “clean” the device, make backup and perform other necessary procedures.

1. Check compatibility

iOS 10 is designed for models with processors latest generation. Attempts to make the operating system compatible with older versions of the iPhone and iPad would inevitably cause problems. As a result, it would be necessary to create a separate version of the OS for them, effectively served by outdated hardware.

List of supported iOS 10 devices along with the release of the first beta in June. “Ten” will be able to be installed by all owners of gadgets on which iOS 9 is currently deployed, with the exception of iPhone 4s, iPad mini, iPad 2, iPad 3 and iPod touch 5G.

List of devices supported by iOS 10:

iPhone SE
iPhone 6s Plus
iPhone 6s
iPhone 6 Plus
iPhone 6
iPhone 5s
iPhone 5c
iPhone 5

iPad Pro 12.9
iPad Pro 9.7
iPad Air 2
iPad Air
iPad mini 4
iPad mini 3
iPad mini 2
iPad 4

iPod touch 6G

On the list compatible devices There are no outdated models. As Apple said, owners of smartphones and tablets released in 2011 and 2012, respectively, will not be able to count on updating to iOS 10. At the same time, some of the operating system’s capabilities will not be available on smartphones and Apple tablets previous generations. But overall they will remain part of the updated ecosystem.

2. Have you installed the beta version of iOS 10? Update to iOS 10 GM or downgrade to iOS 9.3.5

Some iPhone users and iPad have already updated their devices to beta iOS versions 10, however, not everyone knows that any test firmware has an expiration date, after which the device will turn into a “brick”. As a result, you will have to upgrade to official version, or roll back the device to iOS 9. So don’t wait until the last minute and update right now to iOS 10 GM, or downgrade.

It is worth understanding that you will not be able to install the GM assembly “over the air”. Formally, this firmware is intended for developers and is installed on the gadget via iTunes. The public version of iOS 10 will be available for installation directly from a mobile device.

3. Clean your device

Before installing iOS 10, it makes sense to part with unused games and applications. This measure is not mandatory, but it never hurts to get rid of unnecessary software before installing a major update. By deleting software from your device, you do not lose anything - you can restore any application from the App Store.

In general, preparing for an update is a great opportunity to tidy up your device. ABOUT unnecessary applications was said above, but you can also delete temporary files, cache, web surfing history, cookies, logs and other garbage. You can find out more about this in the articles:

Using the proposed software, you can free up from 500 MB to 5 GB on your iPhone and iPad in a couple of minutes.

4. Install updates from the App Store

On devices with a large number of third party applications it is recommended to install latest updates from the App Store. During the testing phase of iOS 10, many developers released new versions of the software. Having installed current versions Software, you can be sure that applications are compatible with iOS 10. You can download updates in the App Store -> Update section.

5. Check available space

The iOS 10 file weighs about 2 GB, with a minimum of 2.5 GB required on the device free memory to install the OS. This does not mean that ten takes more space – extra space necessary to unpack files and complete the update process. Find out the volume available memory on iPhone and iPad, you can go to the General menu -> About this device.

By the way, iOS 10 weighs much less previous versions. For example, a 128 GB iPhone with installed iOS 9 offers users only 113 GB of free memory, after iOS installations 10 this figure will increase to 122 GB. On a 16 GB iPhone with iOS 9, 11.9 GB is available, and after installing iOS 10 - 12.85 GB.

6. Back up your data

Many users use an iOS device as their main gadget for taking photos and videos. And hardly anyone wants to lose important points of his life, captured on digital images, unsuccessfully updating the firmware. To keep your photos or videos safe, it is recommended that you make a backup copy. This can be done through iTunes and iCloud. This will increase your chances of successfully recovering information in the event of loss.

iTunes: connect mobile device to your computer, launch iTunes, select it in top panel and click Create Backup.

iCloud: On iPhone and iPad, go to Settings -> iCloud -> Backup -> iCloud Backup.

Always create backups before updating the software on your devices. This applies to all major updates such as iOS 10.

7. Jailbreak?

MacDigger follows jailbreak trends in Apple world, so our first responsibility is to warn users of jailbroken iPhones and iPads that they are not available. at the moment exploits for jailbreaking iOS 10. When upgrading to a new OS, you will lose your current jailbreak. However, it is not possible to return to iOS 9.3.3.

Rumor has it that the hackers are from Pangu. However, this information should still be classified as rumors. Worth the wait official statements, and then update your iPhone and iPad to the new OS. Most best option for now - stay on iOS 9.3.3 until it becomes clear whether a jailbreak for iOS 10 will be released or not. Everything should be resolved within a few days after the update is released.

8. Wait for the release

After completing the above steps, you will only have to wait until September 13th and install the OS. To install iOS 10 on iPhone, iPad and iPod touch, all you need to do is go to the operating system settings and in the General -> Software Update menu, confirm the firmware download.

– the first mobile operating system, for which Apple began releasing public beta versions. Now anyone can personally familiarize themselves with all the new firmware functions and help Apple test it.

Testing the beta version involves downloading and installing it on your iPhone or iPad. This process cannot be called complicated, but it is a little unusual. For users who want to try out the new testing version for themselves iOS beta, we'll tell you how to do it.

1 . Open Safari browser on your iPhone or iPad and click this link (mirror) to download your registered developer profile.

2. In the pop-up window that appears, select Allow.

3. Click iPhone and confirm to install the developer profile on your iPhone or iPad.

4 . Reboot your iOS device.

5. After reboot, open Settings and follow the path Basic → Software update. iOS 12 will be available for download and installation. Your device must have at least 2 GB of free space.

6 . Click the button Download and install" and wait for iOS 12 to install on your iPhone or iPad.

How to register for an iOS 12 Public Beta Program account (begins July 2018)

macOS Beta Program participants must re-enroll for iOS downloads 12 beta is not needed - you can use the same. Users who have not previously participated in the program must register with using Apple ID. To do this you need:

2 . Press the iOS button;

3 . Click the button "Load profile";

4 . In the pop-up window that appears, click on the button "Allow";

5 . Choose iPhone(the request will appear if your iPhone is paired with an Apple Watch)

6 . Click "Install".

8 . Click on the “ Install", confirming the terms of use.

9 . Click Reboot to reboot the device.

How to install the iOS 12 public beta

Once the OS has loaded, a notification will appear indicating that it is ready for installation. For installation you need:

1 . Open application " Settings", choose " Basic", and then click on the item " Software update»;

2 . Choose " Install»;

3 . Enter your lock screen password;

4 . Confirm your agreement to the terms of use by clicking " Accept».

The device will reboot, after which the latest current beta version of iOS will be installed.

How to roll back to the official OS if you are not satisfied with the test version of iOS

If for some reason you don’t like the beta version of iOS, you can roll back to official iOS.