Home-Download software-How to set up a network scanner in Windows 7. TWAIN@Web - Scanning documents over a network

How to set up a network scanner in Windows 7. TWAIN@Web - Scanning documents over a network

A local network provides various advantages for working with data: copying, transferring information, sharing programs and equipment. For example, one device can work with several computers on the network.

You will need

  • - computer;
  • – configured local network;
  • – scanner.

Instructions

1. Download the RemoteScan 5 program to share the scanner over the network in Windows. You can download it here http://www.remote-scan.com/. Install the server version of the program on the computer to which the scanner is connected. Install the client version of the program on other computers on the network. When installing the latest version, the program will display a message saying that the scanner was not detected, do not worry, this is typical. After installing the server version, a program icon will appear in the tray. Right-click on it and go to “Settings” to connect the scanner to the network. Select the scanner and configure the ports. The scanner may not be able to detect it right away; it will take from one to 3 minutes.

2. Open your firewall/antivirus and allow access to port 6077, if you have NOD 32 antivirus, go to your personal firewall, go to interactive mode in the settings and make a separate rule for the RemoteScan program. Later, install client versions on other computers. The installation of the network scanner in Windows is complete.

3. Set up a network scanner in Ubuntu OS. Go to the terminal, enter the command #apt-get install and enter the name of the required package - sane-utils, then open the scanner configuration file, the one that can be located in the /etc/sane.d/ folder with the name saned.conf, add it to the end file the address of the computer to which you want to share the scanner. Edit the file #nano /etc/inetd.conf, add the line sane-port stream tcp nowait saned:saned and specify the further path /usr/sbin/saned saned.

4. Make a Scanner group: #groupadd scanner. Add users to this group using the following command: # #usermod -aG scanner “User name”; usermod -aG scanner saned. Edit the file 40-libsane.rules, located in the nano /lib/udev/rules.d/ folder, and find your scanner there. Bring the line with the name of the scanner approximately to this form: # “Name of the scanner”; ATTRS(idVendor)==”03f0″, ATTRS(idProduct)==”4305″, ENV(libsane_matched)=”yes”, MODE=”664″, “Group name”=”scanner”.

5. Set up the client computer: install the sane-utils package with support for the standard package installer apt-get install, edit the net.conf file located in the nano /etc/sane.d/ folder, add the address of the computer with the scanner to the end of this file. Connecting the scanner over the network is complete.

In contrast to Windows, which is easy to install and configure, Linux has become a symbol of the complexity and complexity of installation, which can scare off anyone who does not consider himself a command line virtuoso and a high-class programmer capable of writing the missing driver for an unknown device on his own.

However, installing and configuring ubuntu - the Linux distribution especially famous among beginners - is no more difficult than any other operating system. This distribution is ready to launch immediately after installation and includes everything you need for work: a client for communication via the ICQ protocol, an email client, a tool for working with photographs, an audio and video player, and the OpenOffice office suite. In addition, a mechanism for tracking software changes is implemented, freeing the user from the need to monitor the release of new versions. Here are schematic instructions for the installation process: 1. Download the distribution from http://ubuntu.ru/get, burn the disk image to CD, install it in the drive and boot. To do this, you may need to set the boot priority from the CD drive in the bios.2. In the installer that starts, select Russian. You can navigate through the list of languages ​​using the arrow keys on the keyboard.3. In the menu that appears, select the “Install ubuntu” option4. You will again need to select the preferred language for communication during the installation process, specify the time zone.5. Select your keyboard layout and check if it works correctly by typing a few words.6. A particularly important installation stage is determining the disk partitions for the operating system. If you want to leave Windows and set up Ubuntu as an alternative operating system, you need to do it very carefully so as not to lose expensive data and preserve the functionality of Windows. As usual, for the root partition containing system files, 5 GB is enough; for the swap partition, a volume equal to the amount of RAM of the computer, or one and a half times greater than it, is usually sufficient. The home directory, containing user data, should ideally be located on a different physical disk and have a volume of 8-10 GB.7. Specify the username and password, as well as the computer name, click “Install”. After rebooting, the system is ready for use.

Video on the topic

A scanner is a device necessary for converting a wide variety of documents into electronic form, from texts and tables to photographs. Scanner models are constantly being improved, their functional probabilities are increasing, and prices are decreasing, so that the scanner is increasingly finding a place on the table next to the home computer.

To take full advantage of modern special scanning technologies, you need to configure your scanner. Fortunately, with the origins of modern USB models and operating systems, setup is often done mechanically, simply by connecting the scanner to the computer. However, in other cases, the user may also need to take primitive steps to configure the scanner. Their approximate sequence could be as follows: 1. First of all, connect your device to your computer. The operating system will try to recognize it and mechanically install the necessary drivers and configure the scanner.2. Open Scanners and Cameras in Control Panel. All imaging devices connected to the computer are listed here, as well as a shortcut to launch the Connect New Devices Wizard. If the connected scanner is already in this folder, it means that the connection was made successfully in mechanical mode. If it is missing, run the scanner installation wizard.3. Manually select the scanner manufacturer, as well as the specific model name, and click Next. If your scanner model is not in the list, then insert the driver disk that came with the device into the drive and click the “Have from disk” button. You will need to specify the path to the device driver on the disk. As usual, the required driver is located in a folder whose name contains the name of your scanner model and the name of the operating system in which you are working. If there is no disk with drivers, try downloading them from the scanner manufacturer's website and specifying the path to the folder in which you will save them.4. At the next step, the wizard will prompt you to specify the port to which the scanner is connected. If you are in doubt about which port to specify, select Mechanical Port Definition.5. All that remains is to set the name of the new device in the system, and the installation is complete. Now it can be used in any program that supports working with images.

A local network has a number of advantages for use within one organization: universal access to files and applications, as well as shared use of equipment: printers, scanners.

You will need

  • – local network;
  • – scanner;
  • - Internet.

Instructions

1. Use the RemoteScan 5 application to share the scanner over the network. Download this program from the link http://www.cwer.ru/node/6585/. Next, install it on your computers. Accordingly, on the computer to which the scanner is connected, the server version, on the remaining PCs to which the scanner needs to be connected via the network, the client version.

2. Please note that when installing the client version of the program, a message about the absence of a scanner may appear, do not pay attention to it. After completing the installation of the server part of the application, right-click on the program icon in the tray. To access the settings.

3. Select a scanner, configure ports to access it. Please note that it may take from one to 3 minutes to identify the device. If this does not happen, then your scanner model is not supported by the application.

4. Wait until the strikethrough icon disappears from the icon. Open your antivirus/firewall program. Allow access to the scanner port, by default it is 6077. If you have NOD32 antivirus, then go to your personal firewall, open the settings, select interactive mode, make a separate rule for the RemoteScan program. Install client applications on the desired computers, add special software there and perform scanning over the network.

5. Use another program to share the scanner over the network if your scanner was not detected by the previous application. To do this, download the Blindscanner program. Follow the link http://www.masterslabs.com/ru/blindscanner/download.html, select the required version, download and install the server and client versions of the programs on your computers, respectively. The setup is done the same way.

There is hardly a single computer user who would not be annoyed by the tangle of wires connecting all sorts of peripheral devices to the computer. Wires are extremely inconvenient when working with a laptop; they negate all the advantages of computer mobility. It’s not for nothing that connecting devices wirelessly—all kinds of wireless keyboards, mice, printers, and more—has gained such rapid and strong popularity.

You can also get rid of one more wire - the network wire - by organizing a wireless wi-fi network in your home or office. It will provide high-speed Internet access anywhere in the room without wires, making both work and leisure even more convenient. In addition, such a network will be available not only for computers, but also for other equipment that supports wi-fi, say, phones and printers. To set up wi-fi, you will need an access point or, if the Internet is supplied using special ADSL technology, an ADSL modem-router.1 . Connect and configure your wireless router. This process is quite primitive and accessible to any user. Follow the instructions provided in the documentation for your model. Let us only note that if this is permissible, then it would be better to make the distribution of IP addresses mechanical. This will simplify the procedure for logging into the network for new equipment.2. Configure your entire computer to work on a wireless network. Many laptops have a built-in Wi-Fi adapter, but a desktop computer may require a wireless network card, which will need to be purchased separately. Setting up a wireless network is slightly different from setting up a regular network. The only thing you need to do additionally is to enter a special secret network code generated by the router. The code will allow you not to worry about third-party users being able to connect to your wireless network.3. To connect to a wireless network of a pocket computer, it is easier for everyone to use the built-in iPAQ Wireless utility or a similar one, depending on the model of the pocket computer or phone. Here you will also need to indicate the secret network key. Once you have managed to set up wi fi, you will be able to not only use the Internet from any device on the wireless network, but also use a local network: provide universal access to folders, share a printer and scanner etc.

Video on the topic

You are probably familiar with the situation when you have two or more PCs at home. The exchange of information between them, the use of one printer or scanner, as well as other peripheral devices, requires the existence of a network. But PC users require not only access to local sources, but also to the vastness of the global network. In view of this, you should figure out how to configure exit V Internet from a public modem.

You will need

  • Personal computers, modem.

Instructions

1. Open the control panel of your entire PC, find the icon called “System” and click on it. In the “System” properties, go to the “Computer name” tab, select the “Change” option and assign your name to the entire personal computer, as well as one universal group.

2. To apply the changes made, reboot both electronic devices.

3. After restarting the PC, open the Control Panel, click on the “Network Connections” item and select the “Local Network” properties.

4. Configure the "Protocol" Internet a (TCP/IP)". To do this, you need to connect the modem you are using to the hub, manually enter the IP address, the mask of the created subnet, and also the “Road gateway”.

Video on the topic

Pay attention!
When assigning an IP address to all computers on the local network, carefully check them to avoid duplication, since the coincidence of the IP addresses of electronic devices can become a reason for their discord and, as a result, the impossibility of working on the same network.

Useful advice
On the “Road Gateway”, that is, the modem, enter the 1st address (for example, 212.120.0.1), and select the IP address for PCs included in the local network from the range 212.120.0.2 - 212.120.0.255. The subnet mask for all devices will be identical.

Several PCs in an apartment or office do not mean that you need to connect to all of them scanner or the printer separately. To make scanning and printing devices accessible to everyone, connect office equipment via networks .

You will need

  • – Several computers;
  • – scanner;
  • – driver;
  • – local network.

Instructions

1. Equip your computers with a network scanner ohm All local participants will have the opportunity to use office equipment on equal terms. networks. Positively set up and install equipment. To avoid complications in the operation of the network scanner but take into account some of its features and subtleties.

2. Please note that the network connection is connected scanner easily to the switch through the hub. If there are enough USB ports, then a hub is not essential. The main difference between network scanner ov from ordinary ones - lack of connection to one PC.

3. Follow the setup steps networks in the following sequence: - Install drivers for scanner a, from the manufacturer's disk to all computers connected to networks;- configure the drivers;- assign to the network scanner have your own IP address; - connect the equipment to the switch; - enter the IP value into the newly created TCP port. The network equipment will be connected to the server. The scanner will be able to send finished images to the specified computer or email address.

4. Consider the likelihood of customizing the ordinary scanner and with support for WSD service. To do this, connect the equipment to networks, make sure that scanner included. Click "Start" and go to the "Network" tab. Discover icon scanner and by right-clicking on it, select “Install”. In the User Account Control dialog box, click Continue. Click on the line “Your device is ready to use”, check the settings and click “Close”.

5. Now click “Start” again, find the “Control Panel” option, go to “Devices and Printers”. Make sure the network icon is present scanner A. Now perform the scan using the WSD service. Network name scanner and will be displayed on all computers participating in the local connection networks .

Pay attention!
The WSD service is available on Windows Vista systems.

Useful advice
The network scanner icon will be displayed with the name of the hardware being used.

At a certain stage in the formation of a retail trade entity, the manual form of accounting ceases to satisfy the needs of this trading enterprise. At the same time, the lack of an automated accounting system often leads to financial theft caused by employee abuse. Consequently, an automated accounting system “1C: retail” is being implemented at a trading enterprise, which needs to be positively configured.

You will need

  • – personal computer;
  • - “1C: retail”.

Instructions

1. Carry out the preparatory work. To do this, set up the “Store” (enter the name of the store and set up your account). “Warehouses” can be represented not by a single warehouse, but by an entire structure (utility rooms, sales floors and other objects).

2. Setting up “Products” involves entering the most detailed information about the products being sold: contractor, expiration date, composition, etc. Configure the “Prices” section. The pricing mechanism in this automated system is flexible and primitive: if a price metamorphosis is planned, in “1C: Retail” a date can be set from which new prices will begin.

3. When setting up “Discounts”, consider the fact that there are three types of discounts: when purchasing a product for a pre-specified amount, when purchasing a certain number of goods, using a discount card.

4. Complete the “Access Rights” setting: this will allow each user who will be granted access to this complex program to define only actions corresponding to his position. This will eliminate fraud on the part of the employees of this trading enterprise.

5. To improve the efficiency of your retail business, ensure that the equipment you use is properly configured. A responsible approach is needed to the selection of commercial equipment. Particularly common equipment includes a fiscal recorder, a barcode scanner, and label printers.

6. The final stage of setup is operational management. An inseparable stage of effective management is reporting and its review.

Pay attention!
If important tasks arise while working with 1C: Retail, immediately contact your system manager for support.

Useful advice
The 1C: Retail program is designed to minimize routine work. Due to the fact that it has most of the functions, this software is easy to customize.

The task of how to scan over a network using a USB scanner is not as difficult and complicated as it seems to many users of office equipment at first glance. First, you will need to select a router and flash its firmware. Find out how to set up a network scanner or multifunction printer with scanning capabilities in more detail below.

First of all, download the “OpenWrt Backfire 10.03.1-rc5” firmware from any reliable web resource.

  • Start installing the firmware using a special recovery utility for your router model - usually Firmware Restoration.
  • Organize a connection between the router and your computer using any LAN port.
  • Put your router into recovery mode. To do this, turn off its power and press Restore or Reset (depending on what is written on the button of your device).
  • After that, turn on this device and hold the button until the power indicator starts blinking.
  • Settings related to IP addresses should not be made. You can only assign your personal computer an address that will be different from the standard “192.168.1.1”.
  • Open the firmware recovery program and first disable the firewall - if you do not do this, the utility will still urgently ask you to do so.
  • Select the previously downloaded firmware file, which has a .txt extension. After this, wait a few minutes until the installation comes to its final end and the router appears at the IP address “192.168.1.1”.

First steps to set up

  • At the first stage, change the router password in the corresponding tab.
  • Configure access to the World Wide Web and DNCP servers. If you are not satisfied with “192.168.1.1”, then you can safely change it. In the future, you will need to configure the device specifically for this IP address.
  • The next step is to configure the packages. Click on “Update package lists” and use “Filter” to find packages nano, sane-backends, sane-frontends, xinetd, kmod-usb-printer, and then install them. Once this process is complete, be sure to reboot the router.

Setting up scanning

  • To successfully solve the question of how to scan over a network using a USB scanner, connect to your router via SSH.
  • After that, you can either be lucky or not. In the second case, you will have to make additional settings.
  • Now you have to start editing “/etc/sane.d/xerox_mfp.conf”. Add these two lines to this file: “usb 0x04e8 0x341b” and “usb libusb:001:004”.
  • Save your changes, and then check if the configured scanner is detected.
  • At this stage, you need to start setting it up locally. Add this line “192.168.11.0/24” to the file “nano /etc/sane.d/saned.conf” - in this case you need to specify the subnet of your router.
  • A small change will also have to be made in the “nano /etc/xinetd.conf” file. To do this, you need to add “service saned” to it, then between the opening and closing brackets “(…..), enter this code (without quotes):

"socket_type = stream
server = /usr/sbin/saned
protocol = tcp
user = root
group = root
wait = no
disable = no"

  • Finally, start xinetd in a mode called output. debug information. After this, you must make sure that the service is actually running. If this does not happen, then open the file “/etc/services” and if the line “saned 6566” is missing, be sure to add it.

Install SaneTwain

  • Download SaneTwain and install it. To do this, you need to run the file “scanimage.exe”.
  • After this, indicate the address of your router in the settings window that opens and restart the program.
  • Most likely, after restarting SaneTwain, you will encounter a server connection error. To solve this, pay attention to the “syslog” entry, which is located in the web interface. Then add to "host" an entry with the name for the device's IP address "root@OpenWrt:~# nano /etc/hosts".
  • Add the line “192.168.11.1 OpenWrt” there, and then restart the xinetd add-on.
  • Reboot SaneTwain - maybe this time everything will work as it should.
  • Open your router's web interface again and enable xinetd autostart there.
  • Copy the second file from the SaneTwain archive, which is called “sanetwain.ds” and send it to the twain_32 folder, which is located at this path: C:\Windows.

Setting up printing

  • To configure printing, install the package called “luci-app-p910nd”.
  • Then go to the web interface and check the boxes next to Enable and Bidirectional mode. In the Device field enter /dev/usb/lg0, and in Port simply put 0.
  • Then make sure that after rebooting the device the server starts normally.
  • Now set up the printer itself by filling in the fields with the port name and IP address. In addition, you will also need to enter the port number.
  • At the end, you can do a test print to make sure that all of the above steps were performed truly and correctly.

If necessary, you can clear space on your router for other software applications. The idea is to remove all those backends that are no longer useful to you. To do this, connect via ssh. You can find backends here: “/usr/lib/sane/”. The most important thing in this matter is not to get carried away with cleaning and thus not to destroy the files that are really necessary for the normal operation of the equipment.

Thus, setting up a scanner via USB so that it can be used over a network is not so difficult. Of course, the average user may encounter a number of names that are incomprehensible to them, so it is very important to follow the instructions and strictly move step by step towards solving the problem.

Today we'll talk about network scanning. Is it possible, of course it is possible. As you know, most MFPs do not have network scanning capabilities. That is, the scanner can only be used by one user sitting at the computer to which the MFP is connected. To be honest, in my practice, I have not seen an MFP that has the ability to scan over a network. But in large organizations network scanner or it would be more correct to say that a network scanner is simply necessary.

I came across networked MFPs that connect to the network, but they do not have the ability to use the scanner from several computers. And using standard means it will not be possible to achieve the ability to scan documents from several computers, and this is sometimes very necessary. Let's consider this situation: in some department where there are, say, three or four computers and MFPs. Setting up printing for all computers is not difficult.

But to do it network scanner so that every computer has the ability to scan documents will not work. Installing a scanner for each user is not very convenient, and it is also a costly affair. I myself came across a situation where I needed to make a scanner accessible over the network. I scoured the entire Internet and tried a bunch of programs. Most of them are paid, but they did not give money for purchase. After a long search I came across the BlindScannerPro program. With this program you can make a network scanner.

In order to configure the scanner to work on the network, you will need to download the BlindScannerPro program. The installation process should not cause you any problems, but just in case I took a few screenshots.

We agree to the terms of the license agreement and click next

Selecting disk space for the program

Here we choose whether to install a server or a client; we install the server on the machine where the scanner is connected.

After launching the program, you will need an activation key; you can download it at the end of the article. The client needs to be installed on those machines where the scanner is not connected. Next, we need to install the server, everything is the same, we just select the server and install it on the computer to which the scanner is directly connected. There are no special settings there, so I won’t write anything. Now you have network scanner. After you have installed the server and client, go to the computer with the client and launch ABBYY FineReader. There we click Service - Options, then go to the Scan/Open tab and select the BlindScannerPro driver and click OK. Next, click scan as usual. The BlindScannerPro Client window appears. Click on the plus sign and write the IP address of the server, that is, the computer to which the scanner is connected. A little lower from the drop-down menu, select the scanner that is installed on the server and click Scan.

Published: 02/11/2018

You will need

Local network; - scanner; - Internet.

Instructions

Use the RemoteScan 5 application to share the scanner over the network. Download this program from the link http://www.cwer.ru/node/6585/. Next, install it on your computers. Accordingly, on the computer to which the scanner is connected, the server version, on the remaining PCs to which the scanner needs to be connected via the network, the client version.

Please note that when installing the client version of the program, a message about the absence of a scanner may appear; do not pay attention to it. After installation of the server part of the application is complete, right-click on the program icon in the tray. To access settings.

Select a scanner, configure ports to access it. Please note that it may take one to three minutes to detect the device. If this does not happen, then your scanner model is not supported by the application.

Wait until the strikethrough icon disappears from the icon. Open your antivirus/firewall program. Allow access to the scanner port, by default it is 6077. If you have NOD32 antivirus, then go to your personal firewall, open the settings, select interactive mode, create a separate rule for the RemoteScan program. Install client applications on the desired computers, add special software and scan over the network.

Use another program to share the scanner over the network if your scanner was not detected by the previous application. To do this, download the Blindscanner program. Follow the link http://www.masterslabs.com/ru/blindscanner/download.html, select the desired version, download and install the server and client versions of the programs on your computers, respectively. The setup is done in the same way.

Set up a scanner over a local network

Many users have encountered a situation where the office has several computers and one printer (scanner or MFP). Most often, one or two MFPs with PCs connected via a local network are enough to perform office tasks. However, setting up a scanner over a network can cause a number of difficulties. This is due to the fact that Windows OS has a built-in print server, but there is no such scanning server. That is why we offer you instructions on how to set up scanning documents over a local network.

Read also:

We will organize the scanning server using the RemoteScan program. To do this, you should perform the following steps:

Download Remote Scan for Windows (7/8/10)

Version: 5.494.

Download

Run the downloaded file, select the installation language and click the “Next” button. Follow the prompts of the Installer Wizard and click “Next”. We agree to the license, and in the options window, check the “Install Server Software” box. The program instance will be installed in server mode, which will enable other PCs to use the network scanner. At the next stage, you need to make sure that the checkbox is checked, as in the screenshot.

IMPORTANT! The firewall may prompt you for permissions for the program. In this case, it is recommended to allow the program on all networks.

Launching the server version

You just need to select your scanning device so RemoteScan can share it. Double click on the required device.

The program will be minimized to tray and will then launch itself when you turn on the computer.

If you need to reconfigure the scanning device, you can always do this by right-clicking on the RemoteScan program icon and selecting “Choose a Scanner”.

As you can see, using the program is quite simple.

How to make a network scanner?

Master's answer:

A local network that connects several computers within one organization has some advantages in use: accessibility to common applications and files and the ability to share equipment: scanners, printers.

To make the scanner network-ready, you can use the RemoteScan 5 application. To do this, you need to download this program from the address: http://www.cwer.ru/node/6585/, then install it on each computer on the network. Accordingly, on the PC to which the scanner is connected - the server version, and on other personal computers to which the scanner needs to be connected via the network - the client version.

Please note that during the installation of the client version of the program, a message may appear stating that the scanner is missing. No need to pay attention to this. After completing the installation of the server part of the program, you need to right-click on the program icon in the tray in order to be able to use the settings.

You can then select your scanner and configure the ports to connect to it. Keep in mind that it may take up to three minutes to identify any device. If this does not happen, then this scanner model is not supported by the application.

Wait until the icon is no longer crossed out. After this, you should open your antivirus program/firewall and allow access to the scanner port. The default is 6077. If you have NOD32 antivirus installed, then you can go to your personal firewall, open settings, select interactive mode and start creating a separate rule for the RemoteScan program. You need to install the client version of the application on the appropriate computers, add special software and scan over the network.

Perhaps using another program to share the scanner on the local network will help if the previous application did not detect your scanner. To do this, you need to download the Blindscanner program, go to http://www.masterslabs.com/ru/blindscanner/download.html, select the desired version, download and install the server and client versions of the program on your computers, respectively. Perform the setup in the same way.

Canon 1133(a) - printing and scanning over local network and WiFi, setup

This article will describe how to set up Canon 1133 and 1133A MFPs for printing and scanning over a local network.

The Canon 1133 MFP is an interesting office-class device. Large cartridge (up to 6000 pages), double-sided printing. The 1133A has two-sided scanning. Large paper tray. Two network interfaces - wired (Ethernet) and wireless (WiFi).

Model 1133A differs in that it adds an automatic feeder to the scanner and the ability to double-sided scanning.

Since this is an office MFP, the most correct way to use it is a direct connection to the local network.

Connecting Canon 1133 (1133A) to a local network

The setup begins by connecting the MFP to the local network. This is done through the settings menu on the MFP itself. To connect via WiFi, you need to specify an access point and password for it. For a wired connection, you need to specify automatic receipt of network settings via the DHCP protocol, but if you do not have a router on the network (DHCP server), then you need to manually specify the IP address of the MFP. If you are using a wired connection, connect the cable to the MFP and to the router.

After saving the settings, you need to turn off and then turn on the MFP again. Using the MFP menu, check whether the device has received an IP address. The MFP panel has a quick button to access information about the device status.

Setting up the router

If a router is used on the local network, then you need to open the admin panel of the router and check the connection of the MFP to the local network there - it should be in the list of network clients that have received an IP address.

It is necessary to assign this address to the MFP on a permanent basis! So that the router assigns this IP address to the MFP every time it is turned on.

How to connect a printer scanner to a computer

Until this point, connecting a printer or scanner to a computer was quite a difficult task.

It was necessary to find a special port, make sure that all system drivers are correctly configured, and hope that everything is installed correctly and your OS (Operating System) will give you the opportunity to scan or print the treasured document. Thanks to these instructions, everything has become much easier. If your goal is to print documents, connect a printer or scanner to a computer, you need to set up remote access (print documents using the Internet), and you are asking the question “How to connect a printer or scanner to a computer” - these instructions are for you!

Connecting a Printer to a Personal Computer

Stage No. 1. Placing the printer next to the PC (Personal Computer).

Make sure the printer or scanner is within easy reach of the cable or port. In other words, the cable should not be tense, it should lie freely.

Advice: Carefully roll up the excess cable and tie it with a rope, this will help reduce tripping over the cable and increase its durability.

Stage No. 2. Software.

To facilitate the process of connecting the device to a PC, install the necessary software (software, drivers) supplied with the printer/scanner.

Advice: If you don’t have a disk with the software, don’t worry, the Windows system itself is capable of automatically detecting the printer and scanner that is connected to the PC. Also, if all this does not happen, you can go to the printer manufacturer’s website and download the driver you need yourself; as a rule, it is located in the “Software and Drivers” section (Almost all modern sites are able to detect your printer scanner automatically).

Stage No. 3. Connecting a printer scanner.

One of the next steps in solving the question “How to connect a printer scanner to a computer” is a direct connection to the USB connector.

Advice: At this stage, make sure that your printer and scanner is connected to a power outlet and to the computer.

Stage No. 4. Follow your operating system's instructions.

At this stage of connecting the printer scanner to the PC, your operating system will do all the work for you, just click next. At this stage, the complete and final installation of drivers occurs.

Advice: if the system before or after this stage still does not see your printer scanner: try connecting your cable to another USB connector, or completely uninstall the drivers and return to stage No. 2.

Stage No. 5. Check whether your printer or scanner was installed correctly and correctly.

Open the Start menu, click on “Control Panel”. Next, “Devices and Printers (View Devices and Printers).” Find the desired printer in the list of connected devices.

Ready! After these manipulations, your printer and scanner is connected and fully operational.

Scanners

Using a scanner, you can convert text, drawings or images into digital format for further processing, for example, saving old photographs printed on paper for many years. Flatbed scanners are usually chosen for home use. They are compact and easily scan thick media. For offices, broaching scanners are often preferred, which can process only paper sheets, but at high speed and in streaming mode. The Xerox company produces various types of scanners for home and office, with different dimensions, speed indicators and scanning modes, resolution, color rendering, maximum load in pages per day and other parameters.

Choose the Xerox scanner that is right for you, with a user-friendly interface, a wide range of functions, high reliability and an excellent price-quality ratio. Confirm your decision by reading numerous testimonials and reviews of Xerox equipment.

In the catalog on this page you can familiarize yourself with our range of scanners, go to the pages of specific products to evaluate the characteristics, read descriptions, look at photos, compare several models with each other and choose the device that suits you. You can buy a Xerox scanner from our partners in Moscow, St. Petersburg, Novosibirsk, Yekaterinburg and many other cities in all regions of Russia. To find out the addresses of stores in your region, click on the “Where to buy” button under the product image, and on the page that opens, select the city, republic, region or region you are interested in. Additionally, you can find out where to buy Xerox scanners using the following


A system administrator, by the nature of his activity, needs to know: how many computers are on the local network he serves, their names and IP addresses, how many shared network resources(folders, printers, etc.) created. In addition, he needs quick access to any of these shared folders. But if there are a lot of computers on the network with shared resources, then this task is quite problematic.
Programs help solve this problem - resource scanners, which perform a monotonic exploration of the network and calculate nodes that share resources. One of the most famous such programs is (old name).

The program can be downloaded from the official website. It is paid, but there is a free trial period.

We install it as usual. During installation, you may also be prompted to install another utility: . Decide for yourself whether to install it or not. Personally, I don’t need it, because... There are no computers with wi-fi adapters on my network. So I unchecked this box:

After launching the program, you will be informed about how many days it will work in free mode - click the “ button Continue” (“Continue”):

The interface language can be changed to Russian. To do this, go to the “File” – “Language” item in the menu bar and select Russian.lng.

Let's get started with the program. First of all create a new goal, for which you need to select the menu in the top list Target – Add:

Enter any target name: I named “ My network ”:

In the window that opens, write a name that is clear to you: for example, “ Office network " Next, indicate the range of addresses that need to be scanned (you can use the “Find IP range” button). Click OK:

After the address range is specified, to start scanning the network, you must select the menu in the top list Scanning – Scan:

The scanning time depends on the size of the range, the number and type of resources found, etc. In the status bar below you can see the scanning progress indicator, as well as the number of addresses and computers that have already been scanned.

After your network has been scanned, the names of all computers and their IP addresses will be displayed on the screen. If any of the computers has a shared resource, a check mark will appear to the left of it. By clicking on it, we will see a drop-down list that lists all the shared resources of this computer: shared folders, printers, etc.

In this example, on a machine named COMP there is a common Canon printer and general Users folder. We can open this folder directly from this window by double-clicking.

This is how it turns out: computers with shared folders are located on different floors of the building, and we see them all at once in one window and can go to any one.

It has quite a lot of settings with which you can influence the appearance of the interface, scanning parameters (for example, add a check for the presence of FTP and HTTP servers), and display of information.

The program (old name) can be called an indispensable tool for finding the necessary information on local networks in a minimum time.



Related publications: