How to change the front glass on an iPhone 4. Replace the glass separately on an iPhone if the touchscreen works

Broke your iPhone 4? Don't rush to take it to the service center. Below you can find detailed instructions for self-replacement at home.

During the operation of any smartphone, a situation may occur to each owner when the device suddenly falls. Sometimes the phone can suffer from careless carrying in jeans with narrow pockets. In the case of the iPhone 4, this situation happens often, because by modern standards it does not have highest level strength. If trouble happens, the owner has two options:

• replace the glass with another one;
• walk with broken glass on the display or rear panel.

Those who like to save money prefer the first option, not knowing that such an attitude towards their favorite device can cause many problems. It is quite possible to change the glass on an iPhone 4 yourself, but to do this you need to first read the instructions for performing such work, and also acquire the appropriate tools.

Replacement cost iPhone screen 4s, in some cases can be half the price of a fully functional device. Despite the fact that the iPhone 4 and iPhone 4s are almost identical in appearance, it will not be possible to switch from one phone to another. The reason is simple - contact mismatch. If parts are missing from store shelves, you should make your purchase online. You will also need the appropriate tools.

Pay attention! When purchasing tools, you need to select them specifically for the regular “four”. The fact is that the “S” generation changed the configuration of fasteners.

List of required tools

To fully complete the glass replacement work for iPhone 4, you will need the following tools:

• small Phillips screwdriver;
• special Pentalobe screwdriver;
• plastic spatula;
• a thin screwdriver with a flat blade.

Of course, the main tool that facilitates prompt and high-quality repairs is accuracy. There is no need to rush, because the procedure has its own specifics.

Instructions for self-replacement

Below we suggest that you familiarize yourself with all the stages of replacing glass with your own hands on the fourth series of iPhone.

After completing all twenty steps indicated above, you can completely replace the glass on the iPhone 4. All that remains is to install a new whole part, and then repeat the assembly steps in reverse order. During the assembly process, it is important to pay attention to the touchscreen and matrix cables. Make sure they fit completely into the gap without bending. The check is performed while pressing touchpad to the body.

What consequences can an owner face when using a broken device?

It also happens that iPhone owners 4 decide not to change the touchscreen, using the old broken one. On the one hand, the phone works, although the appearance is much worse than the factory one (the functioning of a broken iPhone touchscreen 4s is not always possible). On the other hand, the owner risks facing a number of problems:

• The picture is not displayed normally. Since a “mesh” is formed on the surface of the glass, it makes the image very difficult to see;
• Loss of factory seal. Even though the fourth iPhone is not one hundred percent sealed, the touchscreen surface is protected from water droplets and oily substances. The presence of cracks on the surface can lead to moisture penetration inside. While walking in the rain, your smartphone may turn off completely and you will not be able to turn it on again;
• brightness distortion. This defect is usually accompanied by a loss of color and picture clarity. The display itself displays information either in fragments or does not do it at all;
• presence of fragments in the smartphone. During sudden movements, they can disrupt the normal operation of the phone. It is quite possible that small particles of glass touch the contacts located on the cables, causing the components through the cables of which they are connected to the motherboard to stop working normally. In addition, the sharp edges of glass can damage the delicate and sensitive skin of your fingers.

Conclusions

Replacing the touchscreen is a mandatory task that must be completed as quickly as possible. This way you can be sure that your smartphone is working properly. The replacement procedure takes more than one hour, although in capable hands the recovery time is approximately half as long. If you cannot restore the device yourself, it is recommended to seek help from service center specialists.

Today's article is to help those who want to repair their iPhone on their own. Specialists from service center MacPlus will show you how to replace the touchscreen yourself iPhone example 4S. After reading this article, you can save a lot on repairs for your pet.

So what do we need for this?

iPhone 4 and its upgraded version 4s, on at the moment time, have already become a legend. Users of modern iPhone versions they remember the fourth version with nostalgia, compared to the breakdowns of the iPhone 5, that iPhone now seems very reliable. Then there weren't any iCloud locks and if you forgot your password, or the sellers set it up for you in the store, then you could simply reflash your phone, and it would be as good as new. But let's get to the point, how did the displays change then?

iPhone 4s screen replacement process

First of all, let’s figure out what the procedure for replacing glass on an iPhone 4s is. If you don’t want to read further or you don’t have the time and desire, then you can apply for replacement glass on your iPhone 4 here. Actually changing display module, consisting of glass, touchscreen and display. And when they talk about a glass replacement service, they mean that the entire display assembly will be replaced, and not the glass separately.

So, unscrew the two bolts from the bottom end of the iPhone and remove the cover; it should simply slide down at the top, towards the camera. And now we see the battery, system board, and a bunch of bolts screwed into it. Now the most important thing is to unscrew all the bolts and do not forget their location, since all bolts are different. Next you will have to unscrew the same number of bolts.

After we remove the motherboard, we will need to unscrew more bolts, only this time from the frame to which the screen is attached. 6 large bolts and 4 small ones.

Then everything is simple, take the display out of the iron frame and install a new one. Now comes the hardest part, you have to screw the whole mountain of bolts back in, and if at first you were too lazy to lay out the bolts and remember which ones came from, now suffer and be tormented.

The main difficulty at that time when replacing the display on the iPhone 4 was the problem with the proximity sensors. They didn’t want to work on some screens. Most of the craftsmen agreed that the Chinese did not paint the window in the glass for the proximity sensor correctly. We had to come up with ways to eliminate such a defect, because you can’t explain to the client that you had nothing to do with it, it’s just a crap spare part. But when they call us and ask a stupid question like “do you have an original screen?”, we always answer “of course, it’s original.” There is one thing, Apple does not supply its parts to any of its services. After all, they don’t have repairs, they just give you another device and that’s it. Therefore, all spare parts that are on sale have never been and will never be original.

Don't be naive and call different services and hope that they will tell you, yes, only with us original displays, others Chinese copy. Jobs himself supplies us with spare parts. Apparently these words are what customers expect when they ask about the originality of Apple parts.

Comments:

Unfortunately, on current moment a lot of smartphone manufacturers began to release their devices for...

This news comes as a surprise. Died... The one we loved, without whom we cannot spend even a minute... Sk...

Following the review of the new speaker system Oklick OK-441, we are children...

IN lately users actively buy secure smartphones, as they allow them not to worry...

Xiaomi famous for what it offers flagship phones By affordable prices, trying to get rid of it...

iPhone 4 smartphones serve not only as a phone, but also as a player and Internet tablet. Thanks to convenient interface They are often taken with them on the road, used at home and at work. Despite their functionality, the devices often break down. Their most vulnerable point is the screen. Unlike previous models iPhone 4 has a single display. It consists of them protective glass and sensor. The latter is responsible for the perception of touches. If one of the parts breaks, the entire module has to be replaced.

Why does the display need to be replaced?

The most common cause of failure is mechanical stress. If the smartphone body can withstand such loads, then the operation of the display is disrupted even with a slight impact on a hard surface. This part can also be damaged by fire or water. To protect the screen from liquids and shocks, experts recommend always carrying your smartphone in a special case.

iPhone 4 glass repair may be required in some other situations:

• when stripes appear;
• when cracks are detected;
• if part of the screen does not respond to touch and some others.

Service centers will offer you to repair or completely replace the display. It is possible to determine what is necessary in a particular case only after a detailed diagnosis. This service is carried out in mandatory, since it allows you to identify other malfunctions in the operation of the smartphone.

Is it possible to replace the glass on an iPhone 4 yourself?

Many users wonder whether it is possible to change the display on a gadget themselves. Today you can buy it in numerous online stores. At the same time, no one can guarantee that the purchased product is not a fake and will perform all its functions in full.

If you want to do all the necessary manipulations yourself, you will need not only special tool, but also a certain skill. This is due to the fact that the screen replacement procedure often leads to disassembling the entire phone. Some device parts are so close to the screen that they can easily be damaged during the “repair” process. This is a welcome sign that more complex and expensive manipulations may be required in the future. Therefore, replacing broken glass may seem like a simple task only at first glance.

Professional approach to glass replacement

If you want to extend the life of your gadget, seek help from specialists. The cost of the service usually depends on the number and severity of damage. It includes the price of components and labor. At the same time, diagnostics and backup data is often provided free of charge. More information about these services can be found on the website http://www.my-apple.ru/zamena_ekrana_iphone. Experts note: people often bring the phone thinking that the screen is not working. During diagnostics, it may turn out that in addition to the broken display, it also needs to be replaced internal components. Therefore only integrated approach allows you to restore the functionality of your smartphone.

In conclusion, it should be noted that the largest service centers located in Moscow have several branches. This allows iPhone users find the desired center and quickly get to it. Engineers will be sure to pre-announce the cost of all repair work and will try to make sure that you can use your gadget again soon. We use only original components, which must be tested and have the necessary documentation.

There are no complaints about iPhones - they work like a clock, they look like a very fashionable and stylish gadget. Their main problem is hidden only in appearance - such nice and smooth glass is terribly slippery. Dropping your phone costs nothing, and cracks on the once perfect surface are not long in coming.

Options for damage to iPhone 4s glass

As in any situation related to the failure of one of the parts of the smartphone, we can have several possible solutions at once. And the main thing to remember here is that there are two possible scenarios of events:

1). The entire screen is damaged, including the sensor block. As a result, the device does not respond well to touch, often freezes, and reboots. In this case, you have a direct route to the service center at iPhone repair 4s. Of course, you will hear many stories about how the owners changed the screen themselves, but they usually forget to mention that then either Wi-Fi does not turn on or appears in the speakers extraneous noise, or Power button sinks, or the display becomes “oaky”. If it works at all, sometimes you can’t even turn it on.

2). Only the glass was damaged. The phone behaves as usual, but it doesn’t look as stylish. But aesthetics is an important factor when buying an iPhone, so you don’t need to put up with this drawback. How to overpay for the services of a service center. Replacing glass (not the entire display) is one of the simplest procedures.

Glass can be purchased or ordered online. It is better to opt for the original one, since components not from the manufacturer usually have much worst quality. This applies not only technical characteristics, but also appearance. In addition to this, you will have to purchase special screwdrivers - Apple uses screws with an unconventional head; a regular Phillips head will not work.

How to change glass yourself

Let's try to figure out how you can quickly change the glass on the fourth iPhone with your own hands.

First you need to remove the covers - this is where screwdrivers come in handy. Then disconnect the cables so as not to damage them during subsequent procedures. Please note that they may tear, and then a trip to specialists cannot be avoided. Only you will have to pay a lot more for such repairs, and the warranty is not valid, because the device has been opened.

After this comes the most delicate moment - you need to soften the glue that attaches the glass, and to do this, heat it. Use a regular hair dryer or iron (of course, you need to hold the phone above it, not lean it against it). If not for this, glass replacement would be a completely safe operation. But the gadget can overheat, thereby causing deeper damage. In services, this is done using special equipment with which it is possible to maintain a strictly defined temperature, so there are no consequences. But at home you can make mistakes.

When the glue has softened, remove the glass - drag it with a suction cup or use tweezers. There is something like a cloth to protect the speaker - it needs to be re-glued to a new one. You install it, return the cables and the cover - and your iPhone is as good as new!

Very educational material, isn’t it?! I think that you have found a lot of useful information for yourself after reading this article on the site