How to find out the motherboard model. Using third party programs
If you need to determine manufacturer And model motherboard and at the same time, for some reason you cannot or do not want to start the computer and view this data software, that will help visual inspection. Of course you could look into documentation or just on box from the motherboard, unless of course you still have some of this after purchase and is available in convenient place. But this rarely turns out to be the case.
In case of factory assembly system unit, all basic information about the components contained in it (including information about the system board) is indicated on the sticker on the body.
If it's not there - remove the cover system unit (for this we need a Phillips screwdriver) and carefully look at the motherboard. Usually in the area central parts motherboard you will find what you need.
Knowing the model you can easily find drivers And characteristics on the manufacturer's official website by simply entering this data into the search engine.
It is worth noting that it is not always possible to simply visually determine the number; you may need take off PCI or PCI-E expansion cards, since manufacturers often manage to mark them in hard-to-reach places. And if you use laptop, then getting to the motherboard is completely problematic - you will have to disassemble almost the entire device. Therefore, this method of determination is not the best or simplest.
It is quite easy to determine the model and manufacturer of the motherboard using the console command interpreter.
We launch it either in the button Start – Command line, or in the window Execute(hotkey combination Win+R) – enter the short word “ cmd». 
In the window that opens, you will need to enter two commands, after each of which press the key Enter.
wmic baseboard get Manufacturer- company;
wmic baseboard get product– model. 
We use standard tools
You can also define this information standard means operating system by running System Information.
Execute– enter msinfo32.
In the window that opens system information On the right you will see the data you are interested in. 
However, there are situations when in this way or in the manner described above with the command line, it is not possible to obtain the necessary data. You will see a message that the motherboard installed in the computer is not recognized. 
In this case, the model can be found using third party specialized utilities.
We use third-party software
There are countless such programs. The most popular and effective - AIDA64(or similar Everest utility), CPU-Z and Speccy. Their interface is simple and understandable for every user and working with them will be simple and convenient.
IN AIDA64
information about the model is indicated in the section System board(Motherboard in English version). 
The disadvantage of this program is that it is paid, trial version available for 30 days.
Absolutely free, unlike Aida64 CPU-Z.
Special section Motherboard will provide comprehensive data about your motherboard.
Speccy also completely free. Everything is intuitive, select the item in the left column Motherboard and look at the information about the motherboard. The program is also convenient in that it allows you to copy the required parameters to the clipboard, in order to then, for example, enter them into the field for a search engine request to find the appropriate drivers and detailed information with a description.
Finally, we note that the motherboard model can be seen during system boot for 2-3 seconds, although this happens very quickly and this method is unlikely to suit you.
The motherboard is the main component of any computer. It is the motherboard model that largely determines what it will be capable of. this computer and what components can be used with it. Therefore, users are often interested in how to find out their motherboard on Windows 7 or Windows 10.
How to find out your motherboard using built-in tools
If you need to find out your motherboard, then you can try to get this information using the tools built into Windows 7 or Windows 10, without using third party programs. Most reliable way This is to use the “Command Line” and execute the command “”.
In order to use this method you will need. To do this, press the combination Windows-R keys, enter the command “cmd” and press the enter key.
After opening the Command Prompt, enter the command " wmic baseboard get manufacturer,product» and press the enter key again. As a result, information will appear on the command line from which you can find out the manufacturer of your motherboard (Manufacturer), as well as its exact name(Product). The screenshot below shows that the TUF B350M-PLUS GAMING motherboard is used, from manufacturer ASUS. This command Works equally well in both Windows 7 and Windows 10. Therefore, you can use it in any of these operating systems.
Also, in some cases, you can find out your motherboard using the System Information tool. In order to open it, you need to press the Windows-R key combination and run the command “msinfo32”.
After this, you need to select the “System Information” section and look at the “Manufacturer” and “Model” parameters. The manufacturer of the motherboard should be indicated here, as well as its exact name.
The System Information tool is also available in both Windows 7 and Windows 10. However, it doesn't always have motherboard information. It is not uncommon that the “Manufacturer” and “Model” parameters are not filled with any information.
How to find out your motherboard using third-party programs
If the methods described above did not work for you or seemed too complicated to you, then you can find out your motherboard using third-party programs. There are many programs that provide information about the characteristics of your computer. With the help of such programs you can obtain almost any necessary data. Moreover, such programs work perfectly not only in Windows 7 and Windows 10, but also in other versions of the operating system Windows systems.
For example you can use . Install this program to your computer, launch it and go to the “Mainboard” tab. Here you can find out your motherboard, its manufacturer, as well as some other information, for example, BIOS manufacturer and his version.
Another option is free. In order to find out your motherboard using this program, launch it on your computer and go to the “Motherboard” section. Here at the very top the motherboard manufacturer (Manufacturer) will be indicated, as well as the exact model name (Model).
You can also find out your motherboard using other programs. For example, you can use programs such as AIDA64, HWmonitor, HWINFO64 and others.
How to find out your motherboard without Windows operating system
If you have not yet installed the Windows 7 or Windows 10 operating system, then you can find out your motherboard with using UEFI BIOS. To do this, turn on the computer and press the key to enter (usually Delete). The name of the motherboard is usually indicated already on start screen UEFI.
If you have an old motherboard with a classic BIOS, then there may not be information about the name of the board. In this case, you need to remove the side cover from the computer and examine the inscriptions on the motherboard PCB. In any case, the name of this model and its manufacturer should be indicated there.
Sometimes users have to deal with the need to determine the model of the motherboard installed on personal computer. This information may be required for both hardware (for example, replacing a video card) and software tasks (installing some drivers). Based on this, let's consider in more detail how you can find out this information.
You can view information about the motherboard model in Windows 10 using both third-party programs and standard tools of the operating system itself.
Method 1: CPU-Z
- a small application that must be additionally installed on your PC. Its main advantages are ease of use and free license. To find out your motherboard model using this method, you only need to perform a few steps.
Method 2: Speecy
- another pretty one popular program to view information about the PC, including the motherboard. Unlike previous application, has a more pleasant and user-friendly interface, which allows you to find even faster necessary information about the motherboard model.
Method 3: AIDA64
A fairly popular program for viewing data about the status and resources of a PC is. Despite the more complex interface, the application is worthy of attention, as it provides the user with all necessary information. Unlike previously discussed programs, AIDA64 is distributed on a paid basis. In order to find out the motherboard model using this application, you must follow these steps.
Method 4: Command Line
You can also find out all the necessary information about the motherboard without installing additional software. You can use the command line for this. This method is quite simple and does not require special knowledge.
Obviously, there are many different software methods for viewing information about the motherboard model, so if you need to find out this data, use it using software methods rather than physically disassembling your PC.
How to find out the model of the motherboard installed on your computer using Windows and using third-party programs. In the Windows operating system, you can find out the motherboard model in several ways, which I will discuss in this article.
A computer consists of individual blocks (devices) assembled together to interact with each other. The main device of the computer is the motherboard on which the various components PC, other devices that are part of the computer are connected to the motherboard.
Why is it necessary to find out the model of the motherboard on a computer? Determining the model is necessary when upgrading (updating computer hardware), installing drivers, etc.
The model of motherboard determines which processor can be installed on a given computer, BIOS model and chipset, type support RAM(DDR2, DDR3, DDR4), peripheral devices etc.
In the case of drivers, it depends on the model of the motherboard (system) board which drivers should be installed on a given computer. Therefore, it is important to find out the name of the motherboard manufacturer and the model of the motherboard.
There are several ways to determine the motherboard model:
- visual inspection;
- using utilities and tools of the Windows operating system;
- by using third party utilities for system monitoring.
The first way is visual inspection, is mainly applicable only to desktop computer. After opening the system unit, the user can see the motherboard brand designation printed directly on the printed circuit board itself.
Determining the model of a laptop motherboard in this way is very problematic. In this case, it will come to the rescue software. Next we will look at 7 different ways for information about your motherboard model.
How to find out your motherboard model using Windows System Information
In Windows 10, go to the Start menu, open the Tools folder in the list of programs Windows administration", click on "System Information". In Windows 7, follow the path: “All Programs” => “Accessories” => “System Tools”. In Windows 8.1, to call “System Information” you will need to enter a command, read more.
The System Information window displays detailed information about the system, hardware resources and software environment. Opposite the “Manufacturer” and “Model” elements, you will see information about the manufacturer and model of the motherboard.
Getting motherboard model information using DxDiag
Enter the following command in the command line interpreter window:
Wmic baseboard get Manufacturer
After executing the command, the window will display the name of the motherboard manufacturer (Manufacturer), in in this case- Gigabyte.
Wmic baseboard get product
The model (Product) of the motherboard will appear in the command line window - B85M-DS3H.
If it is difficult for a novice user to find out the motherboard model through the command line, use other simpler options.
Conclusions of the article
The user can find out the motherboard model using different methods: using utilities and tools of the Windows operating system, or third-party programs for monitoring equipment and system.
Hello everyone, Do you have a computer or even a laptop, well, that’s cool, because it seems to me that you simply cannot live without a computer now! A computer is everything for some, and even more for some...
Well, I think that you know that the motherboard is the most important device on the computer, many other devices are connected to it and it commands them. We can say that the motherboard is the foundation of the computer.
In general, if you suddenly have a motherboard box or instructions, then look, its model should be indicated there somewhere. Usually you can see it on the box itself, it is usually written in bold letters...
I will show you how you can find out the motherboard model, but the method is quite unusual and not everyone knows about it!
Look, hold down the Win + R buttons and write the following command there:
And click OK:
Then it will open black window (command line), insert this command into it:
wmic baseboard get product
Press enter and get this result:
This is GRYPHON Z87, this is the motherboard model! The only funny thing is that the manufacturer is not displayed here, this is of course bad, but there is a model. I have an Asus Gryphon Z87...
To see the full name of the motherboard, well, there is the model and manufacturer and in general all the information, then I advise you to install a program for yourself, believe me, it is easy to install and there is nothing complicated about it. Many users know the program, this best program to find out as much information as possible about your hardware! You can see the motherboard there on the Motherboard tab:
In general, it seems to me that the program is necessary
In the most severe case, you can just look at the motherboard itself, if you can remove the cover from the computer, the model is also usually indicated there either near the video card connector or near the RAM connectors. But not always, I’ll say right away, there were boards where I couldn’t understand where that model was written... But here’s an example where it’s indicated next to the RAM:
And here it is near the video card slot:
But as I already wrote, on some motherboards it is difficult to understand where the model is written. Either it wasn’t listed there at all, or I simply couldn’t find it... But in any case, it seems to me that it’s better to watch the program, and it’s faster and easier...
Well, here's how the model is indicated on the box:
Well, with the box, I think you would have understood everything without me...
I'll also write my thoughts. I don’t quite understand why they don’t do all this in Windows? Well, I mean, why don’t they make it so that in Windows you can see all sorts of information about the board, about the process, about the RAM. It's been a year since users have been using some kind of program when they could already build it in. When Windows 10 came out, I thought that it would show not only the number of threads in the manager, but also a lot more. But it turned out that no, they consider this unnecessary, but Windows 7 had a performance index that, in my opinion, showed a not entirely correct assessment of the hardware...
