Beeline SIM card does not work on the phone - reasons and what to do? Guide to activating a Beeline SIM card How to connect a new SIM card to a Beeline phone.

As a rule, when you buy a new SIM card in one of the stores owned by the Beeline mobile operator, you receive an envelope with the card itself, an agreement and a booklet with some instructions. In most cases, salon employees activate the Beeline SIM card right on the spot, but sometimes they cannot complete this operation for some reason. In this case, you will need to perform activation yourself. This is done in just a couple of minutes.

Activation of a new Beeline SIM card

The procedure for activating a Beeline card is required only for a SIM card that has not been used anywhere before, and it is done as follows:

First of all, insert the SIM card into the special slot on your phone and turn it on.
If a pin code is required, enter it. It is located under a protective coating on a plastic card to which a SIM card or . Rub off the coating with your fingernail or coin, then read the four-digit pin code. If you entered this code incorrectly several times in a row, you can restore access to the SIM card using the puk code, which is indicated next to the pin code.
After turning on your phone, make sure that it is within range of the network. After this, to activate the starting balance of the card, enter the command *101*1111# call. If activation is successful, a special SMS notification will be sent to your number.

You can check activation using the command *102# call. If the response shows the balance of your SIM card, then it is valid.

Activating the starting balance on a tablet is carried out in exactly the same way as on a phone, and on a USB modem you can perform the procedure from the account management menu.

Activation of a blocked Beeline SIM card

You can not only activate a new Beeline SIM card yourself, but also restore access to a previously blocked one. If you need an old SIM card, you can do it in several ways, depending on the reason for which it was frozen:

If the card is blocked due to non-payment, it is enough to top up the SIM card balance with an amount that will be enough to pay the debt. The balance will have to be topped up, since the trust payment on a blocked card is not valid.
You can activate a Beeline SIM card that you previously decided to block using an application sent by fax or handed over personally to the employees of one of the Beeline offices. You need to be prepared for the fact that the number assigned to the SIM card may be unavailable (if you have not used it for a long time).

If for any reason you cannot activate your Beeline SIM card, contact technical support at 8-800-700-8000 or use one of the alternative numbers written

The Beeline SIM card you purchased has not yet been activated. Many users immediately ask a consultant at a communication salon to help them with this. All starter plastic bags or the instructions for them will contain information on how to activate a Beeline SIM card, but not all methods are listed there. We will introduce you to all possible options in this article.

Activating a SIM card from your phone

Most often, people buy SIM cards for their mobile devices, less often for tablets and modems. Therefore, there are a lot of activation methods from a smartphone: from the simplest – typing a command, to a personal account.

Unpack the starter kit, remove the SIM card, remove the back cover from the phone and insert it into the special SIM slot. Turn on the device, enter the PIN code and wait for it to find the network.

How to activate a Beeline SIM card via USSD request

Every subscriber can work with ussd requests. This is the fastest and easiest way to interact with your operator, which does not require either access to the Internet or communication with a specialist.

Enter a combination of symbols and numbers on your phone's keyboard * 101 * 1111 #, then wait for information about successful Beeline activity. After this, you will be able to use the services of the cellular company. Check this opportunity by dialing * 102 #, you will receive information about the status of your balance. If the action is not completed, it means that your SIM is not yet active.

How to activate a Beeline SIM card through the service guide

The service guide allows the subscriber to manage the SIM card directly through the menu of his device. You can use it from a modem.

Find the section in the menu "Account Management", then "Top up your account", . You can also perform this action manually through “My Computer”, then you will find the “Beeline” system disk, where you need to select the “Setup.exe” file.

How to activate a Beeline SIM card through your personal account

Your personal account is a service for Beeline clients, with which you can manage your number, services, tariffs, packages, subscriptions, make money transfers from your phone and much more.

To use your personal account, you first need to activate your starting balance:

insert SIM into mobile, modem or tablet,
turn on the device,
login to the network,
enter some address in the browser,
if the transition succeeds, the starting balance is active, and if not, you will be directed to the site where there will be instructions for you,
press the button "Start using".

Only after your number becomes active will you be able to log into your personal account https://moskva.beeline.ru/login/. To do this, enter your number without the country code, or your personal account, login consisting of numbers and letters in the “Login” field. The password is one-time and can be obtained by sending the command * 110 * 9 #.

Activation of a Beeline SIM card through an operator

Each Beeline user must have a consultant operator number in their address book. You need to make a call from exactly the SIM card that you need to make active. To do this, call 0611 or 8 800 700 0611. Outgoing calls to these numbers are free.

First of all, you will hear the voice of the autoinformer; you must follow his instructions. Since the information in the voice menu is constantly changing, it is difficult to say what combination you need to dial to contact a live operator instantly. Often this is 0, then 0 again. The answering machine will forward your call to a specialist and you need to wait for an answer.

There is an additional operator-consultant number, free from all over the world - +7 495 974 8888.

Activating a Beeline SIM card on a tablet

Depending on the operating system your tablet is running on, the activation method may vary slightly. For iPad, follow these instructions:

go to menu and select “Settings”,
in the column "Cellular Data" select “SIM programs”,
go to “My-Beeline”, then “Other services”,
there you will find a field "SIM activation",
click "OK".

There is a special technical support department for subscribers who use Beeline via a tablet, this is phone number 8 800 700 8000. If the operation does not work, call and they will help you solve this problem.

Activating a Beeline SIM card via a USB modem

Before using home Internet from an operator, you should make sure that the SIM card is active. To perform this action, you must follow the instructions:

Launch the program to manage your modem.
In the main menu there will be an item "Account Management".
Click on the column "Top up your account".
Click “Activation of starting balance”.

If you have unresolved questions about the USB modem from Beeline, you can contact specialists for help by calling 8 800 700 0080.

Activating a blocked Beeline SIM card

There are several reasons for SIM blocking: due to incorrect entry of pin and puk codes, voluntary blocking in order to save money, as well as forced blocking due to insufficient balance or non-use of the number for a long time. Depending on this, the unlocking methods are different.

We activate the number after entering the pin incorrectly and losing the puk code.

To activate a Beeline SIM card, you will need to use a special command. This can only be done on a device that allows calling. But there are ways to work with other equipment that does not have a bell function. Let's consider the procedure for any technique.

In order to connect a new SIM card to your phone yourself, you do not need to contact your operator. At the moment, only special tariff plans that are presented for a narrow circle of subscribers in accordance with the terms of corporate cooperation have a special activation code that allows you to activate the promotional offer.

Procedure:

Insert the SIM card into the phone and enter the PIN code that is indicated on the holder. It is usually covered with a protective film that is easy to wipe off.
Wait until the smartphone detects the new SIM card and make sure there is a connection.
To activate the Beeline starting balance, enter the command *101*1111# and wait for a response notification.
You can check the status of your SIM card using the combination *102#. The current balance will be displayed on the screen, which indicates that the number is active.

You can check whether the SIM card is working correctly by sending a call or message to any subscriber. If there is a stable network, the user will be able to reach a Beeline contact.

Entering the PIN code incorrectly three times will result in the SIM card being blocked. You can unlock it yourself if you enter the PUK code, which is indicated on the same holder.

Activation on the tablet

The first connection and activation of the SIM card on a tablet device is carried out in the same way as on a phone. If there is a call function, the subscriber only needs to use a special USSD command. If you don’t have one, you can contact the Beeline sales office directly and solve the problem on the spot.

Most tablets do not require any special steps. They can make calls and this is already enough to quickly activate the number through a command in dialing mode.

Registering a SIM card on a USB modem

Activating a SIM card and registering it in the operator’s network, if the carrier device is a modem, is also easy. To do this, just use the original Beeline program, which is installed automatically on your tablet or computer.

Instructions:

Turn on the software, making sure that the Internet and the Beeline network are working normally.
Go to the “Account Management” section and select the “Account Replenishment” category.
Click on the “Start Balance Activation” button.

After this, the SIM card on the modem will be fully working and the subscriber will be able to use Beeline mobile Internet.

If you have any questions about registering a SIM card in a USB modem, please call 0611 and 8 800 700 0080.

Activating a blocked SIM card

To get your card working again, you can use:

“Personal account” - if the blocking was carried out by the owner of the number;
by contacting the support service - by calling internal phone 0611 (the call is free), the subscriber can resolve any issue;
a personal visit to the Beeline sales office - you need to take with you an ID card and a smartphone with an inserted SIM card.

Restoring a blocked SIM card is not always possible. In the event that the blocking occurred on the part of the operator for serious violations of the user agreement or debts that the subscriber has not repaid, the number may not be returned. If we are talking about temporary blocking, the client does not even need to personally contact a Beeline specialist to mark the operation.

You can get the password for your personal account by using the command *110*9#. It works for tablets and USB modems.

Why is activation not happening?

Activation does not occur if either the SIM card itself or the device into which it was inserted is damaged. To check the cause of the problems, just change the equipment and try to activate the number again. If this happens without delay, then the reason is in the smartphone or tablet. In the event that the card does not work on any equipment, you must contact the operator’s support service or personally visit the sales office. This means that the physical media of the number and balance is damaged. The company’s specialists will replace it with a working SIM card for free.

Another common option is lack of communication. In this case, you will have to wait until the Beeline network resumes operation. Without stable access to it, it is impossible to send a USSD command.

After purchasing the Beeline starter package, you can use the number only when it is activated. Connecting the card to the network allows the subscriber to access any options and services. This must be done for any device, including a USB modem with mobile Internet.

Activating a Beeline SIM card is not such a complicated process. It is enough to follow the simplest instructions possible, then you will definitely not have any problems in the future during preparation.

You can purchase a card both at the operator’s showroom and at various retail outlets that simultaneously handle connections. It is provided in a special envelope containing all the basic information.

During the purchase, you can choose the most suitable tariff for yourself. Connection occurs only for those offers that are currently open. There are also archived tariffs, they are closed and their support is gradually being discontinued.

You can immediately choose the number you like. Usually it is indicated on the package, and the employee provides the opportunity to choose one of the currently available options.

When purchasing, it is important to consider the card format. There are several solutions:

Mini. A map with the usual dimensions. Mostly used in devices of older models; in new phones it is used extremely rarely.
Micro. Slightly cropped format. Today it is very common and suitable for many smartphones.
Nano. The most compact card to date. All that remains of the design is the main chip.

Many operators provide universal cards. You can squeeze out a product with a suitable format for your device from the plate, and then install it in the device.

Activation

Are you interested in how to activate a Beeline SIM card? If you bought a starter package at the operator’s salon, you can carry out the operation on the spot. To do this, you need to contact one of the specialists directly, he will provide assistance.

You can activate it yourself. To do this, you need to squeeze out the block of the desired format from the main plate and install it in the slot. How to proceed next:

Start your phone.
If it asks for a code, then erase the special protective layer from the plate and enter the numbers. You can also find it in your personal account on the official portal.
After turning on the device, wait a moment for the device to detect the network.
Then you need to enter the code *101*1111# and send the request.

This is the easiest way to register a card. After submitting your application, you will receive a notification about connecting to the network. To check the success of activation, view your balance by requesting *102#. If the amount is displayed, then you have done everything correctly and you can use the services.

There are also individual cases, for example, devices with two SIM cards. They can have either one or two modules. What's the difference:

Activation when blocked

How to activate a Beeline SIM card if it has been blocked? Much depends on the reason:

If the blocking occurred due to debt, then you need to top up your account. You will have to transfer money to the number, because the Trust Payment service does not work in this case.
If the card was blocked for another reason, you must send an application by fax, or come to the office in person.

When the card has been blocked for an extended period of time, you may lose the right to the old number. After a certain period, it is returned to the database and issued again.

Other activation options

If you use a modem, the procedure can be carried out directly on your PC. Of course, you can use the standard option and activate on your mobile phone, and then move the card to the module. But in reality this is not entirely convenient.

How to activate from a tablet or modem? Just install the card and go to the beeline.ru portal. On the page, click the button to start using, after which you will see that the activation was successful.

This method is as convenient as possible, and the whole process takes only a few minutes. For users who do not have the opportunity to pre-insert a card into the phone, this option will be the best choice.

Now you know how to quickly activate. Choose any option that suits you.