The disk is write protected transcend 32gb. Removing write protection from a flash drive

One of the most reliable means of storing personal information is flash media. For many, such a device becomes the first assistant in their work; with its help, you can easily carry the necessary information just in your pocket. When it comes to the security of storing various programs and files, special software is often used. It is designed to protect the media from copying, deleting or moving materials, as well as from reading, without entering a special code.

But even if you have not used such programs, and when you run the command to transfer its contents, an error appears: “The disk is write-protected,” do not panic, determine the reason and use the suggested methods. Removing protection from a flash drive is not a difficult task at all, and most importantly, it can be solved and is more economical than buying a new one.

Reasons

• Incorrect Windows settings, for example, a software ban installed in the operating system;
• Failure of the media, often poorly produced “flash drives” - Chinese counterfeits of world leaders;
• The physical switch is in the wrong position;
• The host is infected with a virus;
• Malfunction of computer USB ports;
• Lack of a driver responsible for correct device recognition;
• Incorrect use. For example, you cannot remove the media until the process is completed: writing, downloading, renaming, moving or reading;

Proven methods for removing protection from a drive

We present to your attention the “TOP 7 effective ways” on how to remove write protection from a flash drive, all of them have been tested and confirmed by a large number of users.

Hardware method using Windows command line
First you need to start the line, we do this by simultaneously pressing two keys on the keyboard: Windows + R. The “Run” window will open and enter the command “ cmd"and press the OK button;

The system response is to open the command line;

Required to enter " Diskpart»;

and press Enter. A new window will open - disk management program;

To continue, enter " list disk", confirm the action by pressing the Enter button;

In the window that opens, a list will appear on which you need to determine the number of the required media, focusing on the amount of memory, in our case it is Disk 5 - an 8Gb flash drive. Select a disk using the command: select disk )(, where -)(, this is the disk number, in our case 5;

After it has written to you: “Disk selected )(”, enter the following command, which will remove the block from all protected files that had a “read-only” error when opened. Command: attributes disk clear readonly(can be copied);

When “Disk attributes have been successfully cleared” is displayed, you can exit the program by entering the “Exit” command.

After closing the utility, check the media for functionality. Once you are confident in the operation of the method, you can continue to use the device without extra costs.

Virus scanning
One of the most relevant ways to solve this problem is also to scan the media for virus infection. To do this, you will need to go to “My Computer” and right-click on the name assigned to the device by the operating system, for example, “Disk Z”.

Then select “Check for viruses” in the menu. After a few minutes, the scanning result window will appear on the screen. This method can be applied to any antivirus software installed on your PC.

The flash drive can be write-protected by unauthorized installation of virus software. A clearly demonstrated method will help solve this problem, and will also protect your computer from automatic installation of unnecessary gadgets.

Hardware button on the carrier. Mechanical protection
Some models of portable USB drives have built-in protection that is turned on/off using an installed button. Be sure to pay attention to this; to allow recording and moving, the button must point to the “open lock.”

Formatting
Often, to eliminate such an error, utilities created for formatting are used. Remember, using this method will completely delete all files from the media.

Applying Windows Group Policy
It is possible to restrict rights by local group policy; the elimination of such infringement of rights should be carried out by following the algorithm:
Press Windows + R at the same time and enter the command gpedit.msc, click OK;

In the window that appears, go through the tabs sequentially:

1. Computer configuration;
2. Administrative Templates;
3. System;
4. Access to removable storage devices.

By clicking twice, an option window will open;

Check “Disable” → “Apply” → and confirm by clicking “Ok”.

By completing such a simple process, you can easily remove the interference in the infringement of the rights to use the media and continue working.

Programs to fix errors

Soft disks are designed for expensive storage media; for less valuable storage devices there are also a lot of programs, for example:

JetFlash Recovery Tool- a free program in the public domain, intended for media from A-Data and Transcend. Its main functionality includes the ability to eliminate writing and reading errors, as well as unlocking. After downloading the utility from its creator’s resource, run it using the file of the same name, .exe format. After waiting for installation, click the JFRecoveryTool.exe shortcut. When the working window opens, insert the USB flash drive into the USB input and click “Start”. After the process is completed, check the drive to see if the error has been resolved.

Apacer Repair- the utility is created individually for media produced by Apacer Technology Inc, and is also applicable for third-party drives. The functionality can eliminate recording problems. It is recommended to download the program from the official resource, where it is posted and available for download completely free of charge. After completing the download process and connecting the USB drive, run the utility. First of all, she will do the formatting, for which there will be a warning. By clicking “Format”, the successfully completed process will allow you to forget about the recently disturbing problem.

Knowing the brand name of your carrier, it will not be difficult for you to select the required program; there are tons of them on the Internet. It is to solve such problems that manufacturers create them and post them on Internet resources; it is worth noting that they are all freely available.

It is not always possible to determine the true cause of a malfunction and remove write protection. But having used the above methods, based on the result you will understand exactly what to do next: safely use a working device, or buying a new one will become an inevitable event.

We do not guarantee the safety of information!

Sometimes there are cases where it is impossible to format a USB flash drive or SD card, transfer or write data to them. Windows displays the error message " The disc is write protected. Remove protection or use another drive". Many devices come with a lock lever on the flash drive itself. Make sure that the lever itself on the SD card or flash drive is set to " unlocked"Unfortunately, in some cases, devices may be physically damaged, which will lead to the purchase of a new one. If you are sure that everything is in order: the lever is unlocked, the device has not been subjected to physical shock, then we will consider ways to resuscitate drives and try to remove the protection from recording from flash drives and SD memory cards.

How to remove write protection from an SD card, flash drive or disk

An error when an SD card, flash drive or disk is write-protected may be technical and nothing will help. But there are many cases when malware can change settings in the registry and thereby block the formatting of a flash drive. We will also use special utilities from flash drive manufacturers that will help fix the error if it is a regular software failure.

Note:If there is a physical formatting blocker, then first check the lever on the flash drive or SD memory card; most likely it is blocked.

1. Using the registry

Press a combination of buttons Win+R and enter regedit to enter the Registry Editor.

Follow the path:

• HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies

If you don't have a parameter StorageDevicePolicies, then create a partition named StorageDevicePolicies by right-clicking on the folder Contorl. If there is a value, then see below what parameters should be.

Go to the created StorageDevicePolicies folder, select it, and right-click on the empty field with the right mouse button and Create > DWORD value (32 bits). Give the new parameter a name WriteProtect, then double-click on it with the mouse to open properties and assign a value 0 . Restart your PC and check if it gives you the error that the disk is write protected. If this method does not help, then move on.

2. Using CMD

Insert the flash drive or SD memory card into the computer's USB port and run Command Prompt as administrator.

Enter the following commands:

• diskpart- launching a tool for working with disks.
• list disk- shows which drives are connected to the computer. The flash drive in my case is located Disc 1 size 7640 MB.
• select disk 1- Where 1 this is the disk number shown above. Disc 1 in my case this flash drive.
• attributes disk clear readonly- clear the attributes of the flash drive.
• clean- clean the flash drive.
• create partition primary- create a section.
• format fs=fat32- format it in FAT32. (You can change fat32 on ntfs, if you use a flash drive only on Windows systems.)

3. Using Group Policy

Click win+r and type in the line gpedit.msc.

Navigate to the following paths: Computer configuration > Administrative Templates > System > Access to removable storage devices. On the right, find the items " Removable drives" And turn off by double-clicking on the desired line - write, read, execute, if enabled.

Hello everyone friends. Today, I want to tell you about how to remove write protection from a flash drive in the shortest possible time and without much difficulty. The thing is that the other day, as usual, I wanted to copy a certain file to a flash drive, but in response I saw a message of a similar nature: “The disk is write-protected. Remove protection or use another disk." What kind of things are these? After all, such cases had never happened before and everything worked perfectly. As a result, I began to look for ways to solve this problem, which I will discuss in this article.

First, let's look at the main reasons why write protection may appear:

— The integrity of the file system was violated, for example, due to improper use of the flash drive (for example, after finishing work with the flash drive, the function of safely removing the device is not used)

— The flash drive was attacked and infected with viruses. The most common reason.

— Trivial damage to the flash drive itself. She fell somewhere or was subject to a strong blow.

— A special switch is installed on the flash drive, which prevents infection by viruses and puts write protection on the flash drive.

We have figured out the reasons, now I will tell you how to remove write protection from a flash drive using software and mechanical means.

Mechanical method of removing protection from a flash drive

As for the mechanics, everything is very simple here. Carefully inspect your flash drive for the presence of a so-called switch, which mechanically installs protection on the flash drive. Below, I have given several examples of flash drives with such a switch. If yours has such a switch, just move it to the other side and everything will work.

If the situation with the switch does not solve anything, we move on to software methods for removing protection from a flash drive.

Removing protection using the OS registry

1) In order to remove protection from a flash drive using the operating system registry, we need to click the Start button and enter regedit (command for editing the registry) in the search field. After that, right-click (right-click) on the icon that appears and select the item – Run as administrator.

2) Now we need to find a special section called – StorageDevicePolicies, which is responsible for prohibiting writing to the flash drive.

It should be located in the following path:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies

Important! If you do not find this partition at the specified path, you must create it manually. To do this, go to the parent section Control, right-click on it and select – Create – Section. Give it a name – StorageDevicePolicies.

3) Go to the StorageDevicePolicies section we created and right-click in the right area of ​​the registry. Select the menu item - New - DWORD value (32 bits). We call it an arbitrary name, for example, WriteProtect.

4) Now we just have to make sure that the value of the WriteProtect parameter is 0. To do this, double-click on this parameter with the mouse or right-click on WriteProtect and select the menu item - Change.

Important! If the value in this parameter is set to 1, then change it to 0 and click OK.

5) Close the registry editor window, remove our flash drive from the device, and reboot it. After the reboot, insert the flash drive and check whether files can be written to it.

Removing protection from a flash drive via Diskpart

If the option to remove protection using the registry did not work, let's try this operation through the command line interface.

To do this:

1) Press the Start button, enter the command diskpart, then right-click on the icon that appears and select the item – Run as administrator.

2) In the window that appears, enter the command – list disk and press the Enter key. A list of drives will appear in front of us, in which we need to determine the serial number of your flash drive.

This is easy to do using the size of your flash drive. For example, my flash drive is 8 GB in size, so I can easily identify it in the list of media. If you don’t know the size of your flash drive, then double-click on the My Computer icon (usually located on the desktop) and see what size your flash drive is (RMB - Properties).

After you have selected the desired media, enter the command select disk your media number(I have this 1). Press Enter and a message with the selected disk should appear.

3) Enter the command - attributes disk clear readonly, which clears the read-only attributes for the flash drive and removes write protection from it.

Press Enter and if everything is done correctly, the message “Disk attributes successfully cleared” will appear in front of you.

Close the diskpart utility window.

Removing protection using the Local Group Policy Editor

Sometimes there are cases where the write ban is enabled through the Group Policy Editor in the OS itself. Let's check it out:

1) Click the Start button and enter the command gpedit.msc in the search bar, then press the Enter button.

2) In the window that appears, follow the path: Computer Configuration - Administrative Templates - System - Access to removable storage devices and in the right area of ​​the window select the item - Removable drives: Deny writing.

At this point, we pay attention to the condition that appears next to the inscription. If the status is set to Enabled, then double-click on it and select Disable in the new window. Click Apply and OK.

List of programs for removing protection from a flash drive

HP USB Disk Storage Format Tool– a universal program that fits almost any flash drive and allows you to quickly remove protection. program, run the exe file (this program does not require installation) which is located in the archive and the program itself will detect your flash drive. After that, you need to select the type of file system into which the program will format and click the Start button.

JetFlash Recovery Tool - this program is only suitable for flash drives from the following manufacturers: JetFlash, A-DATA and Transcend. program, carry out a simple installation, and after launching it, press the Start button.

Apacer Repair – this program only works with Apacer flash drives. If you have just such a flash drive, then in order to remove the program from the flash drive, simply launch it and follow the instructions on the screen.

AlcorMP is one of the best programs for carrying out such actions. It works with AlcorMP controllers. archive, unpack it and run the file AlcorMP.exe from the folder itself. If your flash drive works on an AlcorMP controller, then the inscription in line G will be black and this means that everything is in order and you can work. If the inscription is red, then working with this flash drive is impossible. In order to remove write protection from a flash drive, simply press the Start button (A) after setting the switch to Russian.

An important nuance. All programs for working with flash drives must be run with administrator rights. To do this, right-click on the program launch shortcut or on the program itself and from the context menu select – Run as administrator.

A couple of points. Before using the above programs, I recommend carrying out preliminary steps and if they do not help, only then resort to the help of software. What is this connected with? If you use software, all your files will be deleted as the flash drive is formatted. To prevent this from happening, use the methods below, and if they do not help, then you can already start working with the programs.

1) If your flash drive is infected with viruses (suspicious files on it), then scan it and remove all viruses found.

2) There are times when it is enough to change the USB port and the data from the flash drive can be read perfectly.

3) Be sure to check for a security switch on the flash drive. If it is in “Lock” mode, then move it to the other side.

That's all the advice that I wanted to give you on the topic of how to remove write protection from a flash drive. I hope this article will help you in solving this problem.

That's all for me. See you again!!!

Writing files to a removable storage device is the simplest operation on a personal computer, which millions of users perform every day. But not all users understand the true reasons for such an error. In this article we will look at the causes of the error and how to resolve it.

Causes of the “Disk is write-protected” error. Why is the microsd card write protected?

The verbatim text of the notification looks like this: “The disc is write protected. You need to remove the protection or use a different drive." The appearance of this message is quite logical if the operating system does not have the ability to write to the disk - for one of the reasons it is prohibited.

The causes of failures may be software or hardware. Software and hardware failures occur both in the computer OS and in the file system of the drive. But before deciding what to do, you need to understand the reasons for this phenomenon.

Basic ways to protect a flash drive (memory card) or disk from being written to

Methods for protecting information on a flash drive, as well as types of failures, can be divided into two groups: hardware and system.
One of the options for hardware protection is a mechanical switch on the drive body in the “lock” position.

System protection is a set of programs and utilities specifically designed to ensure data security. For example, a block is set in the Windows registry or a group policy prohibits writing.

The easiest way to remove protection from a flash drive is Total commander

Total Commander is one of the oldest Windows managers, but is still popular among users because it has good functionality and is easy to use. You can remove protection in TC using the following algorithm:

• Open "Configuration".
• Open the “File Operations” tab.
• Select "automatic copy method".

Hardware method. Windows Command Line – Diskpart

Important: You must run the command line as an administrator.

To remove protection using the command line, you need to follow the following algorithm:

1. Go to the Start menu.
2. Find the “Command Prompt” application (the command line can also be launched using the Win + R key combination).
3. Enter Diskpart into the command and press the “Enter” key at the command line, thereby launching the disk manager application on the system.
4. Enter Attributes disk clear readonly into the command and press the “Enter” key, thereby disabling the read-only mode.
5. Enter Clean in the command and press the “Enter” key, thereby deleting all partitions and volumes of the disk.
6. Enter Create Partition Primary in the command and press the “Enter” key, thereby creating the primary disk partition from scratch.

The ability to write to a flash drive is often blocked by numerous malicious programs that enter the computer system through other external media connected to the device or the Internet.

To find and eliminate them, you need to download an antivirus, for example Dr.Web CureIt, and scan the system for malicious code.

Mechanical protection. Switch for recording modes on a flash card

Some flash drives are equipped with special write protection mechanisms. They are located on the device body, on the outside. The device looks like a small switch.

Important: These switches are more common on SD cards, but some USB models also have them.

To activate the ability to write to a disc, just move the switch slider to the desired “OnLock” position.

Windows Tools. Setting up Group Policy (gpedit.msc)

How do I remove protections that have been installed as a result of Local Group Policy settings? This restriction is removed using the following algorithm of actions:

1. Activate Windows keys + R command prompt.
2. Enter the command Gredit.msc in the search bar and click OK.
3. In the new window, go to the tabs: Configuration>Administrative Templates>System>Access to removable storage devices.
4. Go to the “Disable reading” line.
5. Double-click on the line.
6. In the new window, activate “Apply”>OK.

Registry editor. Removing write protection using regedit

Registry Editor is a standard program built into a modern Windows system. The application edits registry keys, sets new default settings, and restores files from backup copies.

To remove protection using the editor, you need to follow the following algorithm:

1. Log in to the registry editor program by activating the Win+R keys.
2. Type Redegit in the search bar and click OK.
3. Find one of the registry branches called: HKey Local Machine
4. Select the System branch from the drop-down list.
5. From the list that drops down under this branch, select Current Control Set, then Control
6. From the list of subsections, select StorageDevicePolicies
7. In the program interface, check the WhiteProtect parameter
8. Change the parameter value from 1 to 0.
9. Close the editor and reboot the OS.

What to do if the disk is write-protected and the flash drive cannot be formatted - Low-level formatting

If the above attempts to remove protection do not bring results, then you should use the method of low-level formatting of the drive to clear and re-create all tables of the file system of the flash card. At the same time, you need to remember that in this case the recorded data will be lost, but the damaged disk memory will be restored. Full formatting will block damaged USB areas and the system will not be able to write data to them in the future.

The Low Level Format Tool program is suitable for this operation. The application clears the partition table, boot sectors, and even manufacturer data - all down to the last byte. A free version of the program is available on the Internet, but it works slower than its paid counterpart.

Not typical causes of the “Disk is write-protected” error

The reasons why writing to a disk is blocked can be divided into common and atypical, more rare ones. The second group includes file system errors, wear or physical damage to the flash drive, microcontroller failures, and USB port malfunctions.

— Fatal errors in the file system of the flash card
If the sequence of storing and naming information in the drive's memory is violated, the structure of the file system is damaged. Logical errors occur after incorrect removal of the flash drive from the connector, memory wear, power surges and other processes. The disk is blocked, and the system reports the need to format it. To correct the situation you need:

• Try to recover data using software suitable for this media.
• Perform a high-level format with file system recovery.

Physical damage to the media includes manufacturing defects, cracks, and overheating in motherboards and microcircuits. Physical damage is also caused by violations of operating and storage conditions, power surges, and loosening of USB connectors.

— Microcontroller failures or complete wear of the flash drive
Flash memory and the computer “communicate” with each other using a controller chip built into the external drive. The controller is controlled by a microprogram written into the chip. Sometimes, in case of unsafe removal of the flash drive or electrical current surges, a software failure of the controller occurs. A clear sign of such a malfunction: write blocking. Also, blocking occurs due to wear of the memory chip, exceeding the threshold of rewrite cycles. The system goes into information protection mode to stop the process of memory destruction. Flashing the microcontroller using special programs will help eliminate failures.

It is rare for a USB port to turn off spontaneously on a computer, but this error still happens. To check if the port is working properly, you must first try connecting other devices to it. If the port sees the smartphone, keyboard and other devices unstable or completely refuses to notice them, then it does not function. If the user sees a system message about the disk being write protected, it is not related to a malfunction of the USB ports. But the administrator can disable them intentionally to protect data from downloading. How to remove write protection from a flash drive if the port is disabled?
In this case, you need to enable USB using the following procedure:

1. Enter the BIOS by holding down the F2 or F10 keys.
2. Find values ​​for USB Controller.
3. Set the Enabled parameter for these values.
4. Confirm the changes by activating the F10 key.
5. Restart your PC.

How to remove protection from excel sheet

If the Excel sheet is not editable, the application toolbar is inactive, and the user does not have access to most functions. When you try to make changes, the program will display a message stating that the sheet is protected. To unlock the sheet, you will need the following steps:

1. Click on the “File” item.
2. Activating the “Unprotect” link in a new window.
3. Enter your password. Without knowing the password, you cannot remove the protection.

In the old version of Excel, to remove the lock you need to:

1. Activate the “Service” item.
2. Select the “Protection” tab from the list.
3. Activate the “Unprotect Sheet” command.
4. Enter your password.

Programs for eliminating recording errors and formatting protected flash drives

Flash drive manufacturers understand that their products may malfunction for various reasons, so every well-known brand creates utilities to eliminate them. Useful programs are available on the manufacturers' websites. For example, the program for Kingston is called Kingston Format Utility, Transcend is called JetFlash Recovery. The programs are freely available on the manufacturers' websites.

The era of floppy disks is long gone, but sometimes when trying to write to a flash drive, the user may encounter a situation known since the days of using floppy media - it is blocked and cannot be used.

We will look at how to solve this problem in detail in our article today.

So, you need to write some information to a flash drive, you insert it and receive a message like “The disk is write-protected, remove the protection or use another one.”

This problem can be solved quite quickly, and we will talk about this a little later, but now we should say a few words about the purpose of installing protection from downloading on .

Pay attention! This operation is performed for only one purpose - which can spontaneously be copied to removable media without the user’s knowledge.

Methods for removing write protection from a flash drive

There are 2 key ways to remove protection from a flash drive: hardware and software.

The hardware solution is to install a lock switch, which is present in some drive models, as well as SD cards.

Most often, the toggle switch is located on the side edge of the drive.

Carefully inspect your existing drive and look for an open/closed lock icon or the word Lock on it.

Pay attention! Removing the lock is very simple - just move the lock lever in the opposite direction. That's it. Insert the media into the appropriate slot and repeat the file writing operation again.

The software solution involves the interaction of a flash drive controller, which is responsible for the ability to record information.

You can remove write protection using this method using the command line of the Registry Editor or Local Group Policy.

Learn more about all of the above methods.

Removing protection using regedit

1. Click “Start” and enter - in the search field. Right-click (RMB) on the program and in the context menu go to the “Run as administrator” item.

2. Go to the StorageDevicePolicies section:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies

Important! Important! If there is no such thing, you will have to create it. To do this, click on the section Control - New - Section. We call it “StorageDevicePolicies” without quotes. If there is no such section, you need to create it.

Create (RMB in the right column of the registry) a DWORD parameter (32 bits) in the created branch. For convenience, let's call the element WriteProtect.

3. Make sure that the WriteProtect value is 0. Right-click on WriteProtect and select “Change”. If the value is “1” you need to change it to “0” and click “Ok”.

4. Close the registry editor, remove the media and restart the computer. Insert the flash drive. Now the flash drive works as usual, allowing you to write files.

Removing protection using Diskpart

If we were unable to unlock using regedit, let's try to do it using the Diskpart command interpreter, which allows you to manage the commands that the user enters into the command line when working with partitions and disks.

1. “Start”, enter the name - cmd - in the search field. Right-click in the program and select “Run as administrator” in the context menu.

2. Now you should enter the commands: diskpart and list disk, and after entering each of them, press the Enter key.

3. In the list above, determine what serial number in the name the flash drive has.

This can be done based on the specified size, in our case an 8 GB flash drive, presented in the table as “Disk 1” with a capacity of 7441 MB.

4. Select the disk with the “select” command, clear the attributes that allow only reading “attributes disk clear readonly”.

If, you should enter the following commands: “clean”, create a partition “create partition primary”, format it in NTFS “format fs = ntfs” or FAT “format fs = fat”.

Removing protection using the Local Group Policy Editor

1. Open it by pressing the Win + R key combination, after which you should enter the command gpedit.msc and press “OK” or Enter.