Which disk to burn windows 7 on. Burning the installation disk with a standard windows tool

In order to install operating system Windows itself on a computer or laptop today, disks are most often used. I bought a disc with Windows, or I burned it myself to an empty disc, as we will learn to do in this lesson. And then installed or reinstalled the system. Also, today it is not uncommon for users to install the system from a simple USB flash drive. Although, frankly speaking, it is worth saying that even from a memory card you can safely install Windows.

Why in Lately Has the option of installing the system from a USB flash drive spread? And this is due to the fact that modern laptops, which are thin and light, they are also called ultrabooks, there is no built-in drive. So you have to somehow get out and memory cards. But today we are not talking about that. In this article I want to tell you how very simply you can write downWindows to disk so that you can later install this system on any computer that has a disk drive.

And to burn Windows to disk, you need to follow a few simple steps.

1. Buy a blank.

2. Get the Windows image.

3. Burn the image in Discs Studio.

These simple steps I will describe in more detail for those who like to disassemble everything to the smallest detail.

1. Go to any computer store and buy empty disk(blank) to 4.7 gigabytes. I buy mostly blanks from Verbatim. They have average price. But I would not recommend taking the cheapest ones, very often they turn out to be defective.

2. Usually, a Windows image is written to the disk. Your task is to acquire this image. Most often, such an image is in ISO format. It doesn’t matter if you download Windu from the Internet or a friend brings it to you on a flash drive, the main thing is that you have a Windows image in ISO format or another, such as MDF or MDS.

3. And now we need to write the Windows image to an empty disk. These are not ordinary files that are thrown onto a disc and simply “stupidly” written to disk after pressing the “Record” button in the Nero program and the like.

Here the approach is slightly different. We need to write the image correctly using special software. There are a great many programs for recording images, one of these is called Discs Studio, and we will use it.

Download this program and install. Then we will need to run it, and do a few simple steps to record Windows image to disk. But before that, do not forget to insert a disc (blank disc) into the drive.

This is what Discs Studio looks like after the first launch.

We need to go to the "Action" menu and select " Burn image".

In the window that opens, click the button with the ellipsis.

And specify the location on the computer where the Windows image file is located.

Then specify the recording speed, preferably the minimum, and click the " Burn».

At the bottom of the program, we can observe the process of recording the image. Upon completion of the operation, we will receive a corresponding notification in the program, and the drive will be automatically removed from the computer.

This is my instruction for Windows entries the disk is coming to an end, I hope my lesson was useful to you.

See you in other tutorials and articles.

Hello.

Quite often, when installing Windows, you have to resort to boot disks (although, it would seem, recently bootable flash drives have been increasingly used to install).

A disk may be needed, for example, if your PC does not support installation from a USB flash drive or when this method Errors are pouring in and the OS is not installed.

Also, the disk can be useful for Windows recovery when it refuses to load. If there is no second PC on which to record boot disk or a flash drive, then it is better to prepare it in advance so that the disk is always at hand!

So, on to the topic...

What is needed disk

This is the first question novice users ask. The most popular discs for burning OS:

1. CD-R is a disposable CD with a capacity of 702 MB. Suitable for recording Windows: 98, ME, 2000, XP;
2. CD-RW is a reusable disc. You can burn the same operating systems as on CD-R;
3. DVD-R is a 4.3 GB disposable disc. Suitable for recording Windows OS: 7, 8, 8.1, 10;
4. DVD-RW is a reusable disc for recording. You can burn the same operating systems as on DVD-R.

The disk is usually chosen depending on which OS will be installed. Disposable or reusable disk - it does not matter, it should be noted only that the write speed on a disposable disk is several times higher. On the other hand, how often do you need to burn the OS? Once a year...

By the way, the recommendations above are given for original images Windows OS. In addition to them, there are all kinds of assemblies on the network, in which their developers include hundreds of programs. Sometimes such collections will not fit on every DVD disc ...

Method number 1 - recording a boot disk in UltraISO

In my opinion one of the best programs to work with ISO image mi is UltraISO. And the ISO image is the most popular format for distribution. boot images with Windows. Therefore, the choice of this program is quite logical.

To burn a disc in UltraISO, you need:

1) Open the ISO image. To do this, run the program and in the "File" menu, click the "Open" button (or a combination of buttons Ctrl + O). See fig. one.

Rice. 2. Burning the image to disk

3) Then you need to choose:

• - recording speed (it is recommended not to set it to maximum value to avoid writing errors);
• - drive (relevant if you have several of them, if you have one, then it will be selected automatically);
• - an ISO image file (you need to choose if you want to burn another image, not the one that was opened).

Rice. 3. Recording settings

Method number 2 - using CloneCD

Very simple and handy program for working with images (including protected ones). By the way, despite its name, this program can also burn DVD images.

CloneCD

Official site: http://www.slysoft.com/en/clonecd.html

To get started, you must have an image with Windows format ISO or CCD. Next, you launch CloneCD, and from the four tabs select " Burning a CD from an existing image file«.

Rice. 4. CloneCD. The first tab is to create an image, the second is to burn it to disk, the third is to copy the disk (a rarely used option), and the last is to erase the disk. We choose the second one!

Specify the location of our image file.

Then we indicate the CD-Rom from which the recording will be carried out. After that we press write down and wait for about a minute. 10-15…

Method number 3 - burning a disc in Nero Express

Nero Express- one of the most famous programs for burning discs. To date, its popularity, of course, has subsided (but this is due to the fact that the popularity of CD / DVDs has subsided in general).

Allows you to quickly burn, erase, create an image from any CD and DVD discs. One of the best programs of its kind!

After starting, select the tab " work with images", then" write the image ". By the way, hallmark program is that it supports much more formats images than CloneCD, however, extra options are not always relevant ...

This article will be filled useful information concerning how to burn the image of any operating Windows systems to disk. This is possible in many ways, but I prefer to do it with special program UltraISO. My choice is not accidental, as this is a simple and convenient program that allows you to burn discs with any information. If there is no desire to clog up the computer's memory various programs, then the standard tools of Windows 7-8 will help to burn the Windows image (in the version Windows Vista also has this function.
When creating a disk image, it is important to remember that this process slightly different from regular recording disk with information (music, movies, text files). After all, you need to create a special boot disk that will be recognized by the computer during startup.
When downloading the operating system Windows, Windows Vista or any other from the Internet, it looks like a regular file with the extension iso. Many users have recorded this finished file to disk, but noticed that loading from installation disk does not start when the computer is started. This is due to the fact that in

Next, I will tell you how to capture an operating system image with iso extension to disk so that when you start your computer, installation from the disk starts. Further, from such an installation disk, you can reinstall the system on any computer.

Before directly creating an image for recording, you should mention the size of the future Windows image. If for old Windows versions(XP and below) an ordinary blank CD or CD-RW was enough, since the image occupied no more than 700 megabytes, then for Windows 7, 8, Windows Vista you will need a DVD. Although for some versions of Windows XP, 700 megabytes is not always enough, as there are different variants assemblies with different additional programs, useful utilities etc. An image of newer systems (Windows 7, Vista or Windows 8) takes at least three gigabytes.

Burn Windows iso image to DVD using UltraISO

To start burning a disc with an image of the selected operating system, open the image with a mouse click. On the screen it looks like this:

Burning an installation disk with a standard Windows tool

In a previous article, I addressed the issue of installing Windows 7. Several points were touched on where to get Windows distribution 7. One of the options involved downloading an operating system image from the Internet. In this article, I will tell you in more detail how to write the downloaded image to DVD disc, while using various applications. Along the way, we will touch on some of the nuances of recording for Windows 10.

To create a bootable disk with the Windows 7 or 8 or 10 operating system, we need a DVD-R or DVD-RW disc, a windows image and a computer or laptop with a burner. Earlier, we considered recording an image using the program BurnAware Free . You can get acquainted.

First, let's describe general rules recordings that will be no different for almost any recording software. These rules are typical for burning not only windows images, but also for burning any data to DVD, CD or BR discs:

• To burn a Windows image, try not to skimp on the DVD. Let it be not a top-end disc in terms of cost, but also not a disk minimum cost. quality disc will allow you to install the operating system many more times, of course, with proper storage of the disk.
• The disc burning speed should be the minimum for your drive and for the specific DVD. How less speed recording, the more likely it is to write without failure.
• At the time of recording, it is desirable to equip the computer with a source uninterruptible power supply- UPS, in order to minimize the risk of spoiling the disk blank during power surges or power outages.

Itself common mistake user - write the image file to disk as regular file with data. Such a disk is not bootable and you will not be able to install the Windows 7 operating system from it. The principle of writing an image to a disk implies "unpacking installation files system to a blank DVD media".

ISO Image and UltraISO

This application is very popular not only for burning discs, but also for burning bootable images to flash drives. In addition, UltraISO has the ability to create virtual drive, in which you can mount the disk image. We will talk about all the possibilities of this program another time. Keep for updates.

The first launch after installing the program is accompanied by information window disclaimer of warranties. Agree by clicking the button Everything is fine.

CloneCD first run

CloneCD then informs you that it is not free and you have 21 days to try it out. Well, we don't need more. We close the message and the main window of the program appears in front of us, in which we select the second button from the left CD burning.

Image capture selection

Selecting an image file

Information about the image file

In the next step, select the write speed and click OK.

Recording speed selection

After the recording is completed, you can proceed to install the operating system.

Image of MDF/MDS and Alcohol 120%

Another no less popular program for recording images Alcohol 120%. As in the case of UltraISO, she can do a lot, but her main advantage is working with images like MDF/MDS.

To install, go to the official website of the application, download and install the program. You can also download .

We launch the application and wait for the end of the countdown, press OK.

Alcohol 120% - first launch

Burning a disk image

Then select the image file in the dialog box by pressing the button Overview.

Selecting an image file

In the next window, set the recording speed, the recording method leaves DAO and press Start.

Selecting the recording speed and method

After the end of the recording, we go to install the operating system on the computer.

Image of NRG and Nero Burning ROM

Perhaps the most famous among the presented programs is the Nero program. Burning ROM. Download it from the official website of the developers and install it.

The first launch, as in the case of any trial program, is accompanied by familiarization with information about purchasing the program or launching trial version. Choose Proceed.

Nero Burning ROM - first run

Cancel - new project

The next step is to go to the menu and select Recorder - Record Image...

Write image

Further in the standard dialog Windows window select our file with the image of the operating system and click Open. Then in the next window set the Recording speed, Recording method and press the button Burn.

Project recording

After pressing the button Burn The process of burning the Windows image to disk will begin.

Media Creation Tool for Windows 10

Exists simple opportunity burning a Windows 10 image to disk. To do this, you need to download the utility from microsoft.com and use it. Follow the link, download and run. In the first window, accept the licensing terms and proceed to the first step of the wizard by selecting the second option Create installation media for another computer and press Further.

Create installation media for another computer

Next, a choice of language, architecture and edition is offered, which can be changed by clicking the checkmark Use the recommended settings for this computer. This means that the image will be written in accordance with the capabilities of the computer on which the utility was launched. If you need to change these parameters, then uncheck the box and change it to your liking.

Selecting System Options

At the next step, in the standard Windows dialog box, specify the path where the utility will download the image file of the Windows 10 operating system from the Internet and click Further. The download process begins, which, depending on the speed of your Internet connection, can take from 5 minutes to 2 or 3 hours. Immediately after this, the creation will begin Windows media 10, which also takes long time. Be patient.

Download and create Windows 10 media

At the end of the recording of the Windows 10 image, you just have to insert the disc into the writing DVD drive and press Open DVD burner.

Finish preparing the Windows 10 image

We burn windows to disk using a standard tool

With moments exit Windows 7, users are offered the ability to burn an ISO image, including an image of the Windows operating system, to a disc without using third party programs. To do this, in the operating system Windows 7, 8, 10, click right click mice by ISO image file with the Windows distribution and choose Burn disc image.

Selecting an image file

Image recording

After the burning process is completed, you will receive a bootable file ready for use. Windows disk 10.

If you have a Windows operating system file in ISO format, then creating a bootable disk is not difficult. Many users just drop ISO files on the optical disc, after which they do not understand why Windows does not start automatically in BIOS. The thing is that the image must be written correctly. Starting with Windows Vista Microsoft company introduced the opportunity to work with ISO format without additional software, however, to create such a file, you'd better turn to programs with fine tuning image. You will see the intricacies of creating a disk from Windows 7 and the burning process in this article.

Create an image to burn Windows 7 to disk

First, you need to convert all the files for installing Windows 7 to a disk image. Only then the resulting file is written to a CD or DVD.

The most popular programs for ISO creation are Daemon Tools And Ultra ISO. The principle of their operation is as follows: all the files that you need to convert are taken and converted into a kind of archive that imitates the assembled installation disk. Unfortunately, it is not yet possible to create an ISO using the built-in Windows tools. Therefore, install one of the suggested programs on your computer.

• Go to the official website of the Daemon Tools developer at https://www.daemon-tools.cc and select the Daemon tab Tools Lite 10 as it is the most simple utility. If you need more options than just burning a boot disk, then refer to other tabs. This software paid, however, you are given a demo version for a trial period.

• As soon as you download the installation file to your computer, proceed to unpack and install the program directly: it will take quite a bit of time, just follow the instructions on the screen.
• Open the software and select the "New Image" tab.

• Click on the "Create Data Image" link.

• You will be in the window for creating an ISO image. Click on the plus sign to the right upper corner windows to select your Windows 7 distribution.

• Specify the location of the installation files. After that click "Open".

• You will see the distribution at the top of the window. In the "Format" line, set the value to "ISO" and click on the "Start" button.
  Creating an image takes a couple of minutes, depending on the size of the file.

Once the procedure is over, your file will be on your desktop and you will be ready to start burning it.

How to Burn Windows 7 to a Boot Disk

You now have two recording options:

• Using Daemon Tools Lite.
• Built-in Windows software.

How exactly to do this is entirely your decision, however, it is worth noting that recording with built-in programs is much easier and faster, and with Daemon Tools it is more functional. Look at both entries.

How to Burn Windows 7 to a Bootable Disk Using Daemon Tools

• Go to the "Burn discs" tab in the program.

• You can select the "Burn Image to Disc" or "Quick Mount" tab.

• Click on the three dots next to the first line. This will allow you to add the ISO.

• Specify the location folder of the resulting ISO image with the operating system.

It remains to specify the following data:

• In the second line, put the drive, which is your DVD drive.
• Check the box next to the word "Finalize".
• Click "Start".

Make sure your disc is inserted, otherwise the settings will fail.

Within a few minutes, the image will be written to disk. When launched in BIOS, such a file will open as an installation file.

How to burn Windows 7 to a boot disk using system tools

The built-in utility will allow you to easily burn ISO to disk, but make any Extra options you can not.

• Click on Windows image 7 with the right mouse button.
• Select the line "Open with".
• Look for "Image Burner" Windows drives” and click on it.

• You just need to specify the drive and check the box next to the words “Check disc after burning”.
  Click "Record" and wait a few minutes.

Now you know what to create ISO system and writing this file to disk is not difficult at all. If you are unable to install the Daemon Tools program, try turning to UltraISO, or simply download the operating system already in this format. Most Windows 7 discs are written this way.