Why can't I sync my iPad with iTunes? IPhone or iPad won't sync with your computer? There is a solution

Sync iPhone and iPad without iTunes

Do you lack time to deal with the problem of synchronizing your iPhone or iPad with your computer?

We will do it for you! Phone ‹ 495 › 22 66 298.

There is another solution!

• After check-out, you will learn an alternative method of data transfer from computer to iPhone or iPad.
• You will see an easy way to synchronize your device with your computer.

If you decide to solve the problem yourself, refer to our article!

This article lists possible causes of iPhone and iPad problems syncing with your iTunes.

Often users encounter problems related to synchronizing iPhone or iPad with iTunes. The essence of the appeal is that the program, when synchronized with an iPhone or iPad, displays a message"i Phone, iPad could not be synchronized because the synchronization session could not be started" This table message often appears when upgrading to a new version of iOS 5 or higher software. The user has no choice but to search for information about the device synchronization problem on the Internet.

Setting up iPhone and iPad from RUB 400.

Instruction No. 1. Common case:

1. The first thing you need to do is disconnect your iPhone or iPad from your computer, restart it, connect it back and repeat synchronization. If the message box “iPhone, iPad could not be synced because the sync session could not be started” appears again, proceed to the following steps.
2. Try updating iTunes. It happens that after updating the program, this message disappears.
3. Your antivirus may be interfering with the synchronization process. Try disabling all security programs.

If all these steps do not help, you should pay attention to the iTunes program itself. Perhaps it was there that some kind of failure occurred. You should force close iTunes. You can do it like this:

Instruction No. 2. Rare case:

• Go to the Start menu -> All Programs -> Accessories. Select the “Command Prompt” menu bar, right-click on it and select “run as administrator” from the drop-down menu.
• In the window that opens, enter the following command without quotes “netsh winsock reset”, then press “Enter”.
• After this, restart your computer and repeat the synchronization.

Sometimes you may encounter the message " I cannot back up my iPhone (iPad) because... The backup session failed" The message may be caused by a large number of backup copies stored on the hard drive in the system partition. To solve this problem, read our article “

Even Apple technology cannot boast of perfect stability. There is always a risk of a problem occurring. These include the situation when the iPhone cannot be synced in iTunes. First, let's look at its causes, and then consider the most effective ways to eliminate them.

Possible problems

The first thing an iPhone owner may encounter is problems with the cable. Also, difficulties sometimes arise due to the use of an outdated version of the program or the freezing of a special service. The last thing is problems with the device itself.

Situation 1: Cable problems

The reason why the iPhone does not sync with iTunes may be problems with the cable. Many owners of Apple mobile devices note that the original cord quickly breaks down and becomes only suitable for charging. In this case, the best solution would be to connect via Wi-Fi.

Situation 2: Outdated version of the program

iTunes updates are released regularly. The developer himself highly recommends using only the latest version of the program. It should be the most stable and functional. Accordingly, when using outdated software, various difficulties often arise. This also applies to connection problems.

Updating iTunes is the most logical way out of this situation. Everything is done in the program itself, you don’t even need to go to its website. This usually happens automatically, but the function can be called manually.

Situation 3: Special service failure

Another reason why iTunes does not sync the iPhone may be a failure of a special service. In this case, you need to restart it. This is done as follows:

Situation 4: Problems with the smartphone

If the steps described above did not help, then the problem most likely lies in the iPhone itself. Try turning it off and on. In some cases it will be impossible to do this, then you should use Hard Reset. The function is called as follows:

• For iPhone 7 and older, you need to simultaneously press the volume down button and the lock button and hold them down for ten seconds.
• For younger models - Home button and volume down.

When the Apple logo appears on the device screen, you can release the buttons. Another situation why the iPhone does not sync with iTunes can be related to the device’s firmware. It is recommended to update your smartphone to iOS 11. In this case, connecting to your computer should proceed without any difficulties.

iTunes often crashes and may slow down or simply freeze during operation. Perhaps the most common problem among iOS device owners is the inability to sync their iPhone with iTunes. There may be several reasons for this. In this article, we will try to answer the main question of why the iPhone does not sync with iTunes and how to fix this problem. Below are several ways to resolve this error.

Why iPhone/iPad won't sync with iTunes

If you are unable to sync your iPhone 7/7 Plus/6s/6s Plus/6/5s/5, iPad or iPod with iTunes, you can use one of the suggested solutions:

1.Updating iPhone and iTunes

Using an outdated version of iOS or iTunes is the most common reason why iPhone and iTunes won't sync. In this case, you need to check the software version.

In iTunes on Mac, go to: Apple > Software Update.
In iTunes on Windows, go to: Help > Check for Updates.
If there are updates available, install them and try synchronizing again.

In the Settings - General - Software Update application on your iPhone, you can also check which software version is installed on your device. The latest software must be installed. If you are unable to install the new firmware, make a backup copy via iTunes or iCloud, and then perform a full device restore.

2. Hardware problems

The inability to sync iPhone with iTunes can also be caused by hardware problems: for example, you may be using an unusable USB cable. Try using a new wire and also check all the ports on your computer.

3. Synchronization settings

There is a chance that your iPhone is not syncing with iTunes because syncing is simply not configured in the installed version of the media combiner. In this case, you need to connect your iPhone to your computer, and then select your model in the Devices section of iTunes to change your iPhone settings and configure synchronization settings. Once set up, re-sync your iPhone.

4. Installing Apple Mobile Device

Not everyone knows about this, so be sure to check this point. It is important that Apple Mobile Device support is installed on your computer. To check for its presence, do the following:

On Windows 7: Click Start > Control Panel and Uninstall a program. Make sure Apple Mobile Device support is listed in the list that opens.
On Windows 8/10: Search for “Control Panel” and press “Return”. Make sure your Apple Mobile Device is listed.

5. Conflict with other programs

It happens that iTunes conflicts with other installed programs on Windows. In this case, you just need to temporarily remove third-party utilities, and then try syncing your iPhone with iTunes again.

6. Tenorshare TunesCare Program

If you yourself cannot find the reason why your iPhone does not sync with iTunes, then use a convenient program that will automatically find and eliminate the causes of this problem. Below is how to use the professional tool:

Download the program from the official website, install it on your computer and you can launch it immediately.

Connect your iPhone to your computer using a USB cable.
The program will automatically detect your device. Next, click on the “Fix iTunes Sync Problems” button. The program will begin restoring damaged iTunes libraries.

Once the process is complete, simply launch iTunes again and your iPhone will sync without issue.

How to sync music/videos/photos on iPhone without iTunes?

If it so happens that the problem with synchronizing iPhone and iTunes has not been resolved, you can use an alternative solution - the program.

Tenorshare iCareFone is an excellent alternative to iTunes with advanced features, including:

• import and export data between iOS device and computer (photos, videos, contacts, notes, bookmarks, audio and other types of data)
• data backup and recovery function
• cleaning up garbage on an iOS device to improve performance
• solving various iOS errors by entering and exiting recovery mode, etc.

You just need to download the program from the official website, install it and run it.

Your iPhone must be connected using a USB cable to your computer. Next, in the “Backup and Restore” section, select the required data type and what needs to be done. Everything is very simple and fast.

The backup time depends on the data size of your device as well as the speed of your network connection.

Please note that the program can be used on both Mac and Windows.

Everyone knows that iTunes gives users the opportunity to enjoy their favorite music hits without borders 24 hours a day. But, like any other system in our lives, errors and malfunctions often occur. And, it would seem, the problem of lack of synchronization of iTunes with an iPhone, iPad, or iPod Touch should be solved promptly and almost in 2 minutes - but no, sometimes even service center specialists spend hours racking their brains over this problem, simply because they have dealt with it before have not encountered.

But now everything will be just great, and to successfully synchronize iTunes with an iPhone, iPad, or iPod Touch, you will not need to obtain special knowledge or take your device to the service center closest to your home, paying a lot of money to would-be masters. Everything will be fast and very simple... if only you use the step-by-step instructions that we will now provide you with.

So, you connect your iPhone to your computer, but the device doesn’t want to be recognized. The main reasons for this may be a malfunction of the device itself or incorrect operation of the software. Let's look at a few of the main reasons why iTunes may not sync with your iPhone, iPad, or iPod Touch.

Here are just the most important possible reasons:

• Incompatibility of the device with the USB port, its failure
• Using a broken or non-original USB cable
• Incorrect functioning of the iPhone
• Difficulties encountered with the software or with the operation of the Apple Mobile Device

Diagnose device and USB port compatibility

iPhone connects to USB port, but nothing happens? This means that one of the possible reasons is the device’s incompatibility with the port, or its failure. To check how it works, you just need to insert any flash drive into USB, and if everything is in order, the device is functioning, you should reconnect the IPhone to a different port. It is better if this port is located at the back of the PC. Use USB 3.0 or higher to ensure everything works like a charm.

Are there any positive changes when reconnecting? We are moving on to the next diagnostic stage.

Checking the correct operation of the cable

Connect the cable you are using to the charger. If the iPhone does not charge, the cause of the problem has been found, and it is a broken cable. Replacing it will solve the issue. If charging has started, then you will need to check the iTunes software and Apple device.

Checking the normal operation of the software

First of all, you should make sure that you have all the necessary software installed on your PC. But you should not try to download software from third-party sites that you are not sure about, because this way you expose your computer to the risk of infection. It’s better to take all programs from the official Apple resource, it’s safer. In addition, you will receive only the latest versions of the software, with all updates.

The Apple Mobile Device Service is available on every Windows or MacOS device, so synchronization problems may be caused by problems with this service. If you believe this is the case, the service will need to be restarted.

We reboot the Apple Mobile Device

To reboot, just follow these steps:

1. Apple device disconnects from PC, iTunes closes

2. Go to the management panel, find “Administration”, then open the “Services” tab

3. Look for the name of the service in the list, then click on “Stop”

4. After you are convinced after some time that the service is disabled, you should enable it again

5. Connect your Apple device and wait until the synchronization is successful

If after this there is nothing positive, then the problem is either with the technical part of the smartphone or with iTunes itself. It is worth looking for the folder with the program and uninstalling it. Next, download the latest program update from the Apple website, which will be suitable for your OS. Also update any drivers that are out of date. Well, if after all your actions synchronization still does not happen, and you simply don’t know what to do next, then feel free to go to the service center, the specialists will sort it out. Unless, of course, they are real specialists...

How to Fix iTunes When It Won't Sync with iPhone, iPad, or iPod Touch Video

If you do not enable Google account synchronization on Android, then you can forget about such a convenient feature as accessing contacts from any device with Internet access or creating a backup copy of data.

This article is suitable for all brands that produce phones on Android 10/9/8/7: Samsung, HTC, Lenovo, LG, Sony, ZTE, Huawei, Meizu, Fly, Alcatel, Xiaomi, Nokia and others. We are not responsible for your actions.

Attention! You can ask your question to a specialist at the end of the article.

Reasons why Google and Android synchronization fails

Enable Google synchronization with Android

To understand the synchronization options, you first need to know where to enable this feature.

1. Go to "Settings".
2. Open the “Accounts” section (“Personal data”, “Accounts”).
3. If you don't have a Google account inside, you need to add one. You can create a new account or add data from an existing Google profile - login and password.
4. Click on the added account to open its settings.
5. To enable synchronization, move the switches next to the necessary services - contacts, Google Play Music, Google Fit, Google Photos, etc.
6. To start synchronization right now, call up the additional menu and select “Synchronize” in it.

By default, app data, calendar, and contacts are synced. If you want to automatically synchronize photos with the Google server, you will have to install the Google Photos application. In its settings there is an item “Startup and synchronization”, after activation of which the photos will be sent to cloud storage.

Automatic photo syncing will continue to work even after you delete Google Photos. To disable it, you need to go to the application settings and move the “Startup and synchronization” switch to the inactive position.

Additional manipulations will also be needed to synchronize mail from the Gmail application. In order for data to be sent to the server, you need to check the “Gmail synchronization” checkbox in the client settings. If mail synchronization does not work, clearing the phone's internal memory of unnecessary files (if the storage is full) or deleting Gmail data will help.