How to install beta iOS firmware on iPhone and iPad. How to update beta version of iOS to official (stable)

Today Apple company finally the first public beta version. Unlike traditional beta versions, which are available only to registered developers, public builds of new firmware can be installed by any owner of an iPhone, iPad and iPod touch. The only one prerequisite The only way to install public beta versions is to participate in the Apple Beta Software Testing Program.

Like any test build, the public beta of iOS 11 is unstable and may contain many bugs, so we do not recommend installing it on your main device. If you're ready to start previewing iOS 11, there are a number of steps you'll need to take, including downloading a configuration profile to your iPhone, iPad, or iPod touch, without which you won't be able to access the public beta version of the firmware. Installing public beta iOS versions 11 is a relatively simple process, and in most cases it will take no more than 15-20 minutes. Just follow our step by step instructions.

You perform all actions at your own peril and risk!!! The site administration is not responsible for loss important information and any other data stored on your device!!!

Which devices are compatible with iOS 11

As already, you can’t install iOS 11 on everything iPhone models, iPad or iPod touch. Below is a list of all supported devices:

iPhone 7
iPhone 7 Plus
iPhone 6s
iPhone 6s Plus
iPhone 6
iPhone 6 Plus
iPhone SE
iPhone 5s

iPad Pro 12.9 inch 2nd generation
iPad Pro 12.9 inch 1st generation
iPad Pro 10.5 inches
iPad Pro 9.7 inches
iPad Air 2
iPad Air
iPad 5th generation
iPad mini 4
iPad mini 3
iPad mini 2

iPod touch 6th generation

How to Install iOS 11 Public Beta on iPhone, iPad, and iPod touch

Despite large number steps, installing the iOS 11 public beta is quite simple process, which will not take up much of your time.

1. Using Safari browser Go to this page on the Apple website from your device.

2. If you are not already registered there, click the "Sign Up" button, accepting the Apple Beta Testing Program Agreement.

3. Sign in with your Apple ID.

4. Select the iOS tab.

5. Register your iPhone, iPad or iPod touch for the iOS 11 public beta.

6. Load the configuration profile by clicking the “Load Profile” button.

7. On the profile installation page, click “Install” in the upper right corner.

8. Agree to all the proposed conditions and click “Install” again at the bottom of the page.

9. Click "Restart" to restart your device.

10. After reboot, open the menu “Settings” → “General” → “Software Update”. You will see that an update is available for your device * .

11. Click the "Download and Install" button.

12. Agree to the “Terms of Use”. After this, the process of downloading the public beta version of iOS 11 will begin.

13. Once the download is complete, click “Install Now” to begin installing it.

14. Wait until the installation is complete, after which you can start using the test build of the upcoming operating system for iPhone, iPad and iPod touch.

* If you have previously installed any previous test build on your device, you may have to delete the old profile. You can find it in the “Settings” → “General” → “Profiles” menu.

******************************************

Subscribe to our channel on Telegram to stay up to date with the latest latest news and rumors from the world of Apple and other largest IT companies in the world!
To subscribe to the Newapples channel on Telegram, follow this link from any device on which this messenger is installed and click on the “Join” button at the bottom of the screen.

How to install public beta version of iOS 11 on iPhone and iPad

On Monday, Apple released the first public iOS 11 and now any user can easily install on their iPhone and iPad operating room system from .

This public version is aimed at extensive development and testing of the system with a larger audience iOS users 11. If you are one of those who don't want to wait official release, which will be in the fall, read on and we will tell you what needs to be done to download and install public beta version of iOS11 on your iPhone and iPad today.

What you need to know about iOS 11.

Prior to today's release, Apple released two beta versions for developers. and, in which a number of changes were made and errors in the system were eliminated.

iOS 11 won't support 32-bit apps

Before the presentation of iOS 11, it was known that Apple . Thus, iPhone owners 5c and iPad 4th generation will not be able to update to the latest firmware.

Which devices support iOS 11

iPhone 7/Plus
iPhone 6s/Plus
iPhone6/Plus
iPhone SE
iPhone 5s
Next iPads:
iPad Pro (12.9-inch, 10.5-inch and 9.7-inch)
iPad Air
iPad Air 2
iPad (5th generation)
iPad mini 2/3/4
iPod Touch (6th generation)

Devices support iOS 11

Thus, from the above we understand that our iPhone or iPad is suitable for updating to iOS 11. Now we need to correctly prepare our iPhone and iPad devices for installing the update public version of iOS 11.

Read:

How to get the iOS 11 public beta

To install the public version of iOS you need to do backup all yours existing files on your device via iTunes or iCloud, sign up for the beta iOS testing 11 and start account, well, install iOS 11. Now in detail on each point.

Remember that saving your data is the most important point, before any installations and updates for devices. In case something goes wrong, you can always restore working firmware your device using the data archive. It's better to be safe than sorry.

How to register your account for the iOS 11 open beta

Or. Download ready file iOS 11 (link), from your device. Click “install” and reboot the device.

To install , you need to visit Software Update on your iPhone or iPad.

After rebooting your device, iOS 11 will be installed. To activate it, all that remains is to do the last thing. Click “continue”. In the window that appears, enter your Apple ID and wait a little. Click Start on the list that appears. All! Congratulations! You've done it. Testing new iOS 11 on your device.

This was the iOS 11 installation guide for iPhone devices And . Be sure to share your impressions and the new iOS 11 in the comments.

So, you've already tried the beta version of iOS and now want to install the stable one? Here's how to do it right!

If you installed the developer or public beta version of iOS, you can upgrade to official iOS any time it becomes available. Apple may offer to update your device automatically, but you can manually install the stable version if you want.

Before you start
I write about this in almost every instruction and I will repeat it again: make a backup copy of iPhone before you start. It's worth spending a few minutes saving data rather than regretting it later if something goes wrong.

How to update your iPhone or iPad to the official iOS 12 if you have iOS Beta

How to update to iOS 12 if you have iOS Beta using iTunes

If you have difficulty uninstalling the beta version of iOS 12 following the instructions above. Update your device to stable iOS 12 s using iTunes installed on your computer, it's a little more complicated, but more effective.

After this, the official stable iOS will be installed on your iPhone or iPad.

Note. Make sure you select "Update" and not "Restore". The update will preserve your settings, apps, and data. Restoring will destroy all information on the device (in this case, you must have a recent backup).

Any questions?

Do you still have questions about deleting the beta version of iOS and installing the official one? Leave them in the comments and I will answer them.

Updated September 2018: Updated for iOS 12.

In anticipation of the release of the long-awaited update, it's time to prepare your iPhone, iPad and iPod touch for the transition to the new OS. Unless, of course, you plan to update your device. In this article we will tell you how to check your smartphone or tablet for compatibility with iOS 10, “clean” the device, make a backup and perform other necessary procedures.

1. Check compatibility

iOS 10 is designed for models with processors latest generation. Attempts to make the operating system compatible with older versions of the iPhone and iPad would inevitably cause problems. As a result, it would be necessary to create a separate version of the OS for them, effectively served by outdated hardware.

List of supported iOS 10 devices along with the release of the first beta in June. “Ten” will be able to be installed by all owners of gadgets on which iOS 9 is currently deployed, with the exception of iPhone 4s, iPad mini, iPad 2, iPad 3 and iPod touch 5G.

List of devices supported by iOS 10:

iPhone SE
iPhone 6s Plus
iPhone 6s
iPhone 6 Plus
iPhone 6
iPhone 5s
iPhone 5c
iPhone 5

iPad Pro 12.9
iPad Pro 9.7
iPad Air 2
iPad Air
iPad mini 4
iPad mini 3
iPad mini 2
iPad 4

iPod touch 6G

On the list compatible devices There are no outdated models. As Apple said, owners of smartphones and tablets released in 2011 and 2012, respectively, will not be able to count on updating to iOS 10. At the same time, some of the operating system’s capabilities will not be available on smartphones and Apple tablets previous generations. But overall they will remain part of the updated ecosystem.

2. Have you installed the beta version of iOS 10? Update to iOS 10 GM or downgrade to iOS 9.3.5

Some iPhone users and iPad have already updated their devices to the beta version of iOS 10, but not everyone knows that any test firmware has an expiration date, after which the device will turn into a “brick.” As a result, you will have to upgrade to official version, or roll back the device to iOS 9. So don’t wait until the last minute and update right now to iOS 10 GM, or downgrade.

It is worth understanding that you will not be able to install the GM assembly “over the air”. Formally, this firmware is intended for developers and is installed on the gadget via iTunes. Public version iOS 10 will be available for installation directly from a mobile device.

3. Clean your device

Before installing iOS 10, it makes sense to part with unused games and applications. This measure is not mandatory, but it never hurts to get rid of unnecessary software before installing a major update. By deleting software from your device, you do not lose anything - you can restore any application from App Store.

In general, preparing for an update is a great opportunity to tidy up your device. ABOUT unnecessary applications was said above, but you can also delete temporary files, cache, web surfing history, cookies, logs and other garbage. You can find out more about this in the articles:

Using the proposed software, you can free up from 500 MB to 5 GB on your iPhone and iPad in a couple of minutes.

4. Install updates from the App Store

On devices with a large number third party applications it is recommended to install latest updates from the App Store. During the testing phase of iOS 10, many developers released new versions of the software. Having installed current versions Software, you can be sure that applications are compatible with iOS 10. You can download updates in the App Store -> Update section.

5. Check available space

The iOS 10 file weighs about 2 GB, with a minimum of 2.5 GB required on the device free memory to install the OS. This does not mean that ten takes more space – extra space necessary to unpack files and complete the update process. Find out the volume available memory on iPhone and iPad, you can go to the General menu -> About this device.

By the way, iOS 10 weighs much less previous versions. For example, a 128 GB iPhone with installed iOS 9 offers users only 113 GB of free memory, after iOS installations 10 this figure will increase to 122 GB. On a 16 GB iPhone with iOS 9, 11.9 GB is available, and after installing iOS 10 - 12.85 GB.

6. Back up your data

Many users use an iOS device as their main gadget for taking photos and videos. And hardly anyone wants to lose important points of his life, captured on digital images, unsuccessfully updating the firmware. To keep your photos or videos safe, it is recommended that you make a backup copy. This can be done through iTunes and iCloud. This will increase your chances of successfully recovering information in the event of loss.

iTunes: connect mobile device to your computer, launch iTunes, select it in top panel and click Create Backup.

iCloud: On iPhone and iPad, go to Settings -> iCloud -> Backup -> iCloud Backup.

Always create backups before updating the software on your devices. This applies to all major updates such as iOS 10.

7. Jailbreak?

MacDigger follows jailbreak trends in Apple world, so our first responsibility is to warn users of jailbroken iPhones and iPads that they are not available. at the moment exploits for iOS jailbreak 10. When upgrading to a new OS, you will lose your current jailbreak. However, it is not possible to return to iOS 9.3.3.

Rumor has it that the hackers are from Pangu. However, this information should still be classified as rumors. Worth the wait official statements, and then update your iPhone and iPad to the new OS. Most best option for now - stay on iOS 9.3.3 until it becomes clear whether a jailbreak for iOS 10 will be released or not. Everything should be resolved within a few days after the update is released.

8. Wait for the release

After completing the above steps, you will only have to wait until September 13th and install the OS. To install iOS 10 on iPhone, iPad and iPod touch, all you need to do is go to the operating system settings and in the General -> Software Update menu, confirm the firmware download.

– the first mobile operating system, for which Apple began releasing public beta versions. Now anyone can personally familiarize themselves with all the new firmware features and help Apple test it.

Testing the beta version involves downloading and installing it on your iPhone or iPad. This process cannot be called complicated, but it is a little unusual. For users who want to try out the new testing version for themselves iOS beta, we'll tell you how to do it.

1 . Open the Safari browser on your iPhone or iPad and click this link (mirror) to download your registered developer profile.

2. In the pop-up window that appears, select Allow.

3. Click iPhone and confirm to install the developer profile on your iPhone or iPad.

4 . Reboot your iOS device.

5. After reboot, open Settings and follow the path Basic → Software update. iOS 12 will be available for download and installation. Your device must have at least 2 GB of free space.

6 . Click the button Download and install" and wait for iOS 12 to install on your iPhone or iPad.

How to register for an iOS 12 Public Beta Program account (begins July 2018)

macOS Beta Program participants must re-enroll for iOS downloads 12 beta is not needed - you can use the same. Users who have not previously participated in the program must register with using Apple ID. To do this you need:

2 . Press the iOS button;

3 . Click the button "Load profile";

4 . In the pop-up window that appears, click on the button "Allow";

5 . Choose iPhone(the request will appear if your iPhone is paired with an Apple Watch)

6 . Click "Install".

8 . Click on the “ Install", confirming the terms of use.

9 . Click Reboot to reboot the device.

How to install the iOS 12 public beta

Once the OS has loaded, a notification will appear indicating that it is ready for installation. For installation you need:

1 . Open application " Settings", choose " Basic", and then click on the item " Software update»;

2 . Choose " Install»;

3 . Enter the lock screen password;

4 . Confirm your agreement to the terms of use by clicking " Accept».

The device will reboot, after which the latest current beta version of iOS will be installed.

How to roll back to the official OS if you are not satisfied with the test version of iOS

If for some reason you don’t like the beta version of iOS, you can roll back to official iOS.