How to return the previous action in Photoshop. How to undo an action in Photoshop

Undoubtedly, Photoshop is an excellent assistant for many users. It's not very easy to use, but that's the beauty of this app. No matter how high your level of Photoshop proficiency is, you can work in it in any situation. Of course, an inexperienced user will not be able to perform, say, at the level of a professional photographer, but performing basic actions with pictures is always welcome.

Using a keyboard shortcut

I think I won’t be discovering America if I tell you that a lot of things in Photoshop are “tied up” to certain key combinations. Canceling an action is no exception. In this matter, the main thing is to remember the necessary combinations in order to use them at the right moment, without resorting to hints. Below I will give three options for the development of events, which I am sure will be useful to you.

1. The keyboard shortcut Ctrl+Z will allow you to go back one step.
2. If you add a third one – Alt – to the above combination, you can go back several steps, in particular, up to 20.
3. Using the Shift+Ctrl+Z buttons on the keyboard simultaneously, you can go back several steps forward, but remember that this action is limited to 20 steps.

So, by remembering one basic combination and adding this or that key to it, you can cancel your actions in Photoshop.

Use settings

I want to tell you about one more technique, which, unfortunately, many do not take into account. 20 actions that can be canceled is a conditional figure set by default. If necessary, you can increase it, say, to 100, and then you certainly won’t be afraid that you won’t be able to return to a certain stage of your work.

So, here's what you need to do: open the program menu, then go to the editing section. There, open the subsection “Settings” - “Performance” - “Action History”.

And here, set any parameter, for example, 100 actions. I would like to draw your attention to the fact that if the performance of your computer leaves much to be desired, and it can barely handle such a capacious program, then such a change in settings will most likely slow down the work of Photoshop. It's also worth

Erroneous action In a document created in MS Word, in the “Edit” menu, select the “Undo” command. The same result can be achieved using the hotkeys Alt+Backspace. If you suddenly realized that action was correct, and in vain you canceled it, use the combination Ctrl+Y.

On the Quick Access Toolbar, find the “Cancel” button. If you need to undo multiple actions at once, click the down arrow next to this button to expand a list of your most recent actions. While holding down the left mouse button, mark unnecessary operations with the cursor and release the key. The same result can be achieved using the keyboard shortcut Ctrl+Alt+Z.

Next to Undo on the Quick Access Toolbar there is a Redo button. It returns deleted steps. Her action duplicated by the F4 function key. If the "Cancel" button has not been used, "Redo" will not be available.

To undo actions in MS Excel, you also use the “Undo” command from the edit menu, the “Undo” button on the quick access toolbar, and the Alt+Backspace and Ctrl+Z keyboard shortcuts. To return erroneously canceled actions, the same tools are used as in MS Word.

In Adobe Photoshop, in this situation, it is convenient to use the hotkeys Ctrl+Alt+Z and the Step Backward command from the Edit menu. To return an erroneously canceled action, use the Step Forward command and the combination Shift+Ctrl+Z.

In addition to standard keys and commands, Photoshop has a convenient History option. Find it in the Window menu and check the box. Find what you don't need in the History panel action, pick it up with the mouse and drag it to the trash icon at the bottom of the panel. To cancel all changes, click on the image icon at the very top of the list.

If you have made some fatal changes to the operating system, the System Restore service will help you return it to functionality. Open the program launch window using the Win+R combination and enter the msconfig command in the “Open” line. Go to the “Tools” tab, check “System Restore” in the list and click “Run”. Select the date closest to the date when the erroneous actions occurred.

Sources:

• how to return an action back

When working in applications that edit certain files, a certain number of previous file modification steps are automatically saved. In some cases, the entire story is preserved; in others, only part of it is preserved. Almost everywhere, the function of restoring the original state is available, however, provided that the file was not saved during processing.

Instructions

If you need to cancel the last ones related to entering and formatting text in an editor, browser window, etc., just press the Ctrl+Z key combination. Also in the MS Office Word text editor there is a special button on the toolbar that is responsible for undoing recent changes. Another option is to use the “Edit”, “Undo” menu. In this case, if the document editing process was previously saved, returning to the previous position is possible.

If you need to undo recent changes associated with image editing in Adobe Photoshop, use the keyboard shortcut Alt+Ctrl+Z or click on the "Edit" menu item, then select "Step Back" from the drop-down menu.

If you want to completely restore the file, press F12. If you have already saved changes, then undoing them will not be possible. When editing graphic files in general, it is best to create and edit copies of them, and store the originals separately. Also view the history of changes in a special table of changes, which is accessible from the “Window” menu item.

If you want to undo recent changes that have affected your computer (for example, installing updates, programs, utilities), open the Start menu, select the standard programs menu, then System Tools, and finally System Restore. A large window for restoring the operating system will appear on your screen; select on the program calendar a checkpoint for saving the settings before making changes to the system, roll back to this date.

Keep in mind that before doing this, it is best to save the personal data you use while working in applications installed during this period, since the programs will be deleted along with them. These can be various account logins and passwords, key files, links, and so on.

Sources:

• what to do if you cheat

When working with images in " Photoshop» you may need to cancel the previous action and return to the original picture. To return to the previous result, you need to perform several steps.

You will need

• - computer;
• - any version of Photoshop.

Instructions

Working with images is a fascinating activity that requires certain knowledge and skills from the photographer. But even an experienced Photoshop user often encounters situations when, while working on creating a new masterpiece, they need to go back a few steps.

You can make changes to the processed photo at any stage of editing. True, before starting work, you naturally need to open the image. To do this, just simultaneously press the keyboard keys Alt+Shift+Ctr+O or in the “File” menu on the work panel, select the “Open as” option, and then specify the location of the image and its format.

Next, proceed to the actual processing. And if you need to make changes and go back, look at the “Editing” section on the work panel. Here you can perform the necessary operations by selecting the appropriate option: “Undo”, “Step Back” and “Step Back”.

For convenience, you can use the “hot keys”: Ctrl+Z – to undo the last action, Shift+Ctrl+Z – to take a step forward and Alt+Ctrl+Z – to take a step back.

View the entire history of image changes in " Photoshop» is also possible by selecting the appropriate operation in the “Window” menu of the top panel. Check the “History” checkbox in this section, and a table will appear in the working window showing all the actions performed with the picture.

To cancel changes made at any stage of image processing, just find the desired operation on the “History” screen and return to it by left-clicking on it. In this case, you will end up at exactly the editing step you indicate.

If you need to save all previously performed actions in the photo, leave a draft version of the image for yourself. After all, you may still need it. And in order not to get confused, when saving, come up with a name for it, by which you can easily navigate all your photographs, completed and still at the processing stage.

The procedure for canceling and uninstalling installed updates to the Microsoft Windows operating system is a standard operation that does not require the use of additional software.

Instructions

Call the main system menu by clicking the "Start" button and go to the "Control Panel" item. Expand the Programs link and expand View installed updates under Programs and Features. Find the update to be deleted in the list of the dialog box that opens and call its context menu by right-clicking. Specify the “Delete” command and click the “Yes” button in the system request window that opens. Wait for the process to complete.

If we are talking about updating SP3 for Windows XP, use the uninstall option in the hidden system folder $NTServicePackUninstall$. To do this, return to the main Start menu and go to the Run dialog. Type
drivename:\windows\$NTServicePackUninstall$\spuninst.exe
in the “Open” line and launch the update package removal wizard utility by clicking OK. Confirm the selected action by clicking the “Next” button in the main window of the wizard and follow all its recommendations.

One of the most common ways to cancel an installed update is to use the function to restore the system to its previous state. To use this method, make sure that the computer has been restarted at least once after installing the update and call the main system menu by clicking the “Start” button. Go to the Run dialog and type
%systemroot%\System32\restore\rstrui.exe
in the "Open" line. Confirm the launch of the utility by clicking OK and select the “Restore your computer to an earlier state” option in the dialog box that opens. Confirm the selected action by clicking the “Next” button and select the desired date for a system rollback. Save the changes made by clicking the “Next” button and follow all the recommendations of the recovery wizard. Restart your computer to apply the changes you made.

Sources:

• Uninstall Windows XP SP3
• how to uninstall installed updates

Adobe Photoshop editor is a powerful digital image processing tool. This is a tool for solving professional problems. Due to its focus on a professional environment, Photoshop is not known for its simplicity. Therefore, beginners using Photoshop have a lot of questions. One of the first, perhaps, will be about how to cancel in photoshop changes made.

You will need

• Graphic editor Adobe Photoshop.

Instructions

Undo the last thing you did action. To do this, select "Edit" in the main menu of the application. In the drop-down menu that opens, click on the item whose name begins with “Undo”. The name of this item is from the word “Undo” followed by the name of the last used tool or action performed. Therefore, you can always see which operation will be canceled. Instead of selecting the specified menu item, you can press Ctrl+Z. It should be remembered that this operation only cancels

If you have studied lessons on operations in Photoshop, starting with the very first one, let's remember all the material we covered - and there was a lot of it! If you skipped straight to this lesson, that's okay, but you missed a lot of useful information.

We looked at what operations are, studied the contents of the operations panel, and learned the difference between the concepts of “operation” and “set of operations.” We also worked with the default operations that are automatically loaded into the program, and with additional sets of operations that initially come with Photoshop.

We looked at how to play through an operation step-by-step to better understand what happens at each stage of the operation, and finally, we looked at how to make changes to and edit an operation. Don't forget the little helpful asides we've made as we've covered topics, such as how to view the details of an operation, including step details, how to show or hide dialog boxes while an operation is running, how to enable or disable individual steps of an operation, and even where Find the default standard operations in Photoshop CS2!

Thus, we have studied enough material to try to record our own operation in Photoshop!

In this tutorial we'll look at how to record an operation to create a soft glow effect. Once we record it, we can apply this effect to any image! Below is the photo I will be working with:

The image I will use when recording the operation

Let's get started!

Step 1: Create a new set of operations if necessary

As I mentioned earlier, all operations must be placed inside a set of operations, and it does not matter how many operations the set contains - hundreds or just one. The main thing is that all operations are located inside a set. In the lesson on editing actions, we learned that to create a new set of actions, just click on the “New Action Set” icon located at the bottom of the actions panel. This icon is shaped like a small folder, because action sets are actually nothing more than folders where the actions themselves are stored:

To create a new set of operations, click on the “Create a new set of operations” icon located at the bottom of the operations panel

This action will open the New Set dialog box, where you can enter a name for the new action set. I've already created a new set of actions and called it "My Actions". If you took my tutorial on editing actions in Photoshop, you've probably already created a new set of actions, so there's no point in creating it again. If you have not created a new set of operations, then perform this action. The screenshot below shows that I named the new set “My Operations,” but you, in turn, can come up with any other name you want:

The New Set dialog box allows you to enter any name for your new activity set

After entering the name, click OK to close the dialog box. If you now look at the Actions panel, you will see that your new preset has appeared there, located below the other presets currently loaded in Photoshop. Since I will be using the action set that I created earlier, we will be able to see in it the “Photo Corners_Enhance” operation that we edited in the last lesson. If you have just created a new set, then it will be empty:

A new set of actions has appeared in the Actions panel

Keep in mind that you do not need to create a new set of activities every time you want to create a new activity. Once you have created a new activity set to house the new activity, you can also place as many other activities in the set as you wish. It's also a good idea to remember not to place your own actions inside the action sets that are natively loaded into Photoshop, such as Default Actions, Image Effects, Frames, and so on. Store your own operations in new sets that you create yourself.

Step 2: Create a new operation

Now that we've created an activity set to house the new activity in, let's create the activity itself. To do this, click on the “Create a new action” icon at the bottom of the actions panel:

To create an operation, click on the “Create a new operation” icon»

This action will open the New Activity dialog box, where we can enter a new name for our activity and select an activity set to later place the activity into. Since we'll be recording the steps required to create a simple soft glow effect, I'll name the operation Soft Glow. Directly below the data entry box where you entered a name for your operation is the Set option. Here we will be able to select the set in which our operation will be placed. If your new activity set is not selected, select it from the list. In my case, you can see that I placed the "Soft Glow" operation in the "My Operations" set:

Enter a name for your new operation and select a set where you will place it

You'll notice a few more options at the bottom of the New Action dialog box. The Function Keys option allows you to optionally assign a specific key combination to a new operation, using any function keys in conjunction with the Shift or Ctrl (Win) / Command (Mac) key. As for me, I would not pay attention to this option, since it is very easy to lose the operation by simply clicking on the “Run Operation” icon located in the operation panel. The Color option allows you to give your activity a specific color that will only be visible when viewing your activities in Button Mode, but that's not the topic of this tutorial. So you can easily skip the Function Key and Color options and move on, but that's just my opinion.

Step 3: Click on the “Record” button

When you are done with the parameters, click on the “Record” button located in the upper right corner of the dialog box:

Click on the “Record” button to start recording a new operation

As soon as you click on the "Record" button, you will see that your new operation has appeared inside the "My Actions" action set in the Actions panel. You'll also see the record button at the bottom of the panel light up red, indicating that recording has started:

Our operation appeared in the action panel and the record button turned red

Remember that there is no reason to worry. Yes, recording has begun, but it doesn't feel like recording a movie. Transactions are not recorded in real time. All Photoshop will record are the steps we play through, and it won't care how long it takes us to complete the steps.

So let's start recording the steps for our operation!

Step 4: Taking a photo

As the first step in creating the soft glow effect, I'm going to tell the program to take a photo of the original image before applying the effect. In fact, you don't necessarily have to record taking the photo as the first step of the operation, but since this step will later give us the ability to quickly undo the effect, it doesn't hurt to include this action in the operation. So while in recording mode, I'm going to take a moment to switch to the History panel, which is located next to the Actions panel by default, and click on the New Snapshot icon located at the bottom. panels:

Taking a snapshot of the image is the first step of the Soft Glow operation.

This action will add a new snapshot of the image to the History panel:

A snapshot of the image appears at the top of the History panel

Now, if I need to cancel an effect after performing an operation, I can simply switch to the “History” panel and click on the photo.
I'll switch back to the Actions panel and we'll see that the Soft Glow operation now has a first step, Make snapshot. Our first step was successfully recorded:

The first step in the operation has appeared

Step 5: Copy the Background Layer

Now that we've found a way to quickly undo an effect when needed, we can start creating it! The first thing we need to do is create a copy of the Background layer. The Background layer is the layer that contains the original image, and is currently the only layer in the Layers panel. In order to create a copy of it, go to the “Layers” menu section at the top of the screen, select “New” and then “Copy to a new layer” (Layer via Copy). A faster way to copy a layer is to press Ctrl+J (Win) / Command +J (Mac).

Either of the above methods allows us to create a copy of the Background layer (or at least a copy of any currently selected layer, in our case the Background layer). If we look at the Layers panel, we can see that there are now two layers placed there. The original background layer is below, and a copy of the background layer called "Layer 1" is above it:

A copy of the background layer called "Layer 1" appears in the Layers panel

If we look at the "Operations" panel, we will see that a second step has been added to the "Soft Glow" operation - "Copy to a new layer" (Layer Via Copy):

The operation now has a second step - “Copy to new layer”

Step 6: Rename the New Layer

Before we continue, let's rename this layer. I don't like generic layer names like "Layer 1" and think layers should be given more meaningful and descriptive names. To rename a layer, double-click the layer name, then type the new name and press Enter (Win) / Return (Mac) to confirm the changes. We'll apply a Gaussian Blur filter to this layer later, so I'll name this layer Gaussian Blur:

Double-click on the name “Layer 1” and type in a new one – “Gaussian Blur”

When we look at the Actions panel, we can see that a third step, “Set current layer,” has been added to our operation. The name of the step, in reality, only tells us that something will be applied to the currently selected layer, but if we expand the details of the step by clicking on the triangle to the left of its name, then it becomes clear to us that during the execution step, the selected layer will be given the name “Gaussian Blur”, as we wanted:

The operation now has a third step - “Set current layer”

Step 7: Change the Blend Mode of the New Layer to Overlay

Until now, despite the fact that we have already recorded three steps in our operation, the image in the document window has not changed and looks the same. It's time to fix this. We're going to change the blending mode of the new layer. With the Gaussian Blur layer selected, look for the Blend Mode option located at the top of the Layers panel, which looks like a drop-down box with the current value set to Normal. Click this drop-down window to open it and then select the Overlay mode from the list of modes that appears:

Change the blending mode of the “Gaussian Blur” layer to “Overlay”

Using the Overlay blend mode gave the image in the document window greater contrast and increased color saturation:

The image has become more contrasting and saturated

Let's look again at the Actions panel, where a fourth step has appeared in our operation, also called “Set current layer”. If we expand the step to view its execution details, we will see that as it runs, the Overlay blend mode will be applied to the selected layer:

The "Soft Glow" operation now has a fourth step - "Define Current Layer"

We have successfully added a fourth step to the Soft Glow operation. Just a few more steps to write down, and we'll have a finished effect that we can apply to any image in Photoshop, whenever we want!

Step 8: Apply the Gaussian Blur Filter

To create a soft glow effect, we need to blur our image on the “Gaussian Blur” layer. To do this, go to the “Filter” menu section at the top of the screen, select “Blur” and then “Gaussian Blur”. This action will open the Gaussian Blur dialog box. Move the blur radius slider at the bottom of the dialog box to the right to increase the amount of blur that will be applied to the layer, or to the left to decrease it. As you move the slider, monitor the image on the screen and select a blur radius so that the desired result is visible. I'll choose a blur radius of 13 pixels, which will give my image the effect I want:

Create a soft glow effect by choosing the desired blur radius in the Gaussian Blur dialog box.

Click OK after selecting the blur radius value to confirm blurring the image and exit the dialog box. Below is my image after applying the Gaussian Blur filter:

Image after applying the Gaussian Blur filter

If we look at the "Operations" panel, we will see that a fifth step has been added to the "Soft Glow" operation - "Gaussian Blur". When viewing the step details, you will notice that each time the operation is performed, the blur radius will automatically become 13 pixels:

The operation now has a fifth step - “Gaussian Blur”

That's great, but what if the next image we want to apply our effect to doesn't have a radius of 13 pixels? What if you need a larger or smaller blur radius to achieve the desired result? Perhaps we should tell the program to display the Gaussian Blur dialog box each time we perform an operation, where we can choose the blur radius for the image if necessary.

As you and I already know, we can easily enable or disable dialog boxes while performing an operation by simply clicking on the dialog box toggle icon to the left of the step name. By default, all window toggle switch icons are empty. This means that while the operation is running, the dialog boxes associated with the corresponding steps will not appear on the screen.

Since I want the Gaussian Blur dialog box to appear every time I perform the operation, I'll click the empty window toggle icon to the left of the step name. When I do this, a small gray dialog box icon appears, indicating that the Gaussian Blur dialog box will now appear on the screen when I perform the operation:

Click the dialog box toggle icon to the left of the Gaussian Blur step so that the corresponding dialog box appears on the screen when performing the operation

Step 9: Reduce Layer Opacity to 65%

To complete the operation, let's lower the opacity of the Gaussian Blur layer so that the effect is not so obvious and the colors are too saturated. To reduce the opacity of a layer, select the Opacity option in the upper right corner of the Layers panel, just opposite the Blend Mode option. By default, the Opacity value is 100%. Click on the small arrow to the right of the "100%" value, which will cause a scale with a slider to appear. Move the slider to the left to reduce the opacity to 65%:

Use the small slider to lower the Gaussian Blur layer's opacity to 65%.

Important Note: As you move the slider to reduce the opacity of the layer, do not release the mouse button until you move the slider to the desired mark.

Each time you release the mouse button, Photoshop will consider this action as a separate step in the operation, resulting in several steps to reduce the opacity of the layer. For example, if you move the slider to 90%, release the mouse button, then move the slider to 75%, release the button again and then reach 65% and release the button again, you will get 3 steps: one - reducing the opacity of the image to 90%, the second - up to 75% and the third - up to 65%. If such an incident happens to you, wait until the transaction has finished recording, then click on the extra steps if you do not need them, and move them to the trash can icon at the bottom of the action panel to delete them.

An even more important note: If you are working in Photoshop CS, do not use the dynamic sliders to reduce the layer's opacity when recording operations. If you try to reduce the opacity of a layer to 65% using this slider, you will end up with 35 separate steps, each of which will reduce the opacity of the layer by 1%. Therefore, no sliders when recording operations, otherwise you will have to delete a lot of unnecessary steps later!

So, after lowering the layer's opacity, you are done recording all the steps required for the operation! Let's look at our Actions panel, where we can see the last step that appears, called "Set current layer". If we expand the step to view details, we can see that the last step will lower the layer's opacity to 65%.

The last step in the operation appeared.

Below is my image after lowering the layer's opacity and completing the Soft Glow effect:

Wedding photo after applying the Soft Glow effect.

Step 10: Stop recording the operation

We've finished recording our operation, and now we need Photoshop to stop recording. To do this, click on the “Stop Recording” icon located at the bottom of the “Operations” panel:

Click on the "Stop Recording" icon to finish recording the operation

And so we did it! We have successfully recorded our first operation and now we have an effect that we can apply to any image! Let's quickly make sure that our operation is working as expected. I'll open another image in Photoshop:

New image opened in Photoshop

To play a new action, I'll select it from within the My Actions set in the Actions panel and then click on the Run Action icon located at the bottom of the panel:

Choosesurgery“Soft glow” and then click on the “Perform operation” icon on the action panel

Once I click on the Perform Operation icon, the program begins to play through the steps of first taking a snapshot of the image in the History panel, then making a copy of the background layer, then naming the new layer Gaussian Blur and changing the blend mode to Overlay " When the program gets to the step where I want to apply the Gaussian Blur filter to the image, it will pause the operation and display the Gaussian Blur dialog box, where I can enter a new value for the blur radius if necessary:

The program pauses the operation and displays the Gaussian Blur dialog box.

Note that the dialog box is already set to a radius value of 13 pixels, since this is the value we entered when recording the operation. I could change the value to something else if I wanted, but I think a radius value of 13 pixels would work for my image. I'll just click OK to confirm the settings, exit the dialog box, and let the program continue with the operation.
The program will continue with the operation, lowering the opacity of the Gaussian Blur layer to 65%, and applying the effect will be completed. Reproducing the operation took much less time than if I had performed all the steps myself. Below is the image after applying the Soft Glow effect:

The Soft Glow effect was easily applied to the second image during the operation

The result turned out exactly as we expected! Now we can apply our effect to any image we want!

Since we spent a significant amount of time and effort recording the transaction, we should save it so that it does not get lost. In the next lesson we'll look at how to save and how to load operations!

Translation: Ksenia Rudenko

When working with Photoshop, very often there is a need to undo erroneous actions. This is one of the advantages of graphics programs and digital photography: you don’t have to be afraid to make mistakes or go for a bold experiment. After all, there is always the opportunity to remove the consequences without damaging the original or the main work.

This post will talk about how you can undo your last operation in Photoshop. You can do this in three ways:

1. Key combination
2. Menu command
3. Using History

Let's look at them in more detail.

Every experienced user is familiar with this method of undoing recent actions, especially if he uses text editors. This is a system feature and is present by default in most programs. When you click on this combination, the last actions are sequentially canceled until the desired result is achieved.

In the case of Photoshop, this combination has its own characteristics - it only works once. Let's give a small example. Using the Brush tool, draw two points. Pressing Ctrl+Z causes the last point to be deleted. Pressing it again will not delete the first point placed, but will only “delete the deleted”, that is, return the second point to its place.

Method number 2. Menu command "Step back"

The second way to undo the last action in Photoshop is to use the menu command "Step Back". This is a more convenient option because it allows you to undo the required number of incorrect actions.

By default, the program is programmed to cancel 20 recent user actions. But this number can be easily increased with fine tuning.

To do this, you need to go through the points sequentially.

Then in subparagraph "Action History" the required parameter value is set. The interval available to the user is 1-1000 .

This method of undoing recent user actions in Photoshop is convenient for those who like to experiment with the various features that the program provides. This menu command is also useful for beginners when mastering Photoshop.

It is also convenient to use the combination CTRL+ALT+Z, which is assigned to this team by the developers.

It is worth noting that Photoshop also provides a function to undo the last action. It is called using the menu command "Step Forward".

Method No. 3. Using the History Palette

There is an additional window on the main Photoshop window "Story". It records all user actions taken when working with an image or photograph. Each of them is displayed as a separate line. It contains a thumbnail and the name of the function or tool used.

If you don’t have such a window on your main screen, you can display it by selecting "Window - History".

By default, Photoshop displays the history of 20 user actions in the Palette window. This parameter, as mentioned above, can be easily changed in the range 1-1000 using the menu "Editing - Settings - Performance".

Using Stories is very simple. Just click on the required line in this window and the program will return to this state. In this case, all subsequent actions will be highlighted in gray.

If you change the selected state, for example, use a different tool, then all subsequent actions highlighted in gray will be deleted.

This way you can undo or select any previous action in Photoshop.

Adobe's graphics editor, Photoshop, has been a favorite among photographers and graphic designers for almost a decade. Here, in the electronic environment, you can correct any of your mistakes and go back several steps, which is difficult to implement on paper. In this article you will learn all the nuances of undoing actions in Photoshop.

How to quickly undo an action in Photoshop

If you need to undo one or three actions, you can do this using Photoshop hotkeys. These are special combinations of buttons that you need to remember, as they significantly reduce the time you spend working with the program and can significantly simplify it.

Completely undo the last action: CTRL + ALT + Z. This will take you one step back in your editing.

Another method: CTRL + Z. It works completely differently. You roll back the action, but if you press this key combination again, the last step will take effect again. This is very convenient when you are not sure whether you want to undo the last action. By pressing CTRL and Z several times you can see both options and choose the best one.

If you roll back changes in this way and do not return them by clicking on the combination again, then the rollback will remain in effect.

How to undo an action in Photoshop through the “History” tab

If you have to roll back your editing changes many steps back, it is better to immediately go to the “History” tab. Setting up its display is quite simple.

Go to the “Window” or “Window” section. Select “History” or “History”.

A small window with the same name will immediately appear on the screen.

As soon as you start editing photos, new lines with the names of the tools will begin to appear in “History”. For example, if you took a brush and painted some area, the “Brush” item will appear in the history.

To undo several actions at once, simply click on the editing period to which you want to roll back the changes. This way you can navigate through history and select any point.

There is also a settings tab available in the history, where you can slightly change the appearance of this window. Click on the three stripes in the upper right corner. Then select the “History Options” section.

How to increase the size of a story in Photoshop

It often happens that a story suddenly ends at the right place. You need to undo the changes, but these lines are no longer there. To do this, you need to increase the memory cache for consumption by history.

Open the “Edit” or “Editing” tab, then go to “Preferences”. Another window pops up in which you need to click on “General” or “General”. It all depends on the language of your program.

In the window that appears, go to the “Perfomance” tab, in which you will find the section labeled “History States”. By default, it is set to “50”; change it to the maximum available “1000” by simply pulling the slider to the right.

Now your history is difficult to fill: it will store your every action, and you can undo any step.

Try to remember the hotkeys and this method to make it easier to navigate the editor.