Kingston flash drive recovery program. Kingston USB flash drive recovery

24.03.2017

Almost every person carries with him a USB drive on which various documents, photos or audio recordings are stored. Sometimes it happens that the flash drive is not displayed in Windows or does not allow you to write new information. Similar errors often occur on drives with two memory chips. For the well-known company Silicon Power, flash drives of 16, 32, 64 GB sometimes become unreadable on the computer or the message appears "Disk is write protected". Such problems can be easily eliminated with special programs.

Causes and symptoms of an error

In total, there are 5 reasons that may cause the device to malfunction:

• logical errors;
• physical damage to parts;
• electrical overload and overheating of the carrier;
• Damage to the memory controller firmware;
• NAND memory wear or failure.

Logical errors appear when:

• incorrect formatting;
• sudden removal of the device during information exchange;
• Using the wrong file system.

Physical damage, overheating, or an unexpected power surge most often damages the contacts on the board. They can be restored by soldering. But if the microcontroller is damaged, it cannot be repaired.

If the controller's logic program is violated, the following problems are observed on the flash drive:

• not detected on the computer (there is a connection sound, but the disk is not displayed);
• prohibition on recording new data;
• no disk access;
• The drive size is specified incorrectly.

To restore the device's functionality, you will need to reflash the microcontroller. But after performing this operation, all data from the disk will be irretrievably lost.

Method 1: SP Toolbox

Branded programs are most effective for restoring Silicon Power drives. SP Toolbox combines various components for flash drive diagnostics.

After diagnostics are completed, you can begin to restore the media.

Method 2: D-soft Flash Doctor

As a rule, flash drives store important information that you don’t want to delete. To avoid losing it, you can create a disk image. D-soft Flash Doctor allows you to scan drives, create and burn disk images. The software also allows you to restore a flash drive; for this, a full format is performed.

To perform a restore, follow the instructions:

1. Select the damaged disk.
2. Click "Recover media".

Method 3: SP G50 FW Update Program

To update the Silicon Power firmware, a special utility SP G50 FW Update Program has been created; it can be downloaded from the official website. Find the section on the page "USB drives" and click download.

The software is downloaded in an archive, which contains an .EXE file and English instructions for use. After launching the application, a window with a simple interface will appear.

In the main window it says that before clicking the button "Update" You need to make a backup copy of your data, since all files will disappear after flashing. It will be impossible to restore the information.

1. Launch the program.
2. Insert the Silicon Power flash drive.
3. In the window "Device" The device letter will appear.
4. If a window appears "Conductor" Windows, then be sure to close it.
5. Click "Update".

Wait for the process to complete. Typically this takes about 1 minute. After updating the firmware, you can continue to use the device for its intended purpose. If you previously made a backup, restore the data.

Method 4: Formatting and checking for errors

If third-party operating systems, such as Ubuntu, Kali Linux, etc., were previously written to the drive, then quite often after this a problem arises with recognizing the flash drive. This error is due to data formatting features in Windows and Linux.

If the drive is detected in the system, but errors like "Access denied", "USB device not recognized" etc., then check the flash drive for errors. To do this:

If the errors have not been corrected, then format the drive as FAT32 or NTFS.

First, try formatting the media as FAT32; if that doesn’t help, then use NTFS.

Method 5: Diskmgmt.msc

Sometimes incorrect reading can occur due to assigning the same letters to different drives. To fix this error:

The above steps allow you to restore the Silicon Power flash drive. To avoid errors in the operation of the media in the future, try not to interrupt the operation of the USB device while recording or deleting information. To recover media, in addition to proprietary programs from Silicon Power, you can use third-party software, but it is rarely better than utilities from manufacturers.

In our world, almost everything breaks and Silicon Power flash drives are no exception. The damage is very easy to notice. In some cases, some files begin to disappear from your storage device. Sometimes the drive simply ceases to be detected by the computer or any other device (it happens that it is detected by the computer, but not detected by the phone, or vice versa). Also, the memory card can be detected, but not opened, and so on.

In any case, it is necessary to restore the flash drive so that it can be used again. Unfortunately, in most cases you will not be able to recover any information and it will be permanently deleted. But after this, the USB drive can again be fully used and information can be written to it without fear that it will be lost somewhere. It is worth noting that removable media from Silicon Power very rarely last long after restoration; they still have to be replaced.

You can restore Silicon Power removable media using the programs that the company itself released. Apart from this, there are other software that help in this matter. We will analyze proven methods that have been tested by users from all over the world.

Method 1: Silicon Power Recover Tool

The first and most famous utility from Silicon Power. It has only one purpose - to fix damaged flash drives. Silicon Power Recover Tool works with removable media with Innostor IS903, IS902 and IS902E, IS916EN, and IS9162 series controllers. Its use is extremely simple and looks like this:

Method 2: SP ToolBox

The second proprietary program, which includes as many as 7 instruments. We only need two of them. To use Silicon Power ToolBox to recover your media, do the following:

The program can now be closed.

Method 3: SP USB Flash Drive Recovery Software

The third program from the manufacturer, which recovers flash drives from Silicon Power with great success. In fact, it performs the same process that users usually do using the iFlash service. Read about what it is and how to use it in the lesson on restoring Kingston flash drives.

The point of using this service is to find the necessary program and use it to restore the flash drive. The search is carried out using parameters such as VID and PID. So, USB Flash Drive Recovery independently determines these parameters and finds the desired program on Silicon Power servers. Its usage looks like this:

Using this tool also does not make it possible to save the data contained in the drive's memory.

Method 4: SMI MPTool

This program works with Silicon Motion controllers, which are installed in most Silicon Power flash drives. SMI MPTool differs in that it performs low-level recovery of damaged media. You can use it as follows:

1. program and run it from the archive.
2. Click on the button Scan USB" to start scanning your computer for a suitable flash drive. After this, your media should appear on one of the ports (column " Items"on the left). Click on it in this column to highlight it. Actually, if nothing happens, it means that the program is not suitable for your carrier.
3. Next, click the “ Debug" If a window appears asking you to enter a password, enter the number 320.
4. Now click the button Start" and wait for the restoration to complete.

In some cases, it helps if you do the above steps several times. In any case, it's worth a try. But, again, don’t expect data to be saved.

Method 5: Recuva File Recovery

Finally, we have reached a method that allows us to restore at least part of the damaged information. Only then will it be possible to restore the functionality of the device itself using one of the utilities described above. Recuva File Recovery is not SP's own development, but for some reason it is owned by this company. It is worth saying that this is not the same program that is familiar to all of us. All this only means that Recuva will be the most effective in working with flash drives from Silicon Power.

To take advantage of its capabilities, read the lesson on our website.

Only when you choose where you want to scan for deleted or damaged files, select the option " On my media card"(this is step 2). If the card is not detected or no files are found on it, start the whole process again. Only now select the option “ In a specific location" and specify your removable media according to its letter. By the way, you can find it out if you go to “ My computer"(or simply " Computer», « This computer" - it all depends on the version of Windows).

Method 6: Flash Drive Recovery

This is also a universal program that is suitable for most modern models of removable storage media. Flash Drive Recovery is not developed by Silicon Power and is not listed among the recommended utilities on the manufacturer's website. But, judging by user reviews, it is extremely effective in working with flash drives from this manufacturer. Its usage looks like this:

In addition to Recuva File Recovery and Flash Drive Recovery, you can use TestDisk , R.saver and other utilities. The most effective such programs are given in list on our website.

After the recovery of lost data has been completed, use one of the above utilities to restore the functionality of the entire drive. You can also use the standard Windows tool to check disks and fix errors. How to do this is shown in the lesson on restoring Transcend flash drives (method 6).

Finally, you can format your removable media using other programs or the same standard Windows tool. As for the latter, you need to do the following:

1. In the window " Computer» (« My computer», « This computer") right-click on your flash drive. In the drop-down menu, select “ Format…».
2. When the formatting window opens, click on the " Begin" If it doesn’t help, start the process again, but uncheck the box next to “ Quick…».

Also try using other disk formatting programs. The best of them are given in list on our website. And if this doesn’t help, we won’t recommend anything other than buying a new media.

Even the most advanced USB flash drives are not immune to breakdowns. If the flash drive is no longer detected by the computer or the operating system responds to access attempts with errors, then it’s time to take appropriate measures.

First of all, you should determine your priorities - what is more important is the performance of the drive or the files recorded on it. The user's options also depend on this. However, there are a number of checks that should be carried out before starting repairs:

1. Try to access the data from another connector or computer.
2. Inspect interfaces for blockages, rust, or physical damage.
3. Make sure that no one who has access to the storage device has deleted data from it.

Having discovered physical damage, it is better to prepare for the fact that both the data and the device itself are lost. If the information on it is critical, then you can turn to professionals.

Recovery with file preservation

It is possible to restore the functionality of removable media by saving all the data recorded on it only if the problem lies in a damaged file system. Tools are used to repair the file system Windows or special programs. The first thing you should try is the softest method - the check disk utility.

Running the scan is quite simple. If the flash drive appears in the folder "Computer", then you should right-click on it and select "Properties". In the tab "Service" There will be a disk check section and a corresponding button that starts the process.

If the disk is not displayed, and all contacts are intact and not littered, then the check can be performed from the command line. To do this, in the search bar menu "Start" should be entered cmd.exe and run the detected program as an administrator (via the right-click menu).

Then enter the following commands one by one on the command line:

1. diskpart(Enter Disk Management program.)
2. listvolume(Call a list of volumes, which will indicate the connected flash drive and the letter that the system assigned to it. In the example, a removable disk with the letter F.)
3. exit(Exits Disk Management.)
4. chkdsk *: /f(Command to run disk check, where * is the letter assigned to the flash drive.)

As a result of these manipulations, the media will be checked, and all errors that the system can remove will be corrected. However, the success of the procedure is not at all guaranteed. After this, you should try to restore the file system of the flash drive using programs DMDE or TestDisk.

However, even these actions may not bring results. Then, if the data is critically important, all that remains is to turn to professionals for secure data extraction.

Repair with data deletion

To restore the functionality of a flash drive without saving data, just format it. You should try the quick and low-level formatting methods one by one. The first is easily performed from the operating system through the menu that appears when you right-click on the flash drive icon.

Special utilities are used for low-level formatting. Firm Silicon Power offers a tool for restoring drives of its production - SP USB Flash Drive Recovery Software .

After downloading the program, just connect the USB flash drive and run the program. After launch, the utility will automatically detect the drive and offer to restore it. If the wrong section is indicated in the window, you should select the desired one from the drop-down list and click the button Recover. After the procedure is completed, all files will be deleted and the drive will return to working condition.

Losing information on a memory card is a very unpleasant thing. What if there was valuable information on the drives? Its loss can be a real tragedy, and a flash drive recovery utility can be a salvation. But before we describe the process of recovering information on a hard drive, let’s consider the possible reasons for the loss of information on memory cards:

Drive software failure. If your flash drive does not open and asks you to format it, this is exactly the case. It is usually caused by a crash of a special driver installed on any flash card. You can install it again, and then the drive’s functionality will be restored. However, the information will have to be restored separately. - Virus attacks. Yes, picking up a virus by transferring information from one PC to another is as easy as shelling pears. Some viruses specialize specifically in deleting/damaging files. - Mechanical damage. May be caused by temperature changes, shocks, falls, etc. In this case, the memory card may become completely unusable. But even in this case, it is possible to restore information! - Incorrect operation. A flash drive and/or information on it may be damaged in cases where: you do not use the “Safely Remove Hardware” option, remove the USB drive while downloading, recording information, watching movies, etc.

Flash drive recovery programs

How to recover information on a flash card? In almost all of the above cases, special utilities for flash drive recovery will help us. There are a huge number of them now. We recommend that you use only proven software products. “Flash Drive Recovery 2.0” is a powerful utility for recovering flash drives. She is capable of:

Recover information on drives of different formats and manufacturers (Silicon Power, Kingston Datatraveler, Alcor Micro, Corsair Voyager) and of any size (4gb, 8gb, 16gb, 32gb).
Work in cases where the flash drive has been formatted many times.
Recover information even on damaged memory cards.

Recover up to 100% of deleted information.

Flash drive recovery software can recover data from any type of storage device (music devices, digital cameras, flash drives, USB drivers, PC cards, etc.). This utility recovers all damaged and deleted files, even if the memory card has been reformatted.