Connecting to tablet hdd. Possible problems when connecting OTG

By the way, the annual experience of using this device by his wife is extremely positive - the animal fulfilled its tasks (surfing, navigation, reading, photos and movies) for all the money, no complaints. And then I decided to sell my Acer Iconia Tab W501 and buy a Samsung Galaxy Tab 3 in the same form factor: 7 inches. I decided and bought. Like this:

I was attracted to it by a normal (Hallujah!) Micro USB input, well, how can I connect flash drives there, watch a movie from an external hard drive. Plus kawaii, more ergonomic than the second case, in general, a dream. Bought. The first thing I encountered was freezing. With active surfing, the tablet stuck tightly. Shit. Then troubles with games began: the good old carmageddon went with such graphical lags that it was a little crazy with amazement. But I was finally finished off by an attempt to teach the tablet to be friends with external media: card readers, flash drives and hard drives. As I wrote in the previous article on Tab 2 7.0, Android is a shitty, ugly Linux, which neither Orthodox NTFS nor the less Orthodox extFAT understands. This is treated by installing a special program: Paragon NTFS & HFS + (there are actually a lot of them, but I successfully use this one), which unfortunately requires root rights. I will not write here how to root the Galaxy Tab 3, w3bsit3-dns.com will help you.

In general, Root, Paragon, adapter "USB mother - microUSB dad", stick in a USB flash drive => horseradish. Nothing works. At first I thought that I was doing something wrong, and started smoking forums, and only then I howled in frustration:

there is no USB host on Samsung Galaxy Tab 3 7.0 !!!

He is not there, he does not see external devices. How many times have they told the world at first read forums, after buy. In principle, there is a solution to this problem. In order for a USB host to appear there, you need to install a custom kernel (see the "Firmware" spoiler) of the system, but at the time of September 2013 the only custom kernel BlackHawk on Tab 3 did not work (maybe it was fixed now, I don’t know). Anyway, this is Satanism, hemorrhoids and sex, with the risk of turning the tablet into a brick, costing more than 10 thousand rubles. Tell me, what kind of Korean idiot rushed to give birth to a tablet with a normal USB and without a host ?!

I spat on this business, and exchanged tablets with my wife taking her Samsung Galaxy Tab 2 7.0 like this:

There is a USB host on it. But a stupid proprietary Samsung connector. Fortunately, there are adapters from it to USB? for example like this:

Or like this:

The first IMHO is more convenient, as it does not touch the cover. In general, after root, the installation of the prog, the flash drives plugged into the adapter, lit up with a cheerful light. Win!

But the hard .... there is not enough power for the hard. Here you need either a hard drive with additional power from the adapter, or a movie for you. But a hard drive with an additional adapter is not a mobile solution, for some, sorry, even in the toilet there is no outlet, and even in the bus, or in the train ... and not everyone has a hard drive with an adapter, I generally hate them.

But of course there is a solution. Oddly enough, the simplest thing is to take a USB cable with an additional tail for power supply, let's say like this:

For many, I'm sure this shit is lying among the wires, like a memory of old external containers for hard drives. Naturally, the connector at all ends should not be miniUSB as in the picture, but a normal USB. Then the hard drive is stuck through the appropriate adapter (they now have microUSB, then USB 3.0, from some other garbage) into the cord through the adapter into the tablet, and power through the extension cable into the adapter and into the outlet. In the travel version, the power can be plugged into a battery, for example, in this one.

Built-in memory tablet and ultrabook is designed to host the operating system, as well as system applications and necessary utilities, it is enough to store applications and personal information (contact database, calendar, etc.).

It is assumed that the rest of the information - music, photos and videos - will be stored by the owner of the device on an external storage device. Most often, a memory card is used in this capacity. What if we turn to a portable hard drive?

What is the convenience of a portable hard drive

By connecting an external drive to your tablet or ultrabook, you can immediately solve the problem of storing large content. To put it simply, carry your entire collection of films with you.and music, accessing it when necessary and without bothering with a connection to a stationary PC.

It is convenient to move photos and videos to a 2.5-inch drive without spending the built-in memory of the gadget for them. In addition, the HDD can be used to transferdata between a tablet and a computer, print out photos on a printer, connect to a media center or Smart TV.

In addition to versatility, external hard drives are characterized by a favorable price per gigabyte of stored information and high capacity compared to flash cards and USB sticks.

On the other hand, the HDD is still significantly larger than their size, so it will take up more space in the bag (plus a USB cable).

And, importantly, it consumes a lot of electricity, so the built-in battery of the tablet / ultrabook will discharge much faster.

And HDD models with double USB tail will not start at all if your device has only one corresponding connector (they need two ports for power). And finally, it is more convenient to work with such a design, nevertheless, in stationary conditions.

Which portable hard drive to connect to an ultrabook / tablet

The benefits of purchasing an external HDD will be nullified if your tablet does not support USB connectivity. At a minimum, a USB host is required (you can check it in the user manual or on the manufacturer's website) - it will provide a keyboard connection,

mouse and other devices (the presence of such an option may indirectly indicatethat the host is). And here USB OTG cable(On-The-Go) will let the tablet know that an external device is connected to it (otherwise it will consider itself passive).

However, in each case, clarification is required, especially when it comes to Chinesenon-name products... Often, manufacturers solve this issue programmatically (the user himself chooses the mode of operation of the USB port) - then the presence of an OTG cable is optional.

Ultrabooks they do not have such a problem at all - the vast majority of them have USB ports operating in standard "computer" mode.

It is also important what file system is used on the external drive: standard tablets understand FAT32 (used on flash drives), and hard drives are often formatted in the more familiar Windows NTFS format - and here there may be nuances.

But any modern tablet with USB OTG support should recognize an external hard drive. However, if there really is a problem, you can format the latter in FAT32, although in this case the maximum volume of the volume will be 2 TB.

But nothing prevents you from creating multiple volumes, but you are unlikely to need external storage of such capacity - for most tasks, 1 TB is enough. Worse: the maximum file size supported by this file system is limited to 4 GB, so if you are looking for larger files, this is the solution is unusable.

You can also try formatting the drive to NFTS using the NFTS Mount application (remember to startyou will need root rights, so this option is not suitable for all devices, or you will have to seek help from specialists).

The third problem- power supply. As already mentioned, not every external drive will be able to start with power from a tablet, and once started, it will drain the built-in battery faster.

Try to connect the HDD periodically and for a short time, for example, to rewrite photos from a tablet or upload music. The movie is unlikely to come out.

Therefore, when purchasing an external drive, focus on "green" models (low-speed, but with energy-saving features).

Alternatively, buy a separate USB hub with external power - to it and connect a tablet with a hard drive (but you need be sure to check for compatibility).

conclusions

Connecting an external drive to a tablet / ultrabook is a good idea in all respects: if it has a large capacity (from a terabyte and above), many problems with storing and transferring media content are solved.

And if your tablet is equipped with a USB host - and it is completely pleasant, just after buying an HDD, check whether it will work with your model.

Text S. Gorotov

Modern devices, such as tablets, show images in Full HD quality, and they can record information in the same quality. Plus, there is the ability to play powerful, detailed games, listen to music that is now available in many different genres. But there is one point. For all these purposes, a lot of memory is needed. Where can I get it. One of the best options is to connect an external hard drive to your tablet. It can be a memory card, flash drive or external HDD. If there are no questions with a memory card, what should be done to connect an external HDD?

The overwhelming majority of manufacturers equip tablets with connectors for a memory card slot. This is often a micro SD card. And the memory on board the devices themselves continues to grow every year. Now there are already on the free sale tablets with internal memory (SSD) of 64 and even 120 GB. Although there are still companies that do not provide slots for micro SD in their devices, such companies include some Nexus devices, Apple with iPad tablets, etc. Here the user is content with the memory that the manufacturer installed on the tablet.

It does not matter whether or not it is possible to connect a memory card to a tablet, there will be moments in life when there will be little memory anyway. And there can be a lot of such situations: when going on vacation, I would like to take my favorite films with me; When you go to visit, you need to take photos from your vacation with you, but there is no time to put them on the tablet, etc. Therefore, the question arises - is it possible to increase the tablet's memory using an external drive?

Sure. And even a novice user can cope with this task. There are several ways to achieve the goal, we will discuss them further, and now let's see what is needed for this.

Connecting a flash drive, HDD disk to a tablet on any firmware

To do this, you need the tablet itself, which we want to connect to an external drive, a USB-OTG adapter (lanyard).

Method 1. If the tablet does not support OTG, which is of course a rarity

We take a regular micro USB-USB cable, connect one end to an external drive, and the other to a tablet, and wait about one or two minutes. We are waiting until a notification appears indicating that the gadget is preparing the storage device for work. If nothing happens, try the next option.

Method 2. You will need a micro USB-OTG cable or adapter

Micro USB-OTG is a special cable, thanks to which you can connect various external devices to the tablet for operation, such as a printer, wireless and wired mouse, wired keyboard, game joysticks, flash drives and, of course, HDD. It makes sense to buy it if the first method did not work or if there is a need to connect one of the above devices.

Such OTGs are of two types:

Most common: a cable that resembles a regular USB extension cable, but it differs in pin wiring.
An adapter resembling a flash drive, with the difference that at the end there is a slot for a regular USB input with specially wired contacts for the OTG standard.

Features of connecting an external hard drive

When buying an external HDD, it is worth remembering that it makes no sense to take a disk with a high speed or very large in volume, since such disks will require additional power, which can lead to a quick discharge of the tablet.

For some devices, it matters in which file system the information on the external device is NTFS or FAT32. Due to the fact that tablets work with the FAT32 format, some devices will not want to read information in the NTFS file system from a flash drive or HDD. If the information is written in FAT32 format, then there is no need to make additional settings in the device, after connecting the disk will be displayed as an additional storage device.

If the connection has occurred and the tablet sees the external device, but does not see the files in it, in this case, an application must be installed on the device that will allow you to see the previously unreadable format without problems.

And here there is also an important point: whether the ROOT tablet is right or not.

If there are no ROOT rights and will not be available in the near future, it is worth considering the option of purchasing paid software. Paid applications will allow you to enjoy all the delights of an external drive without jailbreaking your tablet. One such program that is available on Google Market is the Nexus Media Importer.

Well, if ROOT rights are already on the tablet, then in the Market we download any free file manager, such as Total Commander or ES Explorer. Then you can use all the files on the external device.

Having considered these tips, you will know how to connect an external hard drive or flash drive to the tablet and in the future, this should not cause you additional questions.

An external hard drive for an android tablet or smartphone is not a myth, but a reality. Mobile devices have become an integral part of our lives. Pocket gadgets can take photos in high resolution, no worse than large cameras, they shoot videos in FullHD, and flagships even in UltraHD. In general, a small device produces a lot of content that requires a lot of memory.

Despite this, manufacturers decided not to expand the memory, but on the contrary, in the latest models, they began to abandon the slot for external Flash memory. Perhaps this is due to the rapid development of cloud technologies, because when we first turn on the smartphone or create e-mail, so-called "cloud storage" is imposed on us.

But still, keep personal photos, videos and other important information more safely at hand on a USB flash drive or hard drive.

How to connect a hard drive to a tablet

Android devices have a microUSB connector, which means that you can connect another USB device to it. To do this, you need an adapter - OTG cable. You can buy it in almost any store that sells a variety of batteries, chargers, headphones, or in a supermarket of electronics and household appliances.

Why the tablet does not see the hard drive

With a simple connection using the OTG cable, you will notice that the phone does not see the external hard drive or displays a message that it is not supported. This is because it has a file system that Android does not work with.

Connecting an external hard drive to your tablet

But there is a solution. In the application store, you need to download the file manager Total Commander. It has a shareware exFAT / NTFS plugin. This plugin allows you to connect NTFS drives to Android absolutely free and has a free trial period for other file systems.

After the first connection of the hard drive to the Android tablet, grant the plug-in access to it, after which the plug-in will open automatically and the name of the external drive and the file system type will appear in the window. Next, you need to press the "Mount" button, after which the hard disk will be connected and become available.

This connection allows you to run even 4K movies. For information on where to find them, read the article: 4K content for UHD TV.

Connecting other devices using an OTG cable

In the same way, thanks to the OTG adapter, it will be possible to make friends with the phone a USB flash drive or a card reader if your smartphone does not have a slot for an additional flash card or you need to reset the footage from a photo or video camera.

As far as input devices are concerned, android supports most of them by default, without the need to install additional applications. So using the OTG cable, you can easily connect wired and even wireless keyboard and mouse.

And those who like to play on a smartphone will be happy to connect a gamepad. Read more about this in the article: DUALSHOCK 4 and PC.

So we found out if it is possible to connect an external hard drive to a smartphone using only an adapter.

indycraft.ru

How do I connect an external hard drive to my tablet?

It does not matter whether or not you can connect a memory card to a tablet, there will be moments in life when there will be little memory anyway. And there can be a lot of such situations: when going on vacation, I would like to take my favorite films with me; When you go to visit, you need to take photos from your vacation with you, and there is no time to put them on the tablet, etc. Therefore, the question arises - is it possible to increase the tablet's memory using an external drive?

Sure. And even a novice user can cope with this task. There are several ways to achieve the goal, we will discuss them further, and now let's see what is needed for this.

Connecting a flash drive, HDD disk to a tablet on any firmware

To do this, you need the tablet itself, which we want to connect to an external drive, a USB-OTG adapter (lanyard).

Method 1. If the tablet does not support OTG, which is of course a rarity

Method 2. You will need a micro USB-OTG cable or adapter

Such OTGs are of two types:

Most common: a cable that resembles a regular USB extension cable, but it differs in pin wiring.
An adapter resembling a flash drive, with the difference that at the end there is a slot for a regular USB input with specially wired contacts for the OTG standard.

Features of connecting an external hard drive

And here there is also an important point: whether the ROOT tablet is right or not.

Well, if ROOT rights are already on the tablet, then in the Market we download any free file manager, such as Total Commander or ES Explorer. Then you can use all the files on the external device.

Having considered these tips, you will know how to connect an external hard drive or flash drive to the tablet and in the future, this should not cause you additional questions.

rabota-na-planshete.ru

How to connect an external hard drive to your tablet

Modern tablets are capable of displaying Full HD video and recording in the same quality. Let's add the ability to play tens of thousands of musical compositions. More games: powerful, voluminous. There is one caveat. All this will take a lot of memory. So where can I get it? One option is to connect a third-party drive. It can be a USB flash drive or HDD. If everything is clear with the Flash Card, then how to connect an external hard drive to the tablet?

Almost all manufacturers supplement their devices with memory card slots. Most of them are MicroSD cards. And the internal memory of the devices themselves increases significantly. Already, there are MIDs that have onboard SSD drives with a volume of 64 and 120 GB. The situation is bad only with iPads, some Nexus devices, etc., in which there is no slot. The user has to be content with only the pre-installed memory.

It doesn't matter if you have the ability to increase memory or not, memory will run out all the time. Then a logical question arises - is it possible to connect an external hard drive to the tablet? The question may arise for other reasons as well. For example, when you need to drop a large number of various files, etc.

Naturally, you can. Moreover, even a novice user can handle it without any problems. There are several ways that we will discuss below, but first, let's figure out what we need.

What do we need

The device to which the HDD will be connected;

OTG-USB lanyard (adapter), if the gadget is without OTG support;

Option 1

Just connect the usual USB-USB cable HDD to the tablet and wait about 1-2 minutes. A notification should appear informing you that the device is preparing the drive for use. This is how it happens in almost all modern devices. If nothing happened, let's move on.

Option 2. Cord

The OTG-USB cable is a cable with an adapter. Due to the latter, the gadget can work with a variety of devices from the outside - a keyboard and mouse, a printer and, of course, with an HDD. You need to buy it if your first option did not pass or you just know for sure that there is no OTG support on the tablet.

The adapter itself is soldered into the lace. Nowadays, adapters without a wire are gaining popularity. They look like a flash drive, only at the end there is a USB input for a regular cable.

An external hard drive for a tablet is not worth buying with a high speed. For you, the main factor is volume. However, one should not forget about energy efficiency. If you take a hard drive to places where it is difficult to recharge the device, then the choice should fall on the SSD-drive, but there the price will bite. You decide.

By the way, you can make an external drive yourself. Just buy a 2.5 '' or 3.5 '' pocket (depending on the type of HDD) and insert the hard one. Pay attention to nutrition. It doesn't have to be external, otherwise it will tie you to the outlet.

Option 3. Applications

There is a simpler option. The connection itself is carried out with a regular cable, but in order for everything to work, you need to buy Nexus Media Importer software on Google Play for $ 3. Do not be alarmed by the fact that the name contains the word Nexus - the application will work on other devices, and the problem itself is solved. It's cheaper than buying wires, but you won't be able to touch it with your hands. Remember that having paid once, you can always install applications on your other devices, simply by logging into your account.

Option 4. Economical

Yes, I don’t want to give money. Fortunately, there is an application (free) StickMount, but its operation is possible if only you have already received ROOT rights to your gadget. If this is not a problem for you, or if they are, then everything is in order. Move on. Download any file manager. For example, ES Explorer.

Next, give StickMount the appropriate rights and access. Well, when the HDD is connected, a message about the successful connection of the disk will appear in the notification area. There you will also see the address where you will need to search for your data - / sdcard / usbStorage.

Well, now we need a guide. Go to the root folder and follow the above address. As you can see, connecting an external hard drive to a tablet is not such a difficult task. We hope that after the described 4 methods you have no more questions left. Use your hard drive like a regular USB flash drive.

How to connect an external hard drive to your tablet: Video

It's easy to thank - click on any of the social media buttons

kingdia.com

How do I connect an external hard drive to my tablet?

Connecting an external hard drive to an android device is carried out with an ordinary usb cable with a "tablet" - an adapter to which it is connected. On most devices, it works like this:

connect the cord with the adapter to the device and the disk;
wait a few minutes for the tablet to recognize and prepare it;
in the file manager we find the connected device.

If the above steps did not help, then we use the OTG-USB cable, which is an adapter to which, in addition to an external hard drive, you can connect other devices, for example, a mouse.

It works in the same way - after connecting, the phone or tablet will find a new device and it will be possible to use it.

askandroid.ru

There is never too much space: connecting a hard drive to a tablet

In the life of almost every owner of a tablet computer, sooner or later a moment comes when he is faced with the question - how to connect a hard drive to a tablet? Despite the fact that every year the amount of internal memory in gadgets is increasing, and the presence of a microSD format slot allows you to expand it even more, there are still situations when you need to connect an external data carrier to the device. For example, you have pumped up movies for your trip, but forgot to download them to a memory card or tablet. Or you urgently need to dump some kind of data array from a colleague's hard drive, but you don't have a laptop or PC at hand. In such cases, we recommend that you use this guide.

Following the instructions, you will be able to connect the hard drive to the tablet.

How to choose a drive

By the way, it is worth saying a few words about how to choose an external hard drive for your tablet. Of course, you can connect a flash drive and cards of various formats through a card reader, but the best option is to connect a hard laptop 2.5 ″ form factor (HDD of a standard size will also work in most cases, but often they need additional power, so this kind the solution can hardly be called mobile and portable). You can also build your own external storage by purchasing a separate 2.5 ″ pocket and a hard drive or SSD of the required capacity.

So, the first step is to find out if your tablet supports work with peripherals via the OTG protocol. If so, then all you need is to connect the gadget to the external drive with the appropriate cable and wait a couple of minutes until the system determines that external storage has been added to it. Most modern devices are able to do this "out of the box", for those whose tablets do not have this useful property, there is also a way out, even several.

Method 1. OTG adapter

You will need to buy a special OTG cable with a built-in corresponding adapter, which will be responsible for transferring data between the tablet and an external drive. After that, connecting the hard drive to the tablet is as easy as shelling pears - the process is no different from the above.

Method 2. Software

There are two options here - the budget one and the one where you have to spend a little:

Purchase of the Nexus Media Importer app on Google Play (three dollars). Despite its name, the utility works not only with Nexus products. The application takes over the functions of the same OTG adapter and is usually cheaper. In addition, you can lose the adapter or, for example, forget, and you can always download the utility to an unlimited number of devices - just log into the Google application store under your account.
A more budget-friendly option is the StickMount app. It's completely free, but requires root access. So, if you are ready to understand the intricacies of getting root for the sake of economy (some manufacturers provide this option out of the box), then this is your choice. After connecting the drive, a message will appear in the notification curtain that the device is mounted and accessible via a certain path, most often - / sdcard / usbStorage.

After that, all that remains is to install any ES Commander file manager, some of the GO products or any other, of which there is a huge amount in the Google Play store (in varying degrees of functionality).

We hope that now the issue of connecting the HDD to the tablet will not take you by surprise. Expand the memory of your favorite gadgets and stay with us!

Whether it's a desktop, mobile or tablet, you'll find the right storage model for every device with the maximum capacity and performance in this article.

CHIP has tested 45 hard drive models for tablet, laptop and desktop Despite the availability of cloud storage and streaming services, the need to continually increase the number of gigabytes in PCs and laptops is not disappearing. High-definition videos, new photos and an ever-growing music collection are the source of disk space problems. Fast solid-state drives are not able to solve them, since with capacities of more than 500 GB, the cost of such solutions is unreasonably high. Remains only external and internal media on hard magnetic disks.

Before buying, you need to decide on the volume of the drive. If you are sure that one or two terabytes will be enough for you, you can purchase a 2.5-inch HDD. If you need storage up to 4TB, then you will have to choose from the 3.5-inch models. To determine which of the disks is the best in its category, the data given in the tables will help you. Before purchasing a drive, carefully review your system configuration: when using drives larger than 2TB, you may encounter hardware or system limitations on media capacity. We'll show you how to get around them and use all the available disk space.

Recently, tablets have become very popular. But they have little internal memory. A new type of external hard drives will help expand the possibilities for storing multimedia files. They connect to your home network or directly to your mobile
device wirelessly. We've checked which drive is best for this.

Wireless hard drives

Small mobile drives provide smartphones and tablets with up to 1TB of additional storage space.

The new drives with an integrated WLAN module fit in the pocket of any jacket, and even more so in a bag or backpack. They weigh less than 500g. Ideal for smartphones and tablets, they eliminate space constraints by providing up to a terabyte of additional storage capacity. Mobile devices automatically connect to the drive wirelessly, so your collection of photos, movies, and music is always at your fingertips. Tablets and smartphones access the drive through a dedicated app provided by each manufacturer for iOS and Android systems.

Insufficiently successful implementation

Wireless drives make a good impression, but in practice it turned out that all tested devices in some cases demonstrate unforgivable shortcomings. So, the winner of the Seagate Wireless Plus test, for some unknown reason, does not provide the ability to create an encrypted wireless connection. However, for the rest there are practically no complaints about it. It is the only wireless drive that has a built-in DLNA server, with which it can provide multimedia content to all DLNA-enabled devices on your home network. In addition, in terms of data transfer speed, this device is ahead of its competitors: 4 MB / s, of course, is not a record, but it is quite enough for watching 1080p movies. Other drives do a little worse with this. The main outsider here is the Transcend solution. In a miniature HDD case, an antenna is installed so small that it is not possible to broadcast HD video, and for transferring data from a PC to other devices, it is equipped only with a USB 2.0 port. Products from Buffalo and Patriot inexplicably interfere with the wireless transfer of data from a mobile device to a disk, which is also a very annoying circumstance.

In detail: the drive on the network

Disk management from a smartphone or tablet The exchange of information with the wireless storage device is carried out by means of software. The Media App utility for the Seagate Wireless Plus turned out to be successful in terms of appearance and functionality (1). In the Spartan spirit, the Transcend StoreJet Cloud disk program, in which the encryption of the wireless connection must be manually activated (2), is kept.

Play movies, music and photos from PC The best way to copy data from your computer to your wireless hard drive is via a USB cable. V this case the differences in transfer rates between individual drives are negligible. An obvious outsider is the only model from Transcend with a USB 2.0 interface.