Devices for the search and diagnosis of biologically active points. DIY electroacupuncture device Device for finding biologically active points

The package includes a computer program "Atlas of acupuncture points" and the book "Healing with acupressure: acupuncture without needles" (by F. Houston)

Price: 2 800 rub. Free shipping across Russia. Payment upon receipt by mail. Buy

Appointment

The Poisk-02 apparatus is used to find the location of the center of a biologically active point (BAP), as well as to influence BAP with weak impulses of low-frequency electric current or mechanical stimulation (pressure) of low intensity.

The use of the Poisk-02 apparatus is an extremely effective and simple method of providing first aid to oneself, as well as a method of self-healing. The generally recognized method of acupuncture in this case is available to non-professionals, since it does not require the use of needles, and the finding of the required point is provided by the apparatus. The method can be used at any time of the day with minimal effort and no material costs.

At the same time, the Poisk-02 device can be used by specialists - doctors to provide medical care in a hospital and on an outpatient basis.

Features of use

Using the Poisk-02 apparatus is extremely simple: when the probe moves along the body surface as it moves away from the center of the biologically active point, the indicator LED blinks more and more rarely (up to complete disappearance), and when it hits the center of the BAP, a continuous glow appears.

In the "Search-02" apparatus, an intermittent sound signal sounds simultaneously with the blinking of the indicator light. The presence of a sound signal is indispensable in cases when a person independently uses the apparatus when working with points on the head, back, etc., when it is not possible to observe the light indicator.

After finding the necessary biologically active point, without changing the location of the probe, the point is treated with weak impulses of low frequency electric current, as well as acupressure (pressing the probe). In this case, the electric current flows through the point automatically, no switching between the therapy mode and the point finding mode is required.

Additional benefits

During therapy with the "Poisk-02" apparatus, a weak electric current flows through the biologically active point. Unlike other electroreflexotherapy devices that generate mostly "rough" rectangular electric current pulses, the parameters of the Poisk-02 apparatus are close to the natural biological flow of a person, as a result of which the effectiveness of the procedures is much higher compared to other devices, there are no possible negative consequences ...

The set of delivery of the Poisk-02 apparatus includes the book "Healing with the help of acupressure: acupuncture without needles" (by F. Houston), which contains recommendations for the prevention and treatment of more than 400 diseases and ailments.

The set of delivery of the Poisk-02 apparatus includes a computer program "Atlas of acupuncture points", designed to promptly obtain information on the localization and therapeutic indications of acupuncture points. The atlas contains over 700 acupuncture points. It is possible to search for points by anatomical region, picture, name, index.

The Poisk-02 apparatus can be used simultaneously with traditional reflexology and diagnostics sessions, including acupuncture, Su-Jok, auriculotherapy, Voll and Nakatani diagnostics, etc.

The device is small in size, safe, easy to operate, has a convenient ballpoint pen shape.

The device is powered by two standard, easily replaceable batteries.

The body of the device and the probe electrode are made of medical stainless steel, a special hygienically clean material that is safe for human skin. No skin damage occurs during therapy with this device; the device is also applicable for the treatment of children and people with hypersensitivity of the skin.

Unlike many similar devices, the Poisk-02 apparatus allows to remove accumulated static electricity, which complicates diagnostics.

Warranty for the device "Poisk-02": 1 year; post-warranty service; average service life: at least 5 years.

Specifications

Batteries: two elements 393 A GOST 28125-89 (IEC 86-2-87);

Supply voltage: no more than 3 V;

Current consumption in storage mode: no more than 1 μA;

Operating time of the device from one set of batteries: at least a month with daily operation no more than 40 minutes;

Light and sound indication;

Overall dimensions: length: 135 mm; diameter: 16 mm; conductive probe diameter: 1.0 + - 0.1 mm;

Weight: no more than 100 g.

Indications for use... The Poisk-02 apparatus is most effective in the treatment of functional diseases associated with small organic changes. Due to the obvious efficiency, absence of side effects, simplicity, availability and high cost-effectiveness of treatment, the use of the Poisk-02 apparatus is indicated for almost all areas of medicine:

Neurology, psychiatry:
alcoholism, insomnia, hypersomnia, headache, dizziness, depression, lumbago, sciatica, neuralgia, neurasthenia, neuritis, obsessive-compulsive disorder, memory impairment, polyneuritis, reactive psychosis, sciatica (chest, lumbosacral), sleep disorders, mental disorders, epilepsy.

Pulmonology, phthisiology:
bronchial asthma, bronchitis, cough, pleurisy, pneumonia, pulmonary emphysema.

Cardiology:
arterial hypertension, arterial hypotension, arrhythmias, myocarditis, Raynaud's disease, angina pectoris, paroxysmal tachycardia, extrasystole, obliterating endarteritis, rheumatic heart disease.

Gastroenterology:
stomach atony, gastritis, gatroduodenitis, bile duct dyskinesia, dyspepsia, gastroenteritis (acute), hepatitis, cholelithiasis, chronic constipation, heartburn, hiccups, colitis, flatulence, intestinal obstruction, obesity, gastric emptying, belching, chronic intestinal pancreatitis , chronic diarrhea, vomiting, spasms of the stomach and esophagus, cholecystitis, enteritis, enterocolitis, peptic ulcer.

Surgery:
prolapse of the rectum, skin gangrene, hemorrhoids, mastitis, carbuncle, erysipelas, anal fissure, phlegmon.

Arthrology, traumatology:
arthralgia, rheumatoid arthritis, arthrosis, pain in the lower leg, ankle joint, hand, knee joint, elbow joint, pubic joint, wrist joint, neck region, shoulder joint, spine, foot, dislocations, osteomalacia, bursitis, periarthritis, ligamentous ligamentous expansion syndrome of noise and friction in the joints, synovitis, thickening of the spine.

Ophthalmology:
astigmatism, optic nerve atrophy, blepharitis, blepharospasm, myopia, glaucoma, hyperopia, keratitis, conjunctivitis, strabismus, optic neuritis, thermal eye burn, decreased twilight vision, recurrent retinal peripheral artery, central retinitis, retinitis, spinal cord.

Otorhinolaryngology:
anosmia, laryngitis, nosebleeds, otitis media, rhinitis, sinusitis, tonsillitis, tubo-otitis, hearing loss, pharyngitis, tinnitus, Meniere's disease, edema of the uvula of the soft palate, hoarseness.

Endocrinology:
gynecomastia, hypothyroidism, pituitary cachexia, pituitary insufficiency, diabetes, dysregulation of the endocrine glands, thyrotoxicosis.

Infectious diseases:
chickenpox, hepatitis, influenza, dysentery, whooping cough, malaria, mumps epidemic.

Dentistry:
arthritis of the temporomandibular joint, gingivitis, glossitis, toothache, trigeminal neuralgia, periodontal disease, chronic parenchymal parotitis, periodontitis, chronic interstitial sialodenitis, syndrome of painful dysfunction of the temporomandibular joint, stomatitis.

Urology:
hematuria, impotence, ischuria, urinary incontinence, acute nephritis, nephropathy, orchitis, pyelonephritis, pollakiuria, kidney stones, prostatitis, urethritis, cystitis.

V. SCHERBATYUK, B. LISENKOV, Minsk.

Search for biologically active points

All this began much earlier than historical materialism appeared. And it began, it seems, in China. It follows from Chinese sources that all energy human body system ka consists of 12 doubles

(main) and 2 unpaired meridians, which unite special points of active influence. For example, the location of these points on the chest and abdomen is shown in Fig. 1.

There are branches from each meridian to the corresponding organs, and inside the body, all the internal passages of the meridians form a single energy channel from their plexuses. On the surface of the skin, there are connecting channels between pairs of meridians (kolatali). Unpaired meridians at the exit (from inside the body) and at the entrance (inward) form annular collaterals.

Doctors of the ancient East created a coherent theory according to which points located on the meridians act as "vents" for absorbing and releasing energy.

Classical Chinese atlases contain descriptions of about 700 points. To date, a significant number of points located outside the meridians have been identified. In China, to accurately determine the points, the so-called "individual cun" is used - the distance formed between the folds of the skin on the middle phalanx when the third finger is bent (in men - on the left hand, in women - on the right). This is possible, of course, only taking into account the thousand-year experience that has been accumulated in China.

What does a biologically active point (BAP) look like? This "point" can be up to 0.5 mm2. Outwardly, it is indistinguishable from the surrounding skin.

When palpating in the area of the point, you can sometimes find a fossa, compaction or rarefaction of the tissue and often soreness is felt. Pressure pain is one of the signs that the point is found correctly.

The impact on the points changes their performance and causes a healing effect. It is also noticed that this also changes the indicators of other points of this meridian, which confirms its existence. By character-

The term of the BAP response reaction is divided into points of general and local action. The points of general action are located mainly on the arms and legs and have stimulating and normalizing properties. except

Moreover, these points affect the corresponding internal organs (Fig. 2).

Local action points are located close to the corresponding part of the body and affect it.

At the current level of research, no pronounced differences in the structure of the point and surrounding tissues have been revealed. The only feature was found when exposed to a weak direct current: in the area of the point, the electrocutaneous resistance is sharply reduced, that is, there is a kind of "hole" for the passage of current. The magnitude of the electrocutaneous resistance depends on the functional state of the point and the organ associated with it.

The diagnostic capabilities are based on this.

Dr. R. Voll was the first to make such an attempt. His methodology was built on the fusion of the foundations of classical Chinese acupuncture, homeopathy and modern empirical concepts. Studies have shown that there are many more nerve endings in the locations of biologically active points on the skin. Dr. Voll began measuring electrical potentials on people's skin.

It is believed that the first device for measuring the electrical potential of the skin was designed by Voll in collaboration with the engineer Werner in 1953.

Carrying out research, Voll in the "magic" Chinese points found the values of the potentials, different from the potentials of the sites located very close.

The results of the experiments showed that the locations of the BAP are clearly determined by electrical methods, which ensure high accuracy and reliability of finding the BAP. The applied technique is practically safe if the current passed through the human skin does not exceed tens of microamperes.

The inevitable electrolysis distorts the real picture of the BAP state. One of the first devices for determining the location of BAPs on the human body was a high-resistance ohmmeter, which measured the resistance of points on the skin.

Two schemes of devices for finding acupuncture points are given in. These devices use a search for points by their conductivity. At the acupuncture points, a relatively low electrical resistance is observed, recorded over an area of about 2 mm: and equal to approximately 800 kΩ, and already at a distance of 2 mm from this point, the resistance increases to approximately 1.4 MΩ. Real

values may differ from indicated by ± 20%.

The "Bio-search" device (Fig. 3) is made on the K561J1A7 microcircuit.

On the element DD1 1 a threshold element is made, and on the elements DD1.2, DD1.3 - a generator that controls the operation of the indication. LED AL307 and a small-sized loudspeaker such as DEMSH or TM-2 are used as indicators.

The passive electrode ("Bracelet") and the active ("Probe") must be made of brass. The name "Bracelet" remained from similar devices of the old model, in which the passive electrode was actually made in the form of a bracelet. In new devices, the passive electrode is made in the form of a brass tube with a diameter of 10 ... 30 mm and a length of about 150 mm, to which a wire is soldered from the inside to connect to the device.

The active electrode is a piece of brass rod or thick brass wire 0.3 mm and 120 mm long, to which a connecting wire is also soldered. The nib is inserted into any plastic or wooden tube (the body of the pen from which the nib is removed will do). The front, working part of the stylus, protruding from the fountain pen to a length of about 10 mm, should be rounded and well ground.

When setting up the device, it is necessary to adjust the threshold element DD1.1, for which the resistor R2 is selected in such a way that the device indication works confidently when the resistance between the probe and the bracelet drops to about 800 kOhm.

When searching for acupuncture points, you need to smoothly, without pressure, drive the probe over the skin (like a pencil on paper), holding the bracelet in the other hand. For a trial search for BAP, you can try to drive the probe along the outer side of the hand.

The points located near the nails of each of the fingers are usually easily detected with this device.

The device "Micro-ELAP" (Fig. 4) can be used both in the search mode for acupuncture points and in the treatment mode.

You need to feed "Micro-ELAP" only from rechargeable batteries or batteries. This device cannot be powered from the mains, even through a transformer! Switch S2 sets the positive or negative polarity of the probe (active electrode) relative to the bracelet.

"Micro-ELAP" has a pointer and sound indication. On the elements DD1.1, DD1.2, a generator is made to search for points with a pulse signal. The generator on the elements DD1.3, DD1.4 is used for indication. Pulse signal frequency - in the range of 0.9 ... 10 Hz. When searching, when the probe hits the acupuncture point, there is a sharp decrease in resistance between the bracelet and the probe. This is with-

leads to the fact that a high level is sent to the control input of the sound generator, assembled on the elements DD1.3, DD1.4, allowing its operation.

It is advisable to adjust the device so that the current through the pointer indicator PA1 does not exceed 15 μA (a microammeter with a full deflection current of 100 μA is used).

If the device is used only for finding points, then you can take a 50 μA microammeter.

A simple device for finding BAP is given in. The active point search unit (Fig. 5) is made on three transistors VT1 ... VT3 and LED VD1

The search circuit is a comparator amplifier. When the electrode hits the active point, the LED lights up and a slight tingling sensation is felt. The device can also be used to influence BAP with low-frequency electrical impulses, which in some cases has a therapeutic effect. Switch S2 connects a pulse generator made on a DD1 microcircuit. Switch S1 changes the polarity of the current acting on the point, as a result of which the nerve channel is inhibited or excited.

The device has the dimensions of a toothbrush case with a search electrode in the form of a rounded needle 1 mm in diameter. The second electrode ("mass") is made from a section of a telescopic antenna and is connected to the device through a wire about 1 m long. When searching for an active point, this electrode is clamped in the hand. Switches S1, S2 are made of paired microswitches. Two handles of variable resistors are installed on the body of the device: R2 - "Exposure current" and R8 - "Exposure frequency", with a graduated scale. The "Krona" battery is used as a power source. To check the device in the "Search" mode, set the maximum exposure current and short-circuit the electrodes.

In this case, the LED should light up.

To search for BAP, we offer our own design, which uses double signal conversion (Fig. 6).

Using the variable resistor RP1, the required level of the probing signal is set, which is fed to the input of the first balanced modulator, made on the operational amplifier DA1.2 and the field-effect transistor VT1. The control input of the balanced modulator is connected to the output of the control generator on the DA1.1 op-amp. The generator periodically switches the polarity of the output voltage of the balanced modulator, turning it into an alternating one, but at the same time keeping its amplitude. ) and the input of the operational amplifier DA1.3. To protect DA1.3 from failure when a high potential hits its input, protection on diodes VD2 and VD3 is introduced into the circuit.

The signal level at the DA1.3 input is proportional to the resistance at the point of contact of the probe with the patient's skin. This allows, by evaluating the signal strength, to find the location of the BAP. However, in view of the fact that the probe is included in a high-resistance circuit, and the magnitude of the probing signal is comparable to the magnitude of possible interference (for example, interference from a 50 Hz network), it is advisable to use a synchronous detector for signal processing. A balanced modulator based on a DA1.4 microcircuit and a VT2 field-effect transistor is used as a synchronous detector. The control input of the balanced modulator (the gate of the transistor VT2) is connected to the generator output on DA1.1, as well as the control input of the balanced modulator on DA1.2. Thus, the first balanced modulator on DA1.2 performs signal modulation, and demodulation (synchronous detection) - a balanced modulator on DA1.3. Figure 7a shows the waveform at the input of the synchronous detector, and Figure 7b - at its output.

acupuncture. - M .: Tehart, 1993.

4. Radio amateur, 1999, No. 7, P.21.

5. Radio amateur, 1997, No. 2, P.26

← + Ctrl + →

Locating active points on the body

It is useful to divide all biologically active points on the human body into two uneven groups.

1. Special biologically active points, there are seven of them: OT1, OT2, OT3, OT4, OT5, OT6 and OT7.

2. All other biologically active points, tens of thousands of them.

Practice has shown: the first sessions of therapy with stones, minerals and crystals are always associated with the impact on special biologically active points (OT1 - OT7). This allows you to restore the sensitivity of sensory cells at specific points. In esoteric literature there is such a term - "closure of the chakras." In my opinion, it corresponds to the concept of "violation of the sensitivity of the sensory cells of specific points." Their restoration is the first step towards healing the body.

Using Figure 62, the approximate location of the special points is determined.

In Figure 62, the singular points (OT1 - OT7) are designated by numbers: 1, 2, 3, 4, 5, 6 and 7. Four of them are located near the navel. So, point OT1 is two palms lower, point OT2 is one palm lower, point OT3 is one palm higher, point OT4 is two palms above the navel. The OT5 point is located on the neck in the groove, the OT6 point is on the head between the eyebrows, the OT7 point is in the region of the crown.

The exact location of special points on the human body is determined using a pendulum and a system of special questions (method M4).

1. A finger or a felt-tip pen must be installed on the selected point of the body according to the diagram (Fig. 62). For example, we need to determine the exact location of OT3. Place your finger in the center of symmetry of the body, one palm above the navel.

2. Take the pendulum in your other hand and ask the first question: "Is your finger set to point OT3?" If the answer is yes, then the finger has correctly identified the desired point.

3. If the answer to question 2 is no, ask one of four questions:

... "Move up?";

... "Move down?";

... "Move to the right?";

... "Move left?"

4. Depending on which of the four questions received an affirmative answer, move your finger up, down, right or left.

5. After each finger shift, ask the first question again: "Is the finger on the OT3 point?" If the answer is yes, then everything is in order. If negative, then repeat steps 3, 4 and 5 until the answer is “Yes”.

6. Place your finger on the next special point and repeat steps 2, 3, 4, 5.

7. Found on the body special points can be marked with a felt-tip pen, so as not to determine their location every day.

To find the location of all other biologically active points required for a therapy session, a pendulum is used (method M5).

1. Take the pendulum in your hand and determine the part of the body on which the point is located using the following questions:

... "Is the point on the head?" - or briefly: "On the head?";

... "Is the point on the torso?" - or briefly: “On the torso?”;

... "Is the point on the hands?" - or briefly: “On your hands?”;

... "Is the point on the legs?" - or briefly: "On your feet?"

2. According to the positive answer of the pendulum to one of the four questions, you will determine the area of the body where the biologically active point is located. For example, the answer "Yes" was received to the question "Is the point located on the body?" This means that the desired point is on the body - on the front of it or on the back. My practice has shown that all biologically active points with which I worked were located on the front surface of the body. But in general, you need to clarify this with an additional question: "Is the point on the body located in front?"

3. When you have identified the body part on which the biologically active point is located, touch it with the edge of your palm and ask a series of questions. Let's look at the following example. Place the edge of your palm at the level of your navel and ask one of two questions: "Is the point lower?" or "Is the point higher?"

4. If the question: "Is the point below?" - received a positive answer, shift the edge of the palm below the navel (the offset step is arbitrary, for example, 5 centimeters down). If the answer is "Yes" to the question: "Is the point higher?", Move the edge of the palm up.

5. After shifting the palm, ask one of two questions again: "Is the point below?" or "Is the point higher?"

6. Repeat steps 4 and 5 until both questions "Is the point below?" or "Is the point higher?" you will not get negative answers. This will determine the horizontal level for the point. Now you need to find out where on the horizontal level it is located.

7. To do this, instead of your palm, place your finger on the found horizontal level and ask one of the following questions: "Is the point to the right?" or "Is the point to the left?" Depending on the answer received, move your finger to the right or left (the offset step is arbitrary, for example, 5 centimeters).

8. After sliding your finger to the right or left, ask one of the following questions again: "Is the point to the right?" or "Is the point to the left?"

9. Repeat steps 7 and 8 until both questions "Is the point to the right?" and "Point to the left?" you will not get negative answers. This means that the point is located under the finger. This is how the exact location of the biologically active point is determined.

10. You can ask a security question: "Point under your finger?" If the answer is yes, you have correctly identified the location of the biologically active point. If negative, its location should be clarified using the following system of questions:

... "Move up?";

... "Move down?";

... "Move to the right?";

... "Move left?"

11. Depending on which of the four questions you get an affirmative answer, slide your finger up, down, right, or left.

12. After each finger shift, ask the first question again: "What is the point under the finger?"

13. Repeat steps 10, 11 and 12 until all four questions “Move up?”, “Move down?”, “Move right?”, “Move left?” will not receive negative answers or to the question: "Point under your finger?" - the pendulum will answer "Yes".

14. When determining a biologically active point on other parts of the body, follow the steps described in paragraphs 3 to 13.

To find biologically active points (BAP), you can apply the binding method - for example, to special points OT1 - OT7, by asking the following series of questions (method M6).

1. "Is the BAP near specific points?"

2. If the answer is yes, ask the following seven questions:

3. In accordance with the answer "Yes", a list of special points is formed, in the area of which biologically active points necessary for therapy are located. In our example, these are points OT4 and OT5.

4. After identifying the anchor point, determine the BAP offsets from the singular point by asking the following four questions:

... "BAT to the left?" (for example, "No");

... "BAT to the right?" (for example, "Yes");

... "BAT is lower?" (for example, "Yes");

... "BAT higher?" (for example, "No").

Positive answers to the questions determine the direction of the BAP displacement from the singular point. In our example, the BAP is located to the right and below.

5. To determine the value of the BAP displacement from the singular point, ask a series of questions indicating the displacement value, for example, in millimeters. For our example:

... "BAT is 10 mm more to the right?" (for example, "No");

... "BAT is 15 mm to the right?" (for example, "No", but the amplitude of the pendulum's movement increased).

An increase in the amplitude of movement of the pendulum indicates that the displacement of the BAP to the right is less than 15 mm. If its amplitude when answering the second question decreases in comparison with the answer to the first, this indicates that the BAP displacement to the right is greater than 15 mm. By changing the numerical value of the displacement value in the question being asked, you can determine exactly how many millimeters the BAP is displaced from the singular point.

6. By analogy with the actions described in paragraph 5, determine the displacement of the BAP in the direction above the singular point.

Any point of the body can be used as an anchor point for finding the BAP. For example, when determining the location of the BAP on the legs, it can be tied to the hip or knee joint, to the foot. When the BAP is on the hands - to the shoulder, elbow, palm.

Several active points may be required for a therapy session. As practice shows, groups of points of interest for a specific job are located close to each other. When the first biologically active point is determined, the location of the rest can be tied to it (BAP1), taking it as the basic one (method M7). To determine the location of the second BAP, the following four questions are asked:

2. Based on the results of the answers to the questions, the direction of displacement of the second BAP relative to the first is determined.

3. To find out the value of the offset BAT2 from BAT1, ask a system of questions indicating the numerical value of the offset in millimeters, by analogy with paragraph 5 of methodology M6.

4. If a third biologically active point (BAP3) is required for therapy, then its location must be tied to BAP2, and so on for all other points involved in a particular work.

← + Ctrl + →
Working with stones, minerals and crystalsPositioning a vibration source on a biologically active point of the body

Below, two simple schemes of devices for finding acupuncture (biologically active) points of a person are proposed. These devices use the search for points by their conductivity (resistance). In acupuncture points, a relatively low electrical resistance is observed, recorded over an area of about 2 mm2 and equal to approximately 800 kΩ and below, and already at a distance of 2 mm from this point, the resistance increases to approximately 1.4 MΩ. The actual resistance values may fluctuate from those indicated by ± 20%.

Increased pain sensitivity is also characteristic of acupuncture points.

Bio-search device(Fig. 1) is made on the K561LA7 microcircuit. On element DD1.1 a threshold element is made, on elements DD1.2, DD1.3 - a generator that controls the operation of the indication. LED AL307 and a small-sized loudspeaker such as DEMSH or TM-2 are used as indicators.

Passive electrode ("Bracelet") and active ("Probe") must be made of brass. The name "Bracelet" remained from similar devices of the old model, in which the passive electrode was actually made in the form of a bracelet. In new devices, the passive electrode is made in the form of a brass tube 01 ... 3 cm and 15 cm long, to which a wire is soldered from the inside to connect to the device.

Active electrode- a piece of brass rod or thick brass wire 03 mm and 12 cm long. It is inserted into any plastic or wooden tube (the body of the pen, from which the writing rod is removed, will do). A connecting wire is also soldered to the probe. The front, working part of the stylus, protruding from the fountain pen to a length of about 1 cm, should be rounded and well ground.

When searching for acupuncture points, you need to smoothly, without pressure, drive the probe over the skin - like a pencil on paper, holding the bracelet in the other hand. For a trial search of points, you can try to drive the probe along the outside of the hand. The points located near the nails of each of the fingers are usually easily detected with this device.

Micro-ELAP device(Fig. 2) can be used both in the search mode for acupuncture points and in the treatment mode. You need to feed "Micro-ELAP" only from rechargeable batteries or batteries. This device cannot be powered from the mains, even through a transformer! Switch S2 sets the positive or negative polarity of the probe (active electrode) relative to the bracelet (passive).

Micro-ELAP device has a pointer and sound indication. On the elements DD1.1, DD1.2, a generator is made to search for points with a pulse signal. The generator on the elements DD1.3, DD1.4 is used for indication. Pulse signal frequency in the range 0.9 ... 10 Hz. When searching, when the probe hits the acupuncture point, there is a sharp decrease in resistance between the bracelet and the probe. This leads to the fact that a high level is sent to the control input of the sound generator, assembled on the elements DD1.3, DD1.4, allowing its operation.

It is desirable to adjust the device so that the current through the pointer indicator PA1 does not exceed 15 μA. The Micro-ELAP device uses a microammeter with a 100 µA full deviation drain. If the device is used only in the point search mode, then a 50 μA microammeter can be used. For a more detailed acquaintance with electro-acupuncture, it is advisable to familiarize yourself with special literature, for example, p.

Literature

1. Voll R. Topographic position of measurement points during electro-acupuncture. - M .: Techart, 1993.

Radio amateur 7, 1999

SHARE WITH FRIENDS

P O P U L R N O E:

I live in an area where the tap water is very hard. I was tortured every month to pick out scale from the kettle, to clean the heating element of the washing machine. A gas boiler with a column is still remembered in a nightmare. What to do? The Internet at that time was just in its infancy and I remembered the knowledge I had gained in Baumanka - to re-magnetize water, to make it soft. I assembled a magnetic filter for the water supply system, installed it at the water inlet to the room and ... the problem of scale disappeared. A small sediment in the kettle is easily washed off with water, I have not looked into a gas boiler or washing machine for many years.

(+18) Vodka is becoming more expensive and its quality is often in doubt. Therefore, sometimes (on a holiday) you want to treat guests to a drink that is safe for your health. You can buy a moonshine still, or you can do it yourself from scrap materials. A detailed description of the design of the moonshine still with drawings is further in the article.

The article is intended for individuals not younger than 18 years old !!!

The properties of the skin as a regulator of various physiological functions of the body have been known for a very long time. Various moxibustion, massages, baths, banks have been successfully used to treat various diseases since ancient times.

At the same time, it was noticed that the reactions of the body, depending on the place of exposure, can be different due to the peculiarities of the human nervous system.

Popularity: 12,258 views