Automatic setting of sufd. For the correct operation of sufd, it is necessary
You need to set up for signing
SUFD SETUP
What do we need to install and configure SUFD?
Firstly, you must have Crypto PRO installed and (with a valid certificate through which you will connect to the access server with subsequent authorization in personal account SUFD via login and password in the browser).
Setting up Java.
1. Go to Control Panel - Java - Update, uncheck the box and reply to the message that appears.
2. On the "Security" tab, click the button.
3. From the drop-down list at the top, select "Signer CA", then click on the button and specify the file " " (valid from 11/14/2018 to 11/13/2023 - certificate Java security- you must first download it to your computer - if the certificate is not visible during import, you must specify All Files at the bottom in the Files of type field so that all files are displayed). Press the button and then .
4. Click and add these two sites to the list:
http://s2100w03.ufk21.roskazna.local
http://sufd.s2100w03.ufk21.roskazna.local
5. Go to the "Advanced" tab, scroll down the list to the "Mixed Code..." section and put a dot next to the words "Disable verification (not recommended)". Press .
Point 4 - for each region, there will be a separate SUFD address, in my case, an example for the Stavropol Territory.
1 address is start page sufd (where the login password is entered)
2 address - this is after authorization, when you enter the SUFD. I think you will understand. You can simply drive in 10.21.200.66:28081 - the IP address of the sufd server, I repeat this is the address for the Stavropol Territory! Actually everything.
When signing documents 1, pop-up windows may appear. It is necessary to answer them positively, allow the access offered in the operation window and put a tick.
" ←
←
←
Technical support by the UFC Perm region
:
239-96-54 - Koshkov Vladimir Evgenievich, Deputy head of the information systems department.
239-96-46 - Utev Sergey Petrovich, chief specialist-expert of the information systems department.
239-96-38 - Utkin Sergey Viktorovich, chief specialist-expert of the department of information systems.
In case of applying for technical support recommended invite a qualified employee with a level of computer proficiency"confident user" or system administrator.
UFK work schedule in the Perm Territory:
Remote financial document management system (SUFD)
To connect an organization to a remote financial document management system (hereinafter referred to as SUFD), the following items must be completed.
1. Software and hardware system requirements
For the normal launch and operation of the SUFD workstation, a number of requirements must be met, which are listed below.
Minimum hardware composition:
Processor x86 with a frequency of 2.0 GHz;
RAM 256 MB;
ROM 40 GB;
Monitor with a resolution of 1024x768;
Minimum throughput Internet channel should be 256 Kbps. For normal operation it is recommended to use an Internet channel with a bandwidth 3-4 times greater than the specified minimum.
Recommended Composition software tools:
Operating system Microsoft Windows 7/8/8.1;
Mozilla Firefox (recommended to use version , if necessary (mandatory 32-bit) version, if necessary to work in version Mozilla Firefox 52 and above will require the use of a plugin CryptoPro EDS Browser plug-in, description on the manufacturer's website);
Java 2 Runtime Environment (mandatory 32-bit, version 8.xx is recommended, you can also use .xx, does not work correctly);
CryptoPro EDS Browser plug-in;
CryptoPro 4.0;
Continent AP 3.7
2. Exchange agreement electronic documents
To commit electronic document management with the Federal Treasury, it is necessary to conclude an agreement on the exchange of electronic documents with the Department Federal Treasury in the Perm region:
2.1. .
2.2. .
3. Preparation of the workplace for the transition to SUFD
3.1 Issuance of CIPF distributions (CryptoPro, Continet AP) is carried out in the Federal Treasury for the Perm Territory or its territorial department (according to your location). Issuance is made according to official request, .
Note:
If you have already installed CryptoPro CIPF, Continent AP and received traffic encryption keys for Continent AP to work in EDMS, then all this can be applied to work in SUFD and you can go to clause 3.3;
To work in SUFD, two types of keys are used - traffic encryption keys and keys for electronic signature(hereinafter ES) in SUFD;
3.2. Generate traffic encryption keys for CIPF Continent AP, obtain and install certificates of traffic encryption keys (Instructions for generating keys and installing certificates for traffic encryption keys are in the archive with CIPF Continent AP).
3.3. Perform computer settings.
4. Creation account in SUFD and electronic signatures for work
4.1. for persons entitled to first and second signatures in accordance with the signature sample card.
4.2. If the user does not require the issuance of an electronic signature, then it is necessary to fill in "".
5. Training
Training is carried out independently, using following documents:
- description of work in SUFD in relation to the role of a participant in the budget process and other documentation.
.
.
6. Connecting to SUFD
The connection is made when the Continent AP connection is connected (the icon should turn blue or green color) by the address http://10.56.200.13:28081
To enter the SUFD portal, you must enter the login (username) and password created when filling out the Application for connection to SUFD. After connecting, you can change the initial password to another one and check the operation of the SUFD at this workplace:
1. log in;
2. create some kind of financial document, for example, a payment order or a request for a cash expense;
3. sign the created document by the accountant and the manager (the status of the document should change to "Approved");
4. if this document does not need to be executed, then it is required to refuse automatic sending this document;
5. remove (remove) all signatures from the document;
6. roll back its transfer status to the "Draft" status and delete it;
7. create Announcement and send it (according to this ).
Note:
If there are problems during operation, you can look at "".
Additional documents and files:
.
.
.
OTR-2000:
8-800-2222-777 - single free number of the all-Russian SUFD support service
Feedback and suggestions for improving the quality of service can be left in the "Feedback and Suggestions" section of the support portal (http://service.otr.ru/Pages/QM_list.aspx)
Applications can also be sent to the box Email - [email protected]
Other documents
The procedure for supporting PPO FC DOCX 4.5 MB
License for the right to use CIPF “Crypto-Pro CSP 3.6” PDF 472.1 KB
About the number of CryptoPRO licenses DOC 37.5 KB
Order 346 On approval of instructions for ensuring password protection of SUFD PDF 914.6 KB
Preparation for work in SUFD DOC 223.5 KB
For correct operation SUFD is necessary:
1. The presence of the Windows XP or Windows 7 operating system, since there is no support for newer versions of the Windows operating system, as well as other operating systems in SUFD. All settings described below apply only to Windows XP and Windows 7.
2. Install Java version 6.17, Java 7.67 Required settings each Java versions for correct work with SUFD are listed below. Do not install the 64-bit version of Java, even if you have an operating system Windows system x64. Be sure to disable java update if you have installed version 6.17 or 7.67!
Do not install Java on top of old Java, otherwise there may be problems with signing documents. First you need to uninstall the installed version and only then install the new one..
3. Install Mozilla Firefox. If you have Java 6 installed, then you need to install Mozilla Firefox under version 18, for example, version 16. In other cases, it is better to install Mozilla Firefox with one of latest versions, but always under version 52, since it and subsequent versions disable Java support. For example, fit version 51.0.1. Mozilla Firefox Necessary settings for correct Mozilla works Firefox with SUFD are listed below. Don't install 64 bit Mozilla version Firefox, even if you have operating system Windows x64, since 64-bit versions lack support for many plugins, including Java. Be sure to disable mozilla update Firefox! To work with the SUFD portal, it is recommended to use Mozilla browser Firefox. All other browsers (Opera, Google Chrome, Internet Explorer) may not work correctly with the SUFD portal.
4. Install CryptoPro 3.6.
5. Install Continent AP 3.5, the certificate for the AP Continent and make sure it connects to the server.
6. Install the root certificate from www. roskazna. ru from the section GIS-> Certification Authority-> Root certificates
7. Install personal certificates for SUFD users.
8. Add to file "C:\WINDOWS\System32\drivers\etc\ hosts"two lines:
10.54.200.66 s5400w03.ufk54.roskazna. local s5400w03
10.54.200.66 sufd. s5400w03.ufk54.roskazna. local suffix
If you have Windows Vista or Windows 7 , then before making changes to the file hosts you need to copy it to another place, for example, to the Desktop and edit it there. After saving the changes, the edited file hosts you need to copy it back to the folder "C:\WINDOWS\System32\drivers\etc\" and replace the old file with it.
9. Check that the site opens in Mozilla Firefox 10.54.200.66:28081
If you receive a message that the server was not found, then you must perform the following steps:
a. You need to find out if the Windows operating system uses the edited by you host file. To do this, you need to run the command line: Start - Run, in the opened window enter cmd command and press [OK].
b. Will open black window(That's what it is command line) in which you need to write "ping 10.54.200.66" (without quotes) and press .
c. If the message "Ping failed to find host 10.54.200.66. Check the host name and try again" appears, then Windows does not see the file you edited. Try copying the edited hosts file again to "C:\WINDOWS\System32\drivers\etc\" and replacing the old file with it.
Setting up the listed software:
Examination installed version Java:
1. Go to Control Panel - Java - This is the version of Java you have installed.
2. You need to go to Control Panel - Java - Java - and make sure both tabs in the tables have only one row each.
3. If there are two or more of them, then several versions of Java are installed. All versions must be uninstalled Control Panel - Add or Remove Programs(on Windows Vista/7, Java is uninstalled under "Programs and Features").
5. Install Java.
Note: Any version of Java listed below works.
Java7
1. Go to , uncheck the box and reply to the message that appears.
2. On the "Security" tab, lower the slider to the "Medium" level.
3. Go to the "Advanced" tab, scroll down the list to the "Mixed Code..." section and put a dot next to the words "Disable verification (not recommended)". Press .
Java6 Update 17
1. Go to Control Panel - Java - Update, uncheck the box and reply to the message.
Mozilla Firefox
You can also use Mozilla Firefox 3.6, but its setup will be slightly different from what is described here.
1. Go to Tools - Settings and on the "Content" tab, uncheck the box "Block pop-up windows". Press .
2. Go to and on the "Network" tab, click the [Setup] button opposite the "Connection" item. In the "Connection settings" window that appears, select "No proxy" and click .
3. Go to Tools - Settings - Advanced and on the "Updates" tab, select "Never check for updates". Press .
4. In address bar type "about:config" and press on the keyboard.
5. Click on the [I promise I'll be careful!] button.
6. Find parameter " extensions. blocklist. enabled" and change the value to " false by double-clicking on this line.
7. Go to Tools - Addons
8. In the "Extensions" and "Plugins" sections, find all the lines that mention Java and make sure that they are enabled (if there is a "Disable" button, then the plugin is enabled). If Java plugins disabled, they must be enabled. If instead of a button there is a drop-down list, then select the "Always enable" option.
9. Restart Mozilla Firefox
Note: Setting data Java programs and Mozilla Firefox are identical for various versions Windows (XP, Vista, 7, 8), but unlike Windows XP in the rest Windows versions, due to the operation of the security system, the settings made may not be saved. Therefore, it is advisable to re-enter the settings of these programs and check that the changes you have made are saved.
