Windows 10 is overloading your hard drive. Hard drive is fully loaded: causes and solutions

Computers have become firmly established in people's lives and have literally become good helpers for work, study, etc. The average user spends about two or even more hours on a PC, but knows little about fixing a number of problems.

Due to the fact that the OS is constantly loaded various information, cache accumulation and other unnecessary files, residual documents that affect the speed of any operations. Sometimes it may happen that in new Windows Disk 10 is 100 percent loaded, but a number of actions with this outcome are incomprehensible. Don’t worry too much, because all problems can be solved!

A large number of all kinds of games, programs, documents of various extensions, videos, films, music, etc. - all this is stored on special sections. The consequences of too much memory load can be: delayed response computer device, freezing, errors in operation. Moreover, the likelihood of such a problem does not depend on the release of your operating system, that is, you can encounter this difficulty even on the newest, most popular and highly praised Windows 10 operating system.

Why is there not enough memory on the drive?

In general, there are quite a lot of reasons for not having enough extra gigabytes on your hard drive. For example:

How to identify the problem?

In order to understand what exactly prevents the computer from working properly, you need to look at the active processes whose load is one hundred percent.

Solving the problem

There are many options for getting rid of an intractable situation. Here are some of them.

Often the source of this situation is patches with innovations for the OS, which are offered by the Update Center. There are two variations here: either disable downloading updates, or wait for the installation process to complete. To stop auto-downloading and installing patches:

Data backup function

Otherwise it is also called backup. It also affects the performance of the computer, as it creates and stores archives with information and settings.

Windows Search and SuperFetch

There are often cases when internal components systems begin to deteriorate personal computer. So, for example:

Windows Search feature

This software is used to search and index documents. Sometimes the work of the search engine is disrupted, and it begins to lag, produce errors, and freeze, which leads to the disk being completely loaded. In this case, it would be best to turn it off manually:

Provided that after some period of time the same problem occurs, you will need to turn off Windows Search. To do this:

Remember that if you disable the service, searches in Explorer will stop!

Superfetch

This software is necessary in order to maintain good condition and support the operation of the operating room. Windows systems. Its tasks include monitoring the list of frequently launched applications and transferring them to the system memory. Of course, this speeds up the launch procedure for some programs, but in order to achieve this effect, SuperFetch first spends large number memory. You can disable the service like this:

Process System

Don’t despair if you’ve already tried a bunch of options, but there’s still no result. The problem may be with the System. One of the conditions for the emergence of such difficulties may be a lack of existing rights. You can access it as follows:

Viral infection

One of the reasons may be virus attack, which is possible if a good antivirus program or it needs a serious update. It is possible that your computer has been infected.

Hardware

Also, in addition to all the above points, it is also possible that system unit simply stopped functioning normally due to its old age or incorrectly connected cables and components.

There may be unreliable contact between the loops and various devices. To analyze the hard drive for the presence of such violations, you need to open the line for issuing commands (the opening method is described above) and in this application type the command chkdsk.exe /f /r. After this procedure, a PC restart is required.

Few of them regular users The PC resorts to such a function, and, probably, some category does not even know what it is for. The essence of defragmentation is that it helps improve the quality of the operating system by partially rewriting information.

Conclusion

Here, in general, are the main causes of disk problems and options for dealing with them. Regardless of the conditions and degree of neglect of the laptop or personal computer, there is no need to panic.

Thanks to this publication, in which every little detail is described in detail, any user, even a beginner, can try to resolve such violations without resorting to outside control.

The Windows 10 operating system has one unpleasant feature, which manifests itself in 100% hard drive load. As a result, system performance drops, the computer slows down and freezes when performing even the simplest actions.

Ways to solve the problem

Often, the hard drive in Windows 10 is loaded by file fragmentation, backups, system updates, as well as processes such as svchost, system. To improve performance and fast loading, users disable from startup individual programs. However this action if the disk load is 99–100%, it is ineffective.

According to the analysis of methods for fixing the problem, the most in effective ways are:

• Shutdown local recording Microsoft and the transition to local recording.
• Disabling the paging file. To do this, click right click mouse and select “Properties”, then click “ Additional options systems." A new window will open. In the “Advanced” tab, click on the “Options” button in the “Performance” section.

• A new window will open. Go to the “Advanced” tab. Click “Change”.

• Check the “No paging file” checkbox.

It is also worth disabling some services. To do this, perform the following steps:

• Press “Win+R” and “ms”.

• Disable the services “Windows Search”, “Superfetch”.

• For the changes to take effect, you need to restart your computer.

Also, the load in Windows 10 can be caused by the “System” process. Instead of turning off this process, it is worth giving him more rights. To do this, perform the following steps:

• Open “Task Manager” and right-click on the process. Go to the “Security” tab.
• Select "All application packages". Click “Change”.

• We give the service more rights. If the change fails, you must. To do this, click on the “Advanced” button in the same window and select your user.

If the “Task Manager” does not display the processes that load the disk, you should go to the “Performance” tab and click on the “Open Resource Monitor” button.

A new window will open. Go to the “Disk” tab and see which processes or applications are loading the Windows 10 disk at 100 percent. The solution here could be as follows: right-click on the process and select “End”.

If you couldn’t solve the problem with disk load in Windows 10, you should check the hard drive itself for functionality. Perhaps there are bad sectors, which are the reason slow work PC and system load.

How to solve the disk loading problem if the svchost.exe file is not a virus, watch the video:

Part two:

Did you see the message "Disk Loading 100 (Windows 10)"? The solution to this problem is not that difficult. It's enough to know a few simple techniques that will help you deal with this situation. If you see a message like this, there is no reason to panic. It's not as dangerous as it seems. You simply won’t be able to comfortably install programs and games on your computer anymore. Also, new documents cannot be saved - the system will slow down very much. But in general, this is not the worst message for Windows performance. So what to do if you have 100 disk load (Windows 10)? The solution to the problem consists of several simple steps. Bringing them to life is easier than it seems.

Eternal problems

Windows 10 - new operating system from Microsoft Corporation. It is installed by many users forcibly. Oddly enough, this operating system is still “raw”. It has many problems and problems. Some are eliminated, while others remain there for now, annoying users.

Do you have a disk load of 100 (Windows 10)? Many users are looking for a solution to this problem. Yes, this is not the worst thing that can happen, but after this message the computer starts to slow down. Because of this, sometimes it is simply impossible to work. What is offered to users to resolve the problem?

Checking disk space

The first step is to make sure that the hard drive on your computer is actually loaded. To do this, you need to go to "My Computer". Look at the indicator in the window that appears free space. If it is red, then the message about fullness did not arise by chance.

Otherwise, you will just have to ignore the window that is bothering you. All these are bugs that Windows 10 is already famous for. Therefore, it will not work. Just accept it and hope that the message itself will stop bothering you. This is exactly what many users advise to do. After all, Microsoft could not solve this problem neither with Windows 8 nor with Windows 10.

Antivirus

But there is no need to despair. You can try to solve the problem you are experiencing yourself. Noticed the message "100% disk utilization"? If in fact there is nothing wrong with the space, seek help from antivirus systems.

Sometimes viruses cause these types of messages. They are not that difficult to detect. After checking with an antivirus, everything becomes clear. Those found are treated and then removed (those that cannot be “healed”). Afterwards the error should disappear. No? Then it's easy system failure, which will take some getting used to until Microsoft figures out how to fix the problem.

Clearing programs

How to remove disk load at 100 (Windows 10)? If we're talking about about a real lack of space, no difficulties will arise in solving the problem. After all, everyone has long known how space is freed up.

We are talking about removing programs and games installed on the computer. Perhaps the most best way freeing up space. Look at what you no longer use, and then use the Control Panel to remove the selected applications. Considering how much programs and games now weigh, you can definitely free up a few GB of memory. And then you won't have any more pop ups annoying message that there is not enough space on your hard drive.

Cleaning the registry

But the next technique is not known to everyone. What to do if the disk is loaded at 100 (Windows 10)? To do this, you will need to clean your computer's registry. This is best done automatically, using special utilities. They don't weigh too much.

Here on the "Processes" tab look at everything that is running on at the moment in the operating system. You need to clear the list that appears. Pay attention to processes that take up too much space. Most likely, they are the main source of our current problem.

Select all unnecessary, suspicious and redundant processes, and then click on the “End Process” button. This action will have to be repeated for each task that is deleted. Once you're done, your disk space will be freed up and your computer will stop slowing down. Its performance will increase.

Reinstallation

Do you still have disk loading in Windows 10 100? None of the above helped? If the message does not interfere with your work, you do not need to do anything. But when the operating system slows down and the warning seriously affects the operations being performed, you will have to take extreme measures.

It's about complete reinstallation computer. More precisely, the operating system. Users recommend not installing Windows 10 again. Replace it with a more stable and proven operating system. Don't forget to completely format the drive before bringing your idea to life.

In principle, you can also rely on the “Ten”. Only the possibility of troubleshooting the problem with constantly disturbing messages about fullness hard drive in this case it is small. Windows 10, as already mentioned, is not particularly stable yet.

Drivers

The last thing that can be suggested to users to solve the problem is to reinstall the drivers on the computer. More precisely, update them. Sometimes this can get rid of the "Disk loading 100 (Windows 10)" message. This solution is relevant when, in fact, everything is fine with the space on the computer.

Special hope for success this technique not worth it. It only helps in exceptional cases. Users note that if you receive a message about the disk being full for no apparent reason, the likelihood of success is too low. This failure so far it has not been eliminated.

As you can see, there are many options for solving the problem. But none of them gives a 100% guarantee. Full success is expected only when the hard drive is truly full. Just free up space using the methods described above, and then enjoy the results. Try not to clutter your computer with programs and clean it from time to time system registry. So it will be possible to have it all the time free space on your hard drive.

A problem very often arises when, due to the fact that in Windows 8 the hard drive is loaded at 100 percent, the system begins to slow down. In some cases, this can lead to freezing and data loss. This phenomenon can also be observed in earlier Windows versions, however, in the G8 this problem occurs much more often.

Before moving on to solving the issue, you should understand why this happens, what programs can cause severe loading HDD(hard drive), and also in what cases is this normal. This knowledge will help you in solving the problem associated with heavy hard drive loading. Let us immediately note that it is guaranteed to help you -.

The hard drive can boot different programs, in particular, bootloaders. Such utilities include:

• Service Windows updates 8.
• Various downloaders, for example, torrent client, DC++, browsers and so on.
• Games and installation assistant programs.

In addition, to download hard drives may be affected by various malicious programs (so-called viruses). Another reason high load may be hiding in the strong HDD fragmentation. This means that you have been using the operating system for a long time, regularly install and uninstall programs, and various files. In this case, it is recommended.

In addition to all of the above, heavy loading and system slowdown can occur as a result of hard drive wear. It should be understood that each computer part has a specific resource. Moreover, the service life may vary depending on how you use it.

As a rule, if an operating system is installed on the hard drive, and you constantly install and uninstall various programs, games, and so on, then the deadline HDD services can be significantly reduced and amount to about 5-7 years. If you use it as an additional memory drive for storing files, then the operating life will be much longer.

Checking the performance of the hard drive is quite simple. There are various utilities for this, for example, Victoria or HDD Regenerator. However, it is worth remembering that it is not recommended to perform such checks unless necessary, as they also shorten the life of the device. It is recommended to use them only in cases where you have any problems with the drive.

How to install an SSD hard drive in a computer: Video

Solving the problem with heavy hard drive loading

It goes without saying that, depending on the source of the problem, the solution will be different. In order to see which process in Windows 8 is loading the hard drive at 100 percent, you should open the “Resource Monitor”. This is done as follows. Sign in to your desktop. Right-click on the taskbar and select “Task Manager” from the menu that appears.

In the window that opens, click the “Details” button, it is located at the bottom of the menu. Here, open the “Disk” tab and see what processes are loading the hard drive. In this program you can not only watch processes, but also terminate them.

If it is system update services or some kind of boot loader, then to solve the problem just wait for the data to load. If you don’t want to wait, just close the corresponding program. Downloaders such as UTorrent or DC++, in addition to downloading, can also distribute information, so they scan the hard drive and share files. At these moments it is observed high load to disk.

If this does not help, then check the system with some antivirus. It is quite possible that the computer was penetrated malware. Another reason heavy load hard drive is that the operating Windows system 8 has a temporary SWAP file. It does not have a specific volume and is necessary in cases where the system does not have enough RAM. In such cases, this file takes up a certain space on the HDD, using it as a virtual one RAM. The solution to this problem is to expand the RAM.

If you have checked your hard drive with Victoria or HDD Regenerator and you have bad sectors, this means it’s time to purchase new HDD, since the old one is already on the verge of breaking. Of course, it can still be used for quite a long time, but only as additional storage, because if you use it as the main one, then at any time you can lose important data.

One of the problems that occurs in Windows 10, it seems, more often than in previous versions of the OS is the disk loading at 100% in the task manager and, as a result, noticeable system slowdowns. Most often, these are simply system or driver errors, and not the operation of anything malicious, but other options are also possible.

This instruction will detail why the hard drive (HDD or SSD) in Windows 10 may be 100 percent loaded and what to do in this case to fix the problem.

Note: potentially some of the proposed methods (in particular, the method with the registry editor) can lead to problems with starting the system if you are inattentive or simply due to a coincidence, take this into account and take it if you are ready for such a result.

Programs that actively use the disk

Despite the fact that this item is relatively rarely the reason for the load on the HDD in Windows 10, I recommend starting with it, especially if you are not experienced user. Check to see if some installed and running (perhaps in startup) program is causing this.

To do this you can follow these steps

Please note, not any of your own installed programs causes disk load (i.e. it is first in the list). This could be some kind of antivirus that performs automatic scanning, torrent client, or simply malfunctioning software. If this is the case, then it might be worth reinstalling it, that is, looking for a problem with disk load not in the system, but in third-party software.

Also, any Windows 10 service running through svchost.exe can load the disk 100%. If you see that this particular process is causing the load, I recommend looking at the article about - it provides information on how to using Process Explorer to find out exactly what services are running through the specific svchost instance causing the load.

AHCI drivers are not working properly

Few users installing Windows 10 do anything with drivers SATA drives AHCI - for most in the device manager in the “IDE ATA/ATAPI Controllers” section it will be listed as “Standard” SATA controller AHCI". And usually this does not cause problems.

However, if without visible reasons you observe a constant load on the disk, you should update this driver to the one provided by the manufacturer of your motherboard(if you have a PC) or laptop and is available on the manufacturer’s official website (even if it is only available there for previous versions Windows).

How to update:

Once the installation is complete, restart your computer and check if the problem with the load on the HDD or SSD is still there.

If you can't find the official AHCI driver or it won't install

This method can fix 100% disk load in Windows 10 only when you are using a standard SATA AHCI driver and the driver file information in Device Manager shows the file storahci.sys (see screenshot below).

The method works in cases where the displayed disk load is caused by the fact that the hardware does not support MSI (Message Signaled Interrupt) technology, which is enabled by default in standard driver. This is a fairly common case.

If so, then follow these steps:

When finished, close Registry Editor and restart your computer, then check to see if the problem has been fixed.

Additional ways to fix HDD or SSD load in Windows 10

There are additional simple ways, which can correct the disk load in case of some operating errors standard features Windows 10. If none of the methods above helped, try these too.

• Go to Settings - System - Notifications and actions and turn off the option "Get tips, tricks, and recommendations when using Windows."
• Run command line as administrator and enter the command wpr -cancel
• Disable Windows services Search and How to do this, see.
• In Explorer, in the drive properties, on the General tab, uncheck “Allow the contents of files on this drive to be indexed in addition to file properties.”

At this point in time, these are all the solutions that I can offer for the situation when the disk is 100 percent loaded. If none of the above helps, and, at the same time, this has not been observed before in the same system, it may be worth a try.