Android 2.3 3 exit safe mode. How to remove safe mode on Android quickly! What is safe mode on an Android phone

You can learn how to remove safe mode on Android in three clicks from this article. You can find a solution to the problem of constant rebooting with activated safe mode. We have covered 7 ways to reset safe mode, problems that may arise and what to do if nothing helps. Detailed instructions that will solve the problem in 9 out of 10 cases.

Sometimes situations arise when a phone or tablet on Android needs to be loaded not in normal mode, but in safe mode. For example, when it starts to freeze and glitch. In such a situation, safe mode is used as a diagnostic tool. In most cases, putting the gadget into safe mode allows you to find and solve the problem, but sometimes it doesn’t. About 5-10% of users experience a situation where they cannot return to normal mode and the phone constantly restarts with safe mode active.

Safe Mode on Android - why is it needed and how to enable it

Safe mode is needed when, as a result of tampering with the firmware or operating system, a system failure occurs and the phone does not work correctly, crashes, graphic artifacts or severe slowdowns appear. If you switch the device to this mode, only system applications will launch and the functionality of the gadget will resume.

If you are looking for an answer to the question of how to disable safe mode on Android, then you have encountered one of the problems described above. You entered “safe mode”, after which you tried to enter normal operating mode and were unable to do so. To carry out this operation, use one of the methods listed below.

Removing safe mode using Android

To understand whether Safe Mode is enabled or not, look at the lower left corner of the screen. It should display a darkened rectangle with the appropriate inscription. If it is not there, do the following:

1. Through the menu, open a window that displays a button to turn off, restart, or put the phone in airplane mode. Or hold down the device's power key for a few seconds until the desired window appears;
2. Press the “power off” button and hold until the message “switch to safe mode?” appears. All third party applications will be disabled...”

If this message appears, it means the phone is in normal operating mode and you do not need to turn off safe mode. If it doesn’t appear, it means your phone is loaded in safe mode. To disable “safe mode”, simply reboot your device.

Turn off Android safe mode using a combination of buttons

Sometimes rebooting does not help and the gadget constantly boots in safe mode. Most often this happens due to a failure of factory applications that are configured to autostart. On some phones, “safe mode” can be disabled as follows:

1. Turn off the device;
2. Press and hold the volume button (down) and the power button. Hold both keys until the phone enters Recovery. Now remove the battery and try to turn on the device;
3. If everything went well, the gadget should boot in normal mode.

Advice: Do not use this method if your volume button does not work or is stuck. Otherwise, the phone will always boot into safe mode. After that, only flashing will help.

Open the system “settings” application. Go to the “Backup and Reset” or “Backup and Reset” section. Click the “factory reset” button. Wait until the device is restored to its default state and reboots.

If you are unable to reboot in “safe mode”, use the following instructions:

1. Turn off the device;
2. Simultaneously press the volume down button (on gadgets from Prestigio, HTC, Motorola, Huawei, LG) and the on/off button. If you need to turn off safe mode on Android on Samsung, hold down the “Home” button and the volume up button;
3. Wait for Recovery to download;
4. In the menu that appears, select “reboot” or “reset device” or “erase data” (it varies on different firmware);
5. Use the sound adjustment keys to select this item and confirm by pressing the power button.

After this, your gadget should reboot and the settings should be reset to factory settings. Do not try to turn off or remove the battery until the bare version of Android has loaded, otherwise the device will have to be reflashed or taken to a service center.

Other ways to turn off safe mode in Android

If the above answers to the question of how to remove safe mode on Android did not solve your problem, try using other methods that sometimes help:

• Remove the battery and reinsert it after a few minutes. It is possible that safe mode is not disabled due to the fact that information about it is stored in short-term memory, which is responsible for temporarily storing the current time, date, time zone after removing the battery;
• Remove recently installed applications. The problem with disabling Safe Mode may be due to a glitch in one of the apps you recently downloaded. This is rare, but it does happen sometimes;
• Remove applications that load into RAM immediately after downloading. In most cases, they are the reason why it is impossible to exit safe mode. Uninstall such programs and try rebooting your device. You can determine which application caused the problem “at random” - erase the software one by one until you achieve the desired effect.

Not a single method of returning to normal mode helped? Take the gadget to a service center or change the firmware yourself. Most likely, your phone's firmware has crashed. It sometimes happens after an update, after installing an unofficial firmware version, after obtaining root rights and incorrect modification of system files, etc. In this case, it will not be possible to roll back the changes without a computer and replacing the firmware.

The Android platform is democratic and allows the user to make changes to system files, which is fraught with consequences, such as unstable operation of the device or termination of access to applications. To identify and troubleshoot problems, developers have created the ability to turn on the phone in safe mode, when only pre-installed applications are opened. Read our article about how to boot your phone or tablet into safe mode.

How to enter safe mode on Android before 4.1

On a smartphone with a version lower than 4.1, you can enable safe mode in two ways.

First way

Turn off the power to the device by holding down the power button, then turn it on again.

1. When the manufacturer's logo is displayed on the display, simultaneously hold down the volume up and down keys. Hold them until they are fully loaded.
2. You will know that safe mode is enabled by the inscription at the bottom of the screen.

Video: how to start your phone in safe mode on Android up to 4.1

Second option

Turn off and on your smartphone, and when you see the manufacturer’s logo, press and hold the “Menu” button until the main screen appears.

How to enable safe mode on Android 4.1 and higher

In versions of Android 4.1 and higher, rebooting into safe mode occurs at the moment of shutdown. Sequence of actions:

1. Press and hold the power button for a couple of seconds.
2. When the menu appears with the options “Shut down” and “Restart”, press and hold “Shut down”.
3. A message will open asking you to confirm rebooting in Safe Mode. Click OK.
4. The phone will reboot into safe mode, and you will see the corresponding message at the bottom of the display.

If the above method does not work, try repeating the steps, but after the menu appears, hold down the “Reboot” item for two to three seconds. On devices flashed with MIUI, to enable safe mode, you need to turn off the device, and when turning it on, press and hold both volume keys and the power button at the same time. Once the logo is displayed, you can release the Power key.

Video: how to enter safe mode on Android above 4.1

Smartphones with a special transition to Safe Mode (table)

If standard methods for activating protected mode do not work, your smartphone or tablet may need to be rebooted in a special way. Study the table below and try non-standard solutions.

The standard way to return to normal mode from safe mode is to restart the device using the power button. If the method does not work, to exit Safe Mode, remove the back cover of the gadget and remove the battery. Insert it back: after a minute the system will work as usual.

Are you experiencing problems with your communication device due to loading some applications, or has your Android started to glitch for no apparent reason? We recommend that you put your Android in safe mode. In addition to the and modes, Google has included another mode in Android devices - safe.

When you enable safe mode on Android, the device’s operating system automatically disables all installed applications, which gives you the opportunity to make sure that it is the applications that are slowing down the smartphone, or whether frequent reboots and freezes are due to the fault of the manufacturer. In the second case, the service center will help you solve the problem.

How to enable safe mode on Android - detailed instructions, option one

This guide is valid for most smartphones and tablets. If you own a Nexus smartphone or tablet, you can put your device into safe mode using the following method:

1. Press and hold the "Power Off" button on the screen.
2. Confirm the request to put the device into safe mode.

Transferring Android to safe mode - detailed instructions, option two

1. Bring up the shutdown menu.
2. Press and hold the “Restart” button on the device screen.
3. Confirm the request that appears on the screen.

Safe Mode on Android

Method No. 1

1. Call up the device shutdown menu.
2. Press and hold the “Power Off” button on the screen for a few seconds.
3. Confirm the transfer request.

1. Turn off the device.
2. Turn on the device.
3. Press and hold the "Volume Down" button until it boots.

1. Turn off the device.
2. Turn on the device.
3. Press or hold the “additional options and switch applications” button immediately after the logo appears on the screen.

Many users of Android smartphones who have been using their gadgets for a long time, at some point are faced with a rather specific function of the operating system - safe mode. In this case, even a powerful smartphone includes a special procedure for launching exclusively system programs and blocks applications from external sources.

This function is similar in effect to special fuses in electronic devices that turn off the gadget if the system is in danger.

From our article you will learn the features of this function, how to enable and disable safe mode on Android if it is running by the system.

What is safe mode on an Android phone

If the user of an Android smartphone constantly launches various applications, a cache gradually accumulates in the device - residual program files that complicate the system's operation. In addition, applications from unreliable sources may be infected with a virus or simply contain critical errors in their code, causing Android to crash.

In these cases, the self-defense function is launched - safe mode on Android. Only system and background processes are running on the phone.

By the way, one of the possible reasons for enabling security mode on Android may be that the phone is filled with a huge number of unnecessary files. You will learn what to do in this case from our article Cleaning up junk on an Android phone

How to enable safe mode on Android

In the Android settings, the user can independently enable safe mode. To do this you need:

• Press the Power button on your phone
• Wait for the dialog box to appear on the screen
• Press the item “Power off”
• Click OK

After rebooting, the system will inform you that the phone is in safe mode. In this case, the shortcuts of all third-party applications will be grayed out, and the programs themselves will be blocked.

After switching to safe mode, the user can easily remove unnecessary applications and clear the phone's memory.

In some cases, even after clearing the phone's memory, the user cannot access Google Play to download applications. You can read about how to deal with this problem in our article Google Play is not working.

You can also put your phone into safe mode using special applications. However, it is worth considering that such programs require rooting the smartphone. Remember that gaining superuser rights may disrupt the system, and in addition, a rooted phone will automatically fall out of warranty service.

How to turn off safe mode on Android

There are three main ways in which you can put your Android device into normal mode.

Method 1: Reboot

To do this, you just need to hold down the gadget’s power button and select the reboot or Reset command in the control window.

Method 2: Removing the battery

Please note that this method of disabling safe mode only applies to a smartphone with a removable battery:

• Disconnect your device
• Pull out the battery
• Wait 1-2 minutes
• Insert battery
• Turn on your phone

Method 3: Through the Recovery menu

Disabling the security mode using the engineering menu is perhaps the most radical method, which should only be used as a last resort. The fact is that after manipulating Recovery on the smartphone, all user data, files and downloaded applications are erased. In addition, Android will roll back to factory settings:

• Restart your device
• Wait for the Android logo to appear
• Press and hold the power and volume up/down buttons at the same time
• In the Recovery menu, click on Wipe data/Factory Reset
• Wait until the system finishes processing itself
• Click Reboot.

It is worth noting that cleaning the system through the Recovery menu only affects the internal memory of the smartphone. Therefore, before this procedure, you should transfer your contacts to a computer or laptop, and transfer applications to an SD card.

This procedure, as a rule, occurs stably and without failures. However, if you encounter an error when performing a Factory Reset, check out our article about.

So that you don’t have to rack your brains about how to remove safe mode on Android, you need to follow certain rules:

• Install applications only through the Google Play store
• Install a reliable antivirus program that will protect your gadget from malware.
• Choose a powerful smartphone that can withstand maximum loads.

The last point is the easiest to accomplish - just study the Fly catalog and choose for yourself the most productive and affordable Android phone.

How do you monitor the condition of your smartphone? Tell us about it in the comments to this article or in the official group

The Android operating system can easily be littered, thereby causing constant freezes and other unpleasant glitches. Safe mode can help you find out the reason for their appearance. Its main feature is the inability to use those applications that you installed after purchasing the device. You can only run pre-installed and system programs in safe mode. In this article we will talk in detail about how to launch this mode, as well as how to exit safe mode.

Google does not insist that all manufacturers implement a specific way to launch Safe Mode into their smartphones and tablets. Therefore, it may differ from model to model. The most popular method is as follows:

Step 1. Go to the shutdown menu by holding down the power button for a while.

Step 2. Hold your finger on " Turn off power" A new menu will appear.

Step 3. Agree with the system by clicking the " OK" The device will reboot, after which you will be in safe mode. The fact that you managed to enter it is indicated by the corresponding inscription in the lower left corner of the screen.

Programs and games that you installed yourself do not work in this mode. If your device runs without any lag in Safe Mode, then the problems are caused by one of the installed applications, and not by a poor state of the operating system.

Ways to start safe mode on different smartphones

The main method works on devices from the Nexus series and some other smartphones that are not supplemented with one or another proprietary shell. It is also used on unofficial firmware - for example, in CyanogenMod. On other gadgets, in most cases, a special list of actions is used.

HTC with hardware keys. Turn off your smartphone. Next, hold down the “Menu” key and press the power button for a couple of seconds to turn on the device.

Samsung Galaxy S3 and older models (OS version - Android 2.3 and lower). Turn off your device. Next, turn it on and wait until the manufacturer’s logo appears on the screen. Press and hold the “Menu” button until the operating system loads.

Modern Samsung smartphones (Android 4.0 and higher). Turn off your device. Turn on your smartphone and wait until the white logo of the South Korean company appears. At this moment, hold down the volume down button. Keep it until the operating system boots successfully.

Motorola Droid RAZR and some other devices. Turn off your device. Next, turn it on by pressing and holding the volume up and down buttons at a certain moment. Keep them in safe mode until the system boots.

In many cases, one of the above methods also works on devices from other manufacturers that we have not mentioned. Try it, experiment!

Exiting Safe Mode

Some users are also interested in how to disable safe mode on Android. This is actually much easier to do than getting into safe mode. Turning the device off and on often helps. You can also open the notification panel - there will probably be a message in it asking you to remove Safe Mode.

Click on the message and a pop-up menu should appear. There you need to click “ OK”, agreeing to end work in safe mode.

So the device will reboot, after which you will be in a completely normal mode of operation of the operating system.

On some devices from Samsung It is not possible to remove safe mode this way. When the manufacturer's logo appears on them, you need to press volume up button or the " Menu».