home-Payment systems-Automatic settings mms mts for android. All about mms from mts

Automatic settings mms mts for android. All about mms from mts

Setting up MMS on Android may be required in two cases. The first one is buying a new smartphone. The second is resetting existing settings to factory defaults. In any case, you need to change the configuration so that this service will work. This can be done in four ways:

  • Automatically.
  • With the help of a service center operator.
  • By manually entering the required values.
  • Using the operator's regional website.

All these methods will be considered in detail within the framework of this material.

Automatic setting

Automatic MMS setup on Android occurs with minimal human participation - this is its main plus. But the disadvantage is that it can be done only once - during the initial registration of the device in the mobile operator's network. After that, it is considered that everything is set up and there is no need to resend this data. Its order is as follows:

  • We install the SIM card in the appropriate slot of the smartphone and assemble it.
  • We turn on the device and, if necessary, enter the PIN code.
  • As soon as the registration is completed, the search for the required values ​​in the operator's database begins. After they are found, this information is sent to the gadget.
  • Next, the subscriber must accept the configuration profile and save it.

This completes the automatic tuning process. But the process of receiving and sending messages can be blocked. The activation procedure will be described later in the text.

Operator assistance

Unlike automatic, setting up MMS on Android with the help of a service center operator or by manual entry can be done many times - this is their plus. But on the other hand, in the process of their implementation, you need to perform certain manipulations, which slightly complicates the configuration process. Each of the operators has a free consultation number. For Beeline, this is 0611, for MTS - 0890, for Megafon - 0550. Next, following the instructions of the autoinformer, you need to establish a connection with the operator and order the necessary settings, which will then be sent to your smartphone. Then they need to be accepted and saved. After this operation, it is recommended to do a full reboot of the device, that is, turn it off and on. In some cases, you may need to activate the service. To do this, when calling the operator, please enable this service for this number. This completes the MMS setup on Android with the help of a service center operator.

Manual input

It is not always possible to call the service center, and MMS must be urgently received. In this case, the necessary settings can be set manually. To do this, go to the following address: "Applications"\"Settings"\"Networks"\"More"\"Mobile networks"\"APN". Then you need to enter the operator's parameters - this is the actual manual setting of MMS on Android. Beeline, for example, requires the following parameters:

  • Profile name must be Beeline MMS.
  • The home page in this case is http://mms/.
  • Data transmission channel - GPRS.
  • Access point - mms.beeline.ru.
  • The IP address is 192.168.094.023.
  • and the password are the same - beeline.

The rest of the values ​​remain unchanged. For MTS, you need to enter the following data:

  • Profile name - MTS Center MMS.
  • APN should be mms.mts.ru.
  • Login and password in this case are identical - mts.
  • Home page - http://mmsc.
  • The IP address is 192.168.192.192.
  • Port - 8080 (9201 may be used on some models).

As in the previous case, all other values ​​are left unchanged. Setting up MMS Megafon on Android requires the following values:

  • The profile name is megafon.
  • APN depends on the tariff plan. Here you need to look at the documentation that came with the starter pack.
  • Login and password in this case are identical - gdata.
  • The home page is http://mmsc:8002.
  • IP address - 10.10.10.10.
  • Port - 8080 (9201 may be used on some models).

We do not touch everything else and leave it as it is.

Another way...

Another way to get settings is to order them on the operator's regional website. To do this, on a computer connected to the Internet, through the search engine we find the page we need. Then select the smartphone model and enter the captcha and mobile number. Then we click "Submit". Within 5 minutes the necessary information will be received. We save and install the necessary profiles. If the requested information was not received within 5 minutes, it is better to repeat the order on the same regional website of the mobile operator. It is also recommended to do a full reboot of the phone. After that, we send and receive MMS. There shouldn't be any problems. If something does not work, we look for an error. As practice shows, somewhere they did something wrong. You can delete the old profile and do everything again.

Results

This article has described step by step what is on Android for various operators. As can be seen from everything previously said, there is nothing complicated about this. The happy owner of a new smartphone can easily cope with such a task. It is enough just to follow all the instructions, and you should not have any problems with this procedure.

In order to send someone a sound file, photo or video, it is not necessary to use e-mail - just use the MMS sending service. This service is used by a limited number of subscribers, but sometimes it is the only way to deliver multimedia information. For example, sending MMS is useful if the recipient does not have any tools to communicate with the outside world, except for a simple phone with MMS support. How to send MMS with MTS, how to set up your phone to receive multimedia messages, how to send a message for free - our review will tell you everything.

How to connect MMS on MTS

In order to connect MMS to MTS, you do not need to take any action - in most cases this service is enabled by default. If for some reason this is not the case, you should look into your Personal Account and activate the Mobile Internet service there (MMS works through data transfer services). If there is no access to the Internet, the service can be connected using the USSD command *111*18# or by sending an SMS with the text 2122 to the short service number 111.

There are no subscription fees and fees for connecting the Mobile Internet service. After that, you can set up your mobile phone and start messaging. The cost of sending MMS to MTS depends on the subscriber's tariff plan. To reduce the cost of MMS-exchange, a MMS package of 10 messages for 35 rubles for 30 days is provided.

How to set up MMS on MTS

In order to receive and send MMS messages, the subscriber will need a configured phone. Often settings are set automatically, immediately after inserting the SIM card into the phone. If this is not the case, you need order automatic settings by sending an empty SMS to service number 1234(or call toll-free number 0876). After saving the settings and rebooting the phone, you need to send a test MMS to 8890 (free of charge) - the network will understand that the phone is configured and can normally receive multimedia messages.

Otherwise, all received messages will go to the MTS MMS portal, and the recipient will receive SMS notifications with links to view MMS on the portal. If automatic settings for some reason do not come or are not installed, you should register them manually. How to do this depends on the specific phone model. The subscriber should go to the Internet access settings section and create profile with the following parameters(sometimes the MMS profile setting may be in the MMS settings section):

  • Profile name - MMS MTS (or something else);
  • Home page - http://mmsc;
  • Data channel - GPRS;
  • Access point - mms.mts.ru (without http://);
  • IP address (proxy address) - 192.168.192.192;
  • Proxy port - 9201 for old phones, 8080 for new phones;
  • Username and password - mts.

The names of the settings may differ depending on the phone model. Parameters not listed in the overview should be left as is. After entering the parameters, select the specified profile in the MMS settings, reboot and send a test MMS to service number 8890.

How to send MMS to MTS from your phone

In order to send MMS from your mobile phone, you need to go to the section with messages and select the item to send messages there(“Send MMS” or simply “Send Message”, “New Message”, etc., depending on the device model). We add the necessary files to the message. The maximum MMS size is 300 kb, and phones can scale excessively large messages to the required size on their own.

Next, select the recipient or drive in his number manually, after which we press the send button - after a few seconds (depending on the connection speed), the MMS will go to the recipient. The recipient's number must start with +7 is a prerequisite for sending MMS messages.

How to send MMS to MTS for free

Send MMS to MTS for free will help MTS official website There is a form for this here. We fill in the number of the recipient and sender, enter the title and text of the message (up to 1000 characters), add files or select a picture from the proposed gallery, and then click on the send button. The sender's phone number is specified to protect recipients from MMS spam - a confirmation SMS will be sent to the specified number. In addition, in the MMS sending form, you will need to go through an additional anti-spam. Service restrictions:

  • Message size - no more than 300 Kb;
  • Text size - no more than 1000 characters;
  • Sending MMS from one IP - 1 MMS from 1 IP in two minutes;
  • Sending MMS to the same number - 1 time in 2 minutes.

If the MMS recipient has activated the service "Prohibition of receiving informational SMS and SMS / MMS from the MTS website", then the message will not reach such a recipient.

How to watch MMS on MTS

In order to view the contents of an MMS, it must be extracted by clicking on the corresponding menu item. If your phone is set to receive MMS automatically, then you just need to open the delivered message. If the recipient's phone cannot receive MMS, then the messages will be available from the pages of the MMS portal, which was already mentioned in our review - follow the link specified in the SMS notification, enter the password and view the contents of the received message.

If you are tired of your operator

Guys, we know perfectly well that operators raise prices and force subscribers to connect services that the latter do not want to use. Fortunately, now there is a great opportunity to go to another operator with your number. There are virtual operators that provide very good rates and cool benefits when porting a number. One of them is Tinkoff Mobile, which is increasingly chosen by visitors to our site.

Today, to send media files, users generally prefer to choose email or social networks, for example, Odnoklassniki, Vkontakte and others. But, in principle, there are still people of the old school who still want to work with MMS rather than with e-mail. Why, you ask? There are hundreds of answers: e-mail can be hacked, a mailbox is difficult for individuals to register, it is very difficult to remember your address than someone else, you constantly forget your password, and much more. In this case, we decided to describe in detail how to set up MMS on your Android and what is needed for this!

In principle, the setup process is no different from the devices of the previous generation, when we registered all the settings in manual mode or in automatic mode. We will describe all the methods for the main cellular operators.

The article will contain the following operators:

  • Beeline;
  • Megaphone;
  • Tele 2.

Initially, you need to check whether the service is activated at all for your number or not, because in some regions, oddly enough, it is disabled for certain numbers. Call your carrier's customer service center. All calls are free!

Generally, the easiest way is to call the same service center and ask the operator to send you the settings. In this case, all operations will be carried out automatically, and for MMS to work correctly, you will only need to reboot the device and use this technology to the full.

Typically, the operator is told the phone model, after which the settings are sent and saved automatically. But it often happens that the user needs to do everything on their own in manual mode.

For Megaphone

If you have a SIM card from Megafon, then you will need to use the instructions that are described in this subheading!

Automatic setting. Send a free message without text to 5049. In a few minutes, a message will be automatically sent to your number with the necessary parameters specifically for your model. You need to save them and restart your phone. After that, you can try to send MMS to your friends.

Manual setting. In the Android operating system, go to the "Settings" item, select the "Wireless networks" tab and then "Mobile network". Here you will need to click on the "Access Points" tab. Now take a close look at what data needs to be filled in!

Please note that all submitted data must be filled out exactly as described above. Each entry is written in a separate tab. You will see all these fields when you go to the menu item "Access Points". Next, you just have to click the "Save" button, restart your phone and check if the MMS is working.

For Beeline

If you use a SIM card from Beeline, then you need to set up MMS, based on the instructions in this subheading!

Automatic. Call the toll-free number 06741015, after which all MMS parameters will be automatically sent to you. They can be saved directly in the dialog menu after opening an incoming SMS. Beeline also has the option to configure this technology using your personal account.

Manual. Go to "Settings", select the "Wireless networks" tab and follow the "Mobile network", click the item "Access points". Here you will need to specify the settings specifically for Beeline! They will be as follows:

For MTS

If you are using an MTS SIM card, then you need to perform the settings according to the instructions in this subheading.

Automatic. It is necessary to send an SMS message with an empty content to the service number 1234, after which, within a few minutes, the subscriber will receive a response SMS from the operator with the settings for his device. You need to save them and restart your phone, after which you can send MMS. It is also available to set up MMS using the "Internet Assistant", where each user independently manages the options on his phone.

Manual. For manual configuration, you need to go to "Settings", then to "Wireless Networks". Select "Mobile network" - "Access points" and write down the settings described below:

Save all the prescribed parameters and reboot your phone.

For Tele 2

Despite the fact that Tele 2 has existed not so long ago, you can also configure MMS for it, both on a regular device with support for Java applications, and on modern devices with Android and iOS.

Manual setting. Go to the "Settings" menu item, then select "Wireless networks" and click "Mobile network". Go to the "Access Points" tab and set the following parameters:

findings

In general, we can conclude that setting up MMC on Android is not difficult, no matter which operator you use. Just keep in mind that sending one MMS is about 7 rubles, and this is not very profitable, given the possibilities of modern technologies that allow you to send high-quality media files for free.

In the Android operating system, do not forget to activate the mobile network, because. it can be disabled by default! Attention! If you do not activate the mobile network, you will not be able to send MMS. To do this, go to the main menu "Settings" and select "Wireless networks". Click the "Mobile network" tab and activate it.

Also in Android OS, on the quick tabs panel, you can enable data transfer with one click.

Connecting the MMC function

The mobile operator MTS solves the issue: how to activate the MMS service on MTS, providing the service by default immediately after activating the package of one of the tariff plans. If the service is not automatically connected, using a computer with an Internet connection, go to your Personal Account. Here you can connect MMS to MTS for free as permanent service. This feature is available only to those who use the "Mobile Internet".

Using a computer, you can also send free MMS to phones that already receive such messages. If the mobile phone does not support receiving MMS, the subscriber receives a text message containing an Internet link to multimedia content, following which you can download a photo or video to a tablet or computer.

You can access the service in the following ways:

  • by making a free call to 0876*;
  • to 1234* send a message;
  • connect MMS to MTS via SMS after receiving a message with settings;
  • enter the settings manually.

iPhone multimedia message settings

We will separately consider how to connect MMS to MTS on an iPhone. Open the tabs in the iPhone settings “basic” - “network” - “cellular data network” - “cellular data”, fill in the fields of the APN, MMSC and MMS proxy forms. Accordingly, mms.mts.ru; http://mmsc; 192.168.192.192:8080. This is where you set your username and password.

Features of billing and use of the function

Before connecting MMS to MTS, carefully study the tariffication of multimedia messages of the package used, usually one message containing a photo, graphics or audio file will cost the user 9.9 rubles, the subscriber does not pay for incoming messages.

Tariffication of MMS in roaming takes place in accordance with the rates provided for such cases: from 14 to 30 rubles for 40 sq. of information. The operator undertakes to deliver the multimedia message within 72 hours, the numbers of other operators, but usually this happens much faster. The message size should not exceed 500 Kb for exchange within the network, 300 Kb for other operators. Connect MMS to your MTS phone and enjoy the best moments captured by your phone's camera.

The possibilities of modern smartphones are practically unlimited. However, not everyone has fancy gadgets, making do with conventional mobile phones. But even under such conditions, the transfer of multimedia files remains relevant. What to do if the subscriber does not have Internet services, and you definitely need to send him a photo or video? You can send him MMS to MTS for free!

How to connect MMS to MTS?

Most of the operator's tariff plans assume the use of the MMS service by default. MTS offers its users truly chic opportunities for transferring multimedia files. Send music, animation and pictures offline to subscribers who don't have internet on their mobile device.

The cost of MMS on MTS depends solely on the tariff plan and the subscriber's connected options. You can send MMS on the basic terms of your tariff, choose a special tariff with unlimited messages, purchase packages for 10, 20, 50 MMS messages, or use the "MMS plus" service.

If you plan to use the option often, activate a message package for a period of 30 days: 10 MMSok for 35 rubles, 20 for 60 rubles or 50 for 110 rubles. This will help you save money on sending multimedia files and use MMS to the full extent.

Setting up MMS on MTS

The MMS service is enabled by default for all MTS subscribers, but to send and receive multimedia messages from the phone, you need to configure it.

MMC setting can be done in automatic or manual mode.

To receive automatic settings, enter your phone number on the page http://www.mts.ru/settings/mms and click the "send" button, the settings will come to you in the form of SMS within a few minutes.

Manual MMS settings on MTS differ on different phone models and operating systems:

On Android early versions go to the menu "Settings" → "Wireless networks" → "Mobile network" → "Internet access points" and create a new access point - press "Menu" and select "Create APN".

For Android version 4 and above go to the "Settings" section, go to the menu "Other networks" → "Mobile networks" → "Access points" and create a new access point by clicking on the "+" in the upper right corner.

On iPhone 5 to connect MMS, go to the menu "Settings" → "General" → "Cellular data" → "Cellular data network".

On iPhone 6 MMS settings are located in the section: "Settings" → "Cellular" → "Cellular data network".

On Windows Phone OS go to "Settings" → "Data transfer" → "Add mms hotspot".

Apple iPad does not support MMS.

When creating a new access point (APN), enter the following settings:

If you do not have some fields for entering settings, skip them.

After creating a new access point and entering the settings, restart your phone and send a test MMS to the free number 8890.

If you cannot set up MMS on your own, contact the nearest office of the company, where they will definitely help you.

How to send MMS to MTS for free?

If you don’t have enough money on your phone or you don’t want to spend money on sending large files, use the official MTS website: https://sendmms.ssl.mts.ru - here you can use a special form send MMS to MTS from computer absolutely free.

You need to fill out the form: enter text, attach a file, indicate the recipient's number, your number (to confirm sending) and send a message to the user.

Attention! When sending MMS through the site, there are restrictions on the size of the transferred files (no more than 300 Kb) and the size of the text (no more than 1000 characters).

How to watch MMS on MTS?

Viewing multimedia files can only be carried out on phones and tablets with an MMS service connected and configured. A color picture will not open on an old "black and white" mobile phone or on a phone with an unconfigured MMS service. Such a subscriber will receive a regular SMS with a link to view a multimedia message via the Internet - on a special MTS mobile portal.

In order to view MMS on MTS via the Internet, you will need to follow the link indicated in the message and enter the password, or go to the MTS Personal Account http://legacy.mts.ru/legacies and see all your MMS there.

To see the sent file on a smartphone or mobile that supports the format, unzip or simply open it (if your phone is set to receive media automatically).

Related posts: