How to set an electronic alarm clock. Electronic desk clock alarm clock with temperature measurement function

I've been looking for an alarm clock for my room for a long time. I wanted something light or wooden, or both. I wanted backlighting so that I could calm down in the middle of the night, knowing how much sleep was left. Months of choice brought me to this watch.

Price almost at the time of purchase 180 rubles with discount (currently about 230)

Delivery time 1.5-2 months, everything came well packaged: a bubble bag and a box.

Why did I choose them?

Affordable price
Backlight
Alarm
Timer
Thermometer (both Celsius and Fahrenheit)
Possibility to choose alarm melody

Socket for 3 AAA batteries- little finger ones, easy to find, but work from 2(thrifty Chinese)

The watch is quite small, the size 12*6 cm.

There were also instructions in the box, but they were quite unclear. I have a decent level of English, but I’m not good with technology, so I spent several days figuring out the settings. To make your life easier, I want to briefly tell you how to set the date/time/temperature scale, etc.

So, let's set the time!

Click Mode , is displayed on the top of the display 24Hr . Click Up/Down - we see 12Hr. So we select a 12-hour or 24-hour time mode (by switching the buttons Up/Down )
After selecting the mode, press the button Set and set the time. I chose the 24-hour mode. The hour digits start flashing first. Again with buttons Up/Down We set the hour we need.
After setting the clock, press again Set and we are already setting the minutes.

Setting the date.
1. Immediately after setting the minutes, press Set and lights up year. Originally this is 2009. It also blinks, so the buttons Up/Down set the desired year.
2. Click Set , the second part of the display is already blinking. Install first month.
3. Click Set and choose what we need number. All digit switches are controlled by buttons Up/Down .
4. When you have set today's date, on the third part of the board you can see day of the week. If this is indeed the day, then congratulations, you did everything right.
  
  Setting an alarm.
  It's not that simple. Even if you didn't set the alarm yourself, you'll still have to get up to turn it off. The fact is that it is automatically installed on 0:00 , so it will ring at midnight.
  P.S. If you are not going to use the alarm on this watch, then when the format appears in the menu ALARM -:-- do not press under any circumstances Set.
  So, let's proceed directly to the installation.

Talking clocks come in a variety of versions: wristwatches, tabletops, and keychain watches. The variety of form factors also determines the variety of control options. Below are instructions for a version of a talking clock with four control buttons.

Legend

S1, S2, S3, S4 - Control buttons;
“di” is a short beep that the watch can emit during adjustment.

Note: In different watch models, control buttons may be located differently.

Brief description of the functions of the control buttons

Press the S1 button to announce the current time;

Current time broadcasting can operate in the following modes:

12-hour broadcast system;
24-hour broadcast system;
Hourly announcement of time from 7 am to 9 pm (7-21 in a 24-hour broadcast system).

Press the S2 button to set the time, alarm clock, hourly time announcement mode and turn on/off the alarm clock and hourly time announcement mode.

Press S3 button to select the alarm melody and to adjust the minutes in time setting mode and alarm setting mode.

Press the S4 button to adjust the clock in time setting mode, and to switch between 12 and 24 hour broadcast systems.

Setting up 12 and 24 hour broadcast systems

The S4 button is responsible for switching the talking clock between modes of voicing the current time in 12-hour and 24-hour formats.

Press the S4 button, if there is no sound signal, then the clock is switched to a 24-hour broadcast format. Then press the S1 button to speak the time and make sure the selected setting works.

If, when you press the S4 button, you hear a “di” sound signal, it means that the current time audio mode is turned on in a 12-hour broadcast format. Press the S1 button to speak the time and make sure that the selected setting works.

Continue to perform the steps described above until you set the desired sound mode for the current time.

Time setting mode

Press button S1 to check the correct time. If the time is not set accurately, follow the instructions below:

Press the S2 button (a “di” sound signal will appear);
After completing the time setting, wait 5 seconds until the “di” sound signal appears, which means the settings taken into effect;
Press S1 button to check the current time.

If the announced result does not meet your expectations, repeat setting the current time of the talking clock again.

Alarm setting mode

Press the S3 button to select the alarm melody, continue until you hear the desired melody;
Press the S2 button twice (a “di” sound will sound);
Press button S4 to set the desired number of hours. Each subsequent press increases the number of hours by one;
Press the S3 button to select the desired number of minutes. Each press increases the number of minutes by one;
After completing the time setting, press S1 button to check the alarm time;
To finish setting the alarm, wait 5 seconds until the sound signal “di” appears;

To cancel or activate a previously set alarm, press the S2 button three times (a triple “di” sound will appear). then press the S3 button, if you hear a “di” beep, then the alarm is activated. If there is no beep, then the alarm is turned off

Press the S3 button until you select the desired mode, then wait 5 seconds until the “di” sound appears, indicating that the alarm settings are saved.

Setting the hourly time mode

Press the S2 button three times (you will hear a triple “di” beep);
Press the S4 button (a “di” sound signal will appear), which means activating the hourly time mode. Attention! The time will be spoken every hour, regardless of the time of day;
Press the S4 button again (you will hear a double beep "di"), which means activating the hourly broadcast mode from 7 am to 9 pm;
Press the S4 button again (a loud and short “di” sound signal will appear), which means turning off the hourly time mode.

For questions regarding training in the use of technical means of rehabilitation, please contact us in any way convenient for you from those listed on the page.

Nata Karlin August 15, 2018, 12:49

It often happens that the clock mechanism malfunctions and the watch begins to lag behind the exact time or, on the contrary, to rush. That's when knowing how to set your watch will come in handy to eliminate chaos from your daily routine. Great if the mechanism has already been adjusted, and you again know exactly what time it is.

Man with a watch on his hand

How to set up an electronic LED clock?

In the era of minimalism and affordable things, many people buy electronic wristwatches from China in regular stores or on Aliexpress. Despite the simplicity of the system, the operating instructions written in Chinese are unlikely to help in setting up and regulating the functions of the device. The most famous of these devices is the LED clock more similar to bracelet. However, these devices are equipped with one button, with which you can set the date and time. In fact, setting up this device with 1 button is quite simple:

Press the button for a couple of seconds until the numbers start flashing.
Using precise pressure on the button, first set the current hour.
Press the button again and wait until the minute indicators start flashing.
By point-pressing the button, set required number of minutes.
Repeat the same procedure to set the current date.

Rules for setting LED clocks

LED watches can be confusing for many, because the panel shows LEDs of different colors, located at the right place on the dial at any given time. Typically, white represents hours and blue represents minutes. The entire plane of such a device is one big button.

LED watch in the form of a bracelet

You can also set the time on the LED clock quickly and easily:

Tap the screen with your finger 10 times.
Set the current hour by dragging the white LED to the desired position.
Hold your finger on the screen for a second and also drag the blue arrow to the desired location.
If necessary The watch can independently cancel the settings mode, if you leave them in standby mode. However, it is better to touch the screen with your finger for 5 seconds and remove the device from the settings.

How to set up an electronic clock

Setting up an electronic watch with 4 buttons may vary, depending on the class, model and manufacturer of the device. For detailed instructions, it is best to contact the manufacturer. However, it is rare for such documents to be stored for a long time.

To facilitate the process of setting up electronic watches, many manufacturers try to make special inscriptions to indicate the functions of each button

As a rule, they are written in English:

« MOD» — button for switching main setting modes;
« LIGT» — screen backlight function;
« SET»—change the setting value;
« START» — start and cancel the timer/stopwatch;
« RESET» — reset all set parameters to the initial value;
« SELECT» — options for selecting switching or changing parameters;
« DATE» — setting the date;
« LAP» — when the stopwatch is on, this button can be used to indicate the lap completed;
« ADJUST» - denotes the function of enabling settings, with which you can adjust one or another mode;
« REVERS» — allows you to return the settings to the previous value;
« FORWARD» is the opposite button to the previous one, moving the setting one stage forward.

Electronic watch on hand

To set the time on a four-button electronic watch, follow the simplest instructions:

Click the button that says " MODE"and hold until the numbers on the dial flash.
Click the button SET» and one of the two remaining buttons to increase or decrease the digital hour.
Click the button again MODE"and do the same operation with minutes.

Setting up an electronic clock with 3 buttons is not much different from setting up a four-button device. To set the date and time, follow the simplest recommendations:

Click the button MODE» and wait until the colon flashes on the screen.
Next, click the “ DATE", the hour display should flash.
Button " SET» set the desired hour.
Then press the button again DATE", the minute indicator will flash.
By clicking on the " SET» adjust minutes.

Women's watch, SL (price on the link)

How to properly adjust the speed of a mechanical wristwatch?

Modern manufacturers of luxury watches are increasingly focusing their attention on mechanical devices. The fact is that they have a lot of advantages compared to electronic options. First of all, these include high aesthetic characteristics.

Mechanical watches are equipped with a number of additional functions - shockproof, waterproof, etc.

In addition, the owner no need to monitor the battery level, it is enough to regularly wind up a reliable mechanism to always know the exact time.

Before you begin the setup process itself, you need to determine whether the mechanism is ahead of or behind the exact time indicators. An error ranging from 40 to 60 seconds is considered quite acceptable and does not require precise adjustment of mechanical devices.

The principle of setting a mechanical watch is as simple as it was many years ago. The entire process is carried out using a single wheel located on the side of the device body.

Women's watch with crystals on a ceramic bracelet, SL(price on the link)

Carefully grasp the wheel and pull it away from the body until it clicks. Try not to apply force so as not to damage the mechanism.
Rotate the wheel forward and backward, setting the correct time.
By lightly pressing the wheel, drive him back without moving the clock hands.

Wind the watch by turning the wheel forward until it stops. Don't overdo it: Generally, 6 to 8 turns are needed to fully wind it.

If your quartz watch is running fast or slow, just check the battery size and buy a new battery. Then remove the wheel from the side of the case until it clicks, set the arrows to the desired time and latch the mechanism.

Women's watch with calendar on a metal bracelet, SL(price on the link)

Tips and tricks for using and adjusting mechanical watches

The best way to set the time on the dial is rotate the wheel arrows in the forward direction. Some models display the date and other options on the dial. For such devices, there are setup instructions from the manufacturer. For example, the date on a mechanical men's watch is adjusted using the same wheel, only the device has two of them, and if there are additional functions, three.

If you feel that you have wound the clock mechanism completely, try to return the wheel back a couple of turns, and then forward again

This the process ensures proper distribution of lubricant on mechanisms and reduces wear of parts.

When setting the date, time and other options, do not make quick movements with the wheel, because these devices are very sensitive to adjustment and can easily break down if manipulated sharply. The watch is wound up only if necessary. The frequency of replanting should be indicated in the operating instructions for the device.

Men's skeleton watch with leather strap, OKAMI(price on the link)

If you feel that the hands are moving with difficulty, the watch has become slow or too fast, and you have to adjust it regularly, this is a reason to contact a watchmaker. A professional will not only help you repair your favorite device, but will also tell you how to properly care for it so that it does not break down for a long time.

A significant part of electronic watches is manufactured abroad. By ordering them from well-known companies, people receive high-quality and durable electronic watches, the instructions for which do not contain Russian text. Electronic wristwatches contain many functions, but they only have two buttons, which can be confusing when you need to set them up. In fact, everything is not as complicated as it might seem.

How to set up an electronic clock?

This is done quite simply. Usually in electronic wristwatches the first button is labeled with the word “mod”. It is needed in order to switch device functions, which include settings. The other button is called "set". It is she who changes the value selected by the first button.

So, to set the time, you need to press the first button. This will cause the number displaying the hour to flash. Now you need to press the second button, and the number will change. When the required value is set, you need to press the first button again so that the minutes flash. They are configured in the same way as the clock, by pressing the second button. Now that the time is set correctly, you need to press the first button again to exit the setting mode.

Sometimes electronic watches have not two buttons, but four. In this case, setting them up is even easier; you also need to press the “mod” button, and then, when the clock numbers flash, press first “set” and then one of two additional buttons. The first (top or left, depending on the model) increases the value, the second - decreases. After this, you need to click on “mod” again and do the same steps with the minutes.

How to set up an electronic clock if there are even more buttons?

In this case, it is better to follow the instructions. Typically, additional watch buttons call up an electronic thermometer, calendar or stopwatch; they simply display them, but do not adjust them. To configure, you need to press the “mode” button several times, scrolling through function by function. When the required option is displayed, you can begin setting using the “set” button. Electronic watches allow you to configure everything that it contains in this way: time, date, alarm, stopwatch, etc.

Setting an alarm on an electronic watch

Almost all electronic watches have an alarm. To start it, you need to press the first button several times, thus reaching the “alarm” inscription. The time is set as described above, the alarm is started and turned off by switching using the “set” button in the “on/off” field.

When buying chronographs abroad, owners are faced with the question of how to set the time on an electronic watch. The operating instructions for them are written in a foreign language, so sometimes it is difficult to understand the settings. Standard digital watches have only two buttons for settings "MOD" And "SET". The first one is used to switch setting modes, i.e. date, time, alarm clock and more. The second is responsible for changing parameters and saving them.

Settings

How to set the time on an electronic clock using the MOD and SET buttons:

Hold MOD for a short time. The field being edited will begin to blink. If several fields are blinking at once, with one click on MOD you can switch to the required field.
Using SET we set the necessary parameters. The values can be changed by pressing the button multiple times.
Using MOD, switch to the next field and also using SET, change the values to the required parameters.
Once completed, press MOD to exit settings mode.

This instruction is about how to set up a digital watch with 2 buttons. However, there are cases when additional buttons are installed on digital devices. Usually on such watches they serve as a value switch up and down. How to set up an electronic clock in this case? Much simpler:

Use the steps above.
After pressing MOD you will switch between modes.
After moving to another field, press SET to begin changing parameters.
By pressing additional buttons on the other side of the watch, change the values. The top button increases the number, the bottom button decreases.
When finished, press SET and switch mode. When you are finished changing the settings, press MOD to exit.

How to turn on and off the alarm on an electronic watch?

How to turn off an alarm on an electronic watch? This function is designated “ALARM” on the watch. In order to enable or disable it, you need to use the MOD button to find a field with such an inscription and use SET to change the set value. OFF – turn off, ON – turn on.

Slap watch "Pulse"

Water protection

Caring for your watch

1. Clock (hour, minutes, seconds) and date
2. Stopwatch
3. Alarm clock

The "B" button switches between editable parameters. The numbers are changed using the "C" and "D" buttons. Go back to the current mode - button "B".

Setting the time and date:

In time display mode, press the “B” button 3 times, then use the “C” and “D” buttons to set the current time and date. To return to normal mode from the setup mode, press the "B" button.

Select between 12/24 hour time display - button "D"

Stopwatch:

In normal time display mode, press button "B" 2 times, start the stopwatch with button "D", stop the stopwatch with button "D". Reset the stopwatch: after it stops, press the "C" button.

Alarm:

In the time display mode, press the “B” button once, then use the “C” and “D” buttons to set the hours and minutes. When the alarm clock is activated, the alarm clock symbol will appear on the clock dial. To turn off the alarm, press the "B" button once, then press the "D" button. The alarm symbol should disappear from the watch dial.

To return to normal mode from the setup mode, press the "B" button.

Backlight:

Button "A" turns on the backlight of the clock dial. The backlight is active when the "A" button is pressed and held. If you do not press any button within three seconds, the clock backlight will automatically go out.

Watch "Fast sport"

Battery

Water protection

Caring for your watch

When you are not using your watch, store it in a dry place.
The chemical reactions caused by these materials cause damage to the gaskets, case and polish of the watch display.

Turning on the clock
The clock is turned on by pressing any of the three buttons once ("A", "C", "D"). By pressing Button "A" you can switch between modes in the "Current mode" in the following sequence:
- time (hours, minutes)
- date (month, day)
- seconds
Setting the clock
In the "Current mode" press the "B" button - the parameter being edited will begin to blink and you need to use the "A" button to set the desired position of the numbers. Next, use the “B” button to select the appropriate parameter and continue editing with the “A” button.
The clock display is configured in the following sequence:
1. Clock (1-24)
2. Minutes (01-60)
3. Month (1-12)
4. Day (1-31)
5. year (00-99)
6. Time system (12 or 24 hour)

Watch "Electronic sports"

In the "Clock" mode you can edit:
- seconds
- watch
- minutes
- year (in the current mode this parameter is displayed as the day of the week)
- month
- date
The transition between 12 and 24-hour time systems is carried out with the LIGHT/RES button.

In the "Alarm clock" mode the following can be edited:
- watch
- minutes
- month
- date

In the "Additional hours" mode the following can be edited:
- watch
- minutes
In this mode, an additional time is configured, above which the main time will always be displayed.
In the "Timer" mode you can edit:
- seconds
- minutes
- seconds
The transition between the "AUTO" and "MANUAL" modes is carried out with the LIGHT/RES button.
In Stopwatch mode:
Start and stop - ST-STOP button, reset - LIGHT/RES button.

Watch "Future"

Turning on the clock
The watch is turned on by pressing either of the two buttons once. Button "A" turns on the animated backlight of the clock, button "B" turns on the usual static backlight. By pressing the “A” button, the “Current mode” switches between modes in the following sequence:
- time (hours and minutes) - P
- date (month and day) - D
- day of the week - W
Setting the clock
The display is configured by successively pressing the “B” button and then the “A” button.
There are two ways to switch to editing mode:
Option 1. Press the top, then the bottom button.
Option 2. Press the bottom button twice.
The parameter being edited will begin to blink and you need to use the “A” button to set the desired position of the numbers. Next, use the “B” button to select the appropriate parameter and continue editing with the “A” button.
:
1. Hours (1-12)
2. Minutes (05-60 in 5 minute increments, four square dots in the center of the clock display will be used to set 6, 7, 8, 9 minutes)
3. Month D (1-12)
4. Day D (1-31)
5. Day of the week W (1-7)
6. Display backlight brightness (4 levels): adjustable by selecting the number of square dots
7. Display backlight time 60 (05-60 seconds)
If you do not press any button within five seconds When a value is flashing, the clock backlight automatically goes out. The screen turns off automatically after a specified time interval (05-60 seconds in 5 second increments).

Watch "Leg"

Battery
The battery in the watch you purchase is factory installed and should be replaced at the first sign of power failure.
Water protection
The watch is not protected from water. Avoid exposure to any moisture.
Caring for your watch
Never attempt to open the case or remove the back cover.
The rubber gasket that protects the watch from water and dust should be replaced every 2-3 years.
If moisture gets inside your watch, have it checked immediately by your nearest workshop.
Do not expose your watch to extreme temperatures.
Although the watch is designed to withstand normal use, you should avoid rough handling or dropping it.
Do not fasten the strap too tightly. It should fit through your finger between your wrist and the strap.
To clean the strap, use a dry, soft cloth, or a soft cloth dampened with a mild, neutral detergent and water solution. Never use products that evaporate easily (eg benzene, solvents, spray cleaners, etc.).
When you are not using your watch, store it in a dry place.
Avoid contact of the watch with gasoline, cleaning solvents, spray aerosols, adhesives, paint, etc.). The chemical reactions caused by these materials cause damage to the gaskets, case and polish of the watch display.
The clock is turned on by lightly touching the display:
1 time - time (hours, minutes)
2 times - date (month, day)
3 times - seconds
Setting the clock
1. Lightly touch the display to enter the “Current time” mode.
2. Touch and hold your finger in the center of the display - the parameter being edited will begin to blink. Now you need to change the numbers with light touches. Next, use repeated long touches of the display to switch from mode to mode and continue editing with light, short touches.
:
1. Hours (1-12, A-am or P-pm)
2. Minutes (00-60)
3. Y (00-100)
4. Month D (1-12)
5. Day D (1-31)
(do not touch the display), the clock automatically returns to the “Current Time” mode and the blinking stops.
If you do not press any button within five seconds When a value is flashing, the clock backlight automatically goes out.

Watch "Original"

When you are not using your watch, store it in a dry place.
Avoid contact of the watch with gasoline, cleaning solvents, spray aerosols, adhesives, paint, etc.).

Turning on the clock
The watch is turned on by pressing either of the two buttons once. By pressing the "A" button, the "Current mode" switches between time (hours, minutes) and date (month, day).
Setting the clock
Press button "A" to switch from mode to mode:
1. Current time mode
2. Date mode
Setting the time on the digital display:
1. Press the "A" or "B" button to enter the "Clock Time" mode, then press and hold the "B" button in the "Current Time" mode until the hour value flashes.
2. Using the "B" button, you move between sections in the following sequence:
- watch
- minutes
- month
- date
3. Press button "A" to move the flashing value from digit to digit to set the desired position of the digits.
If you do not press any button within five seconds When a value is flashing, the clock backlight automatically goes out.

Watch "Touch"

Battery
The battery in the watch you purchase is factory installed and should be replaced at the first sign of power failure.
Water protection
The watch is not protected from water. Avoid exposure to any moisture.
Caring for your watch
Never attempt to open the case or remove the back cover.
The rubber gasket that protects the watch from water and dust should be replaced every 2-3 years.
If moisture gets inside your watch, have it checked immediately by your nearest workshop.
Do not expose your watch to extreme temperatures.
Although the watch is designed to withstand normal use, you should avoid rough handling or dropping it.
Do not fasten the strap too tightly. It should fit through your finger between your wrist and the strap.
To clean the strap, use a dry, soft cloth, or a soft cloth moistened with a mild, neutral detergent and water solution. Never use products that evaporate easily (eg benzene, solvents, spray cleaners, etc.).
When you are not using your watch, store it in a dry place.
Avoid contact of the watch with gasoline, cleaning solvents, spray aerosols, adhesives, paint, etc.).
Turning on the clock
The watch turns on by lightly touching the display once. By touching again, the “Current mode” switches between time (hours, minutes), date (month, day), seconds.
- time (hours/minutes)
- date (month/year)
- seconds
Setting the clock
1. Lightly touch the display to enter the “Current Time” mode.
2. Touch the right side of the display near “SET” to enter “Edit Mode”. The parameter being edited will start flashing. Now, lightly touch the left side of the display near “MODE” to change the numbers.
3. Next, by repeatedly touching the right side of the display near “SET,” you can switch from mode to mode. Editing continues with light touches or a continuous touch on the left side of the display near "MODE".
The clock display is configured in the following sequence:
1. Clock (1-12/1-24)
2. Minutes (00-60)
3. Month (1-12)
4. Day (1-31)
5. Year (2001-2099)
6. 12 or 24 hour time display system
If you make no changes in edit mode(do not touch the display), the clock automatically turns off.
If you do not touch your watch within three seconds, they automatically go out.

Clock "Data"

1. Clock (hour, minutes and seconds)
2. Stopwatch
3. Alarm clock
4. Date

The MODE button switches between edited parameters. The numbers are changed using the ST/SP and RESET buttons. Go back to the current mode - MODE button.

Setting the time and date:

In time display mode, press the "MODE" button 3 times, then use the "RESET" and "ST/SP" buttons to set the hours and minutes. By pressing the "RESET" button again, you enter the mode for setting the current date and day of the week. You can view the date in the current mode by pressing the "ST/SP" button.

Electronic watches are a stylish and practical accessory for daily use. The easiest way to set them up is usually contained in the instructions that came with the device upon purchase. If it is missing, you can search for documentation on the manufacturer’s official website, or use our recommendations outlined below.

How to set up an electronic clock - buttons

In this case, by electronic watch we will mean a device equipped with an LCD display that can work with programmable data display. For example, consider a watch from the popular brand CASIO, known all over the world. Almost all electronic devices of this type are controlled by buttons, the operation of which is worth devoting a separate paragraph to. These elements can respond to pressing:

launching settings;
switch modes;
turning on or off both the clock itself and individual functions;
resetting previously installed settings.

Configuration is easy to start by one-time or multiple clicks on one or several buttons at the same time, successive clicks or “drowning” with a delay. Pressing and holding is just typical for CASIO electronic watches, opening a list of settings. Then you can select the time, time zone, date, timer, sound signal, and so on. The duration of pressing can vary from 2 to 7 seconds, depending on the model. The same principle applies to the button to turn on the backlight.

How to set up an electronic clock - functions of an electronic clock using the example of CASIO DW-6900

This accessory is equipped with one front and four end buttons. Among them:

ADJUST (responsible for entering the settings and is located at the top left, recessed);
MODE (changes modes, located at the bottom left, the rest of the buttons are protruding);
SPLIT/RESET (performs the “Split” and “Reset” functions, respectively, located at the top right);
START/STOP (starts the “Start” or “Reset” functions, for example for a timer, located at the bottom right);
LIGHT (lower, front button that starts the backlight).

The entrance to the general settings does not open from any menu, but only from the current time mode (in fact, the most “normal” state of the watch, with the time, date and other service icons displayed). When the ADJUST button is pressed, wait for the second digits to flash and begin setting, changing the values using the buttons described above.

How to set up an electronic clock - setting the time

To understand in practice how to control an electronic clock, let's consider the process of changing the time, for convenience, designating the upper left button with the letter A, the upper right - B, the lower left - C, the lower right - D. Next:

Hold A until the seconds blink.
Press C several times to select daylight saving time, hour, minute, etc.
When the desired value is flashing, it is ready to be adjusted.
Press D to reset the counter to zero if the current values are between the numbers 30-59. This may be true - with values from 0 to 29 the counter will not reset to zero; you will have to add or subtract it manually.
Pressing D once will cause the number to increase, B will cause it to decrease.
When the correct value is set, press A to complete.

If your watch has regular hands, they should automatically sync with the electronic values. When this does not happen, press C and use it to scroll to the “H-S” function. Long press and hold A, waiting for the numbers to blink over time, then use D to adjust the arrows. Save the changes with button A.

Expensive watches always look respectable and prestigious. The accessory emphasizes the status of a person and, moreover, it is very convenient, since you do not have to ask strangers for the exact time.

But even the most expensive and popular models can sometimes fail, so it is necessary to carry out the correct setup immediately. To learn about this process, you can use step-by-step instructions, using the one that came with the watch.

Keys

It is known that many models of accessories have special keys that help you quickly and conveniently set the time yourself. This is no exception for the Casio brand.

So, on the watch you can find the following buttons:

mode. This key helps to configure all the necessary modes;
forward. Using this button, you can adjust the arrows by pressing forward;
adjust. Installation in progress.
reserve. If you need extra lighting, this key will definitely help you.

All these buttons are marked with letters, which will help you understand the correct installation.

Setup step by step

The first thing to do is set the time. When you press a key, different modes and beeps appear to indicate the transition from one function to another.

It is necessary to select the setting item, and then determine the exact match of the time using the arrows and the electronic indicator. If the numbers do not match, you need to use the adjustment key.

After this action, the hands will be at the twelve o'clock position. If this does not help, you will have to turn to manual mode using the adjustment and backlight key.

When the hands take the desired position in accordance with the time, you must press the set button.

The next step is the electronic indicator. To do this, you need to use the installation key again.

Location options appear on the segment. After this, it is best to use the instructions that came with the watch.
All the necessary settings will be indicated there, which will help set the correct parameters for a particular locality. After this, use the all modes control key.

If necessary, you need to deactivate the automatic setting and switching function.

After this, you must select the format in which the time is displayed.

How to set up your Casio watch, watch the video:

Electronic desk clock alarm clock with temperature measurement function

LCT047

GETTING STARTED

1. Open the battery compartment.

2. Insert 3 new AAA batteries according to the correct polarity.

3. Close the battery compartment.

4. Once the batteries are inserted, the LCD display will light up. The default time is 02:00.

Attention:

If the display does not light up, try changing the batteries or pressing the button RESET.

CLOCK SETTING BUTTONS

SNOOZE / LIGHT– press this button to turn off the ringing alarm. In any mode, press this button to turn on the clock backlight for 5 seconds.

MODE– press this button to switch from normal mode to alarm mode and back.

ALM ON/ OFF– In normal/alarm mode, press this button to turn on/off the alarm/alarm snooze mode.

ADJ- In normal mode, press this button to move to date/month/year. In setting mode, press this button to change the setting value.

°С/°F– press this button to select the temperature display format.

RESET– Click this button to reset all settings. If there are errors in the clock operation, you need to reset all settings and reset the clock.

CHARACTERISTICS

1. Alarm snooze/backlight button ( SNOOZE / LIGHT)

2. LCD display

3. Mode switch button ( MODE)

4. Alarm on/off button ( ALM ON/ OFF)

5. Set button ( ADJ)

6. Temperature mode format selection button °С/°F

7. Button RESET(reset)

8. Battery compartment cover

9. Stand

Arrangement of symbols on the display

Normal mode

4. Day of the week

5. Temperature

Alarm mode

1. Alarm time

2. Alarm icon

3. Alarm mode

4. Alarm snooze icon

SETTING THE TIME AND CALENDAR

1. In normal mode, press and hold the button for 3 seconds ALM ON/ OFF

2. Press the button ADJ

3. Repeat the above operation to set HOURS - MINUTES - SECONDS - 12/24 MODE - YEAR - MONTH - DATE.

SETTING THE ALARM

1. In normal mode, press the button ALM ON/ OFF once to turn on the alarm, the icon will light up « "; twice – the alarm repeat mode will turn on ( SNOOZE), the “ Zz"; three times – both the alarm clock and the snooze mode will turn on.

2. In normal mode, press the button MODE to set the alarm time.

3. Press and hold the button for 3 seconds MODE. The hour number will begin to flash.

4. Press the button ADJ to set the correct value.

5. Repeat the above operation to set the minutes.

Attention:

1. After turning on the snooze function, the alarm will ring 5 times within 60 seconds with a 5-minute break.

2. Press the button SNOOZE / LIGHT to stop the alarm from ringing and switch to snooze mode. Press the button if you want to not only stop the alarm from ringing, but also turn it off completely.

REPLACING BATTERIES

When the symbols on the display become dim, you need to replace the batteries – 3 pcs. type AAA.

ATTENTION!

Please dispose of used batteries in an environmentally friendly manner.