How to set a password for a wifi modem. Set a password for the router now

What could be more important in our time than protecting your home Wi-Fi network :) This is a very popular topic, on which more than one article has been written on this site alone. I decided to collect all the necessary information on this topic on one page. Now we will look in detail at the issue of protecting a Wi-Fi network. I’ll tell you and show you how to protect Wi-Fi with a password, how to do it correctly on routers from different manufacturers, which encryption method to choose, how to choose a password, and what you need to know if you are planning to change your wireless network password.

In this article we will talk exactly about protecting your home wireless network. And about password protection only. If we consider the security of some large networks in offices, then it is better to approach security there a little differently (at least a different authentication mode). If you think that one password is not enough to protect your Wi-Fi network, then I would advise you not to bother. Set a good, complex password using these instructions and don't worry. It is unlikely that anyone will spend time and effort to hack your network. Yes, you can, for example, hide the network name (SSID) and set filtering by MAC addresses, but these are unnecessary hassles that in reality will only cause inconvenience when connecting and using a wireless network.

If you are thinking about protecting your Wi-Fi, or leaving the network open, then there can only be one solution - protect it. Yes, the Internet is unlimited, and almost everyone at home has their own router, but eventually someone will connect to your network. Why do we need this, because extra clients are an extra load on the router. And if it’s not expensive, then it simply won’t withstand this load. Also, if someone connects to your network, they will be able to access your files (if local network is configured), and access to your router settings (after all, you most likely did not change the standard admin password that protects the control panel).

Be sure to protect your Wi-Fi network with a good password with the correct (modern) encryption method. I recommend installing protection immediately when setting up the router. Also, it would be a good idea to change your password from time to time.

If you are worried that someone will hack your network, or have already done so, then simply change your password and live in peace. By the way, since you will still be logging into the control panel of your router, I would also recommend , which is used to enter the router settings.

Proper protection of your home Wi-Fi network: which encryption method to choose?

During the password setting process, you will need to select a Wi-Fi network encryption method (authentication method). I recommend installing only WPA2 - Personal, with encryption algorithm AES. For a home network, this is the best solution, currently the newest and most reliable. This is the kind of protection that router manufacturers recommend installing.

Only under one condition that you do not have old devices that you want to connect to Wi-Fi. If, after setting up, some of your old devices refuse to connect to the wireless network, you can install a protocol WPA (with TKIP encryption algorithm). I do not recommend installing the WEP protocol, as it is already outdated, not secure and can be easily hacked. Yes, and there may be problems connecting new devices.

Protocol combination WPA2 - Personal with AES encryption, this is the best option for a home network. The key itself (password) must be at least 8 characters. The password must consist of English letters, numbers and symbols. The password is case sensitive. That is, “111AA111” and “111aa111” are different passwords.

I don’t know what router you have, so I’ll prepare short instructions for the most popular manufacturers.

If after changing or setting a password you have problems connecting devices to the wireless network, then see the recommendations at the end of this article.

I advise you to immediately write down the password that you will set. If you forget it, you will have to install a new one, or .

We protect Wi-Fi with a password on Tp-Link routers

Connecting to the router (via cable or Wi-Fi), launch any browser and open the address 192.168.1.1, or 192.168.0.1 (the address for your router, as well as the standard username and password are indicated on the sticker at the bottom of the device itself). Provide your username and password. By default, these are admin and admin. In , I described entering the settings in more detail.

In settings go to the tab Wireless(Wireless mode) - Wireless Security(Wireless Security). Check the box next to the protection method WPA/WPA2 - Personal(Recommended). In the drop down menu Version(version) select WPA2-PSK. On the menu Encryption(encryption) install AES. In the field Wireless Password(PSK Password) Enter a password to protect your network.

In the settings we need to open the tab Wireless network, and make the following settings:

In the "Authentication Method" drop-down menu, select WPA2 - Personal.
"WPA encryption" - install AES.
In the "WPA Pre-Shared Key" field, write down the password for our network.

To save the settings, click the button Apply.

Connect your devices to the network with a new password.

Protecting your D-Link router's wireless network

Go to the settings of your D-Link router at 192.168.0.1. You can see detailed instructions. In settings, open the tab WiFi - Security Settings. Set the security type and password as in the screenshot below.

Setting a password on other routers

We also have detailed instructions for ZyXEL and Tenda routers. See the links:

If you haven’t found instructions for your router, then you can set up Wi-Fi network protection in the control panel of your router, in the settings section called: security settings, wireless network, Wi-Fi, Wireless, etc. I think I can find it it won't be difficult. And I think you already know what settings to set: WPA2 - Personal and AES encryption. Well, that's the key.

If you can't figure it out, ask in the comments.

What to do if devices do not connect after installation or password change?

Very often, after installation, and especially after changing the password, devices that were previously connected to your network do not want to connect to it. On computers, these are usually errors “The network settings saved on this computer do not meet the requirements of this network” and “Windows could not connect to...”. On tablets and smartphones (Android, iOS), errors such as “Could not connect to the network”, “Connected, protected”, etc. may also appear.

These problems can be solved by simply deleting the wireless network and reconnecting with a new password. I wrote how to delete a network in Windows 7. If you have Windows 10, then you need to “forget the network” using . On mobile devices, press and hold your network and select "Delete".

If connection problems occur on older devices, then set the WPA security protocol and TKIP encryption in the router settings.

Gone are the days when the Internet was connected to a PC only through a wired connection. Now all modern gadgets support the Wi-Fi function and can work in a wireless network just as well as with a direct wired connection! In almost every apartment, a special device, a router, is used to meet Wi-Fi needs. These networks are mainly used for home or office services.

Content:

A wireless network can extend over tens of meters, depending on the power of the router. And to prevent uninvited guests from using your traffic, you need to know how to password protect your Wi-Fi router.

How to set a password on a wifi router (password)?

In this article we will look at the principle of changing the password, because regardless of the manufacturer, be it Asus, D-link, TP-link, Zyxel, it is identical. All the settings you set can be easily changed, and even easier to reset to factory settings. It is necessary to realize the importance of this action, because all devices are connected to a common local network and data can be accessed. To prevent this from happening, you must protect the network with a password!

Changing the router settings is done through the web interface. On the same label, on the back cover of the router, “site” is written, which consists only of numbers and dots (usually 192.168.1.1 or something similar). It must be entered into the address bar of the browser you use to view web pages. A window will open in front of you, where you need to enter the factory login and password indicated on the same label on the back of the router. By default they are set to “admin and admin”, respectively. Once you have entered this data, press the “Log In” button.

If someone changed the factory login and password of your router, or you simply forgot it, you can click the Reset button to return all the router settings (including the login and password to access its settings) to the original (default) ones. Usually the Reset button is pressed in and to press it you need to arm yourself with a match or a toothpick.

So, a site map has opened in front of you - this is the main menu for managing the router. Your task is to find the Security tab. After this, we will be taken to a page where you will need to find fields called “Password” and “Confirm the password”. Your task is to write the password you created in each field. We’ll tell you a little later which password is best to create to protect your network.

After you have written a new password in the two corresponding fields, press the Save Setting button. Ideally, change the login value by changing the standard “admin” to “hamer17” (for example), this way the router will be more protected from hacking - now you know how to set the wifi password.

Some users, after all the steps taken, are wondering how to change the wifi password. Yes, exactly the same way as putting it on! You need to log into the site map using your password and login. And in the Security tab, write a new password value, saving it, that’s all!

Even after changing the router password, do not forget to look and use it for free!

What password should I choose for WiFi?

This is the most important point regarding the protection of the entire wireless network system. There are often cases of hacking a Wi-Fi password by simply guessing it. Those. You need to use a password that no one will guess and that is difficult to guess. By the way, there are many programs for cracking (bringing) passwords, but even they will not be able to unravel a complex password; finding a complex password will take them several decades. So, consider the basic principles of creating a password:

Do not use a primitive password, discard the options qwerty or 12345 and the like!
The password must contain both numbers, letters, and special characters (*, %, #, etc.), then it is much more difficult to crack.
Use information that is not related to you. Those. year of birth or address of the house where you live is not suitable for a password.
When creating a password, consider the case of letters. In other words, the password must contain both lowercase and uppercase letters.

Attention! Your password must not be less than eight characters!

If you use the data, you can protect your wireless network 100%. That's all, the question turned out to be: “How to set a password for wifi?” not so difficult! Good luck in this difficult task!

3 more useful articles:

We quickly determine the number of devices connected to the WiFi network (in two different ways), configure the rules for limited and...

How to find out the password for your Wi-Fi? Surely, many people asked this question because they forgot...

Each of us probably knows that if there is a Wi-Fi point at home, there must be a password on it in order to protect your network from third-party connections or even hacking. But since most users do not know how to set a password for Wi-Fi, many points remain simply free and publicly accessible, which is a tasty morsel for lovers of free Internet.

Why set a password for Wi-FI and what can be the impact of not having one? First of all, by setting a password for Wi-Fi, you will protect your network from hacking. But, since in most cases users do not store anything important on their computer except photos, it is unlikely that such a local network will have any value for a hacker. True, you still don’t need to leave your network unprotected.

Why? Give at least in order to block access to our Internet to various free WI-FI signal catchers who strive to catch and connect to it. Yes, your Internet traffic may be unlimited, but this does not mean that you have to pay and everyone else can use it.

What will such connections affect? The first thing you will notice when you have a large number of connections to your wireless network is a deterioration in the quality of the Internet. Then, when downloading or watching movies online, the speed may be very low. And finally, the connection is not stable ( Internet keeps disconnecting and connecting).

Therefore, in order to save yourself from unexpected problems, I recommend that you be sure to set the password in . But, if you forgot to do this, or the wizard did not set it for you, then read on and you will learn how to set a password for WI-FI, spending a minimum of time on it and without messing up the rest of the router settings.

Setting a Network Password on D-Link

In order to set a password for Wi-Fi, you need, as always, to log into the router using the standard IP address that is indicated on a piece of paper stuck on the device.

So, by writing in the IP address line ( By default in D-Link it is 192.169.0.1, and in TP-Link, Zyxel, Asus: .1.1), press “Enter” and try to enter the router settings using the standard user “admin”. Well, the password is either similar to the account, or just an empty string. If you changed your password to your own and forgot it, then this article will help you correct this misunderstanding.

In the left menu click on “ WiFi", since we will set a password specifically for the Wi-Fi network. Then, in the tabs that open, find the third item “” and click on it. After which, we will be taken to the wireless network security settings window.

Now everything is in order. In the security certificate field, select “WPA2-PSK”, since this certificate is the most reliable and more advanced in terms of security. If you don’t have WPA2, then look for “WPA/WPA2 mixed”, this certificate is also considered good. And only if there is no WPA2 certificate at all, I recommend installing “WPA-PSK”.

The password must be at least eight characters long;
It is recommended to use capital and small letters;
Use numbers in your password;
Come up with a word that will remember you;

What not to use when changing the password for a Wi-Fi network:

Do not under any circumstances use your date of birth, room number, or telephone number in your password;
Do not use the most popular and simple passwords ( Qwerty, qwerty123,12345678,1q2w3e4r5t, etc..);
Do not create a password with the names of yourself or family members, or with the names of pets;
Do not set your Wi-Fi password using the same or repeated characters ( 1111111, 118822773366, aaaaaa, etc..);

In the encryption settings, mark “TKIP” and click the “Change” button.

In order to set a password for Wi-Fi, the last step we have left is to save and restart the router. To do this, look in the upper right corner and point the bear at “System” where a drop-down menu will appear in which we select “Save and reload”.

By clicking “OK” in the notification window that appears, we wait for the device to reboot.

Please note that after you have set a password for Wi-Fi, you will need to reconnect to it with all devices ( phones and laptops) first by entering a new password. I also recommend reading the article “ , if such a problem suddenly appears after you set a new password for Wi-Fi.

In an office or at home, using a powerful router is the only solution to provide Wi-Fi indoors, or simply to provide Internet access to several computers. However, due to general computerization, any other user who is within sight of your connection can connect to your Wi-Fi network. To prevent this from happening, network security must be ensured with a wi-fi password. Today in the new material of our IT blog we will talk about how to set a password on a Wi-Fi router.

Since there are a lot of router models on the market now, and the procedure presented below is different for each brand, it is actually not possible to cover all of them. However, there are similarities in the presented methodology, and if you understand one of the devices, setting a password on a router of another brand will no longer be any significant problem for you. Today we will talk about the features of setting a password for a secure network for branded routers ASUS And D-Link.

How to set a password on an ASUS Wi-Fi router?

Over the past two or three years, ASUS routers have been penetrating deeper into the business industry of developing countries and occupying a significant niche in their sector, becoming increasingly popular. Due to these circumstances, we decided to cover in our instructions the principle of password protection of a network based on an ASUS router.

To access the device settings, we first need to go to the router's web interface. You can open it by entering a specific IP address in the address bar of your web browser. To find out what this address is, take the router in your hands and turn it upside down - the bottom panel should indicate the IP address for accessing the device’s web interface, as well as the default login and password. The most commonly used ip is 192.168.1.1 or 192.168.0.1, and the login and password are admin. If this is your first time logging into settings, these are the values you should use to log in.

If your router has already been configured before, this data may have been subsequently changed, and you will have to find out how to enter the router settings now. If this is not possible, you will have to reset all the parameters of the router and configure it from scratch by picking up a regular pen, pencil, knitting needle, or any object with a fine tip, and holding down the Reset button located on the panels at the back. Sometimes this button is not made in the form of a recess, but in the form of a regular convex control that can be pressed with your finger.

Further configuration of the router is a topic for a separate discussion, which we have already discussed. We will only focus on the nuances associated with specifying a password for a secure network.

So now essentially how to set a password on a router? After entering the designated IP address, an invitation form appears on the screen where you need to enter authentication data.

When the data is entered, click the “Login” button and log in to the device’s web panel. Now we have access to all the router settings and, of course, we will immediately begin entering a new or replacing the previous password. We remind you once again: this step assumes that your router is fully configured, is working properly and does not require changing any settings. If this is not the case, refer to our material at the link above, which describes in detail how to set up a new gadget if you have just purchased it.

Let's take a look at the Client Status mini-form on the web dashboard home page. It is here that we can specify the network name, security protocol, and, of course, the key, which in other words is called a password.

In the “Authentication Method” field, select the “WPA2-Personal” protocol, since it is most popular among users and is the least vulnerable to hacking. Now, what we actually needed, enter the network access password in the “WPA-PSK Key” field. Come up with a password that includes uppercase and uppercase letters, as well as several numbers. This key is the hardest for an attacker to guess, and, therefore, your network will be the least susceptible to hacking from the outside. When all the data has been entered, click the “Apply” button and reboot the router, not forgetting to first save all the changes made.

To reboot the device, click the “Reboot” button at the top of the web panel.

Wait 60 seconds and connect to your network with the new password you set.

If the web interface shown in the figure is slightly different from yours, you can also set a password for the Wi-Fi router on the “Wireless Network” tab. Here we similarly indicate the value of the “Authentication Method” and “WPA Pre-Shared Key” fields, setting here the same values described a little earlier. Then we reboot the device in the same way.

How to set a password on a D-Link Wi-Fi router?

In a similar way to the ASUS model, we look at the bottom wall of the D-Link gadget and remember the IP address for logging into the router’s web panel, as well as authentication data.

We enter the desired IP in the address bar of the web navigator (in our case, it is 192.168.0.1) and indicate a known login and password.

In the hierarchical tree of parameters, select the Wi-Fi branch and in it open a node called “Security settings” (in Russian, this node will be called “Security Settings”).

Now about the main thing, how to set a password on a Wi-Fi router. In the first field at the top, “Network authentication” (in other words, “Network authentication”), select the “WPA2-PSK” option among other settings. This parameter is similar to the WPA2-Personal option that we specified for the ASUS router.

The network name can be viewed or changed in the Wi-Fi -> Basic settings branch. The SSID field is responsible for this.

If your firmware version on a D-Link router differs from the one presented in our instructions, most likely, the settings menu will have a similar appearance, and you will just have to enter the menu item with the same name and there yourself find the parameters responsible for network authentication the network being used.

As you can see, there is also nothing complicated about how to set a password on a D-Link Wi-Fi router. You just need to know the IP address to enter the settings menu, authentication data and the names of the menus containing the items we need. Figuring this out on your own is not difficult. We wish you to learn how to configure the router yourself, which will minimize your costs and provide additional skills, and this will never be superfluous.