Restoring your computer to its previous settings. Restore old computer settings

Due to the presence of viruses, driver or software mismatches, the OS may malfunction. If your Windows crashes, don’t rush to panic. The situation can be corrected by returning the state of files and programs to the moment when the PC was working properly.

While running OS Windows 7, 10 or 8, certain errors and problems may occur. As a result of such failures, starting the operating system again in operating mode becomes impossible. In this case, it is not at all necessary to do a time-consuming reinstallation of the OS. All you need to do is perform a system restore.

Recovering the OS using the recovery environment

When working we use the following scheme of actions:

1. Reboot the computer, press the F8 key while loading;
2. Troubleshooting;
3. System restore, selecting an OS restore point;
4. Click "Next" and again "Next";
5. Press the button "Ready", we reboot the system (in the Menu, select boot with the last successful configuration).

Windows 7 System Restore

There are several methods you can use to get your OS running again. Some of them rely on rolling back to saved settings. Others simply clear the data.

You can “reanimate” the OS in one of the following ways:

• by selecting restore points;
• using the command line;
• through safe mode;
• using a recovery environment;
• using an image/boot disk.

Restoring the operating system using system “resuscitation” checkpoints is one of the most affordable, effective and popular options. To apply it, you need to make a series of clicks:

1. Panel "Start";
2. "System Restore";
3. "Next";
4. "Select a restore point";
5. "Ready".

With such an operation, problems with the computer will be corrected, changes will be canceled and the system will be returned to the operating state that allowed the PC to boot normally. There is no loss of data, files and documents with this type of recovery. All data is saved. The operation is reversible. You can roll back the system to a previous computer state and use a different restore point.

Many people wonder how to make a recovery point on their own (manually) in order to choose it in the future? To do this in the same menu "Start" - "System Restore" You can create such a point yourself at any time convenient and suitable for you. It will be saved indicating the current date, which you just have to remember.

From restore point

In computer engineering there is such a thing as a recovery point. These are saved PC settings. As a rule, saving occurs automatically with each successful OS boot. The easiest way to restore Windows 7 is to use this data.

Press F8 when your computer boots. This command will bring up a menu of system startup options. Next, you need to select the Last Known Good Configuration option.

Another method can be used. Go to the properties of the My Computer folder. Find the line System Protection, clicking on which will open the dialog box of the same name. Click Recovery – Next. We set a target date, indicate the disks that need to be fixed, and confirm the actions. After rebooting, the PC should work normally.

No restore points

You can fix problems with the OS without restore points. To do this you will need to resort to the LiveCD program. You need to download it and burn it to a flash drive with the .iso extension.
Further all actions will take place in the BIOS. You need to configure booting from a flash drive. To do this, in the Boot section, select USB-HDD in the First boot device line.

Before proceeding directly with the recovery, copy all the necessary files to a removable disk. The LiveCD program provides a special menu for these purposes.

We will fix the system error using an archived copy. Connect the USB flash drive, open the Windows\System32\config\ folder. Files with the names default, sam, security, software, system must be moved to any other folder. In their place, transfer similar files from the RegBack folder and restart the computer.

The described method will only help if the problem is related to the registry.

Command line

You can resort to “reanimating” Windows 7 from the command line if the PC begins to freeze or works slowly, however, the system still boots. Enter the menu "Start" and using the right mouse button, launch the command prompt as administrator. Run the rstrui.exe command, which will open the system restore program. Click "Next". In the next window, select the desired rollback point and click again "Next". Once the process is complete, the PC should work normally.

There is another way to access the utility. Let's go to "Start". To open the command line, click "Run" and enter the CMD command. We click on the found CMD.exe file and wait for it to launch. Next, enter rstrui.exe in the command line and confirm the action with the Enter key on the keyboard.

It is not always possible to play it safe and create OS restore points in advance. Problems may arise that block the option of such “reanimation” of the PC. Then you can use another, no less effective and easy option - restoring the Windows system using the system itself.

We rely on the diagram:

1. Icon "My computer"- right mouse button "Properties";
2. "System protection";
3. In the new window click "System protection", recovery button;
4. "Next";
5. Select a restore point according to the date;
6. Specify the system disks to be restored;
7. We confirm the operations and reboot the system.

Restoring Windows 7 using Safe Mode

This method is preferred if the usual system boot is impossible. Then after pressing the PC power button on the system unit, hold down the F8 key to call "Start Menu". One of the "Menu" options is "Safe Mode". Select it and press Enter on the keyboard. As soon as Windows boots, we carry out the algorithm of actions that we described earlier.

System recovery Windows 8/8.1

If you managed to start the OS, you can resume Windows 8 via "Options". Hover over the top right corner and enter them. Click on "Change computer settings" – . Chapter "Recovery" will offer several options:

1. “Regular recovery with information preservation”.
2. “Deleting data and reinstalling the OS”.
3. "Special option".

Decide what exactly needs to be done. Next, follow the menu prompts.

If you choose the latter method, in the window that opens, click on the diagnostics item. You will be offered the following options:

• "Restore";
• "Return to original state";
• "Advanced options". This item includes the ability to roll back to the desired resume point.

To resume Windows 8.1, press Win+R and call sysdm.cpl. In the system properties window in the tab "Protection" specify the required system drive. Click "Restore". Clicking "Next", you will be able to see a list of rollback points. Select the one you want and click "Search for affected programs". Changes that have been made to the PC since the selected moment will be deleted. Complete the process by clicking "Ready".

If you work with Windows 8, problems may occur, the Internet may not work correctly, etc. To fix this, you can use the classic recovery method through restore points.

Another option is a system rollback. To do this, open the menu "Start" - "Control Panel" - "Windows Update". Select an item "Removing updates". The same can be done using the command line.

So, in the list of updates that opens, we delete those from the moment of installation of which (we look by date) problems and malfunctions began. We delete unnecessary files and reboot.

You can perform a factory reset on Windows 8.1. Important files will not be affected during this operation. The method is effective, but to implement it, the OS needs to boot without problems. We use the algorithm:

1. Right side of the monitor - "Options";
2. "Changing settings";
3. "Update and Recovery" - "Recovery";
4. "Recovery without deleting files".

If you cannot log into the system in the usual way, you must use the disk with the system. Load the installation disk, select "System Restore". Press the button "Diagnostics", And "Restore".

Windows 10 System Restore

If you have problems with Windows 10, press Windows + Pause. Go to "System protection" and press "Restore" – "Next". Select the desired indicator and click again "Next". When finished, click "Ready". The computer will automatically restart and the changes will take effect.

One of the advantages of the “ten” is the ability to return the settings to factory settings. This helps avoid having to install the system all over again. To reset your data go to "Computer Settings" – "Update and Security" – "Recovery" – "Return the computer to its original state". Click "Begin".

You can take care of the possibility of a rollback in case of failure in advance. You can create resume points yourself or configure their automatic creation at the desired frequency. To do this, in the settings, in the Update and security item, select Backup service. Specify where to save copies, click Add disk. After selecting the device, the function will be activated.

You can restore your Windows 10 system again by using restore points. In this case, the system will be rolled back to the moment when it loaded smoothly and worked without failures. This recovery method is described at the beginning of the article.

If the OS does not boot, a warning table with a key appears on the screen "Additional recovery options". Click it and select "Diagnostics" - "System Restore". We select a Windows restore point, wait for the system to roll back and reboot.

If such operations do not help and the computer continues to work incorrectly, you can roll back to the basic settings. Some programs and utilities, personal PC settings will be reset, and personal data will be deleted.

This technique is used extremely rarely if the other options described above do not help. The algorithm of actions is as follows:

1. "Start" - "Selecting parameters"- tab "Updates and Security";
2. Paragraph "Recovery"- button "Begin";
3. We choose to delete all files or keep some of them.

Recovering the system after this will take 40-90 minutes.

Resuming using the installation disc

One of the radical methods of fixing the error involves using an installation disk. After launching it in BIOS, click System Restore. In the Troubleshooting section, specify the desired action. Next, follow the system prompts to complete the process.

Related Posts

The debate continues about which is better than Windows 10 or Windows 7. This phenomenon is not accidental. Developers from Microsoft claim that there is nothing better than Windows 10, but experienced users say the opposite, they say the system is more reliable than Windows 7 now...

Computer freezing is a rather annoying problem. This can happen both at the stage of system startup and in the middle of its operation. Let's figure out why this can happen and what to do about it? Why does my computer freeze...

Sometimes, when installing programs or applications, a message appears on the computer screen stating that Windows 10 error 5 has occurred. This means that the user is denied access. This happens if there are several accounts in the system...

Quite often, computers use Windows 7 startup recovery after errors have occurred. This may or may not be good for your operating system. Today we will talk about how to manage system startup recovery.

What is a recovery tool

The Windows 7 Startup Repair tool repairs the OS. It can fix a number of problems that prevent Windows from working properly. At the same time, this process starts scanning the computer, thereby determining the presence of problems and errors, trying to eliminate them and ensure the correct and efficient operation of your “iron friend”. By default, every Windows operating system has the Automatic System Restore option enabled. You can turn it off if you wish. But without special knowledge of your own computer, there is no need to do such manipulations - let the machine be checked, restored and functioning normally. Although there are times when restoring the startup of Windows 7 takes a long time and gets boring. This is already a signal to think about checking the hardware. Of course, restoring the startup of Windows 7 does not provide a 100% guarantee of the correct operation of the system - there are errors that recovery tools cannot cope with. We will talk about them further.

What recovery tools can't handle

The Windows 7 Startup Repair tool may not fix some problems. As a rule, system files that have been damaged, deleted or not installed at all are subject to recovery. It is not capable of greater recovery. Thus, it cannot eliminate hardware failure, such as a hard drive or memory incompatibility. Additionally, Windows 7 startup repair cannot protect your computer from viruses.

Restoring will not help with system installation problems either. So, if the operating system was initially “crooked,” then recovery tools will be of no use. Personal files (photos/videos/documents) cannot be returned or “repaired”. In order to save your data, you need to do archiving.

If recovery doesn't help

To resolve problems that are not resolved by System Restore, you must identify the problem. In any case, you will see a summary of the error and some documentation on your screen. This way it will be possible to understand what is going on and take appropriate measures. As a rule, if recovery does not help, then you need to “fix the hardware” or reinstall Windows.

Recovering the bootloader manually

There are several ways: restoring the Windows 7 boot loader manually, using programs, automatically and using a system rollback. Now we will talk about how to restore the system “by hand”.

In order to answer the question: “Restoring the Windows 7 boot loader - what should I do for manual recovery?”, you need to be patient and, of course, Windows 7. Now let’s proceed directly to the recovery process.

1. Adjust your BIOS settings so that your disk drive is the first boot and read option.
2. Insert the Windows 7 installation disc into your computer and restart your device.
3. You will see the already familiar system reinstallation window. At the bottom left you will see System Restore. Click on this button.
4. After this, the “System Recovery Options” window will pop up in front of you. Select the one you want to restore, click “Next”.
5. Next, select “System Startup Repair” - “Command Prompt”.
6. Write in the window that opens: “bootrec.exe”.

Bootrec keys

With the manual recovery method, after completing the last step, you will see a window with the so-called keys. They explain how the Windows 7 system will be restored. Now we will look at which keys are responsible for what.

FixMbr - writes a Windows 7 compatible master boot record to the system partition. This option is used when master boot records are damaged or non-standard codes need to be removed from it. The existing partition table is not overwritten. Restoring Windows 7 startup can bother you for a long time because of these entries, but with FixMbr you will get rid of the problem once and for all.

FixBoot - a new boot sector compatible with your operating system is written to the system partition. Use this key when:

Replacing the boot sector with non-standard options;

Damage to the boot sector;

If you were running a previous version of Windows.

Once you select the required Windows 7 startup repair tool, write it and press Enter. Wait for the process to complete. Done - the Windows 7 bootloader is working again and restoring the system. In this case, the boot will occur and the system will be restored to startup and will be in good condition.

Recovery programs

In order to “return” the system startup, you can use various Windows programs; restoring the startup of Windows 7 will be carried out almost automatically. This method is perfect when you don’t have the original Windows disk at hand. What programs can be used to carry out restoration?

Heren's Boot CD

As a rule, the salvation in the absence of the original Windows 7 disk is the so-called live CD, which can be written anywhere: either to a disk or to a flash drive. There are many such programs. The easiest and most convenient way is to use Hiren’s Boot CD. There are a lot of different Windows recovery utilities on this disk, but today we will talk about the most convenient and common ones. Before you start, you need to burn a liveCD and then boot it through the BIOS. Once this is accomplished, you can move on to the next steps.

Option 1 - Paragon HD Manager

One of the most popular system recovery utilities is Paragon Hard Disk Manager. In order to restore the Windows 7 system through it, you must:

Option 2 - MBRFix

Another convenient, fast and popular system recovery utility is MBRFix. It is not much different from the previous one. Unless it's your desire. You won’t have to wait long for Windows 7 system recovery to begin. All you need to do is follow these steps:

1. When starting the live CD, select “mini Windows XP”.
2. In the menu that opens, find and select “Partition/Boot/MBR” - “Commandline” - “MBRFix”.
3. To restore the bootloader, enter the following entry: MBRFix.exe /drive 0 fixmbr /win7 /yes.
4. Wait for the process to complete and restart your computer.

Restore using the command line. This is another good and high-quality way to restore the system. In order to use the command line as a Windows 7 recovery tool, you need to:

1. Launch on your computer. Don't forget to select the command line option.
2. Sign in.
3. Enter rstrui.exe in the command line.
4. Press Enter and wait for the processes to complete.

Disable recovery

You can use Windows 7 to disable system startup recovery. In order to disable annoying Windows 7 recovery when you start your computer, you need to:

1. Go to “Start” - “Control Panel” - “System” - “System Protection”.
2. Find the Properties window and open the System Protection tab.
3. In “Protection Settings”, find and highlight the drive on which you want to disable system recovery, click “Configure”.
4. In “System protection for...” in “Options”, check the “Turn off system protection” checkbox.
5. Click OK. In such simple and quick ways, you can carry out various manipulations with system recovery. Do not forget that Windows 7 can be restored using a system rollback. In this case, your personal data will not be damaged. It is possible to roll back the system only if the system itself can start, that is, if the recovery of the Windows 7 boot loader is always enabled, which constantly checks for errors, but the operating system is working normally. It will be necessary to “roll back” the OS to the date when there were no problems. Windows is restored using the standard kit included in the package. But if your computer was subject to some really unpleasant errors, then some problems may arise in the process that will not particularly affect the quality of the system - you will simply feel unusual and uncomfortable working at the computer. The most common problem is the disappearance of the language bar in the system.

Language bar and recovery

The language bar is something that is visible and familiar to everyone. As a rule, there is a panel that shows the keyboard layout and allows you to switch it. Sometimes it happens that she disappears. Then it becomes necessary to restore the launch and operation of the language bar in Windows 7. The easiest way is to turn to the built-in recovery tools. It is quite difficult to judge why exactly your language bar is “covered” and for what reasons, since there can be a huge number of them. Nevertheless, everything is easily and simply corrected. Let's start troubleshooting the problem with this panel. There are two methods here.

Method 1 - "folk"

1. Press Win+r and run intl.cpl. You can also use: “Start” - “Control Panel” - “Regional and Language Options”.
2. Go to "Languages ​​and Keyboards".
3. Open the Change Keyboard menu.
4. Next, you need to select the language bar in the “Languages ​​and text input services” window.
5. Check "Pinned to taskbar" and "Show test marks in language bar".
6. Next you need to accept the changes and click on OK.

The language bar should now appear.

Method 2 - "advanced"

1. Press Win+R and type regedit.
2. Find the tab in the registry:

HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run

3. Check CTFMon for the appropriate "program". If it doesn't exist, create it.

4. Right-click Run and “create string parameter”.

5. Assign a name to CTFMon and, right-clicking on it, click on “change”.

6. Write: "C:\Windows\system32\ctfmon.exe".

7. Click OK.

It will fall into its place allotted to Windows 7. Which method of returning the socket to its place is right for you - decide for yourself. It all depends on your skills and desires. But don't forget that a computer can be "repaired" to the point where it eventually stops working altogether. Be careful with system files. It’s good if you have several computers - on one of them you can always see how to fix this or that error that has arisen in the system.

In extreme cases, the only solution is to completely reinstall the system without saving the data.

This is done using Windows installation disks. Before you completely wipe the system, make sure that all recovery methods do not work. If there is no more output, insert the disk into the drive, configure the BIOS to boot from the disk and get to work. Very often, if there are boot loader problems, problems may arise with installing a new version of Windows or with waiting times. Try to carefully read everything the installer writes. Be patient - any computer requires proper, often very painstaking, care.

With these simple methods you can put your system in order. Launching Windows 7 and the language bar is not that difficult. If you doubt whether you can do everything correctly yourself, call a specialist. He will definitely be able to tell you the right and high-quality way to correct any errors that have arisen. Try to carry out all the necessary manipulations to protect and check your computer on time and regularly. Happy renovation!

If Windows stops loading, you can use standard utilities to restore correct operation.

One of the main nightmares of computer lovers is to encounter a situation where they cannot turn on the device. The operating system starts to load, but eventually displays a message like: “Windows updates could not be configured, changes are being discarded, do not turn off the computer.” After which nothing new happens - the software cannot be restored, and downloading stubbornly does not help.
Free online course "Windows 10 Simple Steps" Learn the basics of working with the Windows 10 operating system in our free online course. Short visual lessons will make everyday use of your PC much easier.

System recovery tools

Before the release of Windows 7, this situation turned into numerous dances with a tambourine, and often a complete reinstallation of the operating system. Now everything is different, and often the problem is solved with standard tools from Microsoft, which do not even need to be specially installed. The task comes down to being aware, in principle, that such a toolkit exists, as well as simply remembering it when suddenly the “irreparable” happens.

The trick is that when you boot your computer, even before the Windows boot icons appear, you have time to get into the advanced parameters of this very boot, where you will be able to run diagnostics and, if necessary, restore the system to the selected checkpoint. Windows 7 required you to press a function key when booting F8, and then select the “Troubleshoot” option (although in rare cases the “Last Known Known Configuration” option saved the day).

More Windows 7 download options

Once in the “System Recovery Options” menu, in most cases, one of the first two options became salvation. “Startup Repair” could save the operating system automatically, and “System Restore” required you to manually select a checkpoint to which the rollback would be made.

Windows 7 System Recovery Options

In order to be able to restore it to its original state in the event of a malfunction of the operating system, it is necessary to make a recovery disk in advance.
Microsoft would be betraying itself if, with the update of its brainchild, it left all the useful tools as before. Windows 10 system recovery is carried out by pressing hot keys Shift+F8, and, unlike “seven,” you need to press this combination very, very quickly, since the operating system itself began to load much faster.

The appearance of the rescue menu has also undergone changes. Having selected “Diagnostics”, in “Advanced options” there are already familiar to us “System Restore” and “Startup Repair” (only in a different order). There is also a “Return to previous build” option if you upgraded to “ten” from one of the previous versions of Windows.

If automatic recovery doesn't work

Restoring a Windows system to one of the previous checkpoints is not a difficult task. It is only important that these points themselves exist in the system, because sometimes users themselves manually disable their creation, at the same time deleting existing ones. It really makes sense to periodically clear old control points, since they take up a lot of space. But giving up recovery points altogether is a risky endeavor.
How to navigate the Internet without picking up viruses? Secure DNS servers will help.
To make sure that restore points are automatically created for you or to make changes to the corresponding settings, you need to select the “Large icons” (or Small, but not Categories) icon display in the “Options” window and select the “Recovery” item. There, select “System recovery settings”, check whether protection is enabled and, if necessary, use the “Configure” button. Here you can manually create a point for subsequent recovery.

If we have restore points, then using the method described earlier, that is, using the built-in Windows system recovery tools, you can quickly roll back to an earlier state of the computer without losing important files.

In extreme cases, you will have to restore the system to its original state or to a previously created system image. It is advisable to create a “System Image” and a “System Repair Disk” in a working state of the operating system, after you have installed all the applications you need. This is all done through the same “Control Panel” (aka “Settings”), when viewing by “Categories”, selecting “Backup and Restore (Windows 7)”. Here you can restore the operating system to a previously created image if the computer still boots, but has no longer worked as it should.
With each release of the operating system, Microsoft requests more and more information from users. But you can moderate her appetites.

Restoring a laptop to factory settings

If standard tools do not help, and you do not have a disk or USB device with a recovery image, then laptop owners can use “hot keys” to launch the built-in recovery utility. Some models may even have a separate key for these purposes, for example, OneKey Recovery from Lenovo, but this is rather an exception. In other cases, it is important to know which hotkey is for your laptop, since it tends to differ among manufacturers.

Hotkeys for laptop manufacturers:

• F3– MSI;
• F4– Samsung;
• F8– Fujitsu Siemens;
• F8- Toshiba;
• F9- ASUS;
• F10- Sony VAIO;
• F10- Packard Bell;
• F11- HP Pavilion;
• F11- LG;
• F11- Lenovo ThinkPad;
• Alt+F10- Acer (before this, select Disk-to-Disk (D2D) in the BIOS);
• Ctrl+F11- Dell Inspiron;
• Hold [ Alt] - Rover.

Factory Utility will restore the device to its original condition, as if it had just come from the store. This will delete all programs with settings, all files, including favorite photos, which it makes sense to store in cloud services just for such cases. However, the device will be able to work again, and in some cases this method will simply help prepare the laptop for subsequent resale or transfer to relatives.

Operating system failures occur for various reasons: incorrect installation of drivers and applications, computer viruses, hardware problems. Let's figure out how to start restoring the Windows 7 operating system in different ways. These methods are divided into two categories: with and without using the Windows 7 recovery environment.

Windows 7 Recovery Environment

Windows Recovery Environment, which means “Windows Recovery Environment”, provides the recovery tools we need. Further in the text we will use the abbreviation Windows Recovery Environment - WinRE.

Let's try to access WinRE tools:

The absence of an option in the Advanced Boot Options menu is a sign that there is no WinRE Windows 7 environment on your system drive. The reason is the removal of the protected hard drive partition that is created for WinRE when installing Windows.

In this case, select one of the download options:

• from the Windows 7 distribution;
• from a recovery disk created on another work computer.

Once you have access to WinRE, you can try to restore Windows 7 using environment tools.

Method #1: Last Known Good Configuration

The simplest method is based on the fact that the system stores information about the last successful boot of the computer.

If you cannot return Windows to a working state using method No. 1, move on to method No. 2.

Method number 2. WinRE: startup recovery

In this mode, faults that interfere with normal loading of the OS are analyzed. To start the mode you need to go to select the option. The following window will appear, in which we click the first item:

Startup Repair in System Recovery Options automatically fixes problems that prevent Windows from starting

If problems are found in the boot parameters, you need to confirm the need to make corrections by pressing the button Fix and restart.

Method No. 3. WinRE: System Restore

This method allows you to “roll back” the system to the time when it worked normally by selecting one of the restore points. But first these “points” must be created.

A recovery point is a kind of “snapshot” of the working environment at a certain point in time. Only Windows system and software settings are included in the records of this point. User files (documents, images, music files) are not saved in recordings.

Such points are created automatically by the operating system every 7 days. The user can create this point independently. It is recommended to do this before starting work that you are not sure will be completed successfully: installing unknown software, drivers. If the job fails, a restore point will allow you to return Windows to its original state.

Does Windows create restore points?

In order for Windows to automatically create points, the System Protection function must be enabled for the system disk.

Create a restore point yourself

Now, in the event of an unsuccessful installation of Photoshop, we can “roll back” the system to this point.

Performing a rollback

Method number 4. WinRE: image recovery

This is a data recovery mode from a backup copy. Let's try to create it.

Some users in their lives are faced with the need to restore the Windows system. In this article we will look at what system recovery is, how to do it and all the additional points on this issue.

What is this for? System Restore can help if your computer stops working properly. This condition is caused by the installation of virus software that makes changes to the PC registry or by inept/harmful actions of the user himself.

When might a system restore be necessary?

• The computer is hopelessly glitchy, slows down, and won’t boot.
• After installing a program, windows began to pop up reporting errors at the RAM level.
• The computer boots up to the Windows welcome window, after which the computer reboots.

Windows System Restore- This is the restoration of the state of the OS, files and programs on the computer to the moment when the malfunctions began. Sometimes the user misunderstands the meaning of system restore and means by it returning to a previous version of Windows. For example, from windows 8 to windows 7. In fact, when restoring the system, its version does not change.

There are many ways to “breathe life” into your operating system, but we will look at 2 of the simplest Windows system rollbacks:

• Restoring the system using BIOS,
• Restore using the command line.

It is worth noting initially that Windows 7 system recovery can only be performed if the recovery function (service) was launched earlier, before problems occurred. If it was not enabled, then you can only rollback using the Windows boot disk.
To activate the Windows Recovery service, you need to go to the “Control Panel”, this can be done from the “Start” menu. Next, look for an icon called “System Restore”. Next, click on the tab called “Start recovery”, the system will give us a message - the recovery service is disabled and will offer to activate it.

Typically, the first time you start Windows, a restore point is saved, even if the restore feature has been disabled. To view a list of your recovery points, you need to click the “View other recovery points” button.

If this function has already been launched previously, then we can immediately begin launching the system recovery procedure. Click “start system restore”, select a restore point, click “next” and “finish”. The recovery process has started, as soon as it is finished, the computer will restart, after which you can start working.
What to do if system restore doesn't work?

The most common problem is that the recovery service is not enabled. How to activate it is written above.

Of course, the possibility of its complete inoperability cannot be ruled out. Very often this can be found if a non-licensed version of Windows is installed.

Is it possible to restore a system without a restore point?

Most likely, you have already gone to the system recovery center, activated the recovery service and discovered that there is no backup point - which means you cannot choose which state to roll back the system to. Don't worry, your system can still be restored!

System recovery without a restore point can be done using the command line. It is recommended to strictly follow the instructions so as not to break anything. We will look at how to perform a system rollback using the command line below.

By the way, it is not necessary to use a disk; you can restore the system from an image by first recoding it and recording it on a flash drive.

Windows OS recovery programs

If your operating system is not completely dead, i.e. it still loads and works somehow. Or, for example, the system recovery tools built into Windows do not help - try using special Windows recovery programs, such as:
1. - a program that will help you both restore the OS (registry, boot areas, access rights) and scan your PC for viruses and errors in files.
2. — this software is focused mainly on backup of files, logical drives (partitions), but Acronis can also restore Windows and even Mac OSes.

How to restore the system via BIOS?

The huge advantage of this method is the successful recovery of the system even in the most difficult cases, the main thing is that the computer or laptop turns on.
Make sure you have a Windows installation disk (bootable disk) handy and insert it into the drive. Now we need to enter the BIOS. When you start the computer, press the F12 key, go to the Boot -> BootDevicePriority menu - first select the DVD drive if you are using a disk, or a USB HDD if you are using a flash drive.

We reboot the PC again, the Windows installer should now start. Often, when booting a PC, a message in English pops up, which requires you to press any key to start booting from the disk. If you do not do this, the computer will continue to boot after 10 seconds in normal mode from your HDD, and not from a bootable flash drive/disk as we need.

So, we booted from the disk and now select “System Restore” in the installation menu and click “Next”. After this, you will have to select a restore point; it is best to use the first successful launch, but the programs you need may not have been installed there yet. Those. you will lose programs (and the data in them) that you installed after creating a restore point. Click “Next” again, the system will now be restored. When the process is complete, click “Yes, ready.” We reboot the system, first removing the disk/flash drive from the drive.

System Restore via Command Line

This method is recommended if there is no system restore point. Again, we need a boot disk with the Windows operating system. Exactly the one installed on the computer.
You can view the OS version by right-clicking on the “My Computer” icon and going to the “System” tab.
If you have a system restore point, then you just need to boot into command line mode (to do this, press the F8 key when loading the OS and select “Boot in safe mode with command line support”). Then enter the command “rstrui” and follow the instructions.

1. If the boot sector of your OS is damaged.
Enter “fixboot” in the command line, press “Enter”, then enter “fixmbr” and press “Enter”. That's it, your windows boot sector has been restored, you can restart your computer as usual.

2. If the boot.ini file is missing.
Enter “bootcfg /rebuild” in the command line and press “Enter”. We answer all possible questions of the system by entering “Y” and pressing the “Enter” button.

3. If your config in the system32 folder is damaged.
Insert the disk with your version of the operating system into the drive, enter “cd repair copy SYSTEM C:\windows\system32\config” in the command line, press “Enter”, you’re done!

4. If the “ntldr” or “ntdetect.com” files are missing and the system displays messages like: “NTLDR is missing when loading Windows.”
Enter in the command line “copy J:\i386\ntldr C:\”, press “Enter” (Where J is the letter of the important drive, and C is the letter of your system drive on which your OS is installed).

If you do not want to restart your computer, you can restore the system via the command line from Windows. We insert the disc into the DVD-ROM, and the computer must be booted. Now you need to launch the command line. To do this, in the “Start” menu, click “Run” or press the “Windows + R” hotkey combination.
Enter the following value there: “sfc /scannow”, click “Ok”. After this, all broken system distributions will be copied from the boot disk automatically. System recovery and rollback are quite quick and trouble-free.

What is the difference between system recovery on laptop brands: Asus, Acer, Lenovo, HP, Sony, Samsung, Toshiba, Bell, Dell, Vaio, etc.?

I would like to note that there are no serious differences here. There may be different versions of BIOS, but the intuitive interface and tab names are preserved. There shouldn't be any problems with this.
The second point is the BIOS entry key; they differ between these manufacturers. But this is not a problem either, you can see what you need to click in the picture that appears when loading.

• Acer - F2;
• Dell – F2 or F1;
• Toshiba – F1 or Esc;
• Sony – F1, F2 or F3.

Sometimes after a system rollback, when you first start a laptop or computer, a message appears with this error - this means that the recovery was not completed successfully and strongly recommends trying again with a different restore point.

Try restoring to a different, earlier restore date. If such an error still appears after this, then the problem is much deeper. This means that the problem is a virus in your system that has corrupted the system restore point information.

A program that checks the strength of system user passwords. This utility is used by network administrators to calculate users with...