How to disassemble the remote from the Sony Bravia TV. Who is such a sysadmin? Download video and cut MP3 - we just have it

Remote control is an important thing in the house. However, appreciate the ability to switch the channels and adjust the TV volume without getting up from the sofa, usually start when the battery or the remote is starting to work well. Replacing the battery - the problem is elementary, however, it is quite another thing when the remote is simply starting to work badly. Usually the reason is simple - the mechanism has been hammered, the buttons began to press badly and it becomes clear that the device should urgently disassemble and clean. How to do it right?

First of all, it is worth noting that for any technique in the house should be highly careed. Only in this case it will work efficiently and serves you for a long time. The console is a small, but still an element of technology. And the lion's share of the load falls on it, because you constantly take it in your hands and click on the buttons. In order for the remote to work longer without the need to clean it, it should be used only with clean hands. Very often the remote is clogged due to the fact that it takes dirty hands.

Eating in front of the TV is not only harmful to health, but also for the technique that comes on hand. Small food particles fall inside and lead devices into disrepair.

Try, if you eat in front of the TV, complete the food intake fully, wash your hands and only after that continue working with the remote control.

But what is still done if the remote from your newly purchased Sony TV has already started working badly? First, try simply change the battery, in most cases the remote is starting to respond more actively and stops creating problems. If it did not help, and you have every reason to believe that inside the remote device there can be a lot of garbage, then it clearly requires cleaning that at home should be carried out carefully and neatly.

Disassembling the device: how to clean the television

In order to clean the remote, it must first be disassembled. Depending on the TV manufacturer, the remote control can be closed in different ways. Some firms make simple latches that can be opened without a screwdriver, others use screws and no tool to wash the console inside will be impossible.

Basic TV manufacturers today is:

• Sony;
• Samsung;
• Phillips.

The Council lies in the fact that almost any remote can be opened with a knife by unscrewing the screws with its tip. However, it is necessary to navigate the situation. If you can unscrew the screws with a knife, you can disrupt the thread, and in the future, the screws will sit tightly. An ideal option, of course, will be a small cruciform screwdriver.

When you open the remote, be careful and careful. It is important not to shift the connections and details, otherwise you can get confused and not know how to return to your place. You don't need to wipe the chip and fee, most importantly - just get rid of dust. Alternatively, you can spend the remote control inside by placing the smallest power of the thrust.

Instruction: How to Disassemble the Sony TV Remote

Wipe the remote inside - always a good idea, but you first need to open it. Most remote controls today are easily opening with a screwdriver, however, there is a completely different category of remotes for TV, which are generally fastened without screws. These are the remotes from Sony's new TVs. However, it is not really easy to open them, for this you should take a knife or a screwdriver, the last will be even better, and gently pose the tip of the connection cover of the console cover. You will find that the device opens a bit.

Do not immediately try to open the console completely in one place, otherwise you just dispetuate all the mounts. Carefully, step by step, open the cover, moving along its perimeter and gradually opening.

This operation may not work from the first time, however, the main thing is initially to pose the lid and then just do not rush. Even if you heard that one of the attachments cracked - not trouble, the cover will be kept on the rest. But be careful, because completely torn fasteners mean that you will have to attach the cover again.

Proper cleaning of the TV with television at home

In most cases, for a full cleaning of the console, it will be enough to reveal the main box of the device and blow it well. Sometimes it will be necessary to wipe the individual elements with a cloth. However, it happens when the console is very much polluting and only full cleaning can save it. In this case, get ready to disassemble the device as it should be - divide the upper and lower cover, separate the rubber gasket from under the buttons and the board with chips. It is not worth cleaning a fee, it may damage it, but you can even wash the rubber gasket under the crane. In this case, it should be completely dried completely and only after drying to use again.

In the most extreme case, if the dirty was even a fee and you want to clean it, then arm with a cotton wand, moisten it with alcohol and wipe with neat, gentle movements, so as not to damage the chip.

If you do not want the remote control quickly and demanded detailed cleaning in a disassembled state, we advise regularly clean it outside, which is much simpler and easier. To do this, you can use ordinary wet napkins or cotton swab in alcohol. Alcohol, though liquid, however, evaporates instantly, so it will not cause the console of any harm, as well as chips inside.

There are other preventive measures that will extend the stable work of the console without cleaning, this is:

1. Purchase cover. A simple, but extremely effective solution, thanks to which you can save the console clean and order. Yes, each time using the remote will have to be removed from the case, but this will allow to protect the device from garbage and dust.
2. Polyethylene. If you do not want to spend money on a full cover, we offer you a simple, but also an effective solution - wrap the remote control. It can even be a food film, the ends of which can either hide behind, or gently take a tape. Inside the remote will not fall any dirt, while you can replace the film at any time.
3. Hygiene. Of course, the most elementary precautionary method is first of all your personal hygiene, you should not use the device with dirty hands or during meals.

It is worth it all on everything, to keep the temptation and your remote control of the TV will serve much longer and more reliable.

Specialist answer: how to clean the remote control from the TV (video)

Let's summarize the remote, a very important thing in the house, without which it is difficult to do. However, without proper protection and care, the remote remote control is quickly contaminated, both externally and inside. To avoid this, you should use a cover or from time to time to wipe the device both externally and inside. In order to open the remote, you should use a screwdriver or in the extreme case with a knife to be unscrewed screws and open the lid. Sometimes modern consoles are closed on the latch, in this case you need carefully on the edge to open the lid until it completely comes down.

Remote control is an important thing in the house. However, appreciate the ability to switch the channels and adjust the TV volume without getting up from the sofa, usually start when the battery or the remote is starting to work well. Replacing the battery - the problem is elementary, however, it is quite another thing when the remote is simply starting to work badly. Usually the reason is simple - the mechanism has been hammered, the buttons began to press badly and it becomes clear that the device should urgently disassemble and clean. How to do it right?

First of all, it is worth noting that for any technique in the house should be highly careed. Only in this case it will work efficiently and serves you for a long time. The console is a small, but still an element of technology. And the lion's share of the load falls on it, because you constantly take it in your hands and click on the buttons. In order for the remote to work longer without the need to clean it, it should be used only with clean hands. Very often the remote is clogged due to the fact that it takes dirty hands.

Eating in front of the TV is not only harmful to health, but also for the technique that comes on hand. Small food particles fall inside and lead devices into disrepair.

Try, if you eat in front of the TV, complete the food intake fully, wash your hands and only after that continue working with the remote control.

But what is still done if the remote from your newly purchased Sony TV has already started working badly? First, try simply change the battery, in most cases the remote is starting to respond more actively and stops creating problems. If it did not help, and you have every reason to believe that inside the remote device there can be a lot of garbage, then it clearly requires cleaning that at home should be carried out carefully and neatly.

Disassembling the device: how to clean the television

In order to clean the remote, it must first be disassembled. Depending on the TV manufacturer, the remote control can be closed in different ways. Some firms make simple latches that can be opened without a screwdriver, others use screws and no tool to wash the console inside will be impossible.

Basic TV manufacturers today is:

• Sony;
• Samsung;
• Phillips.

The Council lies in the fact that almost any remote can be opened with a knife by unscrewing the screws with its tip. However, it is necessary to navigate the situation. If you can unscrew the screws with a knife, you can disrupt the thread, and in the future, the screws will sit tightly. An ideal option, of course, will be a small cruciform screwdriver.

When you open the remote, be careful and careful. It is important not to shift the connections and details, otherwise you can get confused and not know how to return to your place. You don't need to wipe the chip and fee, most importantly - just get rid of dust. Alternatively, you can spend the remote control inside by placing the smallest power of the thrust.

Instruction: How to Disassemble the Sony TV Remote

Wipe the remote inside - always a good idea, but you first need to open it. Most remote controls today are easily opening with a screwdriver, however, there is a completely different category of remotes for TV, which are generally fastened without screws. These are the remotes from Sony's new TVs. However, it is not really easy to open them, for this you should take a knife or a screwdriver, the last will be even better, and gently pose the tip of the connection cover of the console cover. You will find that the device opens a bit.

Do not immediately try to open the console completely in one place, otherwise you just dispetuate all the mounts. Carefully, step by step, open the cover, moving along its perimeter and gradually opening.

This operation may not work from the first time, however, the main thing is initially to pose the lid and then just do not rush. Even if you heard that one of the attachments cracked - not trouble, the cover will be kept on the rest. But be careful, because completely torn fasteners mean that you will have to attach the cover again.

Proper cleaning of the TV with television at home

In most cases, for a full cleaning of the console, it will be enough to reveal the main box of the device and blow it well. Sometimes it will be necessary to wipe the individual elements with a cloth. However, it happens when the console is very much polluting and only full cleaning can save it. In this case, get ready to disassemble the device as it should be - divide the upper and lower cover, separate the rubber gasket from under the buttons and the board with chips. It is not worth cleaning a fee, it may damage it, but you can even wash the rubber gasket under the crane. In this case, it should be completely dried completely and only after drying to use again.

In the most extreme case, if the dirty was even a fee and you want to clean it, then arm with a cotton wand, moisten it with alcohol and wipe with neat, gentle movements, so as not to damage the chip.

If you do not want the remote control quickly and demanded detailed cleaning in a disassembled state, we advise regularly clean it outside, which is much simpler and easier. To do this, you can use ordinary wet napkins or cotton swab in alcohol. Alcohol, though liquid, however, evaporates instantly, so it will not cause the console of any harm, as well as chips inside.

There are other preventive measures that will extend the stable work of the console without cleaning, this is:

1. Purchase cover. A simple, but extremely effective solution, thanks to which you can save the console clean and order. Yes, each time using the remote will have to be removed from the case, but this will allow to protect the device from garbage and dust.
2. Polyethylene. If you do not want to spend money on a full cover, we offer you a simple, but also an effective solution - wrap the remote control. It can even be a food film, the ends of which can either hide behind, or gently take a tape. Inside the remote will not fall any dirt, while you can replace the film at any time.
3. Hygiene. Of course, the most elementary precautionary method is first of all your personal hygiene, you should not use the device with dirty hands or during meals.

It is worth it all on everything, to keep the temptation and your remote control of the TV will serve much longer and more reliable.

Specialist answer: how to clean the remote control from the TV (video)

Let's summarize the remote, a very important thing in the house, without which it is difficult to do. However, without proper protection and care, the remote remote control is quickly contaminated, both externally and inside. To avoid this, you should use a cover or from time to time to wipe the device both externally and inside. In order to open the remote, you should use a screwdriver or in the extreme case with a knife to be unscrewed screws and open the lid. Sometimes modern consoles are closed on the latch, in this case you need carefully on the edge to open the lid until it completely comes down.

From, pull out batteries from it. Sometimes in the compartment for the fixing screws that hold together the upper and lower parts of the case together. If there are such screws in your console model, armed with a suitable screwdriver, unscrew them. If there are no screws, it means that the body of the console holds on the latches located on the top or bottom of it.

Insert the screwdriver into the location of the body parts. Pretty her upper or lower part and, putting the effort, disassemble the remote. You will see that it consists of three main parts: hull;
Console chip;
Rubber gasket with control buttons

Look at the chip. One of the main reasons for the fault of the television remote control is that the conductive spraying on the buttons or chips is erased from frequent use. If under the dirt layer, the spraying is left not erased, the console can be returned.

Wipe the microcircuit with the cleaning solution. Remove the contamination on the body of the console from the TV and on the laying with the buttons. If the pollution is too strong, which happens from the long-term use of the console in the cellophane package, thoroughly rinse with water all of its parts, except, of course, chip. The main thing, in front of the assembly of the remote, give them well to dry, so that the assembled device cannot provoke accelerated oxidation processes.

Sources:

• TVs Sony IPTV.

Each house has household appliances that is usually supplied with a remote control. This remote is very convenient, as it can be controlled by using it at a distance. However, the consoles are very often broken and require repair. How to disassemble the console to repair it?

You will need

• Plastic screwdriver or tight rubber, blank paper.

Instruction

Prepare a clean surface. It is best to lay a white sheet of paper, as small details will be visible on it, which are very easy to lose. Carefully examine your. The principle of assembly in all the consoles is about the same, in the location of fastening bolts and latches. Read the home appliance manual, the remote control from which you need. Very often there is the structure of the console. It will help you correctly disassemble the console without disturbing any details.

Remove the compartment cover where there are. Inspect the latch of this compartment. It is very often breaking and begins to disconnect from the body itself. If the latch is broken, it needs to be replaced, as it is useless to glue a broken piece. Remove batteries. Make sure that the batteries are not oxidized. Inspect the contacts in the compartment. They must be clean, without spots and extraneous coating. If the batteries oxidized, you will have to clean all contacts, otherwise the remote control may not work. It is also recommended to buy batteries instead of batteries. They are good because they do not oxidize. Also with the help of batteries you can save.

Download video and cut MP3 - we just have it!

Our site is an excellent tool for entertainment and relaxation! You can always view and download online video, video jokes, video hidden cameras, feature films, documentaries, amateur and home video, music videos, video about football, sports, accidents and disasters, humor, music, cartoons, anime, serials And many other video are completely free and without registration. Convert this video to mp3 and other formats: MP3, AAC, M4A, OGG, WMA, MP4, 3GP, AVI, FLV, MPG and WMV. Online radio is a radio station to choose from country, styles and quality. Online jokes are popular jokes to choose from styles. Cut MP3 to ringtones online. Video Converter in MP3 and other formats. Online television is popular TV channels to choose from. The broadcasting of the TV channels is made absolutely free in real time - the ether online.

Sysadmin (he is in English sysadmin., system Administrator) - Abbreviated name of the profession, the full name of which in Russian sounds like system Administrator. This profession has recently become very popular for most young, and not so, people, she is trained, they work on it, they receive good money for it. This is due to the rapid development of various computer technologies and their penetration into all spheres of human life. The word sysadmin is often used in spoken speech, in vacancies and resumes when looking for work, in one word - everywhere. Below will be discussed that the profession of the system administrator is.

In modern realities, a system administrator can be called actually any person who is engaged in servicing and maintaining a specific computer network, including all its hardware and / or software components, which may include:

• Personal computers such as workstations and servers;
• Network equipment, such as switches, routers, firewalls and much more;
• Web Servers, Mail Servers, Database Servers, and Other.

Also in certain cases, on the shoulders of the system administrator can lie the obligations to ensure proper information security.

Depending on its specialization, the system administrator can engage in the following activities:

• The workstation and server administrators are most often maintained as hardware (farewell motherboards, chanting power supplies) and software (Windows not loaded, commas are not printed in Word "E ...).
• Corporate network administrator based on Active Directory domain. Very popular occupation, given the prevalence of Windows operating systems, as well as the need for them to somehow control them. Such a specialist should be able to create, distribute by groups, edit users, give them the appropriate rights in the Domain AD, as well as be able to manage group policies for users, their computers and groups in which they are all consist.
• Administration of networks and network equipment. Its obligations include knowledge topology of networks, the ability to work with both not customizable and with customizable network equipment, planning a local computer network, as well as the possibility of combining into one network of several jobs from each other by setting NAT "OV and VPN "s. It is not necessary to forget the access and control of access within this network, and beyond the proxy setting.
• The web server administrator, which should at least be able to install, customize and serve one of the following web servers - Apache, IIS, Nginx, follow the hosting (which can be located both within the organization's network and outside it). In addition, a good administrator should be able to customize the normal distribution of resources at high loads, clustering and many other specific things.
• The postal server administration is also a common task for the sysadmin, its task includes working with such popular solutions as Exim, Microsoft Exchange, Postfix, Sendmail, or corporate mail solutions from Google or, for example, Yandex. In addition to obvious control of accounts (creation, deletion, configuration), it is also necessary to be able to configure the antispam system and so on.
• Site administrator. These duties can include as simply some filling of the contents of the site, but since it is about the system administrator, then in theory it should be able to be able to configure hosting (including a web server, which has already been mentioned above), install and configure The desired site, such as any content management system (CMS).
• The task of creating or maintaining a video surveillance system may become quite rarely for the obligations of the system administrator. In tasks, installing and configuring cameras, responding to various events, saving and playing records. Refers to system administration weakly, and often falls into its duties on part-time to any other duties.

Overboard the system administrator class described above, such possible things as administrative databases (Microsoft SQL, MySQL and its multiple branches, Oracle, etc.), 1C administration (not to be confused with "Programmer 1C"), PBX and much more .