How to enable vpn configuration on iphone. How to set up a VPN on iOS (iPhone, iPad), download the app for free

At this point in time, when in most regions of the Russian Federation some online service beloved by many may suddenly be turned off, VPN is beginning to gain popularity. However, not every user may know what a VPN is or how to encrypt their own connection when using Apple mobile devices.

VPN (English: Virtual Private Network) is a generalized name for technologies that allow one or more network connections (logical network) to be provided over another network (for example, the Internet).

In some cases it is really necessary to resort to such actions.

First, it’s worth understanding what a VPN is on an iPhone. VPN is a technology that can protect your Internet connection.

How does a VPN work?

The entire workflow follows a very simple scheme: your mobile device is the source of a request to connect to the system to the VPN server, after which the user ends up on the Internet, while the traffic itself will go through the VPN. In simple terms, a VPN is considered a kind of intermediary between the user and the global network. This function also provides an IP address to mask the real location in which the user is located.

VPN Installation Methods

There are several ways to install a VPN on a mobile device, but in this material we will turn to the simplest and most common method, that is, installing a special application that is responsible for the VPN service.

Many advanced users of Apple devices are probably familiar with an excellent program called. Installation and downloading of the application occurs without paying a fee. When you enter the application itself, you will need to go through the registration procedure, after which you will have up to five hundred megabytes at your disposal, which are provided to users monthly to use network capabilities. If you publish the service on Twitter, you can get 1 GB as a bonus.

There is another similar program designed to work with VPN, called Cloak. After downloading the application, you need to install the profile and then add the VPN configuration.

If you have VPN disabled in the settings menu (the slider is to the left), then you will need to activate it by moving the circle to the right.

It is worth noting that when using any application, VPN configurations can be added in almost unlimited quantities.

Part 1: Delete VPN on Your iPhone

Let’s begin at the way that most widely used among iPhone users.

• Step 1.Settings>General>VPN
• Step 2. (For iOS 10, iOS 9, iOS 8 or iOS 7) tap little icon beside the VPN
  (For iOS 6 or previous versions) you click the blue arrow.
• Step 3. When you see the configuration window for VPN, click PPTP then you will the settings. Check the Delete VPN which you can find at the bottom. After you click it and you can delete VPN from your iPhone.

Note: If you had uninstalled Avast on your phone, you might have met the problem like the once turned off VPN restarts itself to run the batter down. Don’t worry, you can fix this by tapping Settings > General > Profile so that you can find the profile for Avast and delete it.

Part 2: How to Clear Up All Password on Your iPhone Completely

How to delete passcode from iPhone

• Step 1. Settings>General>Touch ID & Passcode
• Step 2. Enter the passcode for your iPhone

These two steps will work if you do remember the passcode. For those people, unfortunately, forget their passcode, read below to learn how to unlock iPhone if you had forgotten the passcode.

Steps to delete Saved Safari Passwords on your iPhone

• Step 1. Check the drop-down list after tapping Settings, and then you can tap Safari to choose Auto Fill
• Step 2. You should tap clear all at this step. And when the window pops up to let you confirm your action, just tap Clear AutoFill Data to finish it.

How to delete iPhone iCloud Account with no password

Some people will remind you that if you bought a used iPhone, you might find out that this phone already associated with the iCloud account of its former user. This will cause a lot of trouble to its current use. So what do we do to delete the iCloud Account on iPhone when you don’t know the password?

Well, you can try the common way to do it. Tap Settings > General > Reset > Erase All Content and Settings.

Anyway, you don’t need to worry about this software doesn’t support your device. After you successfully launch it on the computer, connect your iPhone to the computer and wait for the software to display your device on its interface. The software shall take some time to detect all the data on your phone.

Step 2. Choose Eraser mode to clear up your iPhone

See the picture below; there are two modes to choose from. I suggest you choose the ERASE ALL DATA. This mode will make sure all the deleted data will forever disappear from your iPhone. Even you try to recover them by using some data recovery software. Not even possible if you use iMyfone D-Back for iOS Data Recovery .

When you have to choose the security levels, as the software recommended, you’d better choose the High level.

Step 3. Data delete from iPhone permanently

When you finished the two steps before, there are not much left to do in this step. All you need to do is no more than to click the Start button and confirm your action later. Then you will wait and check your iPhone after the software finishing its work.

By the way, here is everything about Streamlord the best internet storage service, for you if you need it.

Part 3: Delete Restrictions on Your iPhone

Question 1: I want to know how to turn off Restriction for Accessing to App Deletion. Thank you for answering my question.

Answer: iPhone set Restrictions to protect apps, so you should think carefully before you deleting Restrictions. But if you really want to remove Restriction from your iPhone, you can try tap Settings> General> Restrictions> Disable Restriction and then you will enter the password for the restriction.

Question 2: I want to know how to fix thing after losing restrictions passcode.

Answer: When you forget the restrictions passcode and you had something been restricted on your iPhone. What a wired situation. You should know how to fix this. Maybe you should start with these following steps. Know more about How to Reset Restrictions Passcode on iPhone when you forgot it.

• Step 1. First tap Settings > iCloud. And in order to sync data to iCloud, you need to turn on Mail, Contacts, Calendars, Reminders, Notes and other data.
• Step 2. Keep press the power button of your iPhone until you see the red slider. Then turn off your iPhone
• Step 3. Via USB cables you can connect your iPhone to the computer. At some time, be sure you had launch iTunes on the computer too. Now you need to hold the home button long enough to get the notion from the iTunes that it had detected a device in Recovery mode. Then you can click OK to restore your iPhone
• Step 4. You may not see any data stored on your iPhone after restoring it. Tap Settings > iCloud on your iPhone. Log into your Google account and then sync data you had synced before during the step 1 if you still remember.

After reading the article Warm and Lamp Internet, I became concerned about the problem of setting up a VPN server that can be used from iOS devices.

To use OpenVPN you need a Jailbreak. This option was not considered by me.

IOS supports L2TP, PPTP, Cisco IPSec.

Cisco IPSec works with appropriate hardware. PPTP is sometimes cut by cellular operators. Based on this, L2TP was chosen.

I already had a VQ7 server from Hetzner with Ubuntu 12.04 32 bit installed, so all experiments were carried out on this server.

Installing IPSec

IPSec setup:

In order for IPSec to work normally, additional settings are made:
sudo nano /root/ipsec
Content:
iptables --table nat --append POSTROUTING --jump MASQUERADE echo 1 > /proc/sys/net/ipv4/ip_forward for each in /proc/sys/net/ipv4/conf/* do echo 0 > $each/accept_redirects echo 0 > $each/send_redirects done /etc/init.d/ipsec restart
The first two lines are actually used for L2TP

Making the script executable:
sudo chmod +x /root/ipsec
Add it to rc.local

L2TP installation:

L2TP setup:

After this, restarting IPSec and L2TPD should activate the entire system:
sudo /etc/init.d/ipsec restart sudo /etc/init.d/xl2tpd restart

iPhone setup:

Description- Connection name
Server- IP address of your server
Account- This user from the /etc/ppp/chap-secrets file
Password - password from /etc/ppp/chap-secrets
Shared key - YourSharedSecret from /etc/ipsec.secrets

After that, in the Settings menu and in the Settings > General > VPN menu, you can enable VPN. If everything goes well, the corresponding icon will appear.

The VPN will need to be turned on manually each time you use it.

Setting up a connection in Windows 7

In the Network and Sharing Center, establishing a new network connection, creating a new connection:

Create a new VPN connection:

In the “Internet address” field, enter the IP of your server. Don't connect right away.

After that, go to the properties of the new connection and in the settings indicate the use of L2TP, enter the key YourSharedSecret from /etc/ipsec.secrets

When connecting, specify the login and password from /etc/ppp/chap-secrets.

Materials used to write this article

VPN (full name – Virtual Private Network) is a way of organizing virtual computer networks over real ones. Why is it needed? VPNs are used to solve a variety of problems. For example, to bypass blocking access to certain sites that are prohibited in a particular territory. This communication technology is also used to increase confidentiality. Using a VPN makes it easy to encrypt your connection. As a result, those requesting an IP will not receive your individual number, which records where you access the network from, but another one, tied to a location or a specific country.

So we invite you to figure out with us how to set up a VPN on iPhone. At the same time, we promise that the information below will be relevant for almost all models - 4, 4s, 5, 5s, 6, 7, etc.

Instructions for setting up a VPN for iOS

There are different ways to enable VPN on your iPhone. Although this is usually done through the device's built-in settings or using third-party applications.

Let's first take a closer look at the first option. That is, we will set up a VPN on the phone itself without installing special software from the Internet.

For reference! VPN is a kind of link between your mobile device and the Internet. Its main function is to give a false IP address in order to disguise the user’s real location. Although today many of us use VPNs to remove blocks to various prohibited sites.

How to connect a VPN on iPhone using an app?

There are many programs that provide VPN connection on iPhone. More precisely, each VPN provider has its own application. Therefore, you can simply go to the App Store, download and install it.

Although we recommend paying attention to the program Betternet . This is one of the most convenient such applications. To connect and disconnect a VPN, you only need to tap one button. However, the time you can use VPN is not limited. However, with the first launch you will have to configure the profile. Once you log into the application, you won’t have to do this anymore.

You will also not need to create accounts or use any additional services. Just go to Betternet, press “connect” to connect and “disconnect” to disconnect. This application also does not have any advertising, registration, etc. It even works in China (there are a lot of restrictions on various resources), where the same popular VPN Master turns out to be useless.

Ask how this free VPN service lives without any financial support? It's simple. If desired, each user can become a volunteer and help the project by promoting and installing applications from the App Store. Quite interesting and easy.

For reference! What other programs for working with VPN can you recommend? These are Tunnel Bear, OpenVPN connect and Cloak. If you have not only an iPhone, but also an Android smartphone, then it is better to use the Turbo VPN program on it.

How to remove VPN on iPhone?

To do this you need to go to “Settings”. Then select the “Basic” section. Then click on “Profiles”. Find your VPN, tap on it and then press the red “Delete” button.

Possible problems

If the iPhone is connected to the network via VPN, then this is indicated by the corresponding icon in the top notification bar (usually it does not blink, but is simply displayed). It also happens that he suddenly disappears unexpectedly. This means that the VPN connection is not working. As a rule, there are two reasons for the problem:

• unstable internet connection;
• failures on the server providing VPN services.

Therefore, if there are any problems:

1. To begin, manually reconnect to the VPN using one of the methods described above.
2. Then check if your connection to the mobile Internet or Wi-Fi network is stable.
3. Please ensure that the specified settings are correct.
4. If you used the application, then simply install another service. It's likely that the program you downloaded and downloaded earlier has a VPN connection blocked in that area.
5. You can also try rebooting the device and disabling antivirus software.

Let's sum it up

Today, many people believe that VPN is an area that only hackers and computer “gurus” would need. But this is a mistaken opinion. Any user, if his favorite Internet resource is blocked, will want to bypass the blocking and restore access to it. And this can be done using a VPN. At the same time, we described in detail how to “crank it all out” in this article.