iPhone SE button crunches: solving the problem of unpleasant sound. The Home button on the iPhone creaks - what to do?

The "Home" button on mobile devices makes life much easier for users. Almost every modern smartphone can have this component. The iPhone has it too. Small, very active used button at the bottom of the phone, it is located directly below the display.

What to do if the iPhone 5S's Home button doesn't work? Why might a person encounter this problem? How often does this problem occur to owners of Apple products? The answers to all these questions can be found below.

Typical breakdowns

Please note that the "Home" button on Apple phones is made of glass. It is fragile and easily damaged. Therefore, gadget owners may encounter mechanical causes of component failure. Fortunately, in practice this happens extremely rarely.

Why then doesn't the Home button work on the iPhone 5S? Most often you encounter system failures and problems. You can eliminate them either independently or by contacting service centers. It all depends on the specific owner. What advice and recommendations can be given to those who decide to correct the situation on their own?

About repair methods

It all depends on the specific situation. Of course, without finding out the cause of the failure, it will not be possible to repair the Home button. If we describe possible solutions in general, they boil down to some actions.

5S replacement is a rare occurrence. It has already been said that mechanical damage to smartphones occurs, but not so often. Typically, dealing with a broken button comes down to:

1. Key calibration. No additional programs are required; all operations are carried out directly in the gadget.
2. Correcting the position of the connector. Doesn't always work. Careless handling of the phone can lead to mechanical damage to the button.
3. Cleaning the device. Quite an effective way to deal with the problem. It helps if the "Home" button on the iPhone 5S crunches.
4. Replacement of a component at the hardware level. You can simply stop using the button on the iPhone and transfer its functions to the display.

In fact, all of the above methods are not difficult to implement. The main thing is to know exactly how to act. Each method will be discussed in more detail below.

Calibration

The simplest solution is to calibrate the button. This option helps in most cases. It is recommended to begin the fight against the phenomenon being studied with it. Especially if the Home button on the iPhone 5S is stuck. In fact, everything is simpler than it seems.

Instructions for calibrating the "Home" key are as follows:

1. Turn on your mobile device. It is important to wait until it is fully loaded.
2. Launch any standard application. It can be an organizer, calculator, calendar, and so on.
3. Press the "Power" button. Hold it until the menu to turn off the smartphone appears. As soon as the corresponding window appears, release Power.
4. Click on "Home". Hold the button in this state until the menu disappears.

That's it! This technique is called calibration! It, as already said, helps a lot, if not for everyone, but this method can really improve the situation for the better.

Connector position

But what if the “Home” button completely refused to perform its functions? These are the circumstances that many smartphone owners often face. Replacing the "Home" button on the iPhone 5S (or any other phone) is not necessary in this case. In any case, it is necessary to postpone this process.

To bring the Home button back to life, it is proposed to adjust the position of the connector. The proposed method can be called non-standard. But, as practice shows, it turns out to be effective.

The whole procedure boils down to the following steps:

1. You need to connect a USB cable to your iPhone.
2. Place your finger on the plug in the smartphone connector.
3. Using a gentle upward movement, press the cable near the connection connector. After this, you need to click on “Home”.

If after this procedure the button does not work, it is recommended to stop trying to adjust the connector. The applied force may damage the mobile phone. And in addition to a non-functional button, you can also get a damaged connector for connecting the gadget to the PC.

Cleaning and Lubrication

Is the Home button crunching on your iPhone 5S? It is likely that cleaning the component and lubricating it will help correct the situation. This process is not that difficult. Even a beginner can master it.

A non-functioning button can be lubricated using cleaning products. For example, alcohol or WD-40. The second substance is often used in everyday life. It is recommended to give preference to it in case of problems with smartphones. But you should be careful! WD-40 is highly fluid. Excessive substance applied to a smartphone can harm the iPhone.

Lubrication occurs as follows:

1. Apply some WD-40 (or any other cleaning agent) to the Home button.
2. Press the key several times in successive movements. You will have to repeat the procedure approximately 15 times. This is done until the lubricant penetrates into the gap between the smartphone panel and the Home button.

No further action is required. If alcohol was applied, you will have to wait for it to evaporate. Usually this takes no more than 2 minutes.

Duplicating a button

The last way to fix a button is to duplicate it. It has already been noted that the iPhone can do away with the Home key, transferring its functions to the display. What needs to be done for this?

The iPhone 5S's Home button doesn't work. In order to correct the situation, you can do the following:

1. Go to "Settings" - "General". This must be done with the smartphone turned on.
2. Open the Accessibility menu.
3. Select AssistiveTouch in the window that appears. Set the switch to "On" mode.

A translucent button will appear on the screen, clicking on which allows you to work with the “Home” button without directly using it.

Conclusions

There's really nothing difficult about fixing the Home key. Some users are interested in "Home" on iPhone 5S. It is not recommended to replace the component yourself. Therefore, it is very problematic to get acquainted with such information.

If all of the above methods do not help, then it is best to take the smartphone to a service center. They will be able to determine the exact cause of the button failure and replace it if necessary.

Hello. This “problem”, voiced in the title of the article, is very, very old. Some have a crunching sound, others have mechanical clicks when pressed, some think that this is a defect of the “Home” button (after all, it’s simply impossible to use it like that and needs to be changed urgently - where is my guarantee?!), some use it and worry (what if then will it break?), well, someone just “gives up” on this matter. It is not clear who to believe. There are many opinions and it is very difficult to get to the truth.

Therefore, today I will simply share with you my observations (I have touched a lot of all sorts of iPhones, and my friends and acquaintances mostly have Apple phones), read the forums (let’s see what people write there?), and then ask about the crunching and clicking the “Home” key from Apple technical support (what do they think - is this normal or defective?).

The tasks have been set - it's time to start. Let's go!

Of course, this is a joke. But after reading the article to the end, it will be clear why it is very appropriate here.

Important note! In the article we will deal with the sound that the button makes not due to any mechanical damage or, for example, the ingress of liquid. It’s clear that if you fill it with sweet water or “successfully” hit the phone, then you can get not only a crash from it, but also all sorts of other surprises.

We will talk about its operation in “standard” mode, without the influence of external factors.

Personal experience or does the author's Home button click?

I've had a lot of iPhones in my hands, but I started noticing the crunching noise with the 5S model. Similar sounds when pressing the Home key appeared immediately after purchase. And with one characteristic feature:

If you don't use your iPhone for a while, you press it and hear a crunching sound. But only for the first time. Then, if you continue to use it and periodically press the button, it runs like clockwork. As soon as I put it on for a couple of hours - again the first press and a crackling sound.

One might assume that dirt got into the button and thus it is rubbing in, but why did this happen from the moment of purchase? By the way, now I still have an iPhone 5S and no sounds are made when I press “Home”. At all. Apparently I've finally gotten used to it. And at first there was such a loud noise that I thought it would just fall off.

How are your friends and acquaintances doing? I talked to those I could. Some people have clicks, some don't. The models are different for everyone - here are iPhone 5, SE, 6S. Someone even talked about the iPad - there is a key sound. But the most interesting thing is that no one paid attention to this. It’s true that such social With a survey, I sowed doubts in the head of one person, he now began to think - is this a marriage or not? I had to calm him down. How? More on this below.

The first conclusion is that many people have clicks, but most do not think about it.

Are there many such iPhones (with a “defect” of the Home key)?

It’s clear that I can’t speak for absolutely everyone, but after reading a large number of messages and threads on various forums (including in the English-language segment), we can generally summarize the public’s opinion.

Many people have a mechanical clicking sound when you press and release the “Home” button. It’s just that not everyone writes about it and not everyone cares much about it. Well, or the same situation occurs as in my example - at first it was there, and then (apparently from numerous clicks) it disappeared.

Probably, it would be much worse if there were no sounds at first (upon purchase), and then suddenly appeared - this may indicate the ingress of dirt or liquid.

The second conclusion only confirms the first - we are far from alone with such a clicking button :). You should only worry too much if the crackling noise appears after some time and is accompanied by a problem such as a bad button press. This may indicate that perhaps you filled it with something or something worse...

Clicks the “Home” button - marriage or not? Apple technical support responds

And now here is the most important and important twist in this whole story, after which, to be honest, I really thought about it. Who can give an official answer to this question? Of course, technical support! And here a very big surprise awaited me. And all because I received two completely different answers.

At first I decided to contact them by phone - it was just faster to call. We talked and found out that clicking when you press the Home button is more than normal for the iPhone. This really happens and there is no need to be afraid of it. Everything is OK! I sat down to finish writing this note.

However... You can’t insert a telephone conversation into an article, but you can easily insert a picture! Therefore, I decided to clarify this question again, but in the chat. And here was the exact opposite answer:

What conclusion can be drawn from all this?

Let's try to summarize:

1. Such sounds do not indicate any problems with the iPhone - two technical support specialists agree on this.
2. In my opinion, it was the word “crunch” that confused the employee in the chat and that’s why he gave such a categorical answer - marriage.
3. It is very difficult to convey the degree of audibility of this sound through text. When communicating on the phone, it was much easier to explain what I mean by the clicks and extraneous crackling sounds of the Home button.
4. In any case, the final decision (whether the device needs to be repaired or replaced under warranty) will be made by service center specialists.

P.S. If you have had similar cases or have already contacted the service center with such a problem, write in the comments about the results. Very interesting.

Some owners of iPhone SE began to notice that when pressed, the Home button makes an uncharacteristic sound, reminiscent of a crunching sound. Even though the smartphone works fine, the key play and sound are starting to become quite annoying. What is the reason for such a squeak and how to fix the problem?

Why does the home button on the iPhone SE crunch?

There are not many reasons why a button clicks. Here is a list of possible factors leading to improper functioning of the part:

• dirt causing the keys to stick;
• manufacturer's defect;
• breakdown of the Home button due to mechanical damage;
• moisture ingress.

Cleaning the button

If the iPhone SE home button starts to crunch, we recommend cleaning it at home. You will not be able to insert a toothpick or a cotton swab into the microscopic gap along the contour of the rim. Therefore, it is best to use bookmark stickers.

You will need:

1. Place the end of the bookmark under the Home button. Try to do it along the contour so that it fits into the gap. To create a hole, you can slightly press the key on one side and insert the end of the sticker on the other.
2. Walk along the contour, removing dust and dirt from under the key.
3. If a sticker gets stuck somewhere, you can be sure that a lot of debris has accumulated there. Reduce the length and try to pull out the dirt step by step.
4. If necessary, repeat the procedure several times until all the dirt comes out through the rim.

Factory defect

Does the home button on your iPhone SE crackle as soon as you start using your new smartphone? Then you are out of luck, because the reason for this is most likely a manufacturing defect. For example, assemblers did not secure the display module tightly during production.

The only correct solution in this case would be to contact a service center or carry out repairs yourself.

DIY repair

If you notice a button squeaking after you recently disassembled your smartphone (for example, you changed the screen), then with a high probability you can say that a third-party element got into the button. You need to disassemble the smartphone again, and then use antistatic tweezers to correct the location of the key.

Remember, to independently disassemble the iPhone SE, it is advisable to acquire a set of tools:

• a Phillips screwdriver and a regular screwdriver for removing screws;
• antistatic tweezers;
• spudger;
• suction cup for opening the case.

The iPhone SE Home button crunches and periodically refuses to work

It happens that the home button not only makes an unpleasant grinding noise, but also does not respond to commands. Regular cleaning can only temporarily solve the problem. In such a situation, you can try placing the key on silicone.

To do this:

1. Apply silicone to a cotton swab or toothpick.
2. Fill the space under the button with the silicone mixture so that it completely covers the gap.
3. Wipe off any remaining material from the surface of the phone.
4. Check functionality.

Such measures were not successful and the Home button still does not function? Then the only solution is to replace it, especially since the cost of the part is not that high.

Repair and replacement of elements

In order for the home button to work like clockwork without third-party sounds, you will need to replace the connector for the charger and some of the lower cables, which goes as follows:

1. Analysis of the device.
2. Removing the battery.
3. Disconnecting cables from the main part of the smartphone.
4. A board cutout that caused the Home button to no longer function.

Replace the element yourself or contact a service center for help. In most cases, the service center refuses warranty repairs, citing the fact that the button has become unusable during operation. Therefore, in 90% of cases you will have to pay repairmen.

Many iPhone and iPad models have one extremely annoying problem. The Home button can start to squeak a lot, causing serious inconvenience for users who don't expect poor build quality from their expensive devices. Fortunately, it is not always necessary to disassemble an iPhone or iPad in order to get rid of the squeaking Home button. In this guide, we talked about several effective ways to solve the problem with the squeaking Home button.

Calibrate the Home Button

One of the simplest, yet truly miraculous ways to get rid of the problem is to calibrate the Home button. To do this:

Step 1. Launch any standard application on iPhone and iPad, for example, “ Watch" or .

Step 2: Press and hold the button Nutrition and hold it until the device's power off slider appears on the screen.

Step 3: Release the button Nutrition.

Step 4: Press and hold the button Home until changes occur on the screen (the system may throw you either to the main screen or return you to the previously launched application). You usually have to hold the Home button for about 5-10 seconds.

Ready! You have calibrated the Home button - now it will respond more adequately to presses, and at the same time the creaking may disappear. This decision may seem frivolous to many, but positive reviews of this method on ours indicate the opposite.

Lubricate the button with silicone

A more radical method of getting rid of the squeaking of the Home button is to lubricate it with silicone. Apply silicone to the button, getting it into the gaps between the display and the button. Then remove excess silicone with a rag. In most cases, after this operation the squeak will disappear.

Note that lubricating the button with water can also help. Wet your thumb with water and press the button so that water gets into the gap between the button and the body. It is important not to overdo it and “treat” the Home button with a small amount of water. We emphasize again that the effectiveness of the method is indicated by user reviews on.

Tighten the pentagonal screws on the bottom edge of the device

You can also “cure” the Home button from squeaking by tightening two pentagonal Torx screws on the bottom edge of the iPhone. It is important to use a specialized screwdriver designed to work with these types of screws. In this case, tightening the screws can actually get rid of the squeaky Home button problem.