home-Programs-How to use winsetupfromusb 1.8. The WinSetupFrom USB program is a universal program for turning a regular flash card into a bootable device

How to use winsetupfromusb 1.8. The WinSetupFrom USB program is a universal program for turning a regular flash card into a bootable device

WinSetupFrom program USB is a universal program for turning an ordinary flash card into boot device.
Difficulties for beginners may arise at the stage of managing this program, when, faced with a completely English interface, the user simply closes it and goes in search of a Russified, but weaker program.
In this article, an understandable manual for the program is disclosed.
Program installation
Before you start working with the utility, you need to download WinSetupFrom USB. The problem is that it is so popular that many resources offer to download it from them, adding a bunch of Trojans and suspicious programs.
This article provides WinSetupFrom USB instructions for its latest version, that is, 1.0.

Solution for 100% Disk Usage in Windows 10

What's good - no installer is required, just unzip the program and select the bit system that suits your computer. Available in 32 and 64 bit.
Generally, this program universal when working with flash drives, since in addition to creating a bootable and multiboot device, there are three more possible actions. But here the emphasis will be on the first.

1. A window will open in front of you, in which you can select the desired flash drive. In this case, the flash card will need to be formatted using AutoFormat it with FBinst , if you are recording images for the first time (do not forget to check this option), which will destroy all data on it.
it necessary measure to create a multi-boot device from a USB drive.
If the flash drive has already been used in WinSetupFromUSB to create a bootable device, then this step can be skipped.
2. Now you need to add the required installation software to the flash drive. If you download several distributions, then the flash drive will turn into a multi-boot device, which will significantly increase its functionality. This must also be specified in the options and the address to the required folders and files must be written in the line.
The line is opened by pressing the button with «…» on the right side.
Below are the options for different operating systems:
  • Grub4dos is needed if you install the program from Linux ISO(or other compatible ISO) or programs for restoring the system, for example, antiviruses such as Kaspersky or RBCD. Then Grub4dos will be needed here.
  • Bart PE (Win Builder or WindowsFLPC or UBCD4Win) - needed if the folder address includes I386. Their purpose is disks based on Win PE. The option is not for beginners.

  • Setup2003 is used for Windows XP or Windows 2000 to add folders from these operating systems. Also specify the folder name if the address includes I386 (or I386/AMD). Here you need to create a virtual disk image and set the path to virtual drive. Or open the ISO image with an archive unpacker, extract the files to a separate directory and specify its name in the WinSetupFrom USB window (specify the name of the disk containing the distribution kit when creating from a flash drive installation disk).

  • Server 2008(2012) for Windows Vista 7th and 8th versions. You also need to enter an address. virtual image with the operating system.
  • SysLinux BootSector , applicable if syslinux was used, this is the file loader in Linux system. Here you need to enter the path to the SYSLINUX folder.

How to download from the official website of Windows 10 for free

By entering all the necessary paths to desired files, you can press the Go button, go through the algorithm and in a few minutes you will have a ready bootable USB stick.
  • A small correction for those who have the 7th or 8th Windows - WinSetupFrom USB can slow down on copying windows.wim. It's okay, it's a minute lag.
In addition, the WinSetupFrom USB program supports writing a virtual image weighing more than 4 gigabytes to a flash drive, but already in FAT32 UEFI format.

That Windows installation any version can be produced from any hard drive or from a removable media, no need to say. This is what everyone knows. But what to do when installation is required on a netbook that does not have a CD / DVD drive? This is where you can apply the WinSetupFromUSB program. How to use this utility, now it will be considered.

Why you need to use a USB device

Let's start, so to speak, with the basics. As mentioned above, not all modern laptops are equipped with drives for use optical media information, in other words, ordinary discs of the CD or DVD standard, not to mention Blu-ray. In the event of critical failures, the situation is only aggravated, because it simply will not work to boot from the disk before starting the system.

This is where help comes in. special utility called WinSetupFromUSB. How to use the program will be discussed a little later, but for now let's focus on its main features and functionality. Let's start with the first version, known as modification 1.0. A little later we will consider the update WinSetupFromUSB 1.5. How to use this latest update, we will analyze on the basis of version 1.0 (hereinafter - 1.4). However, they are not particularly different. But with beta testing, you need to be careful.

How to Use WinSetupFromUSB 1.0: Preliminary Steps

If one of the users thinks that everything is so simple, then this is a deeply erroneous opinion. The problem is in the very question of creating a system image, which will later be used to write to a flash drive.

As it turns out, the same programs like UltraISO create bootable media, which then turns out to be completely unreadable. This is where the problem arises of how to use WinSetupFromUSB 1.4 or any other version. Let's dwell on the initial modification, especially since there are no special changes in subsequent upgrades (this will be discussed a little later).

You need to create bootable media from this program. Therefore, we will consider all the issues related to such a process (especially since without understanding some of the settings, you can make mistakes).

Installing the new version

For starters, you should pay attention to the version of the "OS" itself. AT best case free update will only affect modifications and Ultimate, not counting outdated versions Windows XP and 7.

You can download updates for any system from the official website of the program. By the way, there are also special packs designed for use in systems other than Windows 7, for example, the G8 and above.

WinSetupFromUSB 1.0 beta6: how to use it, what is it, is it worth it?

Now a few words about what is commonly called beta testing. How to use the WinSetupFromUSB program of this particular modification? Yes, just like everyone else. That's just in this case It is worth noting that any beta version of the application, whether it be at least Microsoft or the same Google, is unstable. And that is why installing this version is not recommended. It will “fly off” - the whole system will “close up”.

Updates and additional updates

On the other hand, the developer himself recommends installing the latest versions of the product immediately after installation. Such a “reminder” will constantly hang in the system tray, and getting rid of it, unlike Windows 10, is not so easy. But now it's not about that.

Let's say the update is downloaded. It is not yet a fact that the program will be able to integrate into the system automatically. First, you will have to run the installer as an executable "executable" file named Setup, and then follow the instructions of the installer.

Creating an image

The first step is to create boot image. Note that this procedure is very different from similar actions in programs like UltraISO, Daemon Tools or Alcohol 120%. Here the approach is somewhat different.

First, in the standard "Explorer" or in any other file manager, we call up the properties menu of the desired USB drive, and then select the partition formatting. Let's talk right away: modern systems refuse to use FAT32, so you will have to set at least NTFS ( mobile devices this file system is not supported).

Now there is one more main feature of the WinSetupFromUSB program. How to use at this stage? Here you need to pay attention to the direct launch of the application with the choice of the Bootice button, where the flash drive should be indicated on top of the line.

Next, we use formatting confirmation, after which we refuse to create logical partitions by selecting the Single Partition command. This is followed by the choice of the file system (in our case, NTFS). Then we simply agree with all the proposals, and at the end of the process, click the OK button.

Finally, we minimize all secondary windows and leave only the main menu of the program. Here we use the line below, and specify the path to the unpacked Windows image. Then press the OK button first, and then activate the process using the GO button. Everybody. The process has begun. As the reviews say, it usually takes a long period of time to spend on creating bootable media. It all depends on the system and the flash drive, which usually has restrictions on copying and rewriting.

BIOS settings

To download the installation to BIOS settings you need to select USB as the priority device.

True, not all users know that sometimes a flash drive may not be recognized. Why? Yes, only because it needs to be inserted into the USB connector even before the computer or laptop is turned on, and only then set to start from it. Otherwise, such a drive simply will not be recognized.

Conclusion

Well, the rest is simple. Universal method of downloading the installation Windows package from a flash drive just consists in using the WinSetupFromUSB program. How to use the utility, I think, is already clear. Moreover, even an uninitiated user should not have any questions. Another thing is that you will have to use either the original installation disk or a pre-created system image. Reviews of users note that there is nothing complicated about this.

The reviews also note: if UltraISO, to put it mildly, sometimes “spits” when creating an image of a system containing critical errors, nothing of the kind is observed in this case. The program simply ignores them and creates a copy of the system using general rules and standard options. And that is why it is very favorably different from all its counterparts and competitors.

Yes, and more. The fact is that the reviews of users who have applied this package in practice indicate that this application supports both 32- and 64-bit versions of operating systems, although it does not always work correctly. In some cases, unexpected errors may occur. Most often, the solution to problems can be to install the latest version of the DirectX package, . NET Framework, Java support or Flash. In addition, it is worth paying special attention to some specific settings of Internet browsers such as Chrome and programs created on its basis. They are capable of causing errors even when updating the system or when running a regular antivirus.

With this program, you can quickly create a multiboot flash drive with different versions Windows (as an alternative). You can also place SisLinux and Gparted on a flash drive. The program is free, so use everything simply and conveniently. AT full news you can learn how to write an image to a USB flash drive using this program.

Preparing a flash drive

We connect the experimental flash drive and run WinSetupFromUSB. We make sure that the right one is indicated in the list of media at the top USB stick. And press the Bootice button.

In the window that appears, click "Perform Format", before turning the flash drive into a multiboot one, it must be formatted. Naturally, all data from it will be lost, I hope you understand this.

For our purposes, the USB-HDD mode (Single Partition) item is suitable. Select this item and click "Next Step", specify NTFS format and optionally write a label for the flash drive. After that - "OK". In the warnings that appear that the flash drive will be formatted, click "Ok". After the second such dialog box, for some time visually nothing will happen - this is directly formatting. We are waiting for the message "The partition has been formatted successfully ..." and click "OK".

Now in the Bootice window, click the "Process MBR" button. In the window that appears, select "GRUB for DOS", then click "Install/Config". In the next window, you do not need to change anything, just click the "Save to Disk" button. Ready. Close the Process MBR and Bootice window, returning to the main window of the WinDetupFromUSB program.

Choosing sources for multiboot

In the main window of the program, you can see fields for specifying the path to distributions with operating systems and recovery utilities. For Windows distributions you need to specify the path to the folder - i.e. not just to an ISO file. Therefore, before proceeding, mount the images of Windows distributions in the system, or simply unpack ISO image s to a folder on your computer using any archiver (archivers can open ISO files as an archive).

Put a tick in front of Windows 2000/XP/2003, press the button with the ellipsis right there, and specify the path to the disk or folder with the Windows XP installation (this folder contains I386/AMD64 subfolders). We do the same with Windows 7 (next field).

For Live CD nothing needs to be specified. In my case, it uses the G4D bootloader, and therefore in the PartedMagic/Ubuntu Desktop variants/Other G4D field, we simply specify the path to the .iso file

We press "Go". And we wait until everything we need is copied to the USB flash drive.

Upon completion of copying, the program issues some license agreement… I always refuse, because. in my opinion it has nothing to do with the newly created flash drive.

And here is the result - Job Done. The multiboot flash drive is ready to use. On the remaining 9 gigabytes, I usually write down everything else that I need for work - codecs, Driver Pack Solution, kits free programs and other information. As a result, for most of the tasks for which they call me, this single flash drive is quite enough for me, but for solidity, of course, I take a backpack with me, which contains screwdrivers, thermal paste, an unlocked 3G USB modem, a set of CDs for various goals and other personal belongings. Sometimes they are nice.

Yes, and you have the wrong information about WinSetupFromUSB: you cannot simultaneously write installation images Windows 8.1 and Windows 7 on a flash drive. Or, for example, two different sevens. In addition, the number of recorded images is limited: one of each type.
I have a 32 GB multiboot flash drive with the following contents: WinXP, Win7, Win8, ubuntu linux, Microsoft Diagnostic and Recovery Toolset (MSDaRT) All in one, Kaspersky Rescue Disk and disk-resuscitator with programs. All recorded at help WinSetupFromUSB. You just need to burn the images not all at once, but one after the other (sequentially), and format only the first time. If you need to delete something, just delete the image from the flash drive and delete the entry about it in the menu.lst file (located at the root of the flash drive).

Good day!

A lot of questions arise when creating bootable flash drives(well, in general, in the space around this topic ☺). Especially now, when there are more and more PCs / laptops on sale that come without a CD drive (and sometimes without a pre-installed Windows OS). Those. I am leading to the fact that without bootable flash drive/disk - not so easy to do ☺...

One of the most convenient programs for preparing and creating installation (bootable) media is WinSetupFromUSB. Most main criterion, why the choice fell on it - it's functionality, free of charge and ease of use.

Judge for yourself, the utility is able to create bootable USB drives that will work on a variety of PCs and laptops: i.e. universal option , suitable for both UEFI and BIOS. In general, even if you do not understand the latest encryption, I will say this - created by us boot drive(in this article) should allow you to boot on most computers/laptops.

So, let's get down to business...

How to create a bootable USB flash drive for Windows 10

❶ What you need to get started

1) WinSetupFromUSB utility

In my opinion, this is one of the best utilities for creating bootable flash drives. Firstly, it is free and does not need to be installed, and secondly, it works great and supports most operating systems (Windows XP, 7, 8, 10), sees all the drives connected to the system, and allows you to easily format them. In addition, it can make multi-boot media (with multiple OS), keeps an event log, etc.

Where to download the WinSetupFromUSB program: on the official website (the link is given above), I recommend choosing latest version(currently it is 1.8).

Also, a very important plus is (I already mentioned this a little higher) that WinSetupFromUSB allows you to create bootable USB sticks, which can boot into both BIOS and UEFI (i.e., a kind of universal option that will work on the vast majority of computers).

2) Bootable ISO image with Windows 10

In general, such an image can now be downloaded even from the official Microsoft website. It is highly desirable to use an ISO image on which there is one specific version of the OS (with one bit depth). Let me explain with an example:

  1. good choice: " Windows 10 Home x64";
  2. bad option: "Windows 10 - 20 in 1 (x86 + x64)"- with all these assemblies (from craftsmen), with different versions of bitness, with several versions of the OS, there are many errors and problems (both when creating installation drives, and when they are subsequently used).

Remarque!

About the bit depth of Windows, and than 32 bit system different from 64 - see this article:

3) A flash drive of at least 4 GB (preferably 8 GB or more)

The most common USB flash drive is 4-8 GB (preferably 8 GB, because many ISO images with Windows 10 are larger than 4 GB).

Remarque!

How to choose a flash drive high speed work (what to look for when choosing a flash drive) -

❷ Run WinSetupFromUSB

Downloaded program file WinSetupFromUSB(from the official site) is regular archive, packed with 7-Zip. In order to extract all the program files from it, you just need to run it.

There are two versions in the program folder: for x64 and x32 systems. If you don't know what OS you have, try running both files one by one (if you open the wrong file, the program simply won't start, giving an error).

❸ Set boot image recording settings

1) To get started copy everything you need from a flash drive with which we will work (in the process Windows entries- everything will be deleted from it). Next in WinSetupFromUSB click the button Refresh so that the program "sees" your drive (see arrow-1 on the screen below).

2) Then check the boxes next to the following items: Auto Format it with FBinst, FAT 32, align, Copy BPB (as shown in rectangle-2 on the screen below). By doing this, we will format and bring the flash drive to the boot type.

3) In line 3 (see screenshot below) "Vista/7/8/10/Server 2008/2012 based ISO" indicate your boot image with windows 10(if there is a warning, as I have in the screenshot below, just agree. This window says that the image with Windows is more than 4 GB and write such a file to file system FAT 32 is not allowed (note: WinSetupFromUSB utility will break it, so that everything is in order here ☺)).

4) Well, to start the utility - press the button GO.

WinSetupFromUSB Settings

By the way, below is another screenshot of how all the settings look, only without my underlining.

❹ We confirm and give consent to format the flash drive

After pressing the button GO- the utility will warn you that all data on the flash drive will be deleted. Therefore, once again I advise you to first transfer all the data, make a backup.

By the way, as many as 2 warnings (usually) ...

During work WinSetupFromUSB is better do not run resource-intensive applications (games, video and photo editors, etc.) and do not close the program window (sometimes, it seems to some that it is frozen, because it does not show signs of life ☺. But this is not so, at the bottom a small green bar "fills up" in the window, the inscriptions about the state of the process change - these are the indicators).

If the drive was successfully created (and no errors occurred during the process) - you should see small window with one short sentence Job Done(work completed). Now the flash drive can be used ...

❺ Checking how the flash drive works

To check the drive, I used relatively modern laptop with UEFI. calling boot menu- the laptop showed that it sees the flash drive (as well as installed on the hard Windows disk). I tried booting from a flash drive.

Note! Instructions on how to enter the Boot Menu ( boot menu) - . It may be required when you need to boot, for example, from a USB flash drive.

So here it is, and difficult, and simple at the same time.

Additions are welcome...

This photo shows the finished result of a bootable USB flash drive. Used was 8 gigabyte.
As you can see, there are 6 functions in the flash drive menu (you can do less and more - it all depends on your imagination).
Now everything is in order.
0 is a Live CD boot. With a crashed Windows, you can save important content from disks.
There are many other possibilities as well. Check disks for errors, viruses, etc.
1 - Installing Windows XP SP3
2 - Installing Windows 7 Ultimate 32/62 bit
3 - Booting the computer from disk C (should be the last one, but it turned out like this)
4 - Acronis BOOT CD 2012 - with Acronis Disk director and Acronis True Image
5 - Acronis BOOT CD 2013 - it's just newer in case the old one doesn't see the hard drive.

The menu labels have been edited to make it clearer to me.

Now about the procedure itself. You need the program itself - WinSetupFromUSB 1.3
You can download
The archive contains two files to run - for 32 and 64-bit Windows.
We also need disk (disk) images in iso format or the bootable CD/DVD discs themselves. From them, if necessary, you can create an image, for example, with using Ultra ISO.

Here is an example of creating a bootable USB flash drive with Windows 7

Choose file NTFS system, agree that all data on the flash drive will be deleted. The formatting process will begin. After that, the process of loading the image will begin. If FAT32 is selected, the program will refuse to write images larger than 4 GB, FAT32 does not "know" about such files - legacy system. But it will offer to format it in NTFS. Truth in English. You can simply format without writing the image. And the next step, without formatting, is to write the image.
Wait for this message:

Everything, the flash drive is ready for Windows installation 7 on a netbook.

Then you can upload additional disk images to this USB flash drive in the same sequence. You can also download the image of Windows 8, but I have not tried the Ten.
But don't check the Format box.
There are download options installation Windows XP:
First you need to unpack the contents of the XP image (files, folders) into any created empty folder. In the program, respectively, use top window(strip):
Windows 2000/XP/2003 Setup

To burn an Acronis Boot CD image to a flash drive- select the program option:
Linux ISO/Other Grub4dos compatible ISO
Accordingly, check the box next to this window and specify the ISO image of Acronis Boot CD
And the GO button. I don’t make a screenshot, I think everything is clear.

To burn a Live CD used another way:
unpacked Live image CD (I had a Win7 Live CD x86x64 by Xemom1) into the created empty folder, the only folder in the image was named XMPE.
Then I copied it to the root of the flash drive, and added the following lines to the menu.lst file, which is on the flash drive:

Title Win7 Live CD x86&x64 by Xemom1

At the same time, I also edited the menu lines that are displayed on the screen when the flash drive is launched.
Each line starts with title words then a space, and then write whatever is more convenient for you.
Don't touch everything else. True, I changed the waiting time from 10 seconds to 30.
and save the menu file - menu.lst opens as a plain text file.
This is what I got - this is the text of my menu.lst file
Of course, it will be different for you - depending on which images you choose for this.

Color black/cyan yellow/cyan
timeout 30

#graphicsmode 0x6A
graphicsmode -1 640 480:800 24:32 || graphicsmode -1
## Menu AutoNumber
write 0x8274 0x2001

#graphicsmode -1 800:640 -1 24:32 || graphicsmode -1
#font /unifont.hex.gz

#clear mappings and set root in case we return from bootmgr
map --unmap=0:0xff
map --unhook
map --rehook
ls /usbdrive.tag > null || find --set-root --devices=hf /usbdrive.tag > nul
ls /default > nul && default /default

Title Win7 Live CD x86x64 by Xemom1
chainloader /XMPE/WinPE/bootmgr

Title Setup Windows XP SP3 2013
map --unmap=0:0xff
map --unhook && map --rehook
savedefault
ls /usbdrive.tag > null || find --set-root --devices=hf /usbdrive.tag
configfile /winsetup.lst

Title Setup Windows 7 Ultimate 32x64 bit by Gorskiy
map --unhook

savedefault +1
ls /shiftd.bat >
/shiftd.bat

root(hd%RDSK%,0)
chainloader /BOOTMGR

Title Boot first internal disk ( boot disk C or Your Windows)
map --unhook
map --unmap=0:0xff && map --rehook
savedefault
ls /shiftd.bat > nul || find --set-root --devices=hf /shiftd.bat
/shiftd.bat
if "%RDSK%"=="" pause Fatal error while swapping hard drive order, cannot continue! && configfile /menu.lst
pause --wait=1 Booting MBR on hd0 ...
chainloader (hd0)+1

Title Acronis BOOT CD 2012
map --unmap=0:0xff
map --unhook && map --rehook
cat --hex [email protected](md)0x3D0+0x130 >
set /adev=*0x8280&0xff
root(%dev%,0)
set ISO=/ISO/AcronisMedia.iso
ls %ISO% >
ls %ISO% >



set /adev=*0x82a0&0xff
debug 1

debug off
set check=%check:~-5.4%


map --hook
root (0xff)
chainloader (0xff)

Title Acronis BootCD WinPE-Based 2013
map --unmap=0:0xff
map --unhook && map --rehook
cat --hex [email protected](md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst
set /adev=*0x8280&0xff
root(%dev%,0)
set ISO=/ISO/AcronisBootCDWinPE-Based.iso
ls %ISO% > null || find --set-root --devices=hf /usbdrive.tag|| echo Error! could not find usbdrive.tag && echo && pause Press any key to return to the main menu && configfile /menu.lst
ls %ISO% > null || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo && pause Press any key to return to the main menu && configfile /menu.lst
map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst
#http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531
#http://www.rmprepusb.com/tutorials/tails
set /adev=*0x82a0&0xff
debug 1
parttype(%dev%,3) | set check=
debug off
set check=%check:~-5.4%
if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO%
if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst
map --hook
root (0xff)
chainloader (0xff)

Related posts: