Who uses my wifi. How to view and disable unnecessary users on my Wi-Fi router

On our website, there are already similar instructions for routers from ZyXEL, Asus, and D-Link. But I haven’t written yet about how to see who is connected to Wi-Fi if the router is from TP-LINK. There are some nuances there, so now let’s look at everything in more detail.

I don’t know why, but many people are interested in the question of who else is connected to my Wi-Fi, who is “stealing” the Internet and how to block it. I can immediately say that if you have installed good password on a Wi-Fi network, you are unlikely to see it in the list of connected clients third party devices. A good password must be set, of course. There is even a thread on this topic.

So, if you have doubts, and it seems to you that someone else has “picked up” your Wi-Fi, then you can check it without any problems. And if you have a TP-LINK router, then these instructions are for you.

TP-LINK: how to find out who is connected to my Wi-Fi and block the device?

In settings go to the "Wireless" tab (wireless mode). If you have a dual-band router, then open the tab with the right network(2.4 GHz, or 5 GHz). And immediately go to "Wireless Statistics" (statistics wireless mode) .

There, a table will display all the devices that are connected to your Wi-Fi. You can click on the "Refresh" button to refresh the list.

To be honest, the information there is not very informative, so I advise you to go to the “DHCP” tab – “DHCP Client List” (list DHCP clients) . At least the name of the device will be indicated there.

If you find some device there that is not yours, you can block it. It is best to block by MAC address. But, there is another way: simply change the Wi-Fi password. And all devices that were connected to your Wi-Fi will “fall off” themselves. And you will connect with a new password.

Blocking Wi-Fi clients by MAC address on a TP-LINK router

From the tables above that I showed, copy the MAC address of the device you want to block. Go to the "Wireless" tab (wireless mode)– "Wireless MAC Filtering" (MAC address filtering).

Filtering must be enabled (in the Enabled status). And the blocking settings are in the “Deny” status. Click on the "Add New" button to add a new device.

We indicate the MAC address of the desired device, enter a custom description, and save the rule.

Reboot the router. A blocked device will be disconnected and will no longer be able to connect. But, I would also change the password Wi-Fi networks.

How to view the list of Wi-Fi clients if the router is TP-LINK with a new settings page

Some top models routers from TP-LINK have already acquired a new web interface. Basically, these are devices from the Archer line (but not all). In the settings, in the new control panel, go to the "Basic" section at the top (basic setting). You will see a network map. There will be wireless clients. Click on them, and a list of devices that are connected to your Wi-Fi will appear on the side or bottom.

It’s a pity that they didn’t make it possible to block devices directly from this table.

To block devices on routers with new firmware, you need to go to the "Advanced" section (additional settings) . Then open the "Wireless" tab (wireless mode)– “Wireless MAC Filtering”, and create a rule as I showed above.

That's all. Now you know how you can view a list of all devices that are connected to wireless network. And, if necessary, block individual devices.

Very often speed home Wi-Fi can be unstable. This is due to the congestion of wireless network channels. Almost every neighbor has a router, which can interfere and degrade your network.

If after this you notice a drop in speed and are sure that the provider has nothing to do with it, it’s time to scan the network for unauthorized connections.

A neighbor could easily guess the password to your Wi-Fi, or maybe you blurted it out yourself in a conversation or recently allowed him to connect for a day while his Internet was down.

How to manually find a “rat” on your home network

Experienced users will immediately launch their router’s web interface and go to the section with active connections. If unidentified device at this moment it downloads megabytes at your expense, it will appear in the list.

Not everyone can scan the network this way. You need to remember the IP address of your router and the password that was set a long time ago. If a friend or a representative of the provider helped set up the network, it will be almost impossible to find the necessary data.

Here's a hint just in case:
D-Link 192.168.0.1
TP-Link 192.168.0.1
ZyXEL 192.168.1.1
ASUS 192.168.1.1
TrendNet 192.168.10.1
Huawei 192.168.100.1
ZTE 192.168.1.1
Netgear 192.168.1.1
Tenda 192.168.0.1
Sercomm 192.168.1.254
Xiaomi 192.168.31.1

In some cases, for example, for AirPort routers, it will come to the rescue special application. However, not all manufacturers produce proprietary utilities.

How to quickly deal with the problem

On Mac App Store There is large number paid and free utilities, which will quickly scan the network and show all connected devices. This is convenient because it does not require any logins or passwords; the applications clearly display information and can notify you when new gadgets are connected.

This utility, with a self-explanatory name, is designed to track “left” connections to your home network. When you first start it will scan and the program will show all active devices.

On an iPhone or iPad, for example, just go to Settings – Wi-Fi and click on an existing connection. The very first line in the statistics will tell you the device address.

In the utility we mark our gadgets, you can change the icon and rename the device. When all connections are identified, it will be clear which other devices are connected to Wi-Fi.

After this, the application will notify you about new connections. If a neighbor decides to use your network, you will immediately know about it.

In addition to the IP address, the device name and manufacturer information are available. Now you can accurately identify devices without having to check addresses.

The application cannot notify about new connections; you can only change the scanning interval and periodically check the list of devices.

Another free scanner network, which will find and display all active connections. The utility does not have any useful parameters; everything just works after installation and launch.

A useful online informer will appear in the menu bar.

What to do with unauthorized connections

First, remember your smart devices. Wireless sockets, lamps, air purifiers and other gadgets that connect via Wi-Fi will also appear in the list.

When you have identified each device and found a suspicious device, it’s time to think about the security of your home network.

There are two options to disable your neighbors: change the password for your home network or restrict network access for neighbor’s devices.

In any case, you will have to go to the router’s web interface and make the appropriate changes to the parameters. When you change your password, you will need to reconnect all your home smartphones, tablets, computers and smart electronics, and to deny access to other people's devices, you will have to dig a little into the settings.

Thanks to re:Store for the useful and interesting information.

The main problem when using wireless internet network is access to it by third parties. Additional devices reduce the amount of data transferred over a period of time. Therefore, they often enter “How to find out who is connected to my wifi” in search engines. It's actually very simple.

Illegal connections cause the router to malfunction, namely:

• a sharp decrease in connection speed due to traffic consumption by other persons;
• restrictions on visiting certain sites;
• When you turn off all equipment from the network, the router indicator continues to blink or remains on.

All these signs indicate that the wifi channel is being used by someone else, secretly from the owner of the router.

How to find out how many devices are connected to my Wi-Fi

Determining how many connections a particular WiFi has is fairly easy. To do this, do this:

• type the IP address of the router into the browser text field (usually it is indicated on the network module body);
• enter credentials in the requested window;
• look at the number of all gadgets displayed in the interface by the network module.

More specific information can be seen through " System log" The MAC addresses of all network devices. All that remains is to compare the information with the list of equipment available in the house.

Checking who is connected to my Wi-Fi

In the absence of access to network module should be used third party programs. The most common option for seeing who is connected to wifi is Wireless Network Watcher. The file can be downloaded for free on the manufacturer's website. The program scans a list of addresses on a given network and shows detected devices. The following are displayed on the screen:

• name of personal computer;
• network card details;
• unique equipment identifier;
• protocol address.

On each specific router you can view the list of clients as follows:

1. TP-Link. In the general menu on the left there is a section “Wireless mode statistics”. Disable unwanted device A MAC address filter will help.
2. Asus. You must select the “Clients” item. IN right side A table will be displayed showing all clients.
3. D-Link. In “Advanced settings” you need to select “Station list” in the Wi-Fi item. Disable connection with outside client you can by selecting “Disconnect”.
4. Zyxel. You need to go to the section " System Monitor" and select the "Home Network" tab. Below is a list of gadgets.

To find out which devices are connected to Wi-Fi unauthorized, you should turn off the radio modules on phones and tablets for a while. Next, on the keyboard you need to press Win + R (Windows logo plus the English symbol), and then cmd. Next you should enter ipconfig /all. This way you can find out information about your PC - network name and MAC address.

How to protect your Wi-Fi network from hacking

To prevent the transfer of information to other devices, you need to use the router control panel. The left device can be “Rejected”. This will mean blocking its connection to the Wi-Fi network.

There are other tips to help protect your network from hacking:

1. You must enable the MAC address filter and add only those devices that are allowed access.
2. You must not share your password with anyone.
3. You must use Wi-Fi protection with a long password with WPA authentication
4. It is recommended to hide the SSID. This will allow you not to display the distributed network, otherwise everything will be the same.

If other devices, such as friends or family, are connecting to your home network, you need to create a guest network. Modern routers have a similar function.

Programs for monitoring connections

In order for the router to warn the owner about the connection of foreign gadgets, it is worth installing the Network Watcher program, which was described above. It is suitable for all Windows.

An executable file is also used to control the connection SoftPerfect WiFi Guard. It is a specialized scanner that checks networks after a certain period of time and gives a signal if an unknown gadget is found. You can download the program from the official website. The installation process is the most standard and straightforward. As a result, a window will appear to confirm the language.

In the program window, you need to select your router; in the “Advanced” tab, you can set an alert signal when connections are found. It is possible to scan the network for presence third party users. You can add devices to allowed devices and remove them from the list by clicking the check mark.

Knowing which devices are connected to Wi-Fi, you can regularly use home network without any interference. The main thing is to follow all the recommendations and distribute the router password only to selected people.

I recently wrote an article in which I talked about how to view a list of connected devices via Wi-Fi. In this article we will look at all connected devices to your Wi-Fi on D-Link routers. I will show you with an example D-link models DIR-615, which we configured in . If you wrote in the search something like “how to see who is connected to my wi-fi,” then you hardly need to explain what’s what and why it’s needed. But, for those who are not in the know, I’ll quickly describe everything in a few words.

Here you have a router (in our case D-Link). He distributes Wi-Fi. Your network is most likely under a password, and no one else will connect to it except you. But at one point the question arises: “what if someone hacked my network and connected to it?” There may be other reasons why you might need a list of connected devices to your wireless network, but in most cases, it goes something like this.

What you can find out about the connected device:

• MAC address
• Device name (computer name)
• Assigned IP address
• Connection time
• The number of bytes sent and received.

It is possible to disable desired device directly in the router settings. You can also block the desired device, but I will write about this in the next article.

We look at the list of devices connected via Wi-Fi on D-Link

Go to the settings of your D-Link. It's very easy to do. In the browser we type the address 192.168.0.1 and specify the username and password. The default is admin and admin. If you changed them, please indicate yours. You can.

To view all connected via Wi-Fi devices, in settings D-Link router There is special page. Go to the tab WiFi - Wi-Fi list clients.

You will see a list containing all connected to at the moment devices.

To update the list, click the button Update. It's a pity that the device name is not displayed in the list. But, this information is displayed on the DHCP page. To view this information, go to the tab Status - DHCP. But, devices that are also connected via a network cable will be displayed there.

There is another page in the settings that very coolly displays information about almost the entire router, including connected devices. Just go to the settings tab Monitoring.

It displays detailed information about all connected devices, Internet connections, Wi-Fi settings network, firewall status, etc.

To forcefully disconnect the desired device from the router, then on the tab WiFi - List Wi-Fi clients just select the device you need (you will have to navigate by MAC address, or check the MAC address with the name on the DHCP tab) and click on the button Disconnect.

The problem of traffic leakage has become especially urgent.

It would seem that you are not downloading anything, but the statistics show that several hundred gigabytes have been downloaded over the current day/week/month.

If not you, then who did it?

How to see who is connected to your wifi D-link?

First you need to go into the settings of the router itself. For these purposes, enter in the browser standard set IP address digits(). If the system starts to “quarrel”, then change the address to 192.168.1.1.

You will see a typical dialog box in which you need to enter your login and password.

The windows may differ from each other, but their essence is the same. Login – admin, password – admin.

Go to the main router settings menu.

Immediately you need to switch from basic settings to extended, otherwise you won't see anything. For these purposes, there is a corresponding menu at the bottom right.

We are interested in the “status” item and the double arrow to the right of the name. Click on it until you come across the “client” link. That's what we need.

Displayed here full list all devices and gadgets that consume traffic via Wi-Fi. Count how many of them belong to you.

In particular, the following can work from the router:

• laptop ;
• tablet ;
• TV ;
• game console etc.

If the number of subscribers significantly exceeds the number of “allowed” devices, it means that someone has illegally “sucked in” to your source.

There are 2 options to solve the problem:

1. Setting a password;
2. Changing it to a more complex one.

Important! Password your access point if you haven't already done so. Firstly, you will benefit in data transfer speed, because traffic will not be scattered over outside users, and secondly, protect yourself in the future.

How to see who is connected to your wifi TP-link?

Perhaps the most famous company supplying network equipment. Setting it up and viewing the list of connected devices is not difficult.

So, how can I see who is connected to my wifi tp-link? At first, you will be required to enter the same standard IP, i.e. 192.168.1.1.

Pay attention! If you have not previously changed your login or password, then enter “admin” in both columns.

In order not to tinker with all the settings and search for parameters at random, switch to the “Wireless” tab. Next, click on the “Wireless statistics” sub-item.

Here is a list of all devices that are currently connected to your Internet network via Wi-Fi (in in this case- 2). You can see 3 columns:

1. MAC address;
2. Encryption type (same for all);
3. Number of transmitted packets.

The choice of options is, of course, meager, but this is all the available statistics.

Besides Wi-Fi connections You can also look at those who are powered from your router “the old fashioned way”, i.e. via cable. To do this, open the “DHCP” - “DHCP Client List” tab.

There are also 3 data columns available here:

1. PC name;
2. MAC address;
3. IP address.

Thus, you can “detect by IP” someone who has not quite legally connected to your network and is blatantly stealing traffic.

And just in case, change your router access password or enable this function if you have not done so before.