Problems with the memory card. Problems with the memory card The computer does not see the redmi, what should I do?

Recently, complaints from owners of Xiaomi phones and tablets have become more frequent that Mi PC Suite installed on a PC does not see the phone under any conditions, displaying the message “Connect your device via USB”. Almost all popular devices in the line are susceptible to connection errors - Redmi Note 4 Pro, Mi5, Mi6, Mi Max, etc. Let's try to figure out the problem together and find a solution.

What is the essence of the problems?

In fact, the list of reasons is huge and varied. Here are the most common cases:

incompatibility of the program and the Android firmware version on the phone;
damage to the cable or damage to the USB port;
viruses;
blocking by firewall, antivirus or firewall;
using outdated drivers.

To get to the bottom of the problem, you will have to try all available ways to solve the problem. But, alas, there is a possibility that the device will never be recognized by your PC. Let's get started.

Possible solutions

First you need to make sure the connection cord is intact. If possible, it is advisable to use original cable, because using store-bought “Chinese” cord may cause a similar problem. At the same time we check the work USB interface. Try connecting the device to all available ports. If you have a second laptop or PC, we try to do the same on it. You shouldn't rule out damage to the interface on the phone itself, but there's no way to check this without special skills - an exception if you have another similar device.

Setting up the connection

Sometimes it happens that it is disabled Debug mode. To do this we go to "Settings" device - “About the device”– looking for an item with a description MIUI versions and click on it more than 5-10 times, a menu will pop up "For developers", and here we activate “USB Debugging”. Please note that when connecting, a menu for selecting the connection type may open. We are interested in the format MTP.

If the phone is not detected, but is charging, then slide the lock window and see if there is an inscription on the screen "Tune". You will need to perform the procedure every time you connect. It is likely that this problem will be corrected with subsequent firmware updates. If everything is not clear, then here is a video instruction.

Chinese version of Mi PC Suite - why download it

Now we need to determine which firmware version is installed on the device. The problem is that Mi PC Suite does not work with Android Marshmallow and higher. If you have this version of Android or higher, then only the Chinese version of MiPS can help, which also opens up other possibilities. Unlike the adaptive version, in some cases it will still be possible to establish a connection if the PC does not see the phone.

If you have an Android lower than Marshmallow, then it is likely that the problem will be solved with a software update. To do this you need.

In some cases, it is better to open the program and wait a few minutes, and then connect the gadget.

MIUI version update – “You need to update your device”

Sometimes when you try to connect, a message appears asking you to update the MIUI firmware to the latest version - “You need to update your device to use Mi PC Suite”. This happens even with devices that have the latest firmware version. As before, the Chinese version of the software will help solve the problem.

Alternative – WiFi

It is possible to manage and transfer files without a cord. Many users forget about Wi-Fi technology and its capabilities. With its help it is absolutely possible to set up a wireless connection. The best option is to download file manager, working with ftp. This function is much more convenient to use. In addition, this is one of the few options to exchange data when other types of connections are not available.

Quite often, most users need to transfer important information from their phone to a personal computer or vice versa. The procedure is simple at first glance, but many people still have a question about how to connect a Xiaomi smartphone to a computer via USB without the slightest problem and what is needed for this.

Popular reasons why the computer does not see the connected phone

Let's start with the basics: for example, you know all the stages of connection well, but the computer simply does not recognize the device. There may be several reasons:

Lack of necessary drivers on PC;
The cable is of poor quality, dirty, broken;
Problems in the operating system (virus or simple glitch);
The connectors on the system unit are clogged, meaning that something got into them (or they are simply not working).

The first and most basic thing is to check if crumbs, dirt, or dust have gotten into the connectors. Very often foreign bodies accumulate there, and because of this, electrical contact does not occur. Carefully clean everything with a wooden toothpick, and then use special plugs. Now let's discuss the rest of the steps.

The standard way to connect a Xiaomi smartphone to a computer

As mentioned above, there may be several reasons for problems, so I will try to explain to you in as much detail as possible what to do and how to do it. You need to follow our points consistently to avoid problems in the future. I present several steps for correctly connecting your phone to a computer, but if you are absolutely sure that you have already completed one of the steps before, you can skip it.

Step 1: Install drivers on PC

As noted above, in many cases problems arise from drivers. Sometimes, when connected, they install themselves and update at the right time, but if this does not happen, we carry out the procedure ourselves.

We search on the Internet on trusted sites (preferably on w3bsit3-dns.com, based on the model of your Xiaomi phone) two archives " Program for MediaTek" And " Program for Qualcomm" The names may differ slightly from those indicated. Typically the file size is small, within 15-20 megabytes. After downloading, we begin standard unzipping. Now we transfer the files from the “Downloads” folder so as not to accidentally delete them. The best place is the “root” of the system, that is, the system drive (in most cases this is drive C). Usually, but if there is no such notification, we restart the computer ourselves. That's it, ready.

Please pay attention! If you are the owner of Windows 8 or Windows 10, be sure to disable the digital signature of the program before installing drivers.

Step 2: Enable USB Debugging

This is also a good method, which often helps if the computer does not recognize the phone, but on the smartphone, on the contrary, a successful connection is displayed. Let's go to " Settings", scroll to the very bottom of the screen and find " Additionally" The item “ For developers" We find the corresponding inscription “ USB Debugging" and put a tick.

Don't forget that this is only possible if you have developer rights. Want to get them? The procedure is extremely simple.

Go back to “Settings” – “About device”. Next “Current version of MIUI”.
We begin to click on this inscription about 7 times. When the notification appears " You became a developer- we stop. Ready.
After that, go to settings again (press back), and scroll down. This item should be there.

For reference! On my Xiaomi Mi5 it was in the “Advanced Settings” subcategory, somewhere in the middle of the settings.

If you don’t find the “For Developer” option, it means the antivirus is at fault. Return the device to its original factory settings, remembering to first save all important information on additional media (a memory card is not suitable; materials may be automatically deleted from it during a reset).

Step 3: Switch Camera Mode

Sometimes it happens that the computer sees the smartphone, but only works in camera mode. That is, you can transfer photos and pictures, but copying documents, music, and files is not available. Of course, many people are not happy with this. We hasten to please you: the problem that has arisen is solved, and quite simply.

As soon as the connection occurs, in the first seconds we receive a corresponding notification in the notification shade. Quickly click on it. A small window appears asking you to select:

Charging only;
File transfer;
Photo transfer.

Accordingly, we need the second option, it is also called MTR. If you did everything correctly, the device will now be recognized as a drive.

Step 4: Use the computer settings

Sometimes it happens that the connection icon simply does not appear in notifications and cannot be found even on the main “My Computer” screen. The problem here is with the PC itself. We find the “Start” menu, look for “ Device and Printers" The phone model should appear, right-click on the inscription, the standard settings menu opens. Now “Troubleshoot” and “Update driver”, it’s worth resorting to the first step.

Reboot your computer and preferably your smartphone. It should help.

Connect Xiaomi phone to PC using Terminal Emulator

This more complicated way, which is already produced using a third-party application. It directly affects the operation of the operating system, so we strongly recommend that you proceed with this operation only if you are confident in your knowledge and skills!

Download the application from Google Play and install it in the standard way.
Open the program, write “su” in the terminal and click “Confirm”.
Next, enter the phrase "setprop persist.sys.usb.config mtp,adb." It is necessary to type strictly without errors, without using capital letters and placing punctuation marks correctly, otherwise the command will not be executed correctly.
Click " Enter" Further " reboot» – « Enter" The reboot starts automatically. Ready. This method is only relevant for connecting to media device mode.

If you need USB storage mode, do the following: all steps are similar, except for the second. In place of the long entry we type "setprop persist.sys.usb.config mass_storage,adb." Unfortunately, this option may seem complicated and confusing, but for many Xiaomi users it instantly helped solve the problem.

Connection on different Xiaomi models

Usually all operations on Xiaomi:, etc. are similar, but not here. Each device model has, accordingly, different firmware versions, different settings and even different operating systems. All this directly affects the connection and the occurrence of possible problems.

Therefore, in future articles we will talk in detail about the actions on popular models. Detailed instructions for each Xiaomi model, explanations and tips will be included. And you will receive an answer to any question you are interested in in a special section; if you do not find the information you need, feel free to contact us in the comments. Don't forget about official supportXiaomi, where you can write at any time!

Video instruction

How to connect Xiaomi to a computer: standard method

First, connect your phone to your computer via USB and check the simple functionality.

Instructions:

Insert the cables into both connectors;
Open the top curtain menu on your phone in the notifications tab;
A line should appear there notifying you of the connection;

Click on it and you will go to the connection settings;

So, the connection may not happen if you have both options disabled as shown above. Activate the first field “Media device (MTP)” - this way you can transfer any data from your phone.

Use the second mode “Camera (PTP)” only when you need to transfer only photos to the PC. This way, the computer itself will open the folder with images, and you won’t have to search for long. But keep in mind that in this mode the phone does not see folders with other files.

The phone does not see the computer: check from the PC

A similar check as described above can be carried out from a computer. Perhaps the computer did not recognize your smartphone and placed it in a folder with unidentified devices.

How to check it:

Go to the control panel on your PC;
Select the “Hardware and Sound” tab;
Next – “Devices and Printers”;
In the “Multimedia Devices” tab, find the name of your phone model, right-click the menu and click on “Troubleshooting”;
Next, the computer will detect the presence and absence of problems and offer solutions if necessary;
Ready!

On Windows 8/Windows 10, the names of these tabs will be slightly different.

Why Xiaomi does not connect to the computer: reasons

In those. Support and service centers often receive questions about the phone not being connected to the computer. There are a number of reasons why the connection may not occur, and before asking for help from specialists, make sure that you have checked everything.

The computer does not see the Xiaomi phone because:

You have a non-original USB cable. For example, you did not buy it in the brand store itself, or it may be defective.
The cable is dirty and contains internal debris. Many people notice that, when dealing with a connection problem, they find a lot of small debris or dust in the cable or connector on the computer. Be sure to check your wires and clean them gently with toothpicks if necessary.

To avoid such situations, use special plugs for wires!

The cable is broken/bent. When cables bend, the wires inside them come loose and they can no longer perform their intended function. In this situation, you will just need to purchase a new cable;
The necessary drivers are not installed on the computers. Perhaps this is the first time you are connecting your phone to a computer, or it is possible that some kind of failure has occurred in the system.
Using the wrong connection method or incorrect connection itself.

If you are convinced that everything is in order, try to follow further instructions one by one and skip steps only if you are 100% sure that you have done this before.

Connecting to a computer: installing drivers

Drivers is software that helps the computer understand how the connected gadget/device works and how to “communicate” with it.

All devices have their own drivers: phones, printers, scanners, etc.

It happens that even when you connect the phone for the first time, the drivers are installed themselves and subsequently updated when necessary. However, if this does not happen, you can complete the installation procedure yourself.

Attention! If you are the owner of a computer running Windows 8/Windows 10, before installing, disable the digital signature of the program, i.e., virus protection, otherwise some processes will be inaccessible to you.

How to install drivers on a computer:

Conduct a search of software sites on the Internet and select the most reliable ones (for example, w3bsit3-dns.com);

In the section with your smartphone model, find two archives: “MediaTek program” and “Qualcomm program” and download them;
Unzip these files in the usual way and place what you get on the system drive (usually drive C) so as not to lose it or accidentally delete it;
Restart the computer (by yourself, if you have not received a notification about the need from the PC itself);

Now try to connect your phone. If it still doesn’t see the computer or you have already installed the drivers, we’ll try to update them.

Driver Update:

Open “Device Manager” on your computer;
Next, open “Portable devices”, where you can find the name of your phone;
Click on the name of your model and open the menu by right-clicking;
Select "Update Driver";

If nothing has changed, move on.

Xiaomi does not see the computer: we debug via USB

A method that is often used to solve connection problems is USB debugging.

USB debugging mode or debugging mode- This is a kind of making changes to the operating system for some specific purposes. Using this function, you can get root rights - user rights, and with them many new features.

Using USB debugging you can:

Identify problems with the phone, which is what we need;
Test the components of the device;
Test the operation of any programs;
Perform a backup copy of data;
Receive more detailed data about the phone and all processes taking place in it;
Restore the device.

As we can see, root rights allow you to do many interesting and useful things.

How to get user rights and perform USB debugging:

Go to “Settings” and then go to “About smartphone” or “About device”;
Find the field where the installed version of MIUI is written and click on it up to 7 times;

If you did everything correctly, a notification about obtaining root rights will appear;
Now go to "Advanced" or "Advanced Settings" and "For Developers";

There, find the “USB Debugging” field and activate it;

Additional ways to connect Xiaomi Redmi to a computer

There are a couple more ways to establish a connection between your phone and PC.

Method one: instructions:

Go to the call menu;
Enter the following combination in it: “*#*#13491#*#*”;
After entering the last character, a dialog box should appear on the screen in which 2 options will be available - select the connection method “MTP”;

As mentioned earlier, this mode allows you to transfer any files from your smartphone to your computer, which is why it is also called multimedia;
Ready!

This method can be applied not only on Xiaomi smartphones, be it Xiaomi Redmi 4x, Redmi 5, 5 plus or Xiaomi Redmi Note 4, but also on any other Android device.

Method two: instructions

For this method, you will need to install the “Android Terminal Emulator” application on your phone, which you can find in PlayMarket;

After downloading, connect the gadget to your computer;
Open the program, enter “su” and confirm your action;
Next, enter “setprop persist.sys.usb.config mtp, adb” and press “Enter”;
Type "Reboot", press "Enter" and wait for the phone to reboot;
Ready! This procedure can also be carried out not only on Xiaomi devices.

How to transfer files via usb

The answer to the question “How to download photos from Xiaomi to a computer” is very simple. You will need to go to phone management, select the memory type: internal or SD card, go there and then perform the necessary operations with files.

Xiaomi: computer program or additional file transfer methods

In addition to applications on the phone, there is also a Xiaomi program that can be downloaded to your computer - Mi PC Suite. Its operation allows you to transfer large amounts of files to your PC, and see your smartphone screen on your computer without using a USB cable. Mi PC Suite functions as a file manager with great capabilities and advanced tools.

Benefits of Mi PC Suite:

Synchronizing your computer with your phone is always successful;
You can backup your data or restore it;
Possibility of firmware update;
Access to external and internal phone memory;
Connection via one network;
Internet access via computer.

You can download the program on the official Xiaomi website. There will be no problems or malfunctions with this version, especially since it is now completely translated into English.

So, how to use the program:

Download it on PC;
Find the “.exe” file in the downloads and double-click on it;
Carry out the installation (on a PC);
After installation, click on the program logo and it will automatically connect to your phone.

Mi PC Suite sections:

“Screenshot” – connection management;
“Back Up Now” or “Manage Back Up” – data backup section;
“Update Now” - allows you to update the gadget without using “Settings”;
“App” - install programs and applications on the phone;
"File Explorer" - exchange files between two phones.

How to connect Xiaomi to a computer? It would seem that it could be simpler - take a USB cable and connect your PC to your smartphone. Usually in such cases, Android devices are detected and connected automatically, but what if this does not happen? There are several ways:

Method #1

When you connect your computer to your smartphone, the latter will display a connection notification, which will disappear after a few seconds. If you don’t have time, open the curtain and click.

A new “Using USB” window will open and here you need to select the file transfer mode.

Method #2

You need to go to your phone settings, then additional > for developers > USB debugging – enable. This may help, but there are times when the “for developers” option is missing. This often happens due to the operation of an antivirus program.

In this case, resetting to factory settings will help you. Be sure to save your data to storage media first, as it will be deleted.

Method No. 3

Another option is to go to the menu on PC Start > Devices and Printers and select the model of your smartphone there (if it appears), for example, Xiaomi Redmi 3. Point the cursor at it and click right click (RMB) > troubleshoot > update driver.

Method No. 4

For this method we need the Android terminal emulator program. It can be downloaded from the play market. After this, we connect the smartphone to the PC and there are 2 options:

If you want to connect your phone as a media device (MTP):

Open a terminal and write su, then click confirm.
We write setprop persist.sys.usb.config mtp,adb and press enter.
Now we write reboot, press enter and the reboot will begin,

To connect in USB mode:

At the second point we enter setprop persist.sys.usb.config mass_storage,adb

This method has helped many owners of Xiaomi Redmi Note 3, Redmi 2, Redmi 3 pro, Mi Max, Redmi 3s phones, so try it, maybe it will solve your problem too.

Every smartphone user sooner or later needs to connect it to a computer via USB. This may be required for various purposes, for example, to install new software on a gadget or to save any files. However, sometimes it is not possible to synchronize your mobile phone with your computer. There can be a great many reasons for this, and they can be both software and mechanical. But the main thing for you and me is not so much to understand the specific reason, but to eliminate it in order to comfortably use the smartphone.

Today we will tell you what to do if the computer “does not see” Xiaomi Redmi 4 pro. This gadget is taken as an example due to its high popularity, and the recommendations given in the article can be successfully applied to connect other models of Xiaomi mobile devices to a PC.

First, let's say a few words about why the phone does not connect to a computer or laptop. The main reasons may be:

Mechanical failure of the USB cord or connector.
Using non-original components to create a connection to a PC.
Lack of the required driver version on the computer.
Incorrect choice of mobile device connection method.
There are system problems on your PC or mobile gadget.

These are just the reasons for the connection problem that lie on the surface. More serious problems are possible, but let's hope that they do not apply to your phone. Well, for the reasons that were listed above, the solutions given below will be quite effective.

Checking the USB cable

Before delving into the settings of your phone and PC, looking for a problem there, make sure that the connection is organized using working components. If you experience difficulty using one cord, we recommend using a different one. If the problem does not go away even then, then you can look for the problem in another area.

Just in case, don’t forget to try connecting your smartphone via different USB ports. It is possible that one of the sockets on the computer does not work, but if you use the other, everything will work out.

Download drivers

Synchronizing your phone with a computer is only possible if the appropriate drivers are installed on the PC. And although most modern operating systems allow you to automatically download the required driver from the Internet upon a new connection, it happens that it is not updated in a timely manner or for some reason is not downloaded at all. As a result, your Redmi Note does not connect.

In order for the system to see the phone correctly, you need to check the drivers for compliance. Well, the easiest way is to manually do them to make sure that you have the correct version installed. Install the downloaded file on your PC and try to connect again. If this time the computer “does not see” the mobile device, then we continue to look for other ways to solve the issue.

Enable debugging mode

To implement this task, you need to obtain developer status. This is done extremely simply: go to settings and click 7-10 times on the column "About the device". Immediately after this, you will see a message notifying you that the appropriate rights have been assigned to you. In practice, this definition means that you can make slightly more individual settings compared to the average user.

We go into the settings and see that an additional item has appeared: "For developers". Click on it and select in the menu that appears again "USB Debugging". All that remains is to turn it on and try connecting to the PC again.

Connect via Terminal

If the methods described above did not help and the phone categorically does not want to be recognized on the PC as a removable storage device, you can try to do this through a third-party application Android terminal emulator. This program allows you to obtain superuser rights, which is very similar to developer rights. In fact, all this allows you to make advanced settings.

First, we write the combination of letters SU in the program, which will give us superuser rights. Next we write a more complex phrase: setprop persist.sys.usb.config mass_storage,adb and press the enter button. This command will allow you to recognize your phone as a drive on your computer. All that remains is to reboot the smartphone by issuing the command Reboot, and connect to PC.

Connecting in camera mode

Sometimes it happens that the phone is recognized on the computer, but only in camera mode. This can be used to your advantage. For example, you can transfer all the necessary files from your computer to the section "Photo", and then, disconnecting from your PC, sort them manually using the file manager on your mobile device. It's simple and accessible to everyone. But remember that this will not eliminate the problem, but will only allow you to bypass it.

This method is suitable if you are short on time and need to connect to your PC urgently. But in the future, one way or another, you will have to figure out how to organize a stable connection.