Reset Android. Hard Reset - Android system recovery

Has your phone become too slow, freezes when loading, or won’t turn on at all? It is necessary to restore the system to factory settings. Resetting Android to factory settings is not as difficult as it may seem at first; in this article we will describe in detail the entire process from A to Z.

Has your phone become too slow, freezes when loading, or won’t turn on at all? It is necessary to restore the system to factory settings. To switch to Recovery mode, you need to turn off the phone and then press the key combination. Each manufacturing company has individual combinations.

The most common is to simultaneously press one - or two - buttons that control the volume level and the “Power” key. The most popular companies use the following combinations:

• “LG” - “Power on” + “Volume up”; after the logo appears, release and press this combination again;
• HTC, Nexus, Xiaomi – “Power on” + “Volume down”;
• Lenovo and Motorola – both buttons responsible for volume + “Power”.

After loading Recovery mode, the user will see system lines with different names. Select the line “wipe_data/factory_reset” and confirm the selected action. The phone will perform an operation for some time to reset new and restore old settings. Upon completion, the owner of the gadget will only have to click the line “Reboot_System_Now”. The phone will first turn off and then reboot with the restored Android system.

The phone must be turned on. To return your Android device to factory settings, go to the general settings section. There we find the “Restore and reset” item, where we select the “Reset settings” action. After this, the system will warn the user about deleting the data and ask you to confirm the operation. After completing the procedure, the phone will reboot and launch the operating system with the old settings.

The owner of the phone must go to the dialing menu and enter a code combination consisting of numbers and symbols. Manufacturers program their products differently, and the codes change over time. Therefore, for each specific model, especially less common ones, it is better to check the code on the Internet.

However, there are a few of the most popular combinations:

• *#*#7780#*#
• *2767*3855#
• *#*#7378423#*#*

After entering one of them, the system will return the phone to its original software state.

How to avoid losing data when resetting Android settings

Restoring default settings will result in the loss of all data stored on the phone. All programs, documents, video and audio files, pictures, passwords and contacts are deleted by the system.

1. Transfer data to micro SD drive. If you purchased an external drive when purchasing your phone, all the necessary information can be copied to it using a file manager. If you do not have a card, you can purchase it immediately before you return the factory settings to your Android smartphone.
2. Data from your phone can be saved by uploading it to the Google Drive application. In essence, this program is an analogue of “cloud” storage. The user can download and store 5 GB of various information, and if he pays extra, this volume can be increased up to 1 TB. The application is installed from the Google Play market.

A little advice: In addition to saving data on a micro card, copy all important information to your computer. In this case, even if something happens to the external drive, the necessary information will remain with you.

If the user of an Android device has forgotten the password that unlocks it, and no recovery methods have worked, they will have to resort to resetting the settings. This can be done, firstly, by using the Recovery menu (the method is described at the beginning of the article).

Or here’s another way to restore factory settings on an Android gadget. So, the phone is turned on, but locked. When the system prompts you to enter your password, ask someone to call your number. During a call, the user has the opportunity to access the settings menu. Without accepting a call, you need to go to this section and select “Reset all data”. We confirm the operation. After restoring the original settings, the password requirement will disappear.

This phone brand is one of the most common, so it’s worth mentioning separately. In particular, for Samsung gadgets, to exit to Recovery you should press (simultaneously): “Power”, “Home” and the volume key “+”. The combination must be held until the menu appears.

If the reset is performed through the settings menu, you should select the “General Settings” section and go to the “Reset” item (it may also be called “Privacy”, “Backup and reset”). At this point, select the action “Reset data” (or “Reset device”). After confirmation, the phone will return the system to its original form.

Typically, resetting your settings will require you to re-enter your Google account password. Don't remember this information? There are several ways to solve the problem. The simplest one is as follows.

After you have reset the settings on your Android phone, turn it on. Let's connect to the Internet. When filling out your Google account, write and select any few letters in your email field. A menu will appear above them, offering a choice of one of the actions: select, copy or send. Select “Send”. We indicate “SMS/MMS” as the program that will do all this. In the addressee line we indicate “112”, and in the message we enter a few letters of any kind. After sending, the system will send an SMS indicating that our letter was not delivered. This is what is required. You should go into this SMS message and press the “Call” button located next to the recipient’s number. This action should take the user to the contacts and dialing menu, where you need to erase “112” and dial the code: “*#*#4636#*#*”. The system will display a menu of several items. We choose the second one (something related to statistics). This will move the user to the settings menu, where a new function will appear in the “Reset and Recovery” item - resetting data with deleting the Google account.

Android is a modern operating system that powers 70% of tablets. However, users periodically need to restart Android. And if the usual turning off and on of the device does not cause any difficulties, then special reboot methods are sometimes inaccessible to the average user. The fact is that such information is not indicated in the instruction manual. In addition, Chinese devices are common today, the accompanying documentation is written in hieroglyphs.

Why do you need to restart your smartphone or tablet?

There are several ways to reboot:

• regular;
• hard (reset to factory settings);

A simple reboot is usually used to free up the gadget’s RAM, which is gradually becoming clogged with third-party programs. This problem is especially common in devices running Android 4.3 and earlier versions. A regular reboot is also used when short-term problems occur caused by software malfunctions. To reboot the device, you need to hold down the power button and select “Reboot” in the window that appears. If the device is frozen, a forced reboot will help, which is carried out by simultaneously pressing the power, volume and Home buttons.

If a regular reboot does not help to cope with the slow operation of your smartphone or tablet, you should use a factory reset. However, you need to keep in mind that all installed applications will be deleted, so before performing the procedure, it is advisable to make a backup copy of the software using a standard tool from Google or a third-party program (for example, Titanium Backup). To completely reset the device you need to:

1. Turn off the device completely.
2. Press and hold the Home button until a slightly modified Android logo appears - a green robot with an open lid on its stomach and an exclamation mark.
3. The device will boot and all settings on it will be reset to factory settings.

This method does not work on all devices. Many manufacturers provide a factory reset and allow users to perform this procedure using a menu.

On stock Android (without third-party add-ons), you can reboot the device in a simpler way:

1. With the OS turned on, hold down the power button.
2. In the menu that appears, hold your finger on the “Turn off power” item for a long time.
3. Agree to enter safe mode.

If none of the above methods work on your device, you can reset the settings via Recovery.

Reboot into Recovery

Recovery is a kind of analogue of the BIOS interface used on mobile devices. With its help, you can perform a complete reset of the system settings, delete all data on the memory card or the device itself, install unofficial firmware and much more.

The most commonly used Recovery systems are:

1. TWRP. It has a nice interface, supports touch control, and has wide functionality.
2. CWM. It has almost the same set of functions, but does not support touchpad controls. But CWM has better compatibility than TWRP, so it is used in more devices.

The procedure for logging into Recovery depends not on its version, but on the phone or tablet model. Thus, in smartphones from Samsung, you need to hold down the central mechanical key along with the power and volume up buttons. For Nexus series models, you need to hold the volume down and the power key and select Recovery.

For tablets based on MTK processors, there is a utility called Mobileuncle Tools. With its help, you can enter Recovery by simply selecting “Boot into Recovery”. In addition, this program allows you to configure important parameters of the device, including turning off unused mobile frequencies and adjusting processor operating modes.

There is also universal software that works on almost all devices. The Fast Reboot program has become widespread. It allows you to instantly perform a so-called virtual reboot - restarting all system services without disrupting the functioning of the operating system.

This feature is usually used to quickly clear RAM or to eliminate errors associated with incorrect operation of third-party software.

Hard reset on Android, aka Hard Reset ( Hard Reset), is a hard reset of the device, also called a “hard reset”.

This is a complete reboot of the device, after which all system settings are reset by default, programs that were installed are deleted, and all system information, SMS and contacts are erased. Information erased in the process android hard reset It will no longer be possible to restore it back, so it is recommended to make a backup copy before performing a full reset. However, the memory card and SIM card data remain safe and sound.

It’s one thing if a smartphone user decides to do a hard reset to restore factory settings, but there is also such a thing as a spontaneous hard reboot, which occurs due to a conflict of installed applications, or simply due to a normal system failure.

Why do you need a hard reset Android?

It's simple, modern devices running Android OS have a fairly large number of applications that can fail from time to time. But any Android phone has a hidden area where system files are stored.

If you just want to return the phone to standard settings, then a hard reset is done as follows:

1. Launch the phone menu.

2. Go to settings.

3. We are looking for the “Built-in memory” section there.

4. Feel free to select "Reset to factory settings/settings".

Sometimes users themselves set the wrong settings, which lead to the smartphone freezing. Or a standard situation, for example, you set a graphic password but forgot it. What to do? And here the manufacturer has provided for everything. There is a certain combination of keystrokes that, when executed, restores the smartphone to its default settings. Same as when purchasing.

Actually, how to do a hard reset if the phone is frozen

In order to return the phone to the original system settings, if you cannot open the menu, you must first open Android system recovery, which is opened using certain key combinations provided by the manufacturer. Depending on the smartphone model, you have to select keyboard shortcuts.

1. Turn off the smartphone.

2. Press the top volume + power key at the same time and hold.

3. After the Recovery menu opens, select Wipe data/factory reset. (menu navigation is carried out with the volume keys, selection with the power key).

4. Find Yes - delete all user data (yes, delete all user data).

5. After completing the uninstallation procedure, click Reboot (or Restart).

That's all, your Android smartphone is again ready to serve you faithfully!

Attention!!! You perform all actions at your own peril and risk!

Imagine the situation: something happened to the user’s tablet or smartphone, as a result of which it ceases to function normally. The user goes to a forum or social network and asks what to do. They answer him - do a hard reset. What does it mean?

Hard Reset is translated from English as “hard reboot” or “hard reset”. As you can see, these are two different concepts, which, nevertheless, can be called one term. In the first case, Hard Reset means rebooting the device if the device is frozen. When frozen, you usually need to hold down the POWER key until the device turns off and turns on again. In the case of an iPhone, to force a reboot you need to hold down two physical keys at the same time, which is what our website is about.

In the second case, we are talking about resetting (returning) the settings to factory settings. In other words, all data is completely deleted from the gadget’s memory and you receive a smartphone or tablet as if purchased out of the box - without photos, songs, videos, applications, etc. Restoring to factory settings can be useful if, for example, you want to completely clear the device’s memory, including deleting all applications, or if your smartphone or tablet starts working differently than before - it slows down, glitches, etc. In this case, resetting to factory settings can really help.

You can reset the settings directly from the device menu. This item is called “Reset settings”.

When you reset the settings, you can also clear the memory card.

Our site has already talked about how to properly do a Hard Reset on an Android-based device.

Resetting your phone to its factory state can be useful not only for... Returning to the original settings will also be useful in case of general slowdown of the smartphone, complete transformation of the handset into a “brick,” “lost” of the unlock password, or encountering unstable operation due to various reasons. No matter how unpleasant the situation may be, it is useful to know how to perform a hard reset specifically on your smartphone.

In this article, you will learn about the consequences of hard resetting your phone, as well as how to do it using tips from the excellent Hard Reset online guide.

What is it

Hard Reset - a hard reboot of the phone, during which the system is rolled back to factory settings and a complete system cleanup is performed. The “knife” includes contact lists, SMS correspondence history, search queries, installed applications, files downloaded to the phone’s internal memory, as well as all passwords and logins. In this case, the information is permanently deleted. Therefore, do not forget to make a backup copy of your important data and transfer photos and videos to a memory card - resetting it will not affect the information from the operator's SIM card.

How to do

The easiest way to do a hard reboot is to find the appropriate option in your phone settings. A couple of taps, enter the security code - the process is started.

There is an alternative option: reset by pressing a key combination. Which ones exactly? Individually for each smartphone manufacturer. What to do? Stomp towards hardreset.info. The web service contains instructions for activating a hard reset for a huge number of handsets from unimaginable manufacturers. I'm serious, it's worth checking out hardreset.info just for fun.

In addition, hardreset.info provides instructions for regular phones, such ancient ones, with buttons.

The reset procedure itself requires minimal effort from the user. It is enough to follow the guide's recommendations. Some phones have multiple hard reset instructions, including video.

Conclusion

If you still cannot find your phone model, refer to the instructions from the same manufacturer or the same line of handsets, it will most likely work. Although this is unlikely to happen - there are more than a thousand Samsung phones alone. Oh yes, iPhones of all ages are present.

Have you ever had to perform a Hard Reset? Didn't your hands shake?