Home-Programs-Bootable flash drive windows 7 usb what format. Creating a bootable USB flash drive to install Windows

Bootable flash drive windows 7 usb what format. Creating a bootable USB flash drive to install Windows

Large number modern models laptops are produced without optical drive. Under such conditions, the boot windows flash drive 7 becomes the main method and most used installation tool operating system.

To create a bootable Windows USB flash drive, you must have:

  1. ISO image of the operating system;
  2. Removable media with a capacity of 4 GB;
  3. A motherboard that supports booting from a flash drive.

Important Note: The drive should be connected via USB interface 2.0. Windows 7 does not support USB 3.0 (it is usually colored blue inside) during installation, and therefore, when trying to boot through this interface, the user will see an error message.

Preparation programs bootable flash drive Windows 7 can be distributed either for free or for a significant amount. Usage free software V in this case absolutely justified - the utility will cope with its functions perfectly, and you will solve all your problems without spending anything but time.

Let's take a closer look at how to make a bootable Windows 7 flash drive using utilities specially designed for this.

Important Note: Some programs require the user to have administrator rights to perform tasks. To get them, just click on the utility shortcut right click and select "Run as administrator"

UltraISO program

The program has a Russian interface, which is very important - you will not just press buttons sequentially, relying on your knowledge of English, but you can thoroughly understand which process is launched after the next action with the utility.

Any user can create a bootable Windows 7 USB flash drive using the ultraiso program. You just need to follow the simple step-by-step instructions:

Run the program as administrator. Load the operating system image into the window that appears. It can be written in ISO format, MDF or NRG. Using the Open button or a similar item in the File menu, add it to the application work area.

The next step in creating a bootable Windows 7 flash drive is writing the image to disk. This is done by clicking on the corresponding item in the “Boot” menu.

The recording window will appear. Check that the Disk Drive line contains the name of your flash drive and its letter. The recording method should look like USB-HDD+. If all parameters are specified correctly, click the “Record” button.

A warning will appear on the screen stating that all data on the removable media will be destroyed. Continue the process of writing a bootable Windows 7 USB flash drive by confirming your intention by clicking Yes.

UNetBootin program

The main window of the program looks quite ascetic. Here you need to select Disk Image, the letter that is assigned to the removable media. The ISO image address is specified manually. After adding the image, files are extracted and copied to the flash drive.

Other programs for preparing a bootable Windows 7 flash drive work similarly, such as USB/DVD Download Tool, Rufus, the operation of which will be described below, etc.

Creating a bootable USB flash drive for Windows 7 is not enough - the image recorded on it still needs to be opened somehow. If the system continues to work, then this should not cause any problems. However, if nothing starts already, you will have to go into BIOS settings.

Important note: Depending on the year of manufacture BIOS version there are different ones. They also differ in appearance, but the names of menu items remain virtually unchanged.

Opening the BIOS by pressing the Del, F2 or other key specified in start window download, you need to go to Advanced tab BIOS Features. Here the devices are placed in the order they were launched. Simply put, first the system, for example, loads a CDROM, then hard drive, then USB-HDD.

Since we made a bootable Windows 7 flash drive, and now we want to launch it, we should put booting the USB-HDD first. To do this, press the Enter key on the first line to open a menu in which all connected devices are presented. Then select USB-HDD from the list provided. In second place, put the download from hard drive(HDD), let CDROM remain in third position.

Possible problems with loading media through BIOS:

  • The motherboard simply doesn't support booting from external storage(if it was developed before 2003, this is a very real reason);
  • Incorrect bootable windows 7 usb flash drive. Perhaps mistakes were made during its creation. To rule out this option, test the media on another computer where motherboard accurately supports reading removable disks;
  • The USB controller is disabled in the BIOS.

If you are installing the system on a computer, it is recommended to immediately connect the drive through the port located directly on the motherboard, bypassing the connectors located on the front panel of the system unit.

If the UEFI interface is installed

UEFI is replacing the traditional BIOS - new interface, which copes better with modern hardware. Essentially, UEFI performs the same functions as BIOS, providing a pre-boot environment for the OS.

However, creating a bootable Windows 7 uefi USB flash drive is somewhat different from the usual procedure for preparing installation removable media.

There are two ways:

  • Use of software;
  • Manual drive setup.

Let's consider each option in detail.

Rufus program

Why this particular utility? It has several advantages, among which are free, portable, high speed work, user-friendly interface and support for the Russian language.

Note: the algorithm of actions indicated above is also suitable for creating installation media with Windows 8.

The main program window looks like this:

As you can see, there is nothing complicated here. All fields are very clear and are usually filled in automatically. But so that the question of how to make a bootable Windows 7 flash drive using this program is studied thoroughly, let’s briefly go through the points presented in the main window:

  • The device is your flash drive onto which you plan to write the operating system image;
  • Partition scheme - leave GPT with UEFI by default;
  • The file system and cluster size are also set automatically. They should not be changed;
  • The Create bootable disk field allows you to select the path to the ISO image.

After specifying and checking all the parameters, all that remains is to click Start, starting the process of copying files. The recording speed is approximately comparable to the speed of regular copying of information to removable media.

Considering that the program creates a bootable USB flash drive, a higher figure is simply impossible.

Manual setting

If you don’t want to download Rufus or for some reason creating a bootable Windows 7 flash drive does not happen or ends with an error, they will come to the rescue internal tools Windows.

Important note: the steps described are for 64-bit versions of Windows 7, 8 and 8.1. Users with 32-bit version are recommended to use software method entries listed above.

Run Command Prompt as Administrator. You can do this using context menu called by right-clicking on a shortcut command line V standard programs Windows.

Enter following lines in the window that appears:

  • diskpart;
  • list disk.

A list of connected drives will appear. Find your flash drive (you can do this by its size). Look at the number she identified - you will need it for further work with the carrier. For example, let's take number 6 (it may be different for you).

So, the order is as follows:

  1. Select disk 6 – select a specific disk with which all further manipulations will be performed;
  2. Clean – the media is cleared of data written to it;
  3. Create partition primary – a partition is created;
  4. Format fs=fat32 quick – the created partition is formatted into the FAT32 file system;
  5. Active – the section is marked as active;
  6. Assign – assigns a name or connection point;
  7. List volume – check the correctness of your actions. Pay attention to the letter that is assigned to your carrier. Remember it;
  8. Exit – exit from Diskpart.

For clarity, look at the picture - there is nothing complicated here.

After preliminary preparation All that remains is to copy the contents of the image to the media.

Since we are making a bootable USB flash drive for Windows 7, we will have to use additional software to open the image (in the eighth version of Windows, you can mount the image directly in the system). It's good if the program is installed on your computer Daemon Tools. With its help, you can mount the image into a virtual drive, go into it and copy all the contents to a flash drive.

If you don't have Daemon Tools, you can use functionality WinRAR or 7Zip archivers. To do this, you need to open the ISO image through these programs, and then unpack it directly to removable disk.

Conclusion

The process of burning an operating system image to a removable disk is not as complicated as it sometimes seems to novice users. The easiest option is to use Russified software, which automatically carries out all preparatory activities. As a result, the ISO image of the bootable Windows 7 flash drive can only be written directly to an external drive.

Most users have problems already at the installation stage, when they have to configure the BIOS or solve some other issues with launching the installation removable media. However, if all of the above steps are performed consistently and correctly, then installing Windows 7 from a flash drive should be successful.

Windows 7 remains the most popular operating system in the world to this day. Many users are not accepting the new flat Windows design, which appeared in the eighth version, remain faithful to the old, but still relevant operating system. And if you decide to install Windows 7 on your computer yourself, the first thing you need is bootable media. That is why today the question will be devoted to how to create a bootable USB flash drive with Windows 7.

To create bootable USB media with Windows 7 we will turn to the help itself popular program for these purposes - UltraISO. This tool can boast rich functionality, allowing you to create and mount images, burn files to disk, copy images from disks, create bootable media, and much more. Creating a bootable USB flash drive for Windows 7 using UltraISO will be very simple.

How to create a bootable USB flash drive with Windows 7 in UltraISO?

Please note that this the method will work to create a bootable USB flash drive not only with Windows 7, but also for other versions of this operating system. Those. you can write any Windows to a flash drive via UltraISO program

1. First of all, if you do not have the UltraISO program, you will need to install it on your computer.

2. Run the UltraISO program and connect the flash drive on which the operating system distribution will be written to the computer.

3. Click on the button in the upper left corner "File" and select "Open" . In the explorer that appears, specify the path to the image with the distribution of your operating system.

4. Go to the menu in the program “Boot” – “Record” image of a tough disk" .

Please note that you will then need to provide administrator access. If your account does not have access to administrator rights, then further actions will not be available to you.

5. Before you begin the recording process, the removable media must be formatted and cleared of all previous information. To do this you need to click on the button "Format" .

6. When formatting is complete, you can begin the process of burning the image to a USB drive. To do this, click on the button "Record" .

7. The process of forming a bootable USB drive will begin, which will last for several minutes. Once the recording process is completed, a message will appear on the screen "Recording complete" .

As you can see, the process of creating a bootable USB flash drive in UltraISO is incredibly simple. From this point on, you can proceed directly to the installation of the operating system itself.

Hello friends! Today we’ll talk again about creating a bootable USB flash drive.

How to create bootable usb device? For what purposes should I use it and what program should I use to record it?

A brief overview of the five most popular and free programs to create a bootable USB flash drive.

Modern developments do not stand still, and yesterday's technologies are slowly but surely losing their relevance. So the once popular CDs and DVDs no longer seem like such a clear solution for storing, transferring and working with information. High speed data reading, versatility and reusability are just a small part of all the advantages of a flash drive as a bootable medium over disks. Today almost everything personal computers and laptops, if they are less than ten years old, support the ability to boot from USB devices. And in some cases (for example, a netbook), a flash drive may be the only boot device from an external drive.

By the way, the new Windows 10 operating system will be the first axis, the distribution of which will be officially distributed on a USB drive. And if you suddenly need to recover files from a flash drive, read about it. I also recommend paying attention to, which will help you take your mind off everyday work and lift your spirits.

By using additional software A flash drive can be used not only as a boot device for installing, reinstalling and restoring the operating system, but also to create an emergency device (Multiboot). This is a kind of resuscitator, a tool from which you can boot at any time and cure your computer of viruses, restore system files or save important data. I described how to create such a flash drive-reanimator in the article “Creating boot Live CD/DVD/USB devices and its application." You can read this article.

Despite all the obvious advantages and the growing popularity of a flash drive as a bootable device, there are not so many programs for creating it. Nevertheless, they exist, and today I will introduce you to them in more detail, but first a few words about the preparatory stage.

Preparing a flash drive

We will need the flash drive itself, plus knowledge of some important aspects. First, you need to make sure that your computer supports booting from USB devices. There is a misconception that if in bios ( boot section) there is no option to select boot from usb (only floppi, hdd and dvd-rom options are present), then boot from usb is not supported. This is wrong!

More precisely, this is not always the case. Only right decision- refer to the manual (user manual) of your motherboard or using specialized software (as an option - AIDA64) to obtain a detailed report on the hardware used.

The second point is the size of the flash drive. Here everything will depend on what we write on it. For example, to create a Live-USB, installation Linux disk or Windows 7, a 4 GB flash drive is enough. To create a bootable device with the latest versions of Windows, it is advisable to have a flash drive of at least 8 GB on hand.

The third point is transferring files from a flash drive. Typically, the process of creating a boot device involves full formatting. If there is a flash drive important files, transfer them to another device in advance. To create a bootable USB flash drive and then work with it as a boot device, use USB port-2.0 (Windows 7 does not support USB 3.0).

How to create a bootable USB flash drive

Let's consider five in various ways using the example of five free programs for Windows.


A small but quite functional utility with the self-explanatory name WinSetupFromUSB. Equally well suited for recording a bootable and/or multiboot flash drive (up to 10 operating systems) and creating Live devices. Official website.

Among the shortcomings is the lack of support for the Russian language. Among the advantages, as I already said, is its versatility. The utility can work not only with Windows distribution, but also suitable for recording installation disk with Linux.

The usual option for creating a bootable flash drive, for example, with a Windows distribution, involves selecting the flash drive itself, the option to automatically format the media, and the ISO image of the operating system in the appropriate boxes. The recording process starts after pressing the “Go” button. You can read more about how this program works.

To create a multiboot flash drive (several OS), you need to specify the path to the ISO images of the operating systems. Paragraph Windows selection 10 at the time of writing this article is not available by default, but in reality everything is written and works, you just need to select the appropriate column with the available versions - Vista, 7, 8.

2. Rufus

Perhaps the simplest solution for creating bootable USB drives. Everything is simple and intuitive. Suitable for working on systems that do not have an installed OS. Official website rufus.akeo.ie.

The main advantages are speed of operation, simple interface, Russian language. Great solution, if there is a need to create a bootable Windows 10 USB flash drive with UEFI support. By the way, I wrote in detail about how to do this in.

Distributed in the format of a regular installer and portable version. To create a bootable USB flash drive, in the utility window you need to specify the path to the ISO image to be written and click the “Start” button.

On new systems that use UEFI instead of BIOS, in the "Partition Scheme and Type" menu system interface» set the value to "GPT for computers with UEFI".
In other cases, the default settings will be sufficient. The option to format a flash drive is assigned by default.

3. Windows 7 USB/DVD Download Tool

This utility is official app from Microsoft. The interface is minimalistic, simple and clear, it is easy to work with. Download from the official website wudt.codeplex.com.

Perhaps the name of the utility (Windows 7 USB) will mislead many people into thinking that with its help you can only write the Windows 7 distribution to removable media. However, this is not the case. In addition to the seventh version, Windows 8.1 and 10 distributions can be stored on a flash drive.

The downside is that the utility is not Russified, but the simple and intuitive interface is designed to offset this drawback.

All that is required from the user is to insert a USB drive in advance, select an ISO image with the operating system and specify the path to the media (flash drive) to which this image should be deployed.

The operating principle of this program is based on standard tools operating room Windows systems- this is “diskpart”, “bootsect /nt60”, ISO unboxing to a flash drive. The program acts only as a graphical interface.

UltraISO is one of the best and most functional programs for working with disk images. A universal “harvester” that supports work with almost any known formats. Can work in tandem with Nero Burning Rum and integrates with virtual emulators. It will help if the boot disk image is not in ISO format.

The program can convert other image formats into ISO files - NRG, MDF, MDS, IMG, CCD, etc. With UltraISO you can edit ISO files without unpacking them. The UltraISO interface has been translated into many languages, including Russian. For downloading, you are offered several editions of UltraISO, adapted for individual versions of Windows, as well as portable option programs. Download link www.ezbsystems.com.

By by and large the program does not care what boot devices will be created with its help, with what operating system, what software and from what manufacturer. The ISO image to be burned must be opened in the program window either using the Open command in the File menu or using the browse button on the toolbar. This can also be done using a combination Ctrl keys+ O.

Then in the window that appears, if the program automatically selects required flash drive, click the “Record” button.

Daemon Tools Ultra- This professional tool for working with images. The program itself is familiar to many users free version Lite, which allows you to mount virtual drives for reading disk images. Its more functional version- Daemon Tools Ultra - among other features, offers the creation boot devices.

Among the disadvantages, it is worth noting that it is paid, but to create a bootable flash drive, you can download a free 20-day trial version on the program’s official website. Official website of the program.

Go to the official website and download the program. During installation, you must select a trial license type.

The program works with a huge number of disk image formats and can be used both to create a boot device with subsequent installation of the operating system, and to restore it (Live disk).

To create a bootable flash drive, in the main window of Daemon Tools Ultra, select the “Tools” menu item, and among its commands is “Burn boot image to USB". Or the hotkey combination Ctrl+B.

In the recording parameters window, specify the path to the image, enable the MBR rewrite option and click “Start”.

When the flash drive is ready, all that remains is to boot from it. The easiest way is to use the boot menu keys. The table below shows clear example such keys.

Of course, this is not the entire list of programs designed to create bootable devices, but for the vast majority of users, the capabilities and functionality of the listed software will be sufficient.

For example, the Rufus program can be used as the simplest and quick tool to create Bootable USB drive with one Windows distribution or for BIOS firmware from under DOS.

Cast aside doubts, believe in your abilities, making a bootable USB flash drive for Windows 7, 8.1 or 10 is as easy as shelling pears, and you will definitely be convinced of this. There are several ways to create a bootable USB flash drive from iso, using different programs- simple and smart, humpbacked and crooked, which one to choose is up to you.

In this article I will try to show you a fairly simple method with 100% efficiency. Whether you like it or not, soon the world of optical drives will sink into oblivion and will never return; everyone will have to learn how to create a bootable flash drive, without exception, and in my opinion it is better to do this before than after the OS crash. A thousand-times proven boot program will help you realize your need. Rufus flash drives USB

How to make a bootable USB flash drive for Windows 7-8.1 correctly - detailed instructions.

So, correct creation A bootable flash drive 7, 8.1 will require the following from you. Flash drive with a capacity from 4GB to 8GB (depending on the size of the iso image). Next you will need good ISO image of the operating system, and note that it’s not a shmurdyak rebuilt by someone unknown, with a set outdated programs, and 100% working official version Windows 7 or 8.1 (whatever you prefer). It is this image that will save you from surprises, ensure error-free operation and DirectX update, drivers, etc., will allow you to make a high-quality bootable USB flash drive 7, 8.1.

For those who have problems with the image Windows iso– the disk is scratched, broken DVD drive, is missing from the laptop initially, too lazy to create an image, etc., I suggest using the largest Russian-language torrent tracker and filling this gap. Win 7 and Win 8.1 images are based on official releases Microsoft, with a small addition useful feature- for example, Win image 7 contains all 32-bit and 64-bit versions from Starter to Ultimate, which you will agree is very convenient.

The second thing we really need is a program for creating a bootable Rufus flash drive. No installation required, just download and run. To avoid any surprises, the name of the folder with the program, the folder with the image and the path to them should not contain Russian letters, use the Latin alphabet - English.

Next to the Rufus program folder, create another one with the intuitive name Windows-7 or Win-8. Opening file manager Total Commander(if you don’t know what this is, it’s time to learn how to operate files correctly) or an archiver WinRAR– unpack the archive with the program, transfer it Windows image from the downloads folder to the created folders.

It remains to voice the last cautionary phase - the transfer and preservation of information important to you from USB Flash hard disk drive. The first step in the process of creating a bootable Windows 7 USB flash drive will be formatting - cleaning and repartitioning the media.

Step one. We turn our attention to the desktop, double click Launch the “Computer” shortcut and right-click on the flash drive shortcut. In the menu that opens, left-click on “format”, then what to select and where to click is shown in the picture. We are waiting for completion, the preparatory process is complete, we are 100% ready to make a bootable Windows 7 USB flash drive correctly and the first time.

1. Open the folder with Rufus program– launch it, in the program window that opens, find “Device” and point to the flash drive, if it’s not picked up automatically.

2. The next item is “Partition scheme”, select “MBR for computers with BIOS or UEFI”. If you need to install an operating system on a hard drive with a capacity of more than 2000GB, use “GPT for computers with UEFI”.

3. “File system” - FAT32 can be used with images smaller than 4GB, images larger than 4GB require the use of the file system - NTFS.

4. We leave this item unchanged, the default “Cluster size” is 4096 bytes.

5. “ISO image” - click on the icon optical drive, in Explorer, select the iso image of the required system.

6. Raise your gaze a little higher, set a name that is clear to you for the “new volume label” - in English letters, Win-7 - for example.

7. We check the correctness of the choice and next action we command Rufus to make a bootable USB flash drive 7, press the “Start” button. The program will issue a warning in Russian, click “OK” and leave the computer alone.

We take our playful hands and carry them to the kitchen, by force of will we force them to pour tea or coffee - we slowly enjoy the drink. This is a simple precaution; by not doing so, you will ensure the continuous creation of a bootable Windows flash drive; you will not be able to cause an error, overload the processor, stupefy the file subsystem, etc.

Depending on speed characteristics your PC, after 5-15 minutes you will see the inscription - 8 “Ready” - the bootable flash drive has been created, press nine - “Close”.

That’s actually the whole science, how to make an image of a bootable flash drive - you now know. As you can see, nothing extremely complicated or impossible, the main thing in this matter is to maintain a sequence of actions and you will definitely succeed.

How to make a flash drive bootable inBIOS.
For successful Windows installations from a flash drive, there is only one question left to answer - how to make a flash drive boot disk in BIOS? The question is important, because starting the installation differs from your usual order, with DVD disc, which leads to a common mistake and a surprised look.

For those who missed it, let me remind you that in the process of creating a flash drive, we selected the USB-HDD option. The bootable flash drive is recognized exactly as we called it, so look for the usual DVD activation in the BIOS section - First Boot Device- No need.

We place installation flash drive into a free USB 2.0 connector, wait until the PC picks it up, then reboot. During the system boot process, press Delete or F2 and enter the BIOS. Depending on the BIOS version, the name of the required Boot sector may differ, but the principle of operation will be the same. Open " Advanced BIOS Features".

Next, click on the “BootSeq & FloppySetup” section, find “Hard Disk Boot Priority”, go in and see the list of drives installed in your PC. Your bootable flash drive should be in the last place of honor - this is what needs to be corrected. To make a flash drive a boot disk, we need to move it to the top of the list - using the keyboard arrows (up and down), select flash drive. Next, use the “+” keys and press until the installation flash drive becomes the first in the list. We complete the manipulations in the BIOS by pressing the “F10” (save) button.

In order to make the flash drive bootable in BIOS - UEFI, we still find the same Boot sector– Loading, “Fixed” opens before us Boot Order" and the sea "Boot Option" under it is the setting of the system boot sequence. We look at “Boot Option #1” - as a rule, the hard drive or SSD is located there, the system queries it first and the operating system starts loading from there. Click on “Boot Option #1”, find and select the inscription “USB Key:” with the name of your flash drive.

We press “F10” - the installation of Windows 7 from the flash drive has begun, then we wait for the first reboot, go into the BIOS, return the hard drive to first place, and save. After the reboot, the installation will continue, if you missed this moment, refuse reinstallation, The PC will start to reboot, go to the BIOS - return the HDD to its place.

How to make the image of a bootable flash drive active in the BIOS - and now you know this. The likelihood that you won’t succeed is practically zero - and these are not just words - this has already been proven by more than tens of thousands of users. A little attention plus a sequence of actions - nothing more is required from you. No. 2 - .

Before installing the OS, I advise you to take a look at - I’m sure you’ll find something interesting for yourself. Well, after successfully installing the operating system, do not forget to tell your friends how to make a bootable Windows 7 USB flash drive correctly - it will be useful for everyone. Good luck!

Best wishes
Denker.

Once again, when installing and reinstalling the system, many are faced with the question: “How to create an installation flash drive with Windows 7?” Today this topic is very relevant, since many laptop models are not equipped with a DVD drive, and netbooks do not have them at all.

We'll start by preparing the flash drive itself. During the recording process, it will be formatted, so you need to take care of transferring the existing data to safe place. The minimum size of a flash drive is 4 GB. Next important point– find out whether the motherboard installed on your computer supports booting the operating system from a flash drive. If so, you will need to change the BIOS settings, setting the appropriate boot priority.

Please note: if your netbook, computer or laptop is equipped USB ports 2.0 and USB 3.0, use the USB 2.0 port to connect the flash drive. Otherwise, Windows 7 installation will fail. Windows 7 does not provide USB support 3.0.

Bootable and installation USB flash drive with Windows 7 using the UnetBootin program

Download UnetBootin; working with the program does not require installation. To start, select Download for Windows.

In the window that opens, check the ISO image option and select the media.

After the image is found, click open.

We check if everything indicated is correct, click “OK”.

The process of downloading, extracting and copying files will take some time.

Bootable USB flash drive is ready!

Creating a boot-installation flash drive using UltraISO

UltraISO is not free, but you can use it trial period– Free Trial.

Download the program, selecting the Russian language, launch it as an administrator and select a trial period.

After starting the program we will see the following picture.

In the taskbar menu, select “File” → “Open”. Specify the path of the iso image.

After the image is found, click “Open”.

On at this stage insert the flash drive into the computer. In the taskbar, select the “Boot” menu → “Burn hard disk image.”

Before recording the image, you need to format the flash drive.

Select the file system type.

Once the formatting process is completed, click “Burn”.

We are waiting for the recording to finish.


Burning Windows 7 OS to a flash drive is complete!

Creating a bootable USB flash drive using WinSetupFromUSB

The WinSetupFromUSB program can be downloaded from the manufacturer's official website. Select WinSetupFromUSB-1-3.exe.

Extract the program files to a folder. If you are going to install 64-bit Windows 7, run the WinSetupFromUSB_1-3_x64.exe file.

In the program window that opens, the first column already contains the name of our connected flash drive. You must check the Vista/7/8/Server 2008/2012 based ISO box. Clicking on the three dots right side, open the explorer window.

Specify the path to the ISO image and click “Open”.

After clicking the “GO” button, the process of creating a bootable USB flash drive will start.

The process completed successfully.

Creating a bootable USB flash drive using Rufus

Download latest version programs.


This program works without installation, just run it. In the window that opens, in the “Device” column, select the letter of our flash drive. The choice of system interface partition scheme depends on your BIOS version. Most often, for a regular BIOS, the item “MBR for computers with BIOS or UEFI” is used. The second and third points are intended for installing a system with a UEFI BIOS with transformation of hard disk in GPT.

In the case of creating a regular bootable flash drive, not UEFI, a file one is used NTFS system. The cluster size remains unchanged. For ISO selection Windows image 7 click on the DVD ROM icon.



Related publications: