Home-Windows-How to remove the password if you forgot on Windows 7. After performing this operation, you must

How to remove the password if you forgot on Windows 7. After performing this operation, you must

Working every day at a personal computer, we remember and enter dozens of passwords. These could be codes for games or a mailbox, logging into the OS and many other data that you need to keep in mind. If you went on vacation, and when you returned a month later, you suddenly discovered that you forgot the password for your computer, then this article is for you. So, you have Windows 7 installed on your PC. How do you reset your administrator password?

Safety

First of all, think about how well you understand computers. If all you can do is start your PC and open a browser/solitaire game, then believe me, it’s better not to get into the weeds and leave the matter to the professionals. Any damage you cause to your computer or laptop will automatically void its warranty, and in the event of a more serious breakdown, you may well be denied free service. Also keep in mind that if you are going to hack into someone else’s computer, this is a criminal offense, so everything you do is at your own peril and risk.

The simplest method

Let's say you have one running on Windows 7. How to reset the administrator password? In some cases, the following option helps. You need to disconnect your PC from the network. Then you should unscrew the cover of the system unit. On the motherboard you need to find the coin-cell battery and remove it for a few seconds, and then put it back. What will this give? Many temporary settings of the personal computer, such as time and date, will be reset. Internet, BIOS and user account passwords may disappear. Unfortunately, this method does not always work, and physical penetration into the depths of the computer is 100% the option that will void the warranty.

Installation disk

If the previous method did not help you or you decided not to use it, then the installation disk with the operating system will help you reset the Windows 7 administrator password on your laptop. The fact is that, according to Microsoft's logic, if you have such a disk, then you are a programmer. Therefore, you will have advanced management rights. So, there are two ways for Windows 7. How to reset the administrator password? Read on.

In any Windows operating system, especially on home computers, there is a hidden administrator entry that does not have a password by default. Our task is to connect to it and from there edit other “accounts” and passwords for them. The first way could be like this.

  1. We insert the installation disk into the computer, and when you turn it on, go to the OS installation.
  2. On the very first screen, press the combination Shift+F10 to enable the command line.
  3. We launch the registry with the regedit command.
  4. In the HKEY_LOCAL_MACHINE section, select the "Unload hive" item from the menu and specify the path to the SAM file - /Windows/System32/config. We enter any name of the branch being created.
  5. In the “hive” that appears, we find SAM/Domains/Account/Users/000001F4. We need to fix the F key.
  6. Double-click on it, and a table of memory cells will open in front of us. In line 0038, in the first column, you need to change the value 11 -> 10.
  7. Without touching anything else, we exit and save.
  8. Select our “hive” in the HKEY_LOCAL_MACHINE branch and select “file” - “unload hive”. We confirm.

You can now restart your computer by removing the installation disk first. You should have an administrator account, by logging into which you will be able to edit any passwords on your accounts.

Cunning

This is the second way to “hack” Windows 7. How to reset the administrator password with the installation disk in hand? To do this, we repeat the first two points described in the previous method. But instead of logging into the registry, we do the following.

  1. We hope you remember which drive you have your operating system installed on. If not, enter the command "dir C:\". A table with folders on the disk will appear in front of you. If you see Windows among them, then this is what we need.
  2. Now we need to copy the file - "copy C:\windows\system32\sethc.exe C:\".
  3. Instead, create another one that opens the command line - “copy C:\windows\system32\cmd.exe C:\windows\system32\sethc.exe”.
  4. Now we restart the computer. In the user selection menu, when you need to enter a password, quickly and repeatedly press the “Ctrl/Alt/Shift” keys.
  5. As planned, the function should have been enabled, but due to the fact that we changed the code in the file, the command line will start.
  6. Enter the command "net user username new_password".

This way we can change the password at any time. This method is good because once you change the specified file, you can no longer use the installation disk. But what if you didn’t have it in the first place? How to reset Windows 7 administrator password without disk?

Third party utility

Typically, sellers of computers and laptops do not supply disks with operating systems. We overpay to buy a computer with Windows pre-installed, but they never give us the disk. What to do? There is another way to reset the Windows 7 administrator password. The program that allows you to do this is called Offline NT Password and Registry Editor. To use it, burn the image to a CD or USB drive.

To install Windows 7 via a USB flash drive, first make sure that your computer supports booting from external media. This can be done by going into the “BIOS” and checking (changing) the order of boot media.

  1. First, boot from your flash drive with the program installed.
  2. A control menu will appear in front of you. You will be able to see a table showing the disk partitions and their sizes. Using them, you need to determine exactly where the OS is installed.
  3. Specify the disk number.
  4. Enter the path to the SAM file. Typically this is "X:/Windows/System32/config".
  5. Enter "1" to reset the password.
  6. Type "1" to select account management. A sign with user names and their RIDs will appear in front of us.
  7. Select the required account. To do this, enter either the user name or identifier in 0x format.
  8. Enter "1" again. This will completely reset the password for the account. By specifying "2", you can change the current password to a new one.
  9. Enter the sequence "q"-Enter-"y"-Enter-"n"-Enter. This will complete the work and save the changes.
  10. Alt+Ctrl+Del to reboot.
  11. You can log in to the account you need.

Bottom line

This article is intended for advanced users who will not be confused when they see a black window and the absence of a mouse cursor. Most of the methods described here are easy to learn, since all interfaces are understandable to anyone who can read carefully and speak English. It is also worth noting that they are intended exclusively for working with home computers, since they use data that only the owner can know. Hacking other people's laptops and PCs is punishable by law, even if it was an innocent joke towards a friend.

Despite the fact that Microsoft has released a couple of reliable and high-performance operating systems over the past few years, Windows 7 still remains as the primary OS on millions of laptops and computers. It is easy to use and familiar to many people, so switching to new platforms today is very tedious. Like all versions of Windows, this one has a password protection feature for logging into your account. This data security format is really effective, but sometimes it can cause certain problems. It is not uncommon for users to forget their password, after which they are unable to log into their profile and use the system as normal. This situation is fraught with complete loss of access to your own important data, but this can be corrected. Finding out the administrator password in Windows 7 is not so difficult, the main thing is to find the right approach.

How to find out the administrator password in Windows 7

For forgetful administrators who constantly forget passwords, Windows developers have provided several built-in tools for recovering or resetting passwords, such as the Net User command, hints, Windows miniPE edition, ERD Commander or safe mode. In addition to these tools, advanced users/programmers/hackers have developed special software for cracking Windows administrator passwords. All these tools will be discussed in detail in this article.

Important: If you forget your Windows password, there is no need to worry or worry; in any case, you will be able to regain your administrator account and change the lost password to a new one!

We hack the administrator password by guessing

The method of cracking a password by guessing is the most labor-intensive, as it takes a lot of time and nerves. Here, all success depends directly on your ingenuity, memory and luck. The matching method is that you will enter the most likely values ​​until one of them is correct. For example, you can try to enter the date of your birth or your immediate family, the day on which a memorable event occurred, and so on. It is very important to try the same value in several variations, using different key registers.

Today, on the Internet, many questions arise about how to reset the Windows administrator password, well, the command line will definitely help you with this. In the very first versions of Microsoft's OS there was no such highly developed graphical interface as it is now and all interactions with the computer were carried out through handwritten commands in a simple shell. To use this method of communicating with your computer today, you need to open Start - All Programs - Accessories - Command Prompt. If you cannot log into your account initially, then a little trick is required.

Insert any drive with the Windows 7 installation image into your laptop or computer and boot from it by pressing the F12 key when turning on the device (depending on the BIOS version). Next, you can call up the interaction window using the Shift+F10 button combination, in which you need to enter the “regedit” value, which opens access to the system registry. Here you will need the HKEY_LOCAL_MACHINE registry branch, after entering it, click on the “File” menu and select the “Load Hive” option. So, after all that has been done, go to the root directory on the disk where your operating system is installed, for example, C:\Windows\System32\config and open the SYSTEM. After entering any name (at your discretion) of the partition to be loaded, enter the HKEY_LOCAL_MACHINE - (Partition name) - Setup branch. There will be several parameters for which you will need to change the values ​​by right-clicking and selecting “Edit”. Set CmdLine to “cmd.exe” and SetupType to “2”. Having selected the name of the partition to be loaded in the HKEY_LOCAL_MACHINE registry branch, unload the hive in the same way. Quit the registry and command line, and also remove the device with the Windows 7 image. Continuing the download, the same command line will open in front of you. In it you will need to enter the command net user account name new password for the account (example: net user Mikle 23568901). It is important to note that if your account name has spaces, please enter it in quotes. That's it.

How to reset Windows 7 administrator password in safe mode

There is a lot of information on the Internet about how to hack an administrator password, but not all of it is well filtered. If the previous method seems too complicated to you, then try doing it differently. So, the step-by-step instructions look something like this:

  • Go to the boot selection menu (F8 key when turning on the device);
  • Select “Safe Mode with Command Line Support”;
  • Wait for the download to complete;
  • Enter the command from the previous method: net user account name new password (example: net user Mikle 23568901);

This method is much easier and simpler to understand, so it is recommended to use it.

Resetting a password on the command line is done exclusively with the net user command, but there are some secrets here too. For example, if you have forgotten the exact name of the account, you can enter the net user command without any additional values ​​and the system will show you all the users that currently exist. In some situations, this will help break the deadlock and easily regain access to your account. You can also launch the command line from Windows using the Win+R key combination and entering the CMD value.

Hack the Administrator password in Windows 8

Windows 8 has a completely modified user interface than Windows 7, but this has only made the method of hacking the administrator password easier. So, you need:

  1. Enter the system recovery section, specifically in the “Diagnostics” - “Advanced options” menu;
  2. Next, you need to go to the command line and enter the value copy from:\windows\System32\sethc.exe from:\temp (this will copy your setch.exe file to another folder, since it will need to be replaced with another);
  3. The next command is copy c:\windows\System32\cmd.exe c:\windows\System32\sethc.exe (copies the cmd.exe file to the desired partition);
  4. Restart the computer and press the Shift key to enter the CMD shell;
  5. "lusrmgr.msc" - command showing the administrator name;
  6. Enter the value net user account name new password into the command line (example: net user Mike 23568901).

As you can see, on Windows 8, cracking a password is not at all difficult, as it might initially seem.

The new Windows 10 operating system has brought with it a lot of innovations not only in terms of interface, but also functions. As before, you can change your password if you lose it. Don’t be intimidated by the long instructions, because once you’ve done the procedure once, next time it will be very, very easy for you.

Using hints to crack your password in Windows 10

Windows 10 has a password hint feature that is highly recommended when creating a password. For example, if you enter the name of your first teacher in elementary school as a secret key, then write that in the hint field. When you see this, you will immediately remember the information you need and regain access to your account without unnecessary headaches.

Windows miniPE edition

Bootable Windows miniPE edition will help you recover your password if it has been forgotten or lost. So, the algorithm of actions is as follows:

  1. Insert the Windows miniPE edition media into the device and boot from it;
  2. Enter the Password Renew menu;
  3. Select your Windows OS folder in Select Windows Folder;
  4. Click on Renew existing user password, selecting the desired user in the drop-down window;
  5. In the New Password field, enter your new password and click Install.
  6. Restart your computer and boot from your hard drive.

This method is good because it is universal and fits many systems.

Changing the administrator password using ERD Commander

How to find out the administrator password in Windows if the above methods did not work? Try the ERD Commander rescue boot image, which is similar in principle to the previously described Windows miniPE edition. You will need:

  1. Boot from the ERD Commander disk;
  2. Select the operating system for manipulation;
  3. In System Tools, select Locksmith Wizard and click Next;
  4. Select the account for which you want to change the administrator password;
  5. In New Password, enter a new password, confirm the action and reboot the device.

Programs for hacking/resetting administrator passwords

Using software to recover or crack passwords is not a good idea, since the applications often do a poor job or have a fairly high monetary value. Of the very good options, only a few can be noted, for example, Offline NT Password and Registry editor is a powerful tool and the most relevant one today. The software even works with the latest versions of Windows, not to mention XP and earlier Microsoft products. Another good alternative is Windows Password Recovery Lastic. As the name suggests, the main purpose of this application is to remove the administrator password. I would also like to mention an application called Active Password Changer, which can be quite effective if you have forgotten your password and are unable to log into your account.

Please note: To follow most of the instructions in this article, you must use a local Windows account with administrator rights.

How to set a password on a Windows computer

If other people have access to your computer, it is wise to protect Windows with a password. This way, your settings and data will be safe: without special knowledge, no one will be able to view or change them. Windows will prompt you for a password when you turn on your computer, when you change your account, or after resuming from sleep mode.

  1. Open Start → Settings (gear icon) → Accounts → Sign-in options.
  2. Click "Add" under "Password".
  3. Fill in the fields according to the system prompts and click “Finish”.

How to set a password on Windows 8.1, 8

  1. In the right sidebar, click Settings (gear icon) → Change PC settings. In the menu of the window that opens, select “Accounts” (or “Users”), and then “Login Options”.
  2. Click on the " " button.
  3. Fill out the fields, click “Next” and “Finish”.

How to set a password on Windows 7, Vista, XP

  1. Open the section “Start” → “Control Panel” → “User Accounts”.
  2. Select the desired account and click “Create a password” or immediately click “Create a password for your account.”
  3. Fill in the fields using the system prompts and click on the “Create password” button.

If strangers do not have physical access to your computer, it may be better to disable protection. This will eliminate the need to enter a password every time the system starts.

  1. Use the Windows + R key combination and enter in the command line netplwiz(or control userpasswords2, if the first command does not work). Press Enter.
  2. In the window that opens, select in the list the account for which you want to remove the password, and uncheck the box next to “Require username and password.” Click OK.
  3. Enter the password, confirm it and click OK.

Windows will stop asking for a password only when you turn on the computer. But if you lock the screen (Windows keys + L), log out, or the computer goes into sleep mode, the password prompt will still appear on the display.

If the “Require username and password” option is not available, or you want to completely remove your Windows password rather than disable it, try another method for more experienced users.

To do this, open the account management section using one of the instructions at the beginning of this article.

If the open section says that you are using a Microsoft online profile (sign in with email and password), disable it. Then use the system prompts to create a local profile, but do not fill out the password fields during the process.

After you disable your Microsoft account, the system will no longer sync your settings and files across different computers. Some applications may refuse to work.

If the local profile is initially active in the account management menu, then simply change the current password, leaving the fields for the new password empty.

If you delete an old password, the system will never prompt you for it until you add a new one.

How to remove the password when resuming from sleep mode

If you disable the password prompt when Windows starts, the system may still prompt you for it when you wake up. But you can deactivate this feature separately using these instructions.

  1. In the search bar in Windows, enter “Power Options” and click on the link found to the section with the same name. Or find it manually through the Control Panel.
  2. Click "Require a password when you wake up," then "Change settings that are currently unavailable" and check the "Don't ask for a password" checkbox.
  3. Save your changes.

How to remove password when waking up Windows XP

  1. Open the “Control Panel” → “Power Options” section.
  2. In the window that appears, open the “Advanced” tab and uncheck the box next to “Require a password when exiting standby mode.”
  3. Save your changes.

If you have forgotten your password and cannot log into your local Windows administrator profile, there is no need to reinstall the OS. There is a simpler solution: resetting the password protection. To do this, you will need another computer, a USB drive, and a free password reset utility.

Create a bootable USB flash drive on another PC

  1. Download the Lazesoft Recover My Password installer onto any available computer.
  2. Run the downloaded file and complete the installation.
  3. Connect the flash drive to your computer. If necessary, make a copy of the files stored on it, since all information will have to be deleted.
  4. Open Lazesoft Recover My Password, click Burn Bootable CD/USB Disk Now! and create a bootable USB flash drive using the program prompts.

Boot your computer using a flash drive

  1. Insert the prepared USB drive into the computer for which you have forgotten the password.
  2. Turn on (or restart) the PC and, as soon as it starts to boot, press the key to go to the BIOS settings. Usually this is F2, F8, F9 or F12 - depending on the equipment manufacturer. Most often, the required key is displayed on the screen while loading the BIOS.
  3. While in the BIOS menu, go to the Boot section if the system does not redirect you there right away.
  4. In the Boot section, install the USB flash drive to the first place in the list of devices that appears on the screen. If you don't know how to do this, look around - there should be some control tips nearby.
  5. Save your changes.

If the BIOS is also protected by a password that is unknown to you, then you will not be able to reset Windows password protection using Lazesoft Recover My Password.

Perhaps instead of the classic BIOS you will see a more modern graphical interface. In addition, even in different older BIOS versions, the settings may differ. But in any case, the procedure will be approximately the same: go to the Boot menu, select the desired USB drive as the source and save the changes.

After this, the computer should boot from the flash drive on which the Lazesoft Recover My Password utility is recorded.

Reset your password with Lazesoft Recover My Password

  1. Select Lazesoft Live CD (EMS Enabled) and press Enter.
  2. Reset your account password using Lazesoft Recover My Password tips.
  3. Reboot.

After these steps, Windows will stop asking for the old password, and you can set a new one according to the instructions at the beginning of the article.

We have the opportunity bypass password in windows 7 without resetting, if you forgot it? Of course there is! Now we will tell you how to find out the account password or administrator password of Windows 7/8/10.

Method 1. Bypass Windows 7 password in safe mode

You can change your Windows password in Safe Mode using the following steps:

Step 1.Press F8 before the Windows boot screen.

Step 2: Select Windows Safe Mode - “Safe Mode with Command Prompt”→ Press “Enter” next.

Step 3: Type net user and press Enter, all accounts on Windows PC will be displayed.

Step 4: Enter your locked user account with new password in the command line, for example “Happy 123456” means your new password for network user “Happy”.

Step 5: Once your computer restarts, you can automatically log into your computer with a new password.
(Note: When you recover Windows password from Safe Mode, an administrator account with a known password is required. If not, go to method 2)

Method 2. Bypass password in windows 7 using password reset disk

If you have created a Windows recovery disk with a password in the past, below are the steps to crack a forgotten password in Windows:

1. If you enter an incorrect password when trying to log in, Windows will display an incorrect password message. Click OK to close the message.

2. Click Reset Password, and then insert the password reset disc.

3. Follow the steps in the Password Reset Wizard to create a new password.

4. Log in with your new password. If you forgot your password again, you can use the same password reset disk. You don't need to create a new one.

(Note: The disk only works in a specific account, if you changed the Windows XP password for that account, it still works. But if you don't have a password reset disk, then the only way to bypass your Windows 7 password is using a third party application. )

Method 3. Hacking a Windows 7 password without a disk or flash drive

Windows Password Key– a third party utility, goes to the assistant when your computer is completely locked without a created password reset disk. Someone may suggest that you reinstall the system, but this is completely unnecessary. Windows Password Key Professional can help you reset your Windows password and successfully log into your computer again without the risk of losing data. Follow the three steps to pass Windows password; You'll soon be enjoying your PC.

Step 1: Log into any other accessible computer (not locked), download and install Windows Password Key.

Step 2. Copy CD/DVD or USB flash drives using this program.

Step 3: Insert the disc into your locked computer and follow the software wizard to bypass the forgotten Windows password with a burned CD/DVD or USB drive.

Video tutorial on how to bypass the administrator password in Windows 7 using WindowsPasswordKey

Whenever you have forgotten your Windows password, remember to use the Windows password key, and then you can easily and quickly unlock your forgotten Windows password in minutes!

There are several ways to restore access to a Windows 7 user account. However, we will not delve into the theory and explore all the options for this procedure, but will look at the most logical, simple and effective method to resolve the problem of how to recover the Windows 7 administrator password.

To reset (or recover) your password, you will need a bootable USB flash drive or disk. Typically, such media is used to install Windows 7, but we will use the distribution a little differently. If you have two operating systems installed, then you can do without installation media by performing all the steps described below through the accessible Windows environment.

Important! The bitness of the system recorded on the installation disk must match the bitness of Windows to which you want to restore access.

If you have already encountered the need to recover the administrator password in Windows XP, then you should know about the existence of the ERD Commander utility. In Windows 7, it also works correctly, allowing you to reset the system access code, so if you wish, you can opt to use it.

Connect the installation media to the computer and configure the BIOS correctly, setting the boot priority correctly:

  • If using a flash drive, the USB device should boot first.
  • If you have a Windows 7 disc, the CD-ROM (DVD-ROM) must boot first.

After the reboot, the Windows 7 installation window will appear. The installed settings for language, time and date, and layout can not be changed, just click the “Next” button.

A search for available ones will start, after which you will be asked to select one of the found versions of Windows (if there are several of them). Select the desired OS and click Next.

Select "Command Prompt".

Enter the “regedit” command to launch the built-in registry editor.

In the menu on the left, highlight the “HKEY_LOCAL_MACHINE” section.

Expand the File menu and click Load Hive.

Go through the opened explorer to the path C:\Windows → → config. The letter may be different - indicate the partition where Windows is located, to which you want to restore access. Select the "SYSTEM" file and click "Open".

Give the new section any name and click OK.

Go to the HKEY_LOCAL_MACHINE branch in the registry editor → 157→ Setup. Double-click on the “CmdLine” parameter and set it to “cmd.exe”. Click "Ok" to save the changes.

Change the “SetupType” parameter in the same way, setting it to “2”.

As a result, you should have a picture like this in the editor window:

Select the created section. Expand the File menu and select Unload Hive.

Confirm your desire by clicking “Yes” in the window that appears.

Exit Registry Editor, close Command Prompt, and click Restart.

Changing your password

After the system restarts, the program will begin preparing the computer for the first launch. At this moment, a command line will appear on the screen, with which you will have to work further.

Search for "net user" to see a list of all accounts.

Having selected a user name, enter the following command: “net user login password.” Close the command prompt. You can now log into your profile using the access code you just provided.

After gaining access to your account, you can reset the password on your computer. If you don't need the security key, go to the "Control Panel" and in the "Accounts" section, remove the password so that you no longer have to regain lost access.



Related publications: