Home-Windows-We connect the phone in xiaomi fastboot mode. How to exit FastBoot mode on Xiaomi

We connect the phone in xiaomi fastboot mode. How to exit FastBoot mode on Xiaomi

Sometimes phone or tablet users Android based encounter Fastboot Mode without absolutely understanding what it is?

When they turn on their gadget, they see a screen with animation and some list of data, which is more reminiscent of a system failure.

As a rule, normal reboot you can't get away with it here and it’s better to follow the instructions step by step than to try to figure it out on your own. After all, it is one of the system ones, and a user who is poorly versed in such things can accidentally harm his own gadget.

Subsequently, because of this, you will have to contact the service, wasting your time and money. But this can be easily avoided if you figure out the problem without unnecessary haste.

Below you can find out in detail what it is, why the process occurs and how to act when it appears.

Contents:

What is it

On Android operating system it provides full access to a smartphone or tablet to control it via a computer. This approach allows:

  • install applications;
  • tune various parameters;
  • flash the gadget;
  • distribute access rights.

Fastboot is not part of one specific OS, but it can often be found in environments Android SDK, because without it it will not be possible to fully establish a connection between the PC and the gadget.

IN in this case This means that data transfer is not easy, namely setting up the device.

It is worth noting that it starts earlier than the operating system itself. This suggests that the mode can be used even when it is not yet installed on your gadget.

Why does it occur

Having such a mode is very useful, but what to do when you don’t need to configure your smartphone in this way, and a window suddenly appears?

Reasons for its appearance may be different:

  • error when flashing the gadget;
  • accidental key presses – turning on the smartphone and increasing the volume at the same time;

In any of these cases, the device screen will display Android icon, and also system information according to your gadget.

To begin with, if Fastboot occurs, you should check if .

The volume up and down buttons are active - with the first we scroll through the items that are displayed on the screen, and with the second we make a choice (like using a key Enter on PC).

Thus, we reach the inscription "NormalBoot" and select it with the volume down button.

If after that the smartphone turns on quietly, then this, at a minimum, indicates that there are no problems with it and a system failure is also not the cause. Sometimes it occurs due to the connection to the computer.

Synchronization occurs, you do all the necessary actions: install a new application, upload a photo or download a movie, and then, disconnecting from the PC, you see that it does not disappear.

This is due to the fact that in service center You probably haven't disabled this feature. You can deal with this on your own:

  • after the gadget loads normally, go to it "Settings";
  • then select the tab "Screen";
  • Having found the item in it, uncheck it.

Thus, the fastboot mode will be deactivated, and when turned on, it will no longer disturb the user.

What to do in case of a system failure

If the transition to "Normal Boot" blocked or, even worse, only one message is visible on the screen "Fastboot Mode" and there is no summary of parameters, then for some reason the gadget’s system has failed and there are two options on how to fix everything.

Option 1

You can always try to restore the system and return your smartphone to working condition.

Important! During recovery, all data stored on the smartphone is formatted, so it is better to protect yourself and first remove the memory card.

First, you need to hold down the power and volume up buttons at the same time. In the menu that appears, find the item – wipe data/factory reset.

And then select it and wait until all settings are rolled back. The process may take from one to several minutes.

The gadget will reboot, and you will again be able to use it for your own purposes.

That's just installed applications and bookmarks in the browser will have to be restored again, because such a procedure returns it to factory settings.

Option 2

You should resort to this option as a last resort, when none of the the above methods definitely doesn't work.

If the mode that appears when you turn it on does not contain parameters, if rebooting the gadget does nothing and you can’t even call it up, then you have to do the following:

  • remove the battery;
  • insert it back;
  • Press and hold the power button for at least 30 seconds.

The return of Fastboot Mode will make it clear that it’s time to move on to more drastic actions.

You will have to reboot the device, but through the computer.

Pay attention! To work with a smartphone that has experienced a system failure, you will need suitable drivers.

Not that difficult.

Just use a search engine, and from a series of suggested sites offering to download “firewood”, try to choose official ones in order to eliminate unpleasant incidents associated with the introduction of viruses, etc.

1 Unzip downloaded “firewood”;

2 Data from the archive put it in a folder;

3 After connect the gadget to the PC via USB cable;

4 You will have to spend some time waiting, while the computer recognizes the smartphone, after which he will offer to install drivers to start working with the gadget;

5 Since we have already pre-downloaded them, then select “Install from specified location» ;

6 Select the folder in which you placed them and click Enter.

After the drivers are successfully installed, let's move on to working with the device via command line .

  • go to the menu "Start";
  • in the execution line we write "cmd";

This method, which includes the use of a PC, is the most effective. But it’s still best to resort to it when smaller and smaller ones probably won’t work. simple steps on restoration.

Fastboot Mode in Android smartphone

Those who have already dabbled with smartphone firmware undoubtedly know that Fastboot is a very useful thing. It is with its help that you can install custom (unofficial) firmware on your device. But in some cases, unexpected loading of the gadget into this mode may indicate that not everything is in order with the device. The good thing is that this problem can be easily solved. So panic attacks are completely unnecessary.

Read also: TOP 9 Best keyboards for Android 2018 + Reviews

Fastboot Mode in Moto G

Many people think that they can get rid of this mode by simply “distorting” the device’s battery (if it is removable). But practice shows that such thoughts are fundamentally wrong. If a system failure occurs, then manipulating the battery will not help return standard settings and load the device into normal mode. Actions of a different nature will be needed here. But nothing will be complicated.

Under no circumstances should you panic, take out the battery and perform similar actions. The device also does not need repairs. This mode is a kind of smartphone BIOS. And it can be easily controlled.

What is Fastboot Mode and what is it used for?

Read also: TOP 10 Best VPNs for Android: services that can be downloaded and installed for free on your smartphone

Fastboot mode is a diagnostic shell Android systems. She reminds me of something Computer BIOS or laptop. But in Fastboot everything is not as clear as in BIOS. What can you do with using Fastboot Mode?

  • Installing firmware. This option is only available if USB debugging (ADB) is enabled in the smartphone settings
  • Reset to factory settings. It is used if the device has started to work very poorly, but you don’t want to change the firmware
  • Installing recovery. Using this mode, set custom recovery for subsequent installation of unofficial firmware
  • Working with a smartphone on hardware level. Fastboot Mode is very useful option for developers. It allows you to communicate directly with the hardware. Subject to the availability of appropriate software on the PC

All of the above makes it clear that Fastboot Mode is intended mainly for developers of mobile software and firmware. For a regular user This option is unnecessary. And yet, sometimes users are forced to watch this mode in all its glory.

Therefore, you need to know how you can boot your smartphone in normal mode. Or how to flash the device using Fastboot Mode. Although the latter is individual for everyone mobile gadget. Universal instructions no on this matter.

How to enter the mode?

Read also:[Instructions] How to create an email on an Android smartphone absolutely free

Sometimes users need to specifically enter Fastboot Mode. Perhaps the user wants to install new firmware or update the gadget when ADB help. In any case, you need to know how to boot the device into Fastboot.

This procedure may vary between devices. various manufacturers. But for the most part the algorithm is the same. First you need to turn off your smartphone completely. Typically, long pressing the power button is enough to do this.

After turning off the device, you can begin loading the desired mode. To do this, you need to hold down the power and power buttons at the same time. "volume up." May be used on some models "volume down."

It is also very likely that to launch Fastboot Mode, you will have to press both volume buttons together with the power key. Here you will have to use the selection method. If successful, an image of a green robot will appear on the screen. Sometimes there may even be corresponding text.

How to exit the mode?

Read also: How to download root rights for Android + TOP 10 programs for rooting

This question is asked by many newbies. And the answer depends on why the smartphone suddenly decided to boot into Fastboot Mode. If this happened because the user accidentally pressed the corresponding buttons, then it will be enough to simply reboot the device.

But if the gadget entered this mode immediately after the reboot, then there is nothing good about it. There was probably some kind of system failure. And now the device requires user intervention in order to boot normally.

There are several options to solve the problem. They are not particularly complex, so the user does not require any special skills. Specialized software won't be needed either.

Method No. 1. We use recovery

Recovery is a device control shell that is independent and in no way depends on the firmware version. Using this tool, you can perform a factory reset, install an update, or change the firmware.

The trouble is that smartphones from different manufacturers appearance standard recovery may vary greatly. Therefore, the main thing here is to focus on the names of the items that need to be used to exit Fastboot.

If you have custom recovery installed on your device, then it’s much easier. The fact is that there are very few such things. And their interface is almost the same. However, let's consider the option with stock recovery.

So, in most smartphones, Fastboot mode does not allow you to perform any actions. The screensaver is just hanging. Each device has its own.

Now you need to enter recovery mode. To do this, simultaneously press the power button and "volume +". After a while, recovery mode will load. First you need to try to boot into normal mode. Select an item "Reboot". After this, the device should start normally.

If this does not help and the smartphone boots into Fastboot again, then you need to enter recovery mode again. Only now will the settings be reset. In the main recovery menu, select the button "Wipe Data". Then select again "Reboot".

After these steps, the smartphone should boot with factory settings. In the vast majority of cases, this procedure helps. And it doesn’t matter which company’s device is now in the user’s hands.

After "vaipa" data, everything that was installed on the device will disappear. You will have to reinstall all applications. You will also need to fully configure the device. Factory settings assume a pristine gadget. But everything will work like new.

Method number 2. We use a computer

It is rare, but it happens that the recovery mode along with a data wipe cannot boot the smartphone in normal mode. In this case, you will have to turn to your PC or laptop for help. This device will help solve the problem.

But you need to take into account that for this you will need an original USB cable from your smartphone. You will also need to download drivers for the device. Without this nothing will work. It is important to check that the drivers included in the package are those that enable ADB to work.

In some cases, when installing drivers you will have to disable verification digital signatures in the OS. If found necessary drivers If it didn’t work out, then you can rely on the system. It will try to find the required components on Microsoft servers.

Now you need to connect the device to your computer using a USB cable and wait until it is detected by the system. Next, on the command line, enter the command "fastboot reboot" and press "Enter".

After performing this action, the device will boot into normal mode with a 100% guarantee. If after entering the required command nothing happens, then the problem is in the drivers. You need to look for the “correct” ones on the manufacturer’s website or relevant forums.

If you used the above steps "wrong" driver, the consequences may be unpredictable. In particular, the user may well receive, instead of a smartphone, "brick". And then you will have to restore the gadget’s firmware. And this is quite difficult.

While using a mobile device based on Android OS (and especially after an unsuccessful flashing of the device), the user may experience a sudden reboot of his gadget. After the reboot, a menu may appear on the smartphone screen prompting you to select the device boot mode (“Select boot mode”), and one of these modes, along with “ Recovery Mode" And " Fastboot mode", is the "Normal boot" mode. IN this material I’ll tell you what Normal Boot is on Android, what its features are, and I’ll also explain the difference between Normal Boot and other boot modes for your gadget.

"Normal Boot"- This standard mode loading your mobile device. Typically, this boot mode is selected automatically by the device, provided there are no errors (early or present) in the system. The bootloader data is read, then the operating system kernel is loaded, including complete set drivers and subsystems for memory, security, and network management. The kernel tools also include ramdisk, a software tool designed to initialize file system partitions. File system is mounted, the necessary ones are launched system services, and, ultimately, the user sees the desktop window of his gadget.


If your device suddenly rebooted and then prompted you to select the boot options "normal boot" - "fast boot" - "recovery mode", then this may indicate that there are software or hardware problems with the device. By pressing the "volume up" button, select the "normal boot" mode, and then press the "volume down" button to boot your gadget in normal mode.


Select the “Normal Boot” mode

Fast boot, Normal Boot and Recovery Mode

Along with “Normal Boot” (we have already figured out what Normal Boot is), the system can offer a boot mode called “Fast boot”. Fastboot mode is not part of the Android OS, but rather is important element bootloader of a specific mobile device (some devices do not support Fastboot at all). This mode is intended for flashing the device, allowing you to flash both the entire memory of the device and its individual sections.

Also on many devices, along with “Normal boot” and “Fast boot”, a choice of recovery mode (“Recovery Mode”) is available. This mode designed to stabilize normal operation device, allowing you to perform a factory reset, as well as to install important system updates.


Conclusion

“Normal Boot” mode is used by your gadget to standard download structural components of the operating system. Typically, such a mode is selected automatically by the system, if the system has not previously encountered various errors in its operation. If your gadget suddenly rebooted, and then the “normal boot” or “fast boot” selection mode appeared on the screen, use the “volume up” button to select the “normal boot” mode, and by pressing the “volume down” button, select the standard boot algorithm for your gadget .

We decided to flash our Android using Fastboot utilities, but that’s not the problem, you don’t know how to convert the device to special mode? Our site presents the most complete article on Android translation to mode Bootloader/Fastboot!

Switch to fastboot mode Asus

1. Turn off the device;

Volume Up + ON/OFF »

3. Hold down two buttons until the message appears: “ CSC Mode. Long press POWER to restart system «

Asus - How to enter Fastboot mode (video)

Switch to fastboot mode Pixel, Nexus, HTC

1. Turn off the device;

2. Press and hold the “ Volume Down + ON/OFF »

Nexus - How to enter Fastboot mode (video)

HTC - How to enter Fastboot mode (video)

Switch to fastboot mode Sony

1. Disconnect from the computer and turn off the device;

2. Press and hold the “ Volume Up" + connect via USB

Sony - How to enter Fastboot mode (video)

Switch to fastboot mode Motorola

Option 1

1. Turn off the device;

2. Press and hold the “ Volume Down + Volume Up + ON/OFF »

3. Hold three buttons until the required menu appears.

Option 2

1. Turn off the device;

2. Press and hold the “ Volume Down + ON/OFF »


3. Hold two buttons until the required menu appears.

Motorola - How to enter Fastboot mode (video)

Switch to Xiaomi fastboot mode

1. Turn off the device;

2. Press and hold the “ Volume Down + ON/OFF »

3. Hold two buttons until the required menu appears.

Fastboot mode is special program code or a component located in the memory chip of Android devices, i.e. it is independent of the Android operating system and can be called even if there are problems with the system itself. Using Fastboot mode (translated into Russian - mode fast loading) perform next row tasks:

  • gaining access to system components Android;
  • recovery and backup data on the device;
  • opening root access on the device;
  • change system settings devices that are normally hidden from users;
  • software testing by developers;
  • software recovery;
  • flashing the device;
  • and much more.

As you can understand, Fastboot Mode is extremely powerful tool, which can easily be used by both developers and ordinary users. However, most often information about this mode is sought by users who have had this mode activated out of the blue on their device. Let's take a closer look at activating and exiting Fastboot mode.

How to enter/exit Fastboot mode on Android

So, first we need to understand for what reasons Fastboot mode can be activated at all. This mode is activated due to:

  • pressing a combination of the power and volume keys (either + or -);
  • a serious failure occurs in the Android OS;
  • unsuccessful firmware on the user's part
  • connecting the device via a USB cable to a computer with activated function « Quick start»;
  • obtaining root access.

Unfortunately, simply rebooting the device often fails to get out of fast boot mode, and therefore you have to use slightly more sophisticated methods. However, you can try and reboot first.

Note: among other things, the fastboot mode screen may display a huge “Start” button (or the “Normal boot” item), clicking on which should start your device in normal mode - press this button if available.

If it doesn’t help, then try removing the battery from your Android smartphone for about thirty seconds, and then turning it on again. For users of old smartphones this decision helps, however, on new devices this solution is simply not applicable: the battery of modern mobile phones- non-removable.

Ok, the next thing you can try is to enter the boot selection mode (Select Boot Mode) and start the device in normal mode. So, turn off your smartphone and then hold down the Power and Volume Down keys for ten seconds. A screen with various actions- Select Normal Boot. Once you select this item, your device should boot into operating system Android.

Another way to exit Fastboot mode is to use a handy computer. First, you will need to install ADB + Fastboot on your computer, then connect your smartphone to your PC using a regular USB cable. Once everything is done, open a command prompt and run fastboot command reboot, after which your smartphone will be rebooted and successfully exited from the corresponding mode.

Well, if you were unable to start your gadget in normal mode even after doing all of the above (and this happens), then you will need to perform full reset of your device through recovery mode. Press the combination of the power and volume up buttons, and then wait until the recovery mode appears. Click “wipe data/factory reset” in the list and select it. The process of resetting your device may take some time, so you will have to be patient. After the reset, your smartphone will return to normal mode.

What should I do if my smartphone enters Fastboot mode when connected to a PC?

Another interesting topic: Some Android smartphone users complain that their devices, for some reason, enter fast boot mode on their own when connected to a PC via a USB cable. Well, if this happens, then you probably have the “Quick Start” option activated in your smartphone settings. You need to disable this option and everything will fall into place. To do this, do the following.



Related publications: