Router asus rt n12 connection and configuration. Self-configuration and connection of Asus RT-N12

External view of the rt-n12 router

The Asus rt-n12 router is a common and budget router model that combines well the most useful parameters and characteristics for home use. RT n-12 is a portable Wi-Fi access point, the speed of receiving and transmitting information arrays is about 150 Mbit. The communication standard supported by the equipment is 802.11n, operating frequency is 2.4 GHz. The device also has 4 LAN ports.

Before studying the topic that interests us: how to set up a wifi router asus rt n12, let’s look at the main points and nuances of the router’s operation.

The front panel of the rt n12 contains 7 interactive icons:

Food - 1;
Wireless connection status - 1;
Internet connection – 1 piece;
Local connection – 4 pieces.

The rear panel of the device contains connectors:

WAN port;
LAN connectors – 4 pcs.;
Power socket.

Also on the back you can find buttons: power, WPS and reboot.

Connecting and setting up equipment is a simple matter. Let's take a closer look at each of their stages.

Making a connection

Before setting up the router, you will need to make a connection. The whole process can be easily represented in the form of a clear and easy-to-follow list of steps:

You can connect the router to the power supply using the DC In connector. The entrance is located on the rear side;
We directly connect the power adapter to a 220 V network;
The initial setup of the asus rt n12 will require the use of a “hard” connection via a wireless router using an Internet cable;
The LAN connector will need to be connected to the device’s network card.

After manually performing these simple steps, turn on the power button. The router is installed and connected, which means it is ready to go.

Having figured out how to properly install the router, you can move on to the next part - configuration. Using a command entered into the address bar (usually the device’s IP address), you can get to the device interface.

You should remember one important detail: if the connection you are making to the router is not primary, it is recommended to perform a complete reset.

Router configurations for various providers

enter the router interface, copy and enter http://192.168.0.1 or http://192.168.1.1 in the address bar of the browser,

First menu of Asus rt-n12. Router characteristics. Click "Go"

Connection type – PPPoE

Let's take a closer look at how the asus rt n12 router is configured to work with providers such as Rostelecom or Dom.Ru. To carry out the procedure, go to the model interface, and on the “additional settings” tab, select the “WAN” menu.

We configure the equipment as follows:

Type – PPPoE;
Port – depending on the socket selected on the rear panel. By default, it is recommended to choose LAN4;
UPnP – enable by checking “yes”;
Obtaining a WAN address automatically – “yes”;
In the relay menu, set the value to “no”;
In the password and login lines you will need to enter the data provided by the provider.

After setting, you will need to confirm saving the changes by clicking the “apply” button located at the bottom of the window.

Setting up the asus rt n12 to work with providers such as Beeline or MTS, as well as other predominantly mobile providers, is similar to the procedure discussed for Rostelecom.

The difference is negligible:

We went to the WAN menu (how to log in is described earlier), in the “type” line we set L2TP;
For UPnP – “yes”
Automatically obtaining an IP address – “yes”;
Automatic connection to DNS – “yes”.

Let's look at the procedure for setting up Wi-Fi

Wi-Fi on the router: setup

You can also configure the asus rt router to work with a wireless network. Setting up wifi will require accessing the “wireless network” menu. There we set certain values:

SSID – the name of the future network. It must be unique - if the name of another network is repeated, there is a possibility of errors;

You can safely skip other parameters and values before the “authentication method” - they are set automatically in the most appropriate way;

In the “authentication method” line, set the value to “WPA2 personal”;

At the beginning of the article, we raised the question of some need to reset settings. Let's take a closer look at the process.

Reset settings

We figured out how to connect and configure the equipment. However, what should you do if you need to reset? You will need to use an object with a thin point - a non-staining pen or needle will do. It will need to be inserted into the router into the slot labeled “Reset”.

After holding the needle or pen pressed for 10-15 seconds, the device can be considered restarted: the settings will be reset.

You can start setting up your own!

Summing up

Setting up network equipment such as rt n12 is really a simple matter and there is nothing difficult about it. By carefully studying the material in the article and delving into it, you will eliminate the need to call specialists to carry out work that you can easily do yourself.

We looked at how to enter the interface and menu of the router, which you need to work with to set up, connect and organize a Wi-Fi network. The procedure for creating a connection to the most common providers was also discussed.

It is recommended to remember about resetting the settings: in some cases, when the equipment has been used previously, some of them may be set in such a way that they are not suitable for home use and will not allow you to correctly use network services. By resetting and reconfiguring the equipment yourself, you will be able to use all its functions fully and without difficulty.

This article will discuss all aspects related to setting up routers from the well-known company ASUS when connecting to the Rostelecom provider. The points related to the parameters and connecting them to the Internet will be described. We will also shed light on all the advantages and disadvantages when choosing routers from this company. An example would be setting up the ASUS RT N12 router for Rostelecom.

Setting up the ASUS RT N12 router for Rostelecom

There are several connectors on the back of the device. Four of them are for connecting other computers and devices to your home network, and the fifth is for connecting your service provider's cord. Settings should be performed from a device that has a direct connection to the network card.

Important: When connecting, check the operating system network settings. In the selected section, you will need to set the IP address to be obtained automatically.

Next, we will directly install the router. There is a sticker on the back panel that shows the IP address, username and key to enter its parameters. To launch the device installation window, you need to enter its address in the browser line. For the company in question, it is the same 192.168.1.1. Next, the router will select the parameters automatically; you just need to fill in a few simple fields. The user will be prompted to change the key to the router settings, then the device will automatically select the connection type, require a password for the Internet and offer to come up with a name and password for your Wi-Fi. This completes the automatic selection of parameters and the Internet should start working. If there is still no Internet, then the information below is especially for you.

Setting router parameters manually

To perform parameterization manually, select the “Connection” tab and enter the following data:

WAN connection – PPPoE;
activate WAN – yes;
enable NAT – yes;
activate UPnP – no;
receive IP automatically – yes;
automatically connect to DNS – yes;
Enter the login name and key provided by the provider.

The rest of the data should be left as default. If everything is done correctly, then you will already be able to view Internet pages from your computer and other devices connected to the network. If necessary, you can also set up a wireless network.

Wi-Fi setup

In the router interface, find “Wireless Networks” – “General” and set:

hide SSID – no;
SSID – enter the name of your Wi-Fi network;
Wi-Fi network mode – auto;
channel width 20/40 MHz;
channel – 7;
extended channel – auto;
WPA key – come up with a password for your Wi-Fi network;
authentication method – WPA-Personal;
encryption WPA - AES.

After that, save the parameters and exit the router interface. Checking the Internet connection. Next, we will consider a number of problems that usually arise when setting the parameters of this device.

Setting up the ASUS RT G32 router for Rostelecom is practically no different from installing the previous one, but there are a few points you should know. If you select WPA2-Personal. Also, when installing the router itself, you will be asked to select a port. If you have television from this company, select the same port.

Configuring ASUS DSL N10, RT N10P and RT N 10U routers for Rostelecom

Since the three above devices belong to the same family, their setup is no different from each other. We connect the wires in the same way as on the RT N12, after which we proceed to installation. We enter the same IP address in the browser line. And in general, the parameters of these models are not much different from the previous ones. We will be asked to set the time zone, select “GMT+02.00 South Africa, Greece, Ukraine, Romania, Russia, Turkey”.

When prompted to select a provider, select Others. In the settings window that opens, set the same configurations as described above. As you can see, setting up ASUS routers for Rostelecom is not particularly difficult, you just need to strictly follow the instructions.

Important: when setting up the ASUS RT N10P router for Rostelecom, you should take into account its not too high data transfer speed. Therefore, if the load on the router will be more than 1 device, we recommend purchasing another router.

Possible problems and troubleshooting

If the computer reports that it is not possible to access the Internet, follow these steps. You need to set the wireless network settings on your computer to the same ones that you specified when parameterizing the router.

If there is Wi-Fi, but no access to the Internet, go to the settings and check if there is a connection to Rostelecom. If not, reboot your router. If the problem persists, contact your provider.

Advantages and disadvantages of ASUS routers

The undoubted advantages of the products manufactured by this company include high signal quality without failure, good connection speed, even when connecting three or more devices, and an ergonomic interface during setup. Also, almost all models have an excellent design that will fit well into the interior of any home.

The disadvantages include a short cable on most devices and a somewhat inflated price. However, not all models have a high price. For example, the ASUS RT N 10U router costs only 500 rubles and is also ideal for setting up the network of a provider such as Rostelecom.

Thus, the model of the company in question performs its main function – high-speed Internet connection – perfectly and their advantages significantly cover the disadvantages.

RT-N 12 is no different from other router models, the same soap dish design, the same supported b / g / n standards.

For users who are accustomed to configuring routers from Netgear, Linksys, TP-Link, D - Link, the interface will seem somewhat unusual due to the presence of a graphical component, which, according to the manufacturer, is designed to make it easier to view the settings made.

In general, the setup is similar to the setup of all home routers

Step 1. Connecting the router to the PC

Everything is as usual - we insert a patch cord into any of the yellow ones (usually it comes included), at the other end we connect it to the corresponding PC connector or from which the settings will be made.

Insert the Internet connection cable into the blue WAN port.

Turn the router over and look at the default settings. We will need to know: connection IP address, username and password.

On the computer, in the network connection properties, select automatic acquisition of an IP address.

Then go to any convenient browser and in the address bar write the same IP address that is written on the sticker at the bottom of the router.

To configure the router, go to the “Advanced Setting" menu.

The menu items are exactly the same for the left and center windows, so here you should base your personal preferences on convenience.

Step 3: Set up a wireless network

Go to the “Wireless” submenu, General tab.

In the “SSID" field we write down the name of the wireless network; there is no need to hide it - put a checkmark in the "No" position for the "Hide SSID" field.

Since there are still quite a lot of devices that do not support the n-standard, in the “Wireless Mode” field we set the mode to “Auto”.

The channel bandwidth (Chanel bandwidth) is usually 20 MHz, but you can experiment by setting the width to 40 MHz.

Select the automatic mode of the broadcast channel, “Chanel” – “Auto”.

Authentication method - WPA2-Personal, encryption type AES. In the “WPA Pre-Shared Key” field, enter the password to access the wireless network.

Apply the entered “Apply” settings.

Go to the “WPS” submenu and disable the corresponding mode by pressing the “Disable” button.

Step 4. Configuring internal (LAN) and external (WAN) networks

Let's start setting up the internal network. Go to the “LAN” menu. Here, if necessary, you can change the router’s IP address.

Go to the “DHCP Server” tab.

By default, the router's DHCP server is enabled - for the “Enable the DHCP Server?” field. is set to “Yes”.

The pool of addresses issued to clients can be reduced to two dozen in the “IP Pool Ending Address” field; at the end, change “254” to “20”.

Let’s go to the “WAN” menu and consider connecting via the PPPoE protocol. In the “WAN Connection Type” field, select PPPoE.

As a rule, connecting via PPPoE involves automatically obtaining an IP address, so in the “WAN IP Setting” section, in the “Get the WAN IP automatically” field, mark “Yes”.

The same thing, to get a list of DNS servers of the provider “Connect to DNS Server automatically”, check “Yes”.

In the Account Setting section, in the “User Name” and “Password” fields, enter the user name and password that are specified in the agreement with the Internet provider. Click “Apply”.

In order to get to the router’s web interface, you need to open your Internet browser and type 192. 168.1.1 in the address bar, Username - admin , Password - admin(provided that the router has factory settings and its IP has not changed).

Setting up Wi-Fi on the router

In the router interface, you need to go to the tab on the left Additional options Wireless network.

We set the parameters as follows:

Field SSID: Enter the name of the wireless network. The value in this field cannot be changed.
Authentication method: WPA2-Personal
WPA encryption: TKIP or AES
WPA Preshared Key: you must enter any set of numbers from 8 to 63. They also need to be remembered so that you can specify them when connecting to the network.
Click the button below Apply

Setting up an Internet connection

In the router interface, you need to select the tab on the left Additional options, in the list that opens, select WAN.

Setting up a PPPoE connection

WAN connection type: PPPoE
Get a WAN IP address automatically: Yes
Username: Your login according to the contract
Password: Your password according to the agreement
MTU: 1472
Save the settings with the button Apply.

Setting up an L2TP connection

WAN connection type - L2TP
YES
automatically- put a point on YES
Username and Password- login and password from the contract
VPN server -
The remaining parameters can be left unchanged. In the hostname, write something in English. Save settings.

Setting up PPTP (VPN) when automatically obtaining a local IP address

WAN connection type: PPTP
Enable WAN, Enable NAT, Enable UPnP - set it everywhere YES
Get an IP address and connect to DNS automatically- put a point on YES
Username: Your login according to the contract
Password: Your password according to the agreement
enter the IP address or name of the VPN server according to the contract
Save the settings with the button Apply.

Setting up PPTP (VPN) with a static local IP address

WAN connection type: PPTP
Get an IP address and connect to DNS automatically- put a point on No
IP address: We enter your IP address according to the contract
Subnet mask: We hammer in the mask according to the contract
Main gateway: We drive in the gateway according to the contract
DNS server 1: And DNS server 2: enter your provider's servers (Rostelecom Omsk DNS 1: 195.162.32.5 DNS 2: 195.162.41.8)
Username: Your login according to the contract
Password: Your password according to the agreement
Heart-Beat or PPTP/L2TP(VPN) server: enter the IP address or name of the VPN server according to the contract
Save the settings with the button Apply.

NAT when automatically obtaining an IP address (DHCP)

WAN connection type: Dynamic IP
Save the settings with the button Apply

Checking Internet connection status

Saving / restoring router settings

After setting up, it is recommended to save them so that if problems arise, you can restore them. To do this you need to go to the tab Additional settings, menu Administration;, Restore/Save/Load settings tab.

To save the current router settings, you must press the button Save. The settings file will be saved to the specified location on your hard drive.
To restore settings settings from a file, you must click the button Select file, specify the path to the settings file, then click the button Send.

Attention! Pressing a button Restore will restore factory settings!

How to connect and configure a router ASUS RT-N12 on one's own? In this instruction, I will show you step by step how to install Internet on it and distribute a WiFi signal without a disk. For those who have a different model, for example N10U, N14U, N56, N18, don’t worry. This Asus setup guide is universal for any router with the latest version of the interface design in black and blue.

How to connect the ASUS RT-N12 VP router correctly?

First of all, let's see how to connect Asus router to computer. I will not describe this procedure for a long time here. I will just name the main steps:

We take out the Internet cable from the network card of the computer and insert it into the WAN port on the Asus router
Instead, we connect the Ethernet cable to the PC, which was in the box along with the router
Insert the other end into the LAN connector

For those who doubt the correctness of their actions, I recommend reading. It describes in more detail the sequence of actions on how to connect the Asus RT-N12 router to a computer with a cable.

In it you will learn how to enter the control panel for configuration and at the same time avoid mistakes.

Computer settings for connecting to the ASUS RT-N12 VP router

Let's move on. Before you actually start setting Asus router, you need to make changes to the configurations of the network card of your computer or laptop. This is necessary in order to be able to access the board panel.

Namely, in the section “Network and Sharing Center - Changing adapter settings”

Here we find either an “Ethernet” connection or a “Wireless connection” - depending on how you are going to connect your PC to the router, via wifi or cable. Right-click on the desired type and go to “Properties”.

Next, open “Internet Protocol Version 4” and set all parameters to “Automatic acquisition”. If some data has already been registered here, then transfer it to paper - it will be useful for further setting up the router using the “Static IP” type.

Then we save the changes.

Setting up the ASUS RT-N12 VP router step by step

Now you can go directly to setting up the Asus RT-N12 router. We need:

Login to the admin panel
Change default password
Select the type of Internet connection
Specify parameters for the WiFi network

To go to the settings panel, open the browser and enter its IP address - where the entrance to the router is located. To authorize, enter the login and password admin/admin. How do I know them? They are used by default to enter the settings of the Asus router, and since we previously reset it with a “Reset,” I can say with 200% confidence that they will work.

The main page of the Asus Quick Setup Wizard will open. Click the “Go” button.

At the first stage, the software developer immediately takes care of access security - we change the router to the personal account.

After this, the firmware will independently try to determine your type of Internet connection:

Dynamic,
Static IP,
PPPoE
L2TP

You can find out it yourself from the contract with the provider. If the connection type is automatically determined correctly, then click “Next”. If an error occurs and a different one is specified in the contract, then click on “Internet Type” and specify it manually.

Setting up Asus for Beeline

The Beeline provider uses the type L2TP. Therefore, if you are their subscriber, then we select this particular type on the Asus router.

Username
Password
VPN server

They must be taken from the contract or obtained from technical support.

Internet connection Netbynet on Asus

Another popular provider, Netbaynet, provides services using the PPPoE, DHCP or Static IP protocols, depending on the client’s location.

Accordingly, you select the type indicated in your connection brochure. It is worth noting that with a dynamic IP (in Asus it is called “Automatic”), at Netbaynet you must check the “MAC Address Clone” checkbox

Since my Asus router is connected via the PPPoE protocol, then I need to enter authorization data.

How to set up a wifi connection on the Asus RT-N12 router?

After this, we proceed to setting up the Asus router for WiFi distribution - we set a name for the wireless network and a password for connecting to it.

In the last step, we check all configuration parameters and exit the Asus Quick Setup Wizard.

That's all, actually. To make it easier to enter the settings of the Asus router, I added the address 192.168.1.1 to the bookmarks bar of the browser - now you can quickly go to the connection settings without entering it manually each time.

If you want to change something in your router after the first connection, then the Internet settings are located in the “Internet” section

And the parameters for connecting to WiFi can be changed by going to the “Wireless Network” menu