Windows 10 remove login password. “Global login problems” or “How to remove the password from the computer? Removing a bios password

How to remove a password from a Windows 10 computer? Knowing this you can simplify the task of your login.

By default, desktop PCs and laptops that have Windows 10 installed require a password to be entered for their accounts or local accounts when enabled.

As a rule, this combination of password characters is selected during installation of the system to increase the security of confidential information stored on a computer that is shared with several users at once.

Therefore, if protection interferes, and you want to disable the Password prompt, you should use one of the options for setting up automatic Windows 10 boot to go directly to the desktop.

Pros and cons of passwordless login

The main advantage of passwordless entry is quick access to the system.

No need to remember passwords and spend time entering them; PEvery time you turn on your computer, this saves valuable time, and most importantly, you will never lose your password and access to your data.

Among the minuses, it is worth noting the simplification of access to a computer by other people - at home, for example, it can be children.

Removing a password

The principles of setting up Windows 10 login are not too different from the actions that are performed in previous versions - Windows 7 and 8.

At the same time, it is recommended to remove the protection of the entire system and individual accounts only in cases where only one person uses the computer.

If there are several users, it is worth leaving passwords on other accounts.

There are two main ways to remove the password in Windows 10:

• through the registry
• through accounts.

In addition, the password can be removed not only for the account, but also for the local record. And also - remove a similar function when exiting sleep mode.

The account method

Using Windows 10 accounts is the easiest option to reset your password. The main steps will be as follows:

• open the Run window by pressing the Win + R combination;
• enter one of the commands in the dialog box - netplwiz or control userpasswords2;
• press "Enter";

• select the required user in the account window that opens and uncheck the box requiring a username and password;
• click the "Apply" button;

• in the automatic login window, enter the previously set password twice to confirm your rights to remove it;
• click OK.

Advice! After completing all the steps, you should make sure that the checkbox for requiring a password has disappeared. Rebooting the system will allow you to finally check this.

Removing a password through the registry

In cases where automatic passwordless login cannot be configured for some reason, you should use the second option - the registry editor.

For this you need:

• open the editor using the "Run" window, called by the Win + R key combination;
• enter the regedit command;
• press the enter key;
• when a window appears asking you to make changes to the system, select the “Yes” option.

• in the registry, go to the "HKEY_LOCAL_MACHINE" section;
• open the subsections SOFTWARE, Microsoft, Windows NT, CurrentVersion and Winlogon in turn;

• find the DefaultUserName parameter in the right column of the editor, double-click on it and check if the name of the account for which the password is being changed is in the value field;
• select the parameter called “DefaultPassword” there or create it if it has not been created yet. To do this, click the "Create" button and select the "String parameter" value. Enter the password in the "Value" field;
• enable the ability to automatically log into the operating system by finding another parameter - "AutoAdminLogon". This value is zero by default and must be changed to one for passwordless entry.

After restarting your computer, Windows 10 should start without you having to enter passwords.

However, due to the complexity of this method and the possibility of modifying the registry, it is better to use the first technique first.

Disabling the password for local writing

Using a local account, which limits the user's capabilities, but is often necessary for a work computer, you can also remove the password when logging into Windows.

After that, even a system locked with the Win + L keys does not require a password. All that is required for this:

• launch a command line (requires login with an administrator account);
• enter the net users command and pay attention to how the username is displayed;
• repeat the input again using another command - “net user user_name”;
• press Enter.

After the command prompt is closed, the Windows 10 user is able to log in without using a password.

Removing the password to wake up from sleep mode

In addition to entering a password when logging in, the security requirements of Windows 10 lead to the need to request a fifteen-digit code when exiting "sleep mode".

However, on a home computer, such protection is practically meaningless.

And in order to get rid of it, you should use a special setting in the accounts menu.

To change the logon options, you must set the value to "never" in the section for choosing the time after which Windows asks for a password.

Now the exit from sleep mode will become passwordless and fast.

You can remove the password request when you turn on the temporarily blank screen in another way - using the "Power Options" item located in the control panel.

To do this, when setting up the power scheme, select the item for changing inaccessible parameters, change the value from "Yes" to "No" and click "Apply".

findings

By applying the methods of disabling the password, you will have at your disposal a system that does not require the introduction of a code.

Although, if it is possible for outsiders to access the computer, passwordless entry is not secure.

And the password is best left, as saving a few seconds of time is not worth the privacy breach.

Most Windows users to protect it from prying eyes. However, if you are the only user of your computer, then entering a password is an extra procedure that takes far from extra time. Below we will consider what methods are implemented to disable the password that authorizes in Windows.

Method 1: For all versions of Windows

1. Call the "Run" window by typing the combination of two keys Win + R on the keyboard. A window will open on the screen in which you will need to enter the command without quotes: netplwiz.

2. The account settings window will open, in which you will need to uncheck the option "Require username and password" . Save changes with the button "Apply" .

3. In conclusion, you only have to specify the password for authorization in the account twice, after which the password will be deactivated.

From now on, by restarting your computer, you will no longer be prompted for a password when logging in.

Method 2: for Windows 8, 10

1. Launch the "Options" window by pressing the two keys Win + I. In the window that opens, go to the "Accounts" section.

2. In the "Your Account" section, click the "Sign in with a local account instead" link.

3. In the window that appears, execute .

4. Without filling in any fields, immediately click the "Next" button.

From now on, when you start Windows, you will no longer be prompted for a password to authorize your account.

The question of how to remove a password in Windows 8 becomes especially relevant if you have lost access to your account. However, there may be several solutions to this problem, depending on the circumstances. Let's take a look at a few situations that users encounter most often.

Local account

The simplest situation is deleting the local account's security key.

As you can see, removing the passcode in Windows 8 is no more difficult than removing the administrator password in Windows XP. Now let's move on to more complex situations.

Login password

By default, Windows 8 checks the passcode at system startup. If you are tired of constantly entering the key, deactivate this feature.

Lost password

The ideal situations have been described above, in which you know the access code and simply do not want to enter it again when logging in. Now consider a more difficult and, unfortunately, common situation - the password is lost and you cannot access the system.

Microsoft account

If you're logging in with a Microsoft account (login is your email address), follow these steps to remove your password:

There will be three options for solving the problem:

After entering a new password, you will be able to access your profile without any problems. By the way, if you wish, you can completely delete your Microsoft account. True, in this case, you will lose access to some functions: for example, the application store will become unavailable.

Local account

To remove the security key that is set in the account settings, you will need an installation disk or a bootable Windows flash drive.

When you launch the login window, click on the "Ease of Access" link, which is located in the lower left corner. Alternatively, you can press the combination Win + U. The outcome will be one - the opening of the command line.

Type the command "net user login new password" and press Enter. If the username is more than one word, enclose it in quotation marks.

If you see error 8646 on the screen, it means that you are using a Microsoft account and not a local profile.

Conclusion

You can make your life a lot easier by creating a password reset disk in advance.

1. Connect the removable USB drive to your computer.
2. Press Ctrl+Alt+Delete and select "Change password".
3. Click on "Create Disk..."

The Reset Disk Creation Wizard will walk you through the steps step by step, resulting in a media that you can use if you lose your security key.

And the last thing: if you set a password on your computer in the BIOS, just disassemble the system unit and remove the battery from the motherboard, which is responsible for storing the settings. Wait a minute and then install the battery back: all BIOS settings, and with them the set access code, will be reset.

In Windows 10, as in previous versions of this OS, you can use special modes to shut down and quickly restore a session. For example, hibernation mode, which allows you to save everything that you did in this session and transfer the computer to reduced power consumption. At the same time, even if it is not possible to recharge the laptop or connect the PC to the network, the hibernation mode will save everything on the hard drive until it is turned on. But every time you turn it on, you are asked to enter your account password, which is very annoying if you are the only one using the computer. We suggest considering how to remove the password at login in Windows 10.

How to remove the login password in Windows 10. Method 1

The easiest way, which is suitable for all users, including beginners who have recently switched to the top ten.

This completes the steps of method number 1. Now we know how to disable the login password in Windows 10. Let's move on to the second way to disable.

How to remove the login password in Windows 10. Method 2

This option to disable password login is a little more difficult for inexperienced users, but not as complicated as it might seem. Let's use the keyboard and enter the combination Win + R. In the "Run" utility window, enter "Netplwiz":

In fact, there are a lot of ways to disable the password at login in Windows 10. You can even use the option through the registry, but in order for you not to accidentally do things in this segment of the system, we did not consider it. The above methods are the most optimal and everyone can choose the right one for themselves.

Please note that you must use a local Windows account with administrator rights to complete most of the instructions in this article.

How to put a password on a Windows computer

If other people have access to your computer, it is wise to protect Windows with a password. So your settings and data will be safe: without special knowledge, no one can view or change them. Windows will ask you for a password when you turn on your computer, change your account, or wake up from sleep.

1. Open "Start" → "Settings" (gear icon) → "Accounts" → "Login Options".
2. Click "Add" under "Password".
3. Fill in the fields according to the prompts of the system and click "Finish".

How to put a password on Windows 8.1, 8

1. In the right sidebar, click Settings (gear icon) → Change PC settings. In the menu of the window that opens, select "Accounts" (or "Users"), and then "Login Options".
2. Click on the " " button.
3. Fill in the fields, click "Next" and "Finish".

How to put a password on Windows 7, Vista, XP

1. Open the "Start" → "Control Panel" → "User Accounts" section.
2. Select the desired account and click "Create a password" or immediately click "Create a password for your account".
3. Fill in the fields using the system prompts and click on the "Create Password" button.

If outsiders do not have physical access to your computer, it may be better to disable protection. This eliminates the need to enter a password each time the system is started.

1. Use the key combination Windows + R and enter in the command line netplwiz(or control userpasswords2 if the first command fails). Press Enter.
2. In the window that opens, select the account for which you want to remove the password from the list, and uncheck the box next to "Require username and password". Click OK.
3. Enter the password, confirm it and click OK.

Windows will stop asking for a password only when you turn on the computer. But if you lock the screen (Windows key + L), log out, or the computer goes to sleep, the display will still ask for a password.

If the "Require username and password" option is not available, or if you want to completely remove the Windows password instead of disabling it, try another method for more advanced users.

To do this, open the account management section according to one of the instructions at the beginning of this article.

If the open section says you're using an online Microsoft profile (login with email and password), disable it. Then use the system prompts to create a local profile, but do not fill in the password fields during the process.

After you disable your Microsoft account, the system will no longer sync your settings and files across computers. Some applications may refuse to work.

If the local profile is initially active in the account management menu, then simply change the current password, leaving the fields for the new password blank.

When deleting an old password, the system will never ask for it until you add a new one.

How to remove the password when waking up from sleep mode

If you turn off the password prompt at Windows startup, the system may still prompt you for it on wakeup. But you can deactivate this feature separately with these instructions.

1. In the search bar in Windows, enter "Power Options" and click on the found link to the section with the same name. Or find it manually through the "Control Panel".
2. Click "Require a password on wakeup", then "Change settings that are currently unavailable" and check the box next to "Do not require a password".
3. Save your changes.

How to remove the password when waking up Windows XP

1. Open the "Control Panel" → "Power Options" section.
2. In the window that appears, open the "Advanced" tab and uncheck the box next to "Require a password when exiting standby".
3. Save your changes.

If you forgot your password and can't log in to your local Windows administrator profile, you don't have to reinstall the OS at all. There is a simpler way out: resetting password protection. To do this, you will need another computer, a USB drive, and a free password reset utility.

Create a bootable flash drive on another PC

1. Download the Lazesoft Recover My Password installer to any available computer.
2. Run the downloaded file and install.
3. Connect your flash drive to your computer. If necessary, make a copy of the files stored on it, since all information will have to be deleted.
4. Open Lazesoft Recover My Password, click Burn Bootable CD/USB Disk Now! and create a bootable flash drive using the program's prompts.

Boot your computer using a flash drive

1. Insert the prepared USB drive into the computer whose password you forgot.
2. Turn on (or restart) the PC and, as soon as it starts to boot, press the button to go to the BIOS settings. This is usually F2, F8, F9 or F12 - depends on the hardware manufacturer. Most often, the desired key is displayed on the screen during BIOS boot.
3. While in the BIOS menu, go to the Boot section if the system did not redirect you there immediately.
4. In the Boot section, install the USB flash drive in first place in the list of devices that appears on the screen. If you do not know how to do this, look around - there should be hints about the controls nearby.
5. Save your changes.

If the BIOS is also protected by a password that you do not know, then you will not be able to reset Windows password protection using Lazesoft Recover My Password.

Perhaps, instead of the classic BIOS, you will see a more modern graphical interface. In addition, even in various older versions of the BIOS, the settings may differ. But in any case, the procedure will be approximately the same: go to the Boot boot menu, select the desired USB drive as the source and save the changes.

After that, the computer should boot from the flash drive on which the Lazesoft Recover My Password utility is written.

Reset password in Lazesoft Recover My Password

1. Select Lazesoft Live CD (EMS Enabled) and press Enter.
2. Reset your account password with Lazesoft Recover My Password tips.
3. Reload.

After these steps, Windows will stop asking for the old password, and you can set a new one according to the instructions at the beginning of the article.