Broadcast channels dvb t2. Frequencies of digital television channels DVB-T2

So, if you are interested in the topic of digital terrestrial television, then most likely you want to know what channels you will get if you connect it to yourself. Am I right? Then read on) maybe you don’t need it?

What are digital TV multiplexes?

Today in Russia 20 channels broadcast in DVB T2 format. They are divided into two packages, these are the so-called multiplexes. Both packages are free to view and there are no subscription fees. It is enough just to have a TV that receives a DVB T2 signal and.

This is what “digital” says in Russia

The first ten channels (First multiplex)

The first package, or the first multiplex, is general information, news and development channels (boring). Here is the list of digital television channels of the first multiplex:

Channel One
Russia 1
Russia 2 Match TV - channel with sports broadcasts
Channel 5
Russia "Culture"
Russia 24
Carousel – children's channel, cartoons, programs for children
OTR – Public Television of Russia

The first multiplex works wherever there is digital television.

It was not in vain that I wrote the time of publication of the article. The fact is that sometimes the composition of channels changes based on a competition held by the state every year. So in 2016 everything may change.

Just recently, a change took place in the second multiplex and “Sport+” was replaced by the entertainment channel “Friday”... Also, the channel “Russia - 2” in the first multiplex was replaced by Match TV.

Third channel package (Third multiplex)

And yet, they promise a third multiplex, only it will have a subscription fee. So I don't think it will be wildly popular. Since, as soon as digital broadcasting becomes paid, it will be easier to install a cable with 40+ channels for 120 rubles. per month.

And here is what they write about the project about this:

It is still too early to talk about the exact start date of broadcasting of the third (regional) multiplex. To begin with, the principles of forming a regional multiplex must be determined at the government level, after which competitions will be organized to determine the participating channels of the third multiplex. Only after the composition of the third digital package becomes known will RTRS be able to begin broadcasting it. Let us note that this fall the Government Commission for the Development of Television and Radio Broadcasting postponed consideration of the issue of the principles for the formation of the third multiplex until 2018.

After the advent of digital television, a large number of users became excited about the transition to a modern format. What are the reasons? Of course, in the desire to try a new product, as well as frequent discussions that the quality of the incoming signal is much higher. Accordingly, this improves the picture quality. Ease of access also attracts new users.

Digital TV can be connected even to CRT models. To do this, you will need to use additional devices. And of course, modern TV models are capable of catching this technique.

In the Moscow region and the capital, the well-known television and radio network Ostankino offers a huge number of on-air channels in the public domain. This allows you to receive a signal without additional registration and fees for Russian television programs. Reception is available both on individual antennas located in the room and on external ones.

There are also paid channels that charge a certain amount each month. How many channels are there on digital television today 2018? What is needed to receive their signal? More on this later.

Digital signal reception methods

There are four options for connecting free and pay TV channels:

Cable. In this case, the signal is received via cable. The main disadvantage is the subscription fee. This method is not available everywhere.
Satellite. Here, the signal is transmitted via satellite and received through an installed personal dish. There is also a specific subscription fee charged here. Requires the purchase of equipment designed for satellite TV.
Terrestrial (DVB television). Terrestrial repeaters distribute a signal that can be received by an indoor or outdoor antenna. This connection option does not require additional financial expenses. A convenient way to watch TV programs in modern broadcast format.

The digital set-top box (Dvb T2) picks up channels differently than the previously described option. The signal level is low. It is difficult to catch it in case of bad weather, as well as its location far from the TV tower.

The lowest price is receiving digital TV using an antenna, which is installed and configured independently by the user. You can add various channels.

What are multiplexes

Multiplex is a connection in one digital package of different TV channels during digital television broadcasting, combined before transmission over the channel and separated at the final receiving element (subscriber's receiver) with the allocation of 1 or 2 TV channels.

Digital television in Russia in the DVB T2 format offers 20 TV channels, which are divided into 2 packages, this is called multiplexes. These are free to watch digital channels - there is no set subscription fee. The user only needs a TV; a set-top box with a decoder that receives the DVB T2 frequency range (if such a decoder is not available on the TV) and an antenna.

Package No. 1 is a group of information, news and development channels (Russia 1 and 2, 1 and 5 channels and others).

This package operates wherever digital television is present. If there is a working digital TV tower nearby, you will most likely receive all 10 channels. The user will be able to catch either all 10 at once, or not just one. The reason for this is that channels 1 of the multiplex are transmitted at the same frequency. Broadcasting is carried out at a frequency of 546 MHz using DVB-T2.

Quite often the composition of channels in this package changes. Competitions are held among programs, as a result of which the list may differ. Frequency 498 MHz with DVB prefix.

Package No. 3 is in development, but it will be paid. A cheaper and simpler option is to use cable and get more than 100 channels from 200 rubles per month.

This package will work in test mode. In it, users will also be able to find programs of maximum HD clarity.

What you need to view

To show digital television channels, special equipment is required:

Antenna;
Set-top box for digital television or TV with a DVB T2 tuner. The device must support the MPEG 4 standard and be capable of operating in Multiple PLP mode.

As for the antenna, you can opt for a standard analog one. If you have a new model TV, then it may have an integrated digital tuner. In this case, there is no need to buy a set-top box.

If you don't know if your model has , check the technical data sheet. Alternatively, enter the model name in the search engine.

There are two types of antenna devices:

Active - when amplifiers are used, a connection is made to a source of electrical energy. When using a receiver, 5-V is supplied through it. This can be done through the settings in the menu – “Antenna power”. Using an active device is not always the right decision. Since if you are close to the tower, the signal may disappear completely.
Passive - there are no additional amplifiers here. They are used most often in areas with a stable signal. This option is easier for connecting several TVs.

Let's consider the features of choice. Anyone who encounters such a purchase for the first time most likely thinks that all consoles are identical. The main condition for making the right choice is to avoid making mistakes in key technical characteristics.

There are other points that can affect the further operation of the equipment and the breadth of the functional component:

There are no buttons on the external panel of the device - this obliges the user to work only with the remote control. This is not always practical.
If the tuner does not have a USB port, the device cannot be used as a media player. If such equipment is present, you can record TV shows, view photos and videos.

Please note that a set-top box with a separate power supply is considered a chic option. Most often, this element is built inside. The most common cause of tuner failure is a malfunction of the power supply. If this device fails, you can take it to a service center or replace the entire set-top box. But a separate unit is an opportunity to replace the component without any problems.

Dear readers of the NskTarelka.ru blog, our country is slowly but confidently moving from on-air analogue broadcasting to digital on-air broadcasting.

If a signal is already broadcast in your region, all you have to do is purchase a TV with a built-in DVB-T2 tuner, or a digital set-top box that supports the DVB-T2 standard, configure the channels and enjoy watching without ripples or interference.

How many channels does the digital set-top box show?

The number of channels available for viewing does not depend on the choice of digital set-top box model. How many channels on digital terrestrial television will be available for viewing depends on your location and nearby digital television repeaters transmitting the signal.

At the time of publication of the article, two packages of channels are broadcast from transmitters via VHF (ultra-short waves) waves on the decimeter range - RTRS - 1 (first multiplex) and RTRS - 2 (second multiplex).

The number one task is to make it accessible to watch terrestrial digital television almost throughout Russia. And since our country is vast, priority is being given to broadcasting the first multiplex on the repeaters being built and existing television towers. State guaranteed package

The second multiplex does not broadcast everywhere. And it will be connected one by one, starting with larger settlements and moving to less populated ones.

The repeaters closest to you and available multiplexes can be viewed on (digital terrestrial television). If the RTRS - 2 package is not yet broadcast, you can find out the approximate launch date of the second multiplex at advisory support center.

RTRS package - 1 (the first multiplex) consists of 10 channels, the second multiplex also contains 10 television channels. Accordingly, based on the situation, you will have access to either 10 or 20 channels of digital terrestrial television.

List of channels package RTRS - 1 (first multiplex)

All channels of the first and second multiplex are broadcast free of charge.

RTRS channels - 3 (third multiplex)

The third multiplex will not be launched in Russia soon. Not at all soon, I’d better deal with the second one.

In this regard, Crimea is lucky. The third multiplex is already broadcast there. This opportunity arose due to the fact that before the transition of Crimea to Russia, repeaters on the peninsula were equipped by the Ukrainian side to broadcast four multiplexes.

And at the end of the article, a short tour of Tokyo Skytree. A stunning view of Tokyo from the tallest TV tower in the world (Tokyo Skytree is 634 m high) accompanied by a pleasant song.

TV), it's time to move on to the most important part - setting up digital television. How to set up digital television yourself? Read more about this.

I will show the example of a receiver Mystery MMP-71DT2, and like me, his software is completely identical to Rolson. If you have a different console, the principle will be the same, but you may have to look at the instructions.

How to connect everything

First, let's connect antenna to the receiver, and the receiver to the TV. Preferably through, so the image quality will be as clear as possible. If there is none, then through ordinary “tulips”, they usually come complete with the console. Look at the connectors in the instructions, you will get something like this. If the antenna has an amplifier, first turn it off, then you can always turn it on.

We launch all this equipment, set-top box, antenna, TV. Select the desired video input. If everything is done correctly, you will see a start menu like this:

How to set up digital television through “auto search”

By default, the set-top box is not configured for anything, and you yourself will need to catch the channels that are broadcast in your region. The easiest way is to run an auto search.

After launching the auto search, the set-top box will think for a long time, and should find something in the end. Important: since each one is transmitted at the same frequency, you will catch channels not one at a time, but in packs of ten at once. So be patient. If in analog TV channels are caught one at a time, then a few minutes may pass, and the set-top box will search. But then all 10-20 channels will pop up immediately.

After the search is over, the set-top box will prompt you to add the found channels. If you find all 20 pieces, congratulations, the process is complete!

List of tuned channels, TV Guide function

How to check signal quality when setting up digital TV

Check that the signal is strong enough and everything is set up well.

It's very easy to do. You should have an INFO button on your set-top box; pressing it three times displays data on the quality and intensity of the signal. Look in the instructions, it may be called differently, but it will do the same thing:

The higher the signal, the better. Optimal - from 60% onwards

If both indicators are high, above 60%, everything is fine.

Check on both multiplexes, say, on Channel One and TNT.

Since different multiplexes are transmitted, you can catch the first one well, and the second one poorly, or vice versa. Your task is to rotate the antenna so that both are caught well.

But in practice it happens a little differently. For example, you can catch duplicates. When identical channels will occupy several places at once. It doesn't seem critical, but it's annoying. How to treat, I.

What to do if you caught duplicates or didn’t catch anything

The second option is when not everything was caught, or nothing was caught. Fine tuning and manual mode will help us here. We read about it. However, if you live in a city and there are towers near you, then in 90% of cases an auto search is enough for you.

To sum it up

As you can see, setting up dvb t2 digital television with your own hands is not a difficult task. And you certainly shouldn’t call a specialist who will do the same thing for you for a thousand rubles)

A package of channels broadcast on the same frequency is called multiplex. The number of channels in one multiplex can be from 1 to 10. The composition and number of channels is determined by the broadcaster, for example, the state.

There are now 3 multiplexes operating in Crimea so that they do not interfere with each other, as in analogue broadcasting, in each region broadcasting is carried out on different frequencies (CHANNELS).

DVB-T2 broadcasting in Russia, Ukraine and a number of other countries is carried out only in the decimeter frequency range - these are from 21 to 69 UHF (UHF) channels.

List of transmitters and frequency channels broadcasting in Crimea

Alupka – 21, 30, 43 (Lenin St. 64)

Alushta – 30, 32, 56 (Sergeeva-Tsensky St. 13)

Annovka (Belogorsky district) – 22, 32, 41

Belogorsk – 36, 37, 58 (Nizhnegorskaya St. 33a)

Dzhankoy – 24, 28, 30 (Kraynyaya St. 20)

Evpatoria – 23, 29, 32 (Razdolnenskoe highway 17)

Zavodskoye (Leninsky district) – 27, 26, 30

Kerch – 24, 41, 43 (Ordzhonikidze 144)

Kirovskoe (Chernomorsky district) – 21, 24, 40

Krasnoperekopsk – 24, 31, 43 (Tavricheskaya 105)

Parthenite – 26, 27, 37

Sevastopol – 30, 40, 47 (96 Pobeda Avenue)

Simferopol – 36, 37, 51 (Studencheskaya st. 14)

Sudak – 32, 49, 60 (Eastern Highway 33)

Feodosia – 26, 27, 30 (Simferopol highway 45a)

Foros - 21, 43, 44 (Cape Sarych)

Yalta – 26, 35, 37 (Yuzhnoberezhnoye Highway 55)

To receive DVB-T2 you need (preferably) an external decimeter television antenna without an amplifier with a modern cable with minimal signal attenuation in it. It is possible to use all-wave antennas. More often than not, an antenna with a good cable receives a signal better than an antenna with an amplifier and an old cable. The use of the Soviet RK-75 cable is not allowed; such a cable was not designed to receive signals in the UHF range, so it has high signal attenuation.

It also happens that in the same locality, for example, Nikolaevka, Zuya, depending on the place of reception, reception can be carried out from different directions. So, on one side of the lowland in Zuya, the signal can only be received from Simferopol, and on the other side of the settlement only from Belogorsk.

If reception is carried out outside the line of sight of the direction to the transmitter, then the maximum signal is possible even in the opposite direction from the transmitter. In this case, the reflected signal is received. To determine the ideal orientation of the receiving antenna, select the manual channel search mode on your TV or set-top box, then enter one of the channels (preferably with a lower number from the list above) from the transmitter from which you want to receive the signal. Now you can see the scale of the received signal level and orient the antenna according to it.
Rotate the antenna 5-10° in any direction, count to 10 in your head, and record the signal strength. Rotate the antenna another 5-10° in the same direction
(further) and again count to 10 and record the level of the received signal. Thus, rotate the antenna a full 360° around its axis.
After this, you will see from your recordings from which direction the maximum signal is coming.

With the advent of the era of digital terrestrial television, many subscribers of cable and satellite networks began to increasingly think about connecting free broadcasting. Indeed, according to the Federal Target Program on the development of a digital broadcasting network, more than twenty television channels in excellent quality absolutely free. Which includes mandatory federal television channels.

The question arises - how to connect digital terrestrial television at home?

There's nothing complicated about it. To receive digital terrestrial television you will need any standard subscriber equipment DVB-T2/MPEG-4 with mode support Multiple PLP and UHF antenna ( DMV) range. The antenna can be either collective (installed on the house, also called a common antenna) or individual, installed directly in your house or apartment. Depending on the distance to the transmitting center, you must select the desired antenna. They are divided into active (with an amplifier) and passive. When purchasing an antenna, you can first check the power of the transmitting equipment installed in your region and the distance to the transmitting center. Based on the data obtained, select an antenna.

Approximate coverage radius of transmitting stations:
10 W– about 3 km;
50 W– about 5 km;
100 W– about 15 km;
500 W– about 25 km;
1 kW– about 30-35 km;
2 kW– about 35-40 km;
5 kW– about 40 – 50 km.

Let's move directly to the reception equipment. Three main groups can be distinguished: televisions with a built-in DVB-T2 tuner, set-top boxes of the same standard, and digital computer DVB-T2 tuners. Their settings are similar, if not the same.

Video: how to set up DVB-T2 digital terrestrial television

It is best to connect a digital terrestrial set-top box according to the manufacturer's instructions; it is practically impossible to make a mistake there. You can also watch the official video from RTRS:

A few recommendations, also from RTRS:
connect the antenna cable plug and, if necessary, the digital set-top box to the TV;
enable automatic channel search - the TV will tune to the corresponding digital terrestrial channel; when tuning to a channel in manual mode, you must specify the channel frequency (for example, 35 TV channel, 685 MHz);
Most digital TVs (and set-top boxes) have a built-in signal level and quality indicator, which will allow you to optimally configure your antenna to receive a digital terrestrial signal (see the operating instructions for the TV).

On TVs with a built-in DVB-T2 tuner, all manipulations are carried out through the TV menu. There shouldn't be any difficulties there either.

We recommend updating the software of your subscriber equipment to the most current one. This can be done in specialized services, or yourself (if you are confident in your abilities). The software can usually be downloaded from the manufacturer's official websites.

Frequencies of DVB-T2 digital channels:

21st television channel- reception frequency 474 MHz;
22nd television channel- reception frequency 482 MHz;
23rd television channel- reception frequency 490 MHz;
24th television channel- reception frequency 498 MHz;
25th television channel- reception frequency 506 MHz;
26th television channel- reception frequency 514 MHz;
27th television channel- reception frequency 522 MHz;
28th television channel- reception frequency 530 MHz;
29th television channel- receiving frequency 538 MHz;
30th television channel- reception frequency 546 MHz;
31st television channel- receiving frequency 554 MHz;
32nd television channel- receiving frequency 562 MHz;
33rd television channel- receiving frequency 570 MHz;
34th television channel- receiving frequency 578 MHz;
35th television channel- receiving frequency 586 MHz;
36th television channel- receiving frequency 594 MHz;
37th television channel- receiving frequency 602 MHz;
38th television channel- receiving frequency 610 MHz;
39th television channel- receiving frequency 618 MHz;
40th television channel- reception frequency 626 MHz;
41st television channel- reception frequency 634 MHz;
42nd television channel- reception frequency 642 MHz;
43rd television channel- reception frequency 650 MHz;
44th television channel- receiving frequency 658 MHz;
45th television channel- receiving frequency 666 MHz;
46th television channel- receiving frequency 674 MHz;
47th television channel- receiving frequency 682 MHz;
48th television channel- receiving frequency 690 MHz;
49th television channel- receiving frequency 698 MHz;
50th television channel- reception frequency 706 MHz;
51st television channel- reception frequency 714 MHz;
52nd television channel- reception frequency 722 MHz;
53rd television channel- reception frequency 730 MHz;
54th television channel- reception frequency 738 MHz;
55th television channel- reception frequency 746 MHz;
56th television channel- reception frequency 754 MHz;
57th television channel- reception frequency 762 MHz;
58th television channel- reception frequency 770 MHz;
59th television channel- reception frequency 778 MHz;
60th television channel- reception frequency 786 MHz;
61st television channel- reception frequency 794 MHz;
62nd television channel- receiving frequency 802 MHz;
63rd television channel- reception frequency 810 MHz;
64th television channel- reception frequency 818 MHz;
65th television channel- reception frequency 826 MHz;
66th television channel- reception frequency 834 MHz;
67th television channel- reception frequency 842 MHz;
68th television channel- reception frequency 850 MHz;
69th television channel- reception frequency 858 MHz.

Let us clarify that the standard equipment DVB-T is not compatible with DVB-T2 standard equipment.
You can ask questions about broadcasting digital terrestrial television by calling the toll-free number of the RTRS unified information center 8 800 220 2002 .

Digital terrestrial television channels (DVB-T2 standard)

Channel One;
Russia 1;
Match TV;
NTV;
Channel 5;
Russia-Culture;
Russia 24;
Carousel;
OTR;
TVC.

Ren-TV;
Saved;
STS;
Home;
TV3;
FRIDAY;
Star;
World;
TNT;
MuzTV.

These channels are open and broadcast absolutely free.

When a new level of data transmission quality appeared, the DVB-T2 digital television network was launched. Digital television provides high quality pictures and an excellent transmission signal. But to set up a connection to this network, you need to have the necessary knowledge, choose the right receiver and configure it well.

How to connect the T2 module and configure it will be described below.

How to connect a T2 set-top box to a TV

The T2 tuner is quite easy to connect to your TV. If you have experience connecting players, antennas and other devices to your TV, then connecting the receiver will not be difficult.

We connect the antenna to the receiver, and from it we connect the wires to the TV. This can be done using standard HDMI, tulip or SCART cables. The most important thing is that you don’t have to pay to call a specialist. However, if the master can connect the set-top box to the TV for free, then it’s worth leaving the matter to him.

How to connect DVB-T2 to a TV without a set-top box

To connect your TV directly to the DVB-T2 network without purchasing a receiver, you can immediately purchase a TV with a built-in DVB-T2 tuner. This saves space, time and costs. Among other things, you can control T2 channels with one TV remote control, while the receiver will have two remote controls.

Today, almost all LCD TVs have a built-in tuner, which makes connection easier. Simply insert the antenna into the desired socket.

How to set up DVB-T2 using a receiver

After installing and connecting the receiver, you need to set up the television. To do this, follow simple steps:

We go to the console menu.
Click “Quick setup”.
If the default is another country, then set it to “Russia”.
Then you must select the “DVB T2” standard. It often appears in the DVB T/ DVB T2 standard field, which leads to the receiver looking for DVB T quality channels, and only then DVB T2. We need DVB T2 and its excellent quality.
Then click “Auto Configuration” and everything will be done automatically.
After finding the channels, you can also view detailed information on the quality of communication by clicking the “Info” button.

This way you can configure the receiver to receive all the channels you need. But the setup does not always go smoothly. Sometimes problems arise.

What to do if DVB T2 setup does not occur

There are several options why the setup does not occur:

The problem is in the receiver;
The problem is in the antenna;
The problem is with the TV.

First, try setting up using a different antenna. If it helps, then the problem is in the antenna, and if not, then the receiver is to blame.

If the antenna is to blame, then only a specialist can help. If the receiver, then several options are possible. Firstly, the receiver may have incorrect firmware. Then you need to reflash the console. To do this, go to the manufacturer’s website, download the new firmware, write it to a flash drive and insert it into the receiver. It will update itself and the problem will be resolved.

If updating the firmware does not help, then the problem is most likely in the electronics. In this case, it is better to return the set-top box for service or replace it under warranty.

You can also check the TV itself. To do this, use the set-top box on another TV, and if it works, then the problem may be in the TV settings. In this case, you should contact the manufacturer. There they will be able to tell you how to correctly set the TV settings to connect the receiver.

How to choose a set-top box for DVB-T2

The choice among receivers is quite large. Here are the most popular receivers that are recommended to buy:

Trimax TR-2012HD
Strong SRT-8500
Strong SRT-8502
Thomson THT702
Trimax TR-2012HD PVR (TR-2013HD PVR)

Their price starts from 1000 rubles and above, depending on the functions. More expensive receivers have more fine-tuning options, a better reception signal, more different inputs for connecting additional devices, and they also work faster. Compared to satellite set-top boxes, the DVB-T2 receiver is inexpensive.

You can also go to any hardware store and there, on the spot, choose a new receiver, after consulting with a specialist.

The introduction of terrestrial digital television of the DVB-T2 standard on the territory of Ukraine has made it possible to significantly expand the areas of reliable reception of the signal from television towers, in comparison with the analog signal. Also, the ease of setup and installation of T2 did their job; they became much more popular than satellite television with MFA channels.

Let's move on to the practical side and talk about the direct installation of all the equipment necessary to receive DVB-T2. Many modern TVs are already equipped with an integrated DVB-T2 receiver; in this case, it is enough to find out the position of the repeater, point the antenna at it and scan the available channels using the TV. In the case of a simple TV, installation and connection of T2 occurs somewhat differently, we will now discuss it. To install T2 in the standard version you will need:

Digital DVB-T2 receiver , the form factor you need, for example for hidden installation with a remote IR sensor, etc. The choice is now huge, there is practically no significant difference, everyone can choose for their needs. Practice shows that it is worth purchasing from a reliable store with a guarantee; we suggest you buy a receiver from our partners, who will provide you with service, warranty and repairs.

Buy MINI DVB-T2 digital set-top box with delivery from China

UHF antenna , in practice, so-called “Polish antennas” are often used, you can also purchase an antenna manufactured by Konvalia, Margoon, etc., you just have to take into account that the antenna must be taken with a gain margin, so as to predict how the signal will be received in a particular case hard to say. It is also desirable that it contains an amplification board that can receive power from both from and from an external power supply.
Cable, regular TV , almost any will do, but it’s better to take one with a braid filling percentage of 50% or more.
RCA or HDMI cable for connecting the receiver to the TV , may be included or must be purchased separately.

Connecting digital T2 using the example of the World-Vision T38 receiver

First you need to install the antenna, if it has not been installed before. It’s probably stupid to advise anything here, I’ll just say that follow the manufacturer’s recommendations, and at least first turn it in the required direction. You can find out which direction to point the antenna by looking at neighboring antennas or calculate the direction, for example, using Google or Yandex maps.

Connecting a T2 digital receiver to an antenna will also not cause much difficulty; the manufacturer and standardization make this process simple and it’s quite difficult to make a mistake.

When connecting, it is difficult to confuse something, the RCA cable is easy to connect, you just need to follow the color on the plug and on the socket, yellow to yellow, white to white, red to red. The antenna connector also will not allow you to connect other plugs to it; in this receiver model it is located on the left edge. It is also possible to connect via HDMI, everything is simple here, the COAX connector is used to connect a digital audio amplifier and is practically not used in standard configurations.

After all the cords are in place, we connect the last one - the power supply connector, for this model it is located on the side panel.

At this point, the connection of the T2 receiver is almost complete. Next, you need to turn on the TV and receiver. By pressing the “AV-TV” switch button on the TV remote control, we switch from the antenna socket to the “tulips”; on newer TVs, we select the input to which the receiver is connected. The following should appear on the screen:

The receiver will restart and a menu will appear with searching for channels and setting the initial parameters of the receiver:

We select the parameters and click “Auto search”, the receiver will scan and display the found channels.

If not all channels are found or there are none at all, adjust the antenna and repeat the search from the receiver menu until the number of channels and reception quality satisfy you. Enjoy watching!