How to turn on and off safe mode in Android - a guide to action. How to Enter Safe Mode on Samsung Galaxy S3

Let's use an example to figure out how to boot a Samsung phone in safe mode. The article is not only text, but there is also a video of the process.

Safe Mode allows you to boot your phone or tablet without downloading the apps you have installed.

Those. Only factory-installed applications will work. At the same time, all contacts, photos, videos and other information will not disappear anywhere.

We proceed step by step:

• Turn off the phone completely
• Turn it on
• When Samsung appears, press and hold the volume down key until Android loads completely.
• The corresponding message “Safe Mode” should appear at the bottom left of the screen.

To return to normal mode, simply restart your device and after booting, the “safe mode” sign will disappear and your installed applications will appear again.

Video on how to turn on Samsung in safe mode

Why do you need safe mode on Android?

As mentioned at the beginning of the article: safe mode does not load the applications you have installed.

This will allow:

• Check which applications are interfering with Android (freezes, glitches, reboots, etc.). Then you will be able to understand whether you need to remove the applications or whether this is a hardware problem and you need to contact a service center.
• The battery on your smartphone is draining quickly due to some installed application that is “guzzling”.
• When necessary, which can block Android operation and demand money or access from you.

This article will teach you how to disable Safe Mode on your Android device. You can find a solution to the problem of constant rebooting with activated safe mode. We have covered 7 ways to reset safe mode, problems that may arise and what to do if nothing helps. Detailed instructions that will solve the problem in 9 out of 10 cases.

Sometimes situations arise when a phone or tablet on Android needs to be loaded not in normal mode, but in safe mode. For example, when it starts to freeze and glitch. In such a situation, safe mode is used as a diagnostic tool. In most cases, putting the gadget into safe mode allows you to find and solve the problem, but sometimes it doesn’t. About 5-10% of users experience a situation where they cannot return to normal mode and the phone constantly restarts with safe mode active.

Safe Mode on Android - why is it needed and how to enable it

Safe mode is needed when, as a result of tampering with the firmware or operating system, a system failure occurs and the phone does not work correctly, crashes, graphic artifacts or severe slowdowns appear. If you switch the device to this mode, only system applications will launch and the functionality of the gadget will resume.

If you are looking for an answer to the question of how to disable safe mode on Android, then you have encountered one of the problems described above. You entered “safe mode”, after which you tried to enter normal operating mode and were unable to do so. To carry out this operation, use one of the methods listed below.

Removing safe mode using Android

To understand whether Safe Mode is enabled or not, look at the lower left corner of the screen. It should display a darkened rectangle with the appropriate inscription. If it is not there, do the following:

1. Through the menu, open a window that displays a button to turn off, restart, or put the phone in airplane mode. Or hold down the device's power key for a few seconds until the desired window appears;
2. Press the “power off” button and hold until the message “switch to safe mode?” appears. All third party applications will be disabled...”

If this message appears, it means the phone is in normal operating mode and you do not need to turn off safe mode. If it doesn’t appear, it means your phone is loaded in safe mode. To disable “safe mode”, simply reboot your device.

Turn off Android safe mode using a combination of buttons

Sometimes rebooting does not help and the gadget constantly boots in safe mode. Most often this happens due to a failure of factory applications that are configured to autostart. On some phones, “safe mode” can be disabled as follows:

1. Turn off the device;
2. Press and hold the volume button (down) and the power button. Hold both keys until the phone enters Recovery. Now remove the battery and try to turn on the device;
3. If everything went well, the gadget should boot in normal mode.

Advice: Do not use this method if your volume button does not work or is stuck. Otherwise, the phone will always boot into safe mode. After that, only flashing will help.

Open the system “settings” application. Go to the “Backup and Reset” or “Backup and Reset” section. Click the “factory reset” button. Wait until the device is restored to its default state and reboots.

If you are unable to reboot in “safe mode”, use the following instructions:

1. Turn off the device;
2. Simultaneously press the volume down button (on gadgets from Prestigio, HTC, Motorola, Huawei, LG) and the on/off button. If you need to turn off safe mode on Android on Samsung, hold down the “Home” button and the volume up button;
3. Wait for Recovery to download;
4. In the menu that appears, select “reboot” or “reset device” or “erase data” (it varies on different firmware);
5. Use the sound adjustment keys to select this item and confirm by pressing the power button.

After this, your gadget should reboot and the settings should be reset to factory settings. Do not try to turn off or remove the battery until the bare version of Android has loaded, otherwise the device will have to be reflashed or taken to a service center.

Other ways to turn off safe mode in Android

If the above answers to the question of how to remove safe mode on Android did not solve your problem, try using other methods that sometimes help:

• Remove the battery and reinsert it after a few minutes. It is possible that safe mode is not disabled due to the fact that information about it is stored in short-term memory, which is responsible for temporarily storing the current time, date, time zone after removing the battery;
• Remove recently installed applications. The problem with disabling Safe Mode may be due to a glitch in one of the apps you recently downloaded. This is rare, but it does happen sometimes;
• Remove applications that load into RAM immediately after downloading. In most cases, they are the reason why it is impossible to exit safe mode. Uninstall such programs and try rebooting your device. You can determine which application caused the problem “at random” - erase the software one by one until you achieve the desired effect.

Not a single method of returning to normal mode helped? Take the gadget to a service center or change the firmware yourself. Most likely, your phone's firmware has crashed. It sometimes happens after an update, after installing an unofficial firmware version, after obtaining root rights and incorrect modification of system files, etc. In this case, it will not be possible to roll back the changes without a computer and replacing the firmware.

3 more useful articles:

A new smartphone or tablet based on Android always works without failures or glitches. But what to do if, in further use, the device suddenly “slows down”, its speed slows down, applications do not work correctly, the sensor reacts unstably? Such problems can be resolved by enabling Safe Mode. On a device running Android, Safe Mode will make it possible to determine why problems are occurring.

If the phone works normally in safe mode, then “glitches” with it occur due to some application.

How to enable: 3 ways

Of all the inclusion methods, the most relevant, perhaps, are the following:

Method 1

Method 2

1. Turn off your phone.
2. When an inscription corresponding to the name of the smartphone brand or the inscription Android appears on the display, you must press the volume up button.
3. In this case, after turning on, the words “Safe Mode” will appear at the bottom of the screen.

Method 3

If the above methods do not work, then try this:

1. The device needs to be turned off.
2. While booting, hold down the Volume Down button.
3. After this, safe mode will be activated.

Note: in some versions of Android, to switch to Safe Mode, you need to restart your smartphone manually, and when the operating system logo appears on the screen, you need to press the volume up and down buttons and hold until the device boots completely.

How to disable: 2 options

No less pressing is the issue of disabling safe mode. Before this, you need to restart the device, and then use one of the suggested options.

First shutdown option

1. The phone turns on, after rebooting, Safe Mode is automatically disabled.
2. If safe mode is not automatically reset, you need to uninstall the last application that was installed; to do this, select Settings from the application menu.
3. When you select this application, you will be offered the Delete option. This is precisely the point that needs to be touched upon.
4. After completing these steps, reboot your device.

Second shutdown option

If the first method did not give the desired result, then you can try the second method - resetting to factory settings:

1. First, you need to select Settings from the menu, and in the menu that opens, tap Backup and reset settings.
2. In the proposed menu, select Reset to factory settings, then Reset smartphone/tablet.
3. Delete everything. After this, the device will be as good as new. But, keep in mind that all installed applications and personal data will be deleted. Only the factory settings installed by the manufacturer will remain.

Thus, Safe Mode loads only the required number of programs and utilities, only the necessary components. It is for the security of user data that the manufacturers developed the above mode, and applications will only work those installed by the device manufacturer. All other programs that were installed by the user themselves may pose some threat and will therefore be disabled.

Even if serious problems occur in the phone, and in standard mode it no longer performs its basic functions, it can still work in safe mode. For example, if the battery starts to discharge too quickly or the call button does not work, before sending such a device for repair, you can check its functionality in this service mode.

The Android platform is democratic and allows the user to make changes to system files, which is fraught with consequences, such as unstable operation of the device or termination of access to applications. To identify and troubleshoot problems, developers have created the ability to turn on the phone in safe mode, when only pre-installed applications are opened. Read our article about how to boot your phone or tablet into safe mode.

How to enter safe mode on Android before 4.1

On a smartphone with a version lower than 4.1, you can enable safe mode in two ways.

First way

Video: how to start your phone in safe mode on Android up to 4.1

Second option

Turn off and on your smartphone, and when you see the manufacturer’s logo, press and hold the “Menu” button until the main screen appears.

How to enable safe mode on Android 4.1 and higher

In versions of Android 4.1 and higher, rebooting into safe mode occurs at the moment of shutdown. Sequence of actions:

If the above method does not work, try repeating the steps, but after the menu appears, hold down the “Reboot” item for two to three seconds. On devices flashed with MIUI, to enable safe mode, you need to turn off the device, and when turning it on, press and hold both volume keys and the power button at the same time. Once the logo is displayed, you can release the Power key.

Video: how to enter safe mode on Android above 4.1

Smartphones with a special transition to Safe Mode (table)

If standard methods for activating protected mode do not work, your smartphone or tablet may need to be rebooted in a special way. Study the table below and try non-standard solutions.

The standard way to return to normal mode from safe mode is to restart the device using the power button. If the method does not work, to exit Safe Mode, remove the back cover of the gadget and remove the battery. Insert it back: after a minute the system will work as usual.

In this article you will encounter topics:

• What is safe mode on your phone?
• Why did the phone boot into safe mode?
• How to enable safe mode on your phone?
• How to disable safe mode on your phone?

Are you tired of your Samsung phone frequently going into Safe Mode? How do you deal when this happens? Getting out of safe mode is actually a pain in the ass. Since the phone keeps rebooting until it is turned off, you need to quickly fix this situation. Although it sounds quite complicated, booting into Safe Mode does not interfere with the normal functioning of the device. Also, you don't have to worry about whether the phone will be able to return to normal mode. Before talking about all this, let's learn more about Safe Mode on Android phones.

What is safe mode on your phone?

This is a security condition that occurs due to improper installation of any application or corrupted software. Safe Mode uses the phone's default boot settings, which, as a result, disables any third party application in order to run in this mode. Any personalization made on the phone or user settings will disappear from it. Even apps downloaded from the Play Store will show as deleted. Only pre-installed apps and features will be displayed, and any app or file that you manually downloaded will not be visible in Safe Mode. However, once you return to normal mode, all applications will be there and the phone will function normally as before.

This mode is usually used by developers to debug or remove any application that is interfering with the smooth operation of the phone. You will not be able to install or run third party apps in Safe Mode and a 'Safe Mode' watermark will appear at the bottom of the home screen. Sometimes users accidentally boot into Safe Mode without knowing what they have done. This often happens as a result of experimenting with the phone and hence they have no idea how to resolve the situation.

Why did the phone boot into safe mode?

The reason for getting into android safe mode may be different in each device. This may happen due to some third party application that is interfering with the normal functioning of the device. Or it could be some malicious link or application that is embedded in the software. From time to time, too much experimentation with your phone and third-party tools and apps can accidentally put your device into Safe Mode.

How to disable safe mode on your phone?

Whatever the reason for your phone getting into safe mode, there is a way to get out of it. We have a number of techniques to help you break out of safe mode. These methods can be applied to any android phone including Samsung Galaxy models like Galaxy Note, Galaxy Grand, Galaxy Grand Neo, Galaxy S series, Galaxy Y series and other models like HTC, Nexus, Motorola, Sony Xperia, LG , Lenovo, Xolo, Micromax, etc.

(1) Reboot your phone

Before using complex solutions, start with the simplest ones. Restarting your phone will help solve any technical problem, including disabling safe mode on your phone. Find the last installed app that caused your phone to go into safe mode and remove it before rebooting your phone. To disable Safe Mode, follow these steps:

• Go to Phone Settings > Application Manager.
• Find the app that is supposedly causing trouble > Click on it.
• Click on Uninstall and remove the application from your phone.
• Now press and hold the phone's Power button > Tap on Restart.

Wait for the phone to reboot to return to normal mode.

(2) Press and hold the Power button and Volume Down or Volume Up key

If you still have problems with your phone even after restarting it, try this method.

• Press and hold the Power button, click ‘Power Off’.
• Once the phone turns off, you need to turn it on again by pressing the Power button and Volume Down or Volume Up key at the same time.

(3) Removing the phone battery and SIM card to disable safe mode

If you still can't exit safe mode on your phone, then things are getting serious. But don't give up, you can try another method to disable Safe Mode on Android.

• Turn off your phone using the Power button.
• Remove the back cover > take out the battery and SIM card for 2 minutes. This will help remove any remaining charge from your phone.
• Now put back the SIM card, battery and back cover and turn on the phone by pressing the power button.

Safe Mode will no longer appear.

(4) Reset your phone to factory settings to exit safe mode on Android

If despite trying all these methods, Safe Mode still appears on your phone, then it is better to start again. Unless you are a developer and don't know how to debug an application, you shouldn't try to play with application codes to find what's broken. Better give your phone a fresh look.

Before you reset your phone, you need to back up all your files and folders and contacts from your phone book.

• Go to Phone Settings > Backup & Reset.
• Click on backup and run the backup process before doing the reset.
• Once the backup process is complete, select factory reset.
• Confirm the action and the phone will be like new.
• Once the phone restarts, Safe Mode will be disabled.

(5) How to disable safe mode using a hard reset (hard reset)?

Hard Reset is similar to factory reset, but it is done using the developer method. A hard reset erases everything from the phone, including cache and memory, which cannot be cleared by the factory reset method. A hard reset cleans your phone from a basic level to make it as good as new. To remove Safe Mode by doing a hard reset, follow these steps:

• First turn off your phone.
• Now, you need to boot the phone into recovery mode. How to do this depends on the model of your Samsung device. Typically, you need to press the Power button + Volume Up button + Home key to turn on the phone and hold the buttons until various options appear on the screen. For other brands such as HTC, Motorola and LG, press the Power + Volume Down buttons. You can also look up the button combinations for your specific model online or in your phone manual.
• Use the volume buttons on your phone to highlight ‘wipe data/factory reset’ and press the Power button to confirm your selection.
• Select Yes to confirm the reset > use the Power button to select Yes.

Wait a while until the reset is complete.

You can apply the above methods for all Samsung platform android phones including Samsung Galaxy 1, 2, 3, 4, 5, 6 and Samsung Galaxy Note 1, 2, 3, 4, 5, Galaxy tab, Galaxy Grand, Core, Ace, Pocket, Alpha, S Duos, Star, Young, Sport, Active, Zoom, Express, Fresh, Round, Light, Fame, Exhibit, Mega, Trend, Win, Y Plus, XCover, Premier, Mega and other phones.

How to enable safe mode on your phone?

The application of this technique varies for different phone models.

(1) Enable Safe Mode on Samsung Galaxy

• Turn off your device.
• Press the Power button to turn on the phone.
• During the startup procedure (when the Samsung Galaxy logo appears on the screen), hold down the Volume Down button.
• Your phone will boot into Safe Mode.
• Safe mode will not load any third party apps or games.

To return to normal mode, simply restart your phone.

(2) HTC

• Turn off and then turn on your phone by pressing the Power button.
• When the HTC logo appears on the screen, press and hold the Volume Down button.
• Hold it down until the home screen and safe mode appear.
• You will feel a vibration when the phone enters safe mode.

(3) Nexus 6

• Turn off your phone and remove the battery. Turn it on.
• Then power off again in the following way - when you click the power off button, a dialog box will appear, long press the power off option in the dialog box.
• Click OK when the Safe Mode Reboot confirmation window appears.
• The device will boot into safe mode.

(4) Sony Xperia

• Turn off your phone.
• Press the Power button to restart the device.
• Once you feel vibration during startup, hold the Volume Down button.
• Press and hold it until your device boots into Safe Mode.

(5) Motorola Droid

• Turn off your phone and slide out the hardware keyboard.
• Press and hold the Power button + Menu button on your keyboard.
• Hold the Menu button until you feel a vibration and a robot eye appears on the screen.
• The phone will boot into safe mode.

So, from this article you learned about how to enable/disable safe mode on your phone and how to work with it. The only difference between safe mode and normal mode is that installed games and third-party applications, including those downloaded from the Play Store, simply will not work in this mode, and you will not be able to install any third-party applications or games. Safe mode seems to move the device to a safe zone, and this property is used by developers and programmers to debug any application that is causing problems with the phone's software. Thus, you need to use your phone very carefully in this mode, and if you are not a developer, try not to corrupt the operating system files.